Latest retaining plate Tenders | Government retaining plate Tenders

Central Government/Public Sector

CTN :45293076

01 Jun, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of - set of items for bp-001.a -- contains item no. 3-4 (swivel pin, 44993700004, aa10108, 1 nos.), item no. 7 (roller brg. retaining plate, 14993700004, aa10119, 4 nos.), item no. 11 (end cover, 14993700004, aa10108, 4 nos.), item no. 15 (locking plate, 24993700003, aa10108/aa10119, 2 nos.), item no. 18 (key 14tkx22x15 lg, bp-001.18, aa10212, 2 nos.), item no. 22 (roller retaining pad, 44993700002, aa10108, 2 nos.) & item no. 27 (locking bracket, 34993700005, aa10108, 1 nos.) - | quantity - 300

corporations/Associations/Others

CTN :45046708

13 Jun, 2026 5.54 Crore

Multi City - Karnataka

Tender For corrigendum : supply of air suspension parts to the divisions of the nwkrtc. - nw-26-washer 22 mm - shock absorber , nw-26-washer 18 mm - shock absorber , nw-26-volvov air bellows, nw-26-volvo shock absorber-4, nw-26-volvo shock absorber-3, nw-26-volvo shock absorber-2, nw-26-volvo shock absorber-1, nw-26-volvo rubber bushing (shock absorber rubber bush), nw-26-volvo mounting plate air spring upper, nw-26-volvo gas spring side hatch 700n, nw-26-volvo bump stop, nw-26-volvo bellows-3, nw-26-volvo bellows-2, nw-26-volvo bellows-1, nw-26-volvo air spring (front bellow assy), nw-26-volvo air spring, nw-26-volvo air bellows-2, nw-26-volvo air bellows-1, nw-26-ud special nut bolt - engine, nw-26-ud rubber bushing, nw-26-ud bush - rear reaction top rod (75mm bush), nw-26-ud rear reaction rod top (rear v stay), nw-26-ud bush (v bar 85mm bush) - rear reaction rod , nw-26-ud rear reaction rod, nw-26-ud rubber spring - rear anti-roll bar , nw-26-ud reaction rod (front v stay), nw-26-ud reaction rod, nw-26-ud link rod - front (u bar), nw-26-ud front shock absorber assy, nw-26-ud bush (66mm) - front reaction rod , nw-26-ud front reaction rod, nw-26-ud front link rod, nw-26-ud bushing - front anti roll bar, nw-26-ud front and rear shock absorber, nw-26-ud ecas distance sensor, nw-26-ud connecting pin, nw-26-ud clamp (hanging bush), nw-26-ud bumper block, nw-26-ud altitude valve control rod assembly-3, nw-26-ud altitude valve control rod assembly-2, nw-26-ud altitude valve control rod assembly-1, nw-26-ud air spring (bellow) rear, nw-26-ud air spring (bellow) front, nw-26-tata/ley taper pivot bolt , nw-26-tata/ley connecting rod , nw-26-tata spherilastic bush taper lpo 1616, nw-26-tata bs6 shock absorber front, nw-26-tata bs6 bush/cut bush set - rear anti roll bar, nw-26-tata bs6 bush - rear anti roll bar , nw-26-tata bs6 bush - front anti roll bar, nw-26-taper sleeve, nw-26-steel piston 12 inch - single hole, nw-26-steel piston 12 inch - double hole, nw-26-spring washer - m16 , nw-26-split pin 3/16 x 2 1/2, nw-26-ley slf shock absorber-2, nw-26-rubber washer - bump stop, nw-26-rubber connector assly, nw-26-rubber bush - shock absorber , nw-26-rear axle sub compound link tc, nw-26-nylon tube - 8mm , nw-26-nylon tube - 6mm , nw-26-nylock nut - m16x2 , nw-26-nylock nut, nw-26-male elbow m12x1.5mm, nw-26-male connector, nw-26-machined washers - m24 , nw-26-machined washers , nw-26-machined washer ms - m16 , nw-26-m.bolero rear shock absorber, nw-26-m.bolero front shock absorber, nw-26-ley bs4 support bracket lh , nw-26-ley bs4 spherilastic bush, nw-26-ley slf u bolt m24x1.5x378mm, nw-26-ley slf suspension bolt (special bolt half threaded), nw-26-ley slf suspension bolt, nw-26-ley slf spigot , nw-26-ley slf spherilatic bush with pin , nw-26-ley slf shock absorber-1, nw-26-ley slf nyloc nut - m24x1.5 , nw-26-ley slf nut - suspention bolt, nw-26-ley slf anti roll cut bush rear , nw-26-ley slf alien bolt - m16x2x130mm, nw-26-ley bs4 shock absorber front 6.5t, nw-26-ley bs4 shock absorber, nw-26-ley midi bs4 stablizer holder asm, nw-26-ley midi bs4 bush - rubber-2, nw-26-ley midi bs4 bush - rubber-1, nw-26-ley midi bs4 rear shock absorber assy, nw-26-ley midi bs4 pull rod assy with bush , nw-26-ley midi bs4 front shock absorber assy, nw-26-ley midi bs4 bracket - suspension holder, nw-26-ley bs4 front shock absorber, nw-26-ley bs4 dowtee washer m26, nw-26-ley bs4 coller bush, nw-26-ley bs6 solenoid ptfc24v, nw-26-ley bs6 rear shockabsorber plate, nw-26-ley bs6 pallakki bellow air spring, nw-26-ley bs6 front shock absorber bottom-2, nw-26-ley bs6 front shock absorber bottom-1, nw-26-ley bs4 rubber pad assly, nw-26-ley bs4 retaining plate, nw-26-ley bs4 rear rubber air bellow 12 inch, nw-26-ley bs4 m16 spring washer , nw-26-ley bs4 levelling valve repair kit, nw-26-ley bs4 levelling valve assy , nw-26-ley bs4 air leveling valve lever, nw-26-ley bs4 air spring assly , nw-26-tata bs3 hex nut - m16x2, nw-26-tata bs3 hex bolt with nut -m16x2x100, nw-26-tat

CTN :45296154

01 Jun, 2026 NA

Darjeeling - West Bengal

Tender For supply of gun pit with ohp - tmt bar fe 550 grade 8mm dia , tmt bar fe 550 grade 10mm dia , tmt bar fe 550 grade 12mm dia , tmt bar fe 550 grade 16mm dia , binding wire of 0.9mm dia , plywood 8 feet x 4 feet x 18mm bwr grade , plywood for roof shuttering 8mm waterproof , plywood for wall shuttering 14mm , scaffolding pole adjustable 7 feet long , nails 2 inch, 3 inch and 4 inch 10 kg each , pre-fabricated mild steel door of size 5300mm x 3500mm outer frame made out of isa 50x50x6mm and door shutter frame of isa 40x40x6mm and all as stiffner of isa 40x40x5mm as per drawing , pre- fabricated mild steel door of size 1300mm x 6000mm outer frame made out of isa 50x50x6mm and door shutter frame of isa 40x40x6mm and all as stiffner of isa 40x40x5mm as per drawing , app bitumen membrane sheet of grade 2504 thickness 3.0mm type film, size 20mx1m, minumum weight 2.25kg per sqm , deck sheet curved shape 1.20mm tr-50 including all necessary clamps fittings and fixtures , quick setting compound , water proofing compound in 1 kg packing , fire resistance paint for internal surface , fire resistance primer for internal wall surfaces , synthetic enamel painting to steel surfaces , red oxide primer. , bitumen 80 oblique 20 grade , hdpe pipe 75mm dia best quality , fire extinguisher a and b and c type portable net 2 kg capactiy cylindrical isi marked , supply solar lantern model no ms122 solar lantern contains battery, solar panel, led bulbs , lighting conductors set complete with all accessories as per details given , prefab steel ms plate of size 1000x1000x4mm to frame of size 1050x1050mm , hdpe hose pipe 25mm dia corrosion resistant for water supply pumping water with min thickness of 0.25mm with working pressure 14.22 psi and bursting pressure 28.44 psi , 1hp petrol water pump of capacity 35cc 4 stroke pertol engine 25mm self priming water pump set , pcc solid block 400x200x200mm , 100mm thick interlocking tiles machine pressed precast concrete paver block , cement ppc oblique opc 53 grade in poly bag of 50 kg each , sand coarse conforming to is-383 , stone aggregate coarse 20 mm conforming to is-383 , stone aggregate coarse 40 mm conforming to is-383 , hesco basket , transparent pipe 5mm dia bore for water leveling , iron bar 600mmx16mm , industrial safety helmet , hammer weight 500 gms with wooden handle , plaster trowel with wooden handle isi marked , fish line best quality , wood cutting blades , iron cutter blades 14 inch , plumb bob iron best quality , galvanised iron pan mortar 18 gauge 16 inch dia minimum weight of 1 kg , rammer earth with handle , picks axes with chiesel and point ends , showel square nose 14 gauge tata high carbon steel , painting brush 100 mm best quality , synthetic tarpaulin 550 gsm of size 30ft x 30ft , multipurpose non-slip rubber reusable gloves , brick trowel steel 305 mm , heavy duty openable props oblique scaffolding made of ms pipe of 60 and 48mm dia , ms centering plates of size 90cm x 60cm of thickness 14 guage , portable ms body needle vibrator machine with power 3 hp to 5 hp

CTN :45292807

02 Jun, 2026 NA

Sonitpur - Assam

Tender For supply of living shelter dsls 2461 - dsls living pir shelter size 21 point 35m x 6 point 1m x 1 point 5m enclosed verandah front , cement 43 grade opc packed in hdpe bag each 50 kg wt , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , coarse aggregate 40 to 63mm graded , stone for rr masonary less than 6 inch , water proofing compound , mild steel bars of size 6 to 8mm dia , mild steel bars of size 10 mm and above dia , oil bound distemper , cement based paint snowcem , ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick , ms binding wire , white cement , wooden planks for shuttering iind class wood of size 3 point 0 x 0 point 30 x 0 point 026 , peg set of six fitted with galvanised screws , curtain arrangement drapery and rod made of 25 mm dia and 1600 mm long , stone boulder 9 inch to 12 inch , pvc pipes 75mm each 3 mtr long , distribution box 8 way spn comma 240 volts copper bus bar and neutral link earthing stud , distribution box 4 way spn comma 440 volts copper bus bar and neutral link earthing stud , mcb tpn 440 volts 40 amps , mcb spn 240 volts 32amps , mcb 6 to 32 amps , pvc tape 19mm wide 5 m long , cable pvc insulated electric cables heavy duty copper conductor of size 1 point 5 sqmm single core , cable pvc insulated electric cables heavy duty copper conductor of size 4 sqmm single core , cable pvc insulated electric cables heavy duty copper conductor of size 2 point 5 sqmm single core , pvc casing capping of size 1 inch medium grade snow white , pvc casing capping of size 3 oblique 4 inch medium grade snow white , switch piano 5 amp 230 volts flush type one way snow white , led tube light fittings 18 oblique 20w rechargeable 230v box type 4 feets , screw full thread 6 x 19mm 200 nos per pkt , pvc switch board snow white size 7 inch x 4 inch for sockets and switches , pvc switch board snow white size 8 inch x 10 inch for main switches db , pvc l bend and t junction joint for pvc casing and capping , switch socket combination snow white multipurpose 2 in 1 comma 15 amp 230 volts , switch socket combination snow white 5 amp 230 volts , service bracket 40mm dia gi tubing medium grade 1 point 5 mtr long , service cable pvc insulated aluminium conductor heavy duty 25 sqmm 4 core , ceiling rose three terminal snow white , led bulk head fitting with led lamp 10 watts , pvc flexible wire copper conductor multi stranded 0 point 0016 oblique 76 , pvc flexible conduit pipe 15 mm dia , pvc round oblique square block , fire extinguisher of one kilogram capacity dry power type along with its accessories , change over switch 32 amp 4 pole tpn , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long pipe , gi wire 4 mm diameter for earthing , charcoal , salt normal , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled , aluminium strips 25 x 3 point 0 mm , galvanized iron strip 32 x 6 mm , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt , individual standalone plastic body smoke alarm with adequate provision for fixing on wall oblique ceiling oblique roof , individual standalone plastic body heat alarm with adequate provision for fixing on wall oblique ceiling oblique roof , fire ball extinguisher of 1 point 3 kg wt with suitable provision for wall mounting , double sleeping bunk alongwith rexene sleeved mattress , steel bed side locker of size 1000mm x 1520mm x 450mm , study chair of size length 56 cm comma height 82 cm and width 56 cm , study table of size 4 x 2 wooden top round tube structure with three drawers , looking mirror of selected quality frameless of size 600 x 450 x 5mm , water dispenser of 230 v 500 watts without refrigerator with normal col

CTN :45138683

27 May, 2026 1.26 Crore

Bathinda - Punjab

Tender For bid to ras corrigendum : supply and construction of superstructure of ug coy comd post , supply and construction material , supply and construction electronic , supply and construction of earthing items , supply and construction of lightening conductor , supply and construction of furniture items - cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1969 (make-birla gold/ambuja /ultratech/acc/jk/dalmiya) , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , hard core 63-90 mm , stone boulder 9 to 12" , mild steel bars of size 16 mm and above dia conforming to is 432 (part (1) 1982 (make tata/sail/jsw) , mild steel bars of size 12 mm and above dia conforming to is 432 (part 1) 1982 (make tata/sail/jsw) , mild steel bars of size 10mm dia conforming to 15 432 (part 1) 1982 (make tata/sail/jsw) , mild steel bars of size 8 mm and above dia conforming to is 432 (part 1) 1982 (make tata/sail/jsw) , water proofing compound confirming to is 2645-2003 (make pidilite/dr fixit/fevicol) , gl binding wire (tata/sail/jsw) , wooden plank for shuttering lind class wood of size 3.0x0.30x0.026 , wooden scantling various size , steel props of size 2 mtr long. 80 mm dia, adjustable upto 4 mtr height nad as directed , nails various sizes , (a) ms rhs of size 100x50x45 , (b) ms rhs of size 50x25x2.9 , (c) ms rhs of size 96x48x3.2 , (d) ms flat 40x5 mm thick for wind the tata/sail.jsw , (e) ms plate of size 10mm thick , idi ms plate of size 8mm thick , 10) m5 angle of size 40x40xň for cleat , (f) ms plate of size 12mm thick , ms nuts and bolts of length 100mm fully thread suitable for 10 mm dia mats including two numbers of washers and 25mm of shank and two nos of washers 3 mm thick complete ali as directed , ppgi sheet, 0.55 mm thick of size 10ft x3 ft of make sail/tata/jindal incl treating galvanised surface with mordant solution and two coat of synthetic camoglage paint over one coat of red oxide primer of make berger/asian/nerolac) , ppgi noge sheet of 0.50mm thick of 90cm wide of make sail/tata/jindal incl treating galvanised surface with mordant solution and two coat of synthelic camoglage paint over one coat of red oxide primer of make(berger/asian/nerolac) , self taping steel screw half thread with rawl plag of 1 1/2 size (is! marked) (100 nos/pkt) , door size (2000x1000mm double wal ms sheet for door (2mm thick) frame (chowkat) made of steel equal angle iron 55x55x6mm (151 grade) shutter made up of steel equal angie iron frame 35x35x5mm (151 grade) flat con for stiles (75mm width and 5mm thick) holdfast 450mm long welded either side of anglle iron frame including hinges (06 nos) , tower bolt 150mm long 104 nos: bow handles (04 nos) and sliding bolt 12mm dia 300 mm long with lockung arrangernent complete both side and openable outside complete along the wall. , note the door shall be made of steel suitable painted in olive green colour with two coats of red oxide primer , ventilator with grill of size (1500 x 600mm) ventilator (loop hole) frame for steel angle of size 35x35x5mm (1s1 grade) gral made of tmt bar 12mm dia with weiding the items shall be suitably painted with weather resistance and fire prouf paint over one coat of red uxide primer (make tata/spat/sail , acrylic emulsion paint of approved brand on new concrete surface of make berger/asian/nerolag , painting brush 4"(15) marked) , bila white wall care putty (water resistant white cement based putty) for concrete/mortar walls/ceiling make jk putty birla white , cerment hased paint snowcemi make berger/nemlac/asian) , o bound distemper (washable quality) of proprietary brand of (make , ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick make (johnson kajana orient) tist quality confrorning to 15 150-2006 , white cement confirming to 18 8042/1969 (make acc/birla white ambuja) , curtain arrangement drapery and ind made of 25 mm dia and 1600 mm long pre coated ms pipe with fancy type end

CTN :45275091

28 May, 2026 5.38 Lacs

Chandigarh - Chandigarh

Tender For providing & fixing of sanitary items and allied work in model jail sector- 51, u.t. chandigarh (fansi chakki, midday meal, music room) - excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : .2.10, all kinds of soil .2.10.1, pipes, cables etc, not exceeding 80 mm dia. .2.10.1.1, pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia metre .2.10.1.2, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : .4.1, 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.4, 1:5:10 (1 cement : 5 coarse sand (zone-iii) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.10, brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and size in : .6.4, cement mortar 1:6 (1 cement : 6 coarse sand .6.4.2, providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (size 300mm x 600mm) .8.31, providing and fixing aluminium sliding door bolts, isi marked anodised anodic coating not less than grade ac 10 as per is : 1868), transparent. .9.96, 250x16 mm .9.96.2, as per detail attached ., providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete .9.97, 200x10 mm .9.97.2, as per detail attached ., providing and fixing aluminium handles, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : .9.1, 125 mm .9.100.1, as per detail attached ., providing and fixing pressed steel door frames conforming to is: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including m.s. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by engineer-in-charge: .10.14, profile b .10.14.1, fixing with adjustable lugs with split end tail to each jamb .10.14.1.1, providing and laying polished granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer-in-charge. .11.56, polished granite stone slab of all colour and texture exceptblack,

CTN :45224280

03 Jun, 2026 NA

Kinnaur - Himachal Pradesh

Tender For corrigendum : supply of excavation , pcc 1 is to 4 is to 8 , pcc 1 is to 3 is to 6 , rcc m40 side walls of entire building including retaining walldrawing , rcc m30 foundation or floor or roof slab and colume padestal , mild steel tmt bar , ms tubes , shuttering plywood , anchor bolt 25mm dia and 850mm , boulder soling , rolling shutter , fire proof painting work on rcc structure , fire proof painting work on ms structure , misc for dowels tube and tape and wire loop , electrical work as specification , flame proof light , smoke detectors , fire proof central air conditioning system , lightening conductor , fire alarm system , fire fighting system , ms plate 10 mm for roofing layer , ms plate 15 mm for roofing layer , shredded rubber 150 mm crumb rubber tiles size 500 x 500 x 50 mm , pbs roll is 1322 to 62 weight min 3 kgs per sqm , 75mm dia pvc pipe

corporations/Associations/Others

CTN :45275080

04 Jun, 2026 NA

Panaji - Goa

Tender For ghrssidc/e-t/2026-27/731 - dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm., dismantling cement asbestos celotex or other ceiling or partition hard broad wall including stacking of serviceable materials and disposal of unserviceable materials within 50 mts. lead., dismantling doors, windows and clearestory windows (steel or wood) shutters including chowkhats architrave holdfast etc. complete and staking within 50 mt. leada.of area 3 sq.m. and below, clearing debris includes civil/elect items from site and disposing the debris 10km away from the site including loading unloading labour charges and clearing the site good for work etc.complete, providing and fixing of double leaf door with cnc cutting as per design made in -20mm plywood with 3mm thick veneer using ss pvd coated t patties and pu paint and melamine polish using ply of century or equivalent brand including all necessary hettic soft closing fittings etc. complete, providing and fixing of single leaf door made in -12mm plywood with 3mm thick veneer using ss pvd coated t patties and pu paint and melamine polish using ply of century or equivalent brand including all necessary fittings etc. complete, providing and fixing of partition board paneling with aluminium frame work of section size 50mmx25mm vertically and horizontally at 600mm c/c with 12mm thick plywood, top with 3mm thick veneer sheet and using ss pvd coated t patties and pu paint and melamine polish for smooth finish, using century ply or equivalent brand for panelling and fixing with necessary screwing and supports etc.complete, supplying of fire sensor / smoke detector-10nos / existing sprinker replacement / relocation / wiring / hooter panel etc, providing and fixing vitrified double glazed finished of 10mm thick tiles of size 8ft x 4ft in floor, treads or riser of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry filling tile joints with matching pigment and make of of kajariya/ simpolo of any colour as specfied by engineer in charge etc.complete., proving and fixing false ceiling of 1.5mm thick aluminium powder / anodised / painted / coated -profiled panels mounted on ms/ gi frames for support and painted / powder coated chanels / with provision for ac trap, door and light fixing,as per engineer incharge etc.complete, providing and laying in position (1:11/2:3) reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1 coarse sand:3 graded stone agg 20mm nominal size) c. in beams, suspended floors, roofs having slope upto 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level, supplying and fixing of window / roller blind made in100% polyster fabric design plain and colour as per engineer in charge, providing and fixing of 3+2+1+1 seater sofa set made in sal wood frame with high density foam as design as per drawing and engineer in charge, supplying and fixing of designer artifacts showpiece design as per drawing and engineer in charge, supplying and fixing of nylon based carpet 5 mm thickness with backing design as per drawing and engineer in charge, supply and placing in position artificial planters with ceramic pots etc complete as shown in the drawing and as directed engineer incharge., design & supply of signages made from 2mm thick external grade acp sheet of size (wall mounted) with high grade plotter-cut/cnc-cut vinyl & auto-glow vinyl pasted lacquering of letters/pictogram on front side of the plate, of varying colours as per detail drawing and engineer in charge., supplying and fixing of pa - speaker wiring with 6nos ceiling mount speaker to be connected to existing pa system including cabling ,fittings accessceries and necessary supports etc complete., supplying and fixing of light fittings of make -hybac /haffle /phillips / panasonic/ anchor/

CTN :44713629

25 May, 2026 NA

Ernakulam - Kerala

Tender For corrigendum : tender for supply of set of sealing ring for smc 2 65v 1 , crank case heater assembly 2 , oil pump assembly 3 , crank shaft assembly 4 , piston assembly set 5 , discharge valve assy for r 22 6 , set of neoprene o rings 7 , bushing std 8 , suction valve ring plate 9 , valve spring 10 , suction valve retaining plate 11 , connecting rod bearing 12 , connecting rod bush 13 , oil strainer 14 , connecting rod assembly 15 , castle nut 16 , set of gasket for smc 2 65v 17 , shaft seal assembly 18

CTN :45225392

05 Jun, 2026 NA

Kinnaur - Himachal Pradesh

Tender For supply of excavation , pcc 1 is to 4 is to 8 , pcc 1 is to 3 is to 6 , rcc m40 side walls of entire building including retaining walldrawing , rcc m30 foundation or floor or roof slab and colume padestal , mild steel tmt bar , ms tubes , shuttering plywood , anchor bolt 25mm dia and 850mm , boulder soling , rolling shutter , fire proof painting work on rcc structure , fire proof painting work on ms structure , misc for dowels tube and tape and wire loop , electrical work as specification , flame proof light , smoke detectors , fire proof central air conditioning system , lightening conductor , fire alarm system , fire fighting system , ms plate 10 mm for roofing layer , ms plate 15 mm for roofing layer , shredded rubber 150 mm crumb rubber tiles size 500 x 500 x 50 mm , pbs roll is 1322 to 62 weight min 3 kgs per sqm , 75mm dia pvc pipe

Retaining Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others