Latest retread consumable Tenders | Government retread consumable Tenders

CTN :40477768

16 Jun, 2025 NA

Delhi - Delhi

Tender For procurement of equipment and accessories for navy shooting team - shooting glasses for 25m pistol shooting events with 02 filters yellow and violet , shooting glasses for 50m pistol events with 02 filters yellow and violet , pistol protector hard case with foam m size 22 x 14 x 09 inches , pistol grip modification tool box dremel tool machine , shooting shoes for pistol shooters , trigger weight with 500 gm and 1000 gm wights for pistols , firing pin point 22 walther gsp expert , extractor point 22 walther gsp expert , ejector point 22 walther gsp expert , extractor point 32 walther gsp expert , ejector point 32 walther gsp expert , firing pin point 22 std pardini pistol , extractor point 22 std pardini pistol , firing pin point 32 cf pardini pistol , extractor point 32 cf pardini pistol , velocity meter for air weapon , wireless electronic simulator training system with optical sensor for rifle and pistol shooting , metal measurement box as per issf rules for 25 meter pistol events , metal measurement box as per issf rules for 10 meter pistol events , electronic trigger circuit for point 177 electric air pistol for right hand , right hand grip for 10m air pistol , right hand grip for 25m std pistol , spare bolt for point 22 rapid fire pistol pardini rf , spare bolt for point 32 center fire pistol pardini hp , moly grease for sear hammer engagement 2.8oz tube for pardini pistols , magazine loader for 25m pardini pistols , point 177 air pellets rws r10 pistol , shooting thermal inner shirt with polartec material , front sight duovario 2 point 8 to 4 point 8 in and 6 point 4 to 9 out m 18 diameter , back sight and rearsight for 50 m bleiker rifles for 3p events , shooting gloves , shooting sling , filter with twin polarization and 10 colour , bleiker butplate with butt hook match 3 super grip , bleiker cheek piece long ratchet cheek piece , bleiker rifle weight bar weight 130g , 2 point 300bleiker bolt , palm rest with 05 dimensions , barrel cleaning bud 06mm felts , cleaning oil plum silvent , cleaning oil can apply to warmed metal parts to seal pores with a tenacious coating of teflon , contact iv buttplate walther air rifle , shooting mat top grip , compressed air cylinder 300 bar 9 ltr , sight raiser , barrel extension with tuner , shooting stand , balance board for muscle balancing exercise , bolt protection for bleiker rifles , point 177 air pellets rws r 10 rifle

Central Government / Public Sector

CTN :40311367

05 Jun, 2025 NA

Panipat - Haryana

Tender For corrigendum : tender for supply of restriction orifice for p25 project at iocl panipat refinery --field-applied coal tar enamel pipe coating systems: application, performance, and quality control , coatings and linings over concrete for chemical immersion and containment service , corrosion control of offshore structures by protective coatings , control of external corrosion on underground or submerged metallic piping systems liquid-applied internal protective coatings for oilfield production equipment , extruded polyolefin resin coating systems with soft adhesives for underground or submerged pipe , discontinuity (holiday) testing of new protective coatings on conductive substrates holiday detection of fusion-bonded epoxy external pipeline coatings of 250 to 760 um (10 to 30 mils) , measurement of protective coating electrical conductance on underground pipelines offshore platform ballast water tank coating system evaluation , test procedures for organic-based conductive coating anodes for use on concrete structures , aboveground survey techniques for the evaluation of underground pipeline coating condition , laboratory methods for the evaluation of protective coatings and lining materials on metallic substrates in immersion service , evaluation of internal plastic coatings for corrosion control of tubular goods in an aqueous flowing environment , evaluation of internal plastic coatings for corrosion control of tubular goods by autoclave testing , holiday detection of internal tubular coatings of 250 to 760m (10 to 30 mils) dry film thickness , exterior protective coatings for seawater immersion service

Central Government / Public Sector

CTN :40441016

05 Jun, 2025 1.11 Crore

Haldia - West Bengal

Tender For custom bid for services - 9040c25b52 annual repair contract for process scheme jobs in instrumentation department on open tender basis- equipment hiring charges - 1 hydra 10t (hired) 4640, 2 hydra 15t (iocl owned) 4944, 3 hydra 25t (hired) 5551, 4 crane 50t (hired) 10785, 5 crane 75t (hired) 10785, 6 forklift ( iocl owned) 1738, 7 180t crane (hired) 18296, 8 articulated boom (hired) 2208, 9 tractor and trailer (hired) 2076, supply of materials for secured advance- civil items: a. items against which secured advance can be granted :, 1. bricks, 2. stone and brick aggregates, 3. stones, 4. finished products of brass, iron or steel such as doors and window frames,, wiremesh, gate, gi sheets., 5. pre-cast rcc products such as pipes & fittings, jail, water storage tanks., 6. doors and windows fittings., 7. pipes and sanitary fittings of gi, ci, sci and hci., 8. metallic doors / windows., 9. ms gratings., 10. reinforcement bars., 11. hydraulic door closers., 12. structural steel., 13. flushing cisterns., 14. ci valves, sluice gates etc., 15. fencing materials chain-link / barbed-wire etc., 16. anchor bolts., b. items against which secured advance can be granted, obtaining insurance over them from the contractor:, 1. kitchen sink china vitreous, flush back for wash basin vitreous china water closet, and pedestal type water closet vitreous china, urinals., 2. glazed tiles, terrazo tiles and similar articles., 3. marble slabs., 4. asbestos cement products., 5. finished timber products such as doors, windows, flush doors, particle boards, (subject to the mandatory tests being satisfactory)., 6. bitumen in sealed drums., 7. bitumen felt., 8. polythene pipes & fittings, sanitary fittings and pipes of sw, porcelain and, chinaware materials., 9. laminated / safety one way vision and bullet proof glasses., 10. chemicals required for anti-termite treatment (in sealed drums)., 11. paints, varnishes, distempers, pigment, spirit., 12. cement tiles., 13. acid proof tiles., 14. bitumen products required for mastic flooring etc., 15. water proofing compound such as cico etc., 16. materials for epoxy finishing etc., electrical items, a. items against which secured advance can be granted :, 1. steel conduit, 2. gi pipes, 3. ci boxes, 4. ic boards., 5. switchgears (air circuit breakers and air break switches), 6. a c s r conductors, 7. a.c. plant & machinery., 8. pumps, 9. generating sets (without oil), 10. gi strips., 11. street light poles (steel), 12. cable trays., b. items against which secured advance can be granted, obtaining insurance over them from the contractor:, 1. transformers, 2. switch gears ( oil filled), 3. lt & ht cables, 4. fans, 5. store & dry batteries, 6. insulation tapes., 7. epoxy cable compounds., 8. electric light fittings., 9. wood battens, casing & capping and wooden boards., 10. flexible wires., 11. pvc materials, 12. rubber materials, 13. glass wools, thermocol and other insulating materials., 14. porcelain ht and lt insulators., 15. electric heat tracing tapes., mechanical items, a. items against which secured advance can be granted :, 1. structural steel., 2. plates., 3. pumps / motors, vessels etc., diesel engine, side entry mixers, suction heaters &, any other mechanical equipment., 4. refractory bricks., 5. ss foil., 6. pipes / pipe fittings., 7. gratings., 8. valves, hydrants, monitors., 9. aluminium sheet., b. items against which secured advance can be granted, obtaining insurance over them from the contractor:, 1. bitumen, 2. wrapping & coating material, 3. primer / paint, 4. foam / foam seal material, 5. guniting material, 6. insulation & refractory materials other than bricks., instrumentation items, a. items against which secured advance can be granted :, 1. structural steel, 2. ms sheet / gi sheet, 3. pre-fabricated trays, 4. pipes / tubes / fittings, b. items against which secured advance can be granted, obtaining insurance over them from the contractor:, 1. ss / copper tube

Central Government/Public Sector

CTN :40423780

26 May, 2025 NA

Porbandar - Gujarat

Tender For calibration of special hull equipment-"h-547: - calibration of following equipment is to be carried out and certificates are to be provided: -ser. equipment qty (no.)(i) porta tox h2s gas detector (digital) 01(ii) fixed gas detectors (digital) 02(iii) ultrasonic thickness gauge (digital) 01(iv) porta scanner (ultrasonic water integrity indicator) 01(v) elco meter (coating thickness gauge) 01(vi) oxygen meter 01"

corporations/Associations/Others

CTN :40424251

28 May, 2025 95.5 Thousand

Chandigarh - Chandigarh

Tender For providing and fixing of children play equipment at park near house no.3722 sector -46,chandigarh under m.p.lads (work no.36 18 ls) - m.a.p.s (jumbo 3x1)sr. no. description quantity1 standard see saw 12 double swing 13 wave slide 5 ht. 1area : 4m x 4msafe area : 5m x 5m(jumbo 3 x1) set consist of :standard see saw:this item provides a good entertainer for children. the seats of the see saw are made from rotational molding and the see saw stand is fitted on 40 nb gi pipe. the level is of 15 nb & 25 nb pipes. the bearing used is a heavy-duty bush typedouble swingin the double swing the leg support is bending made of 40nnb gi pipes and top pipe is 50nb gi pipes with gi junction box with powder coating. the swing seat is made up of 10mm thick rubber belt. the belt seat is affixed on 6mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp.wave slide:the wave slide chute shall be made up of 4mm thick of fiber reinforced plastic with self-pigmented. the wave shape should be in such manner that it will not give any jerk or bump to the rider. the chute has its end such as it causes safe landing of the child. the landing portion should be in horizontal with respect to the ground. there should be support provided made up of 25 nb gi pipe., wide slide ssarea : 3m x 1.2msafe play area : 4 m x 2.2 mplatform height : 1.2 mthe wide slide on of the attractive slides of its kind. the chute is made of 14 swg ss/gi sheet. the stainless steel used is of 304 grades. the chute is supported by 40x5 ms angles. this chute is attached to the platform made from ss/g sheet. the platform is supported by 40 nb gi pipe. the ladder is made using 20 nb and 25 nb gi pipes. the steps for the ladder are of 20 nb gi pipes. the sliding height is 2.4m. the landing support used is made up of 25 nb pipe. the handrail of the chute is made up of 20nb power coated gi pipe. the slide is innovative wide slide on which at a time 3 kids can slide., swinging loop rung rec. age : 5-14 yrs.the area : 3.2m x 0.9 msafe play area : 4.2m x 1.9 mthis is another of item that provides hanging as well as swinging experience to the children . the frame is fabricated out using 40 nb and 25 nb powder gi pipes. there are 09 triangles loops of 15 nb which are attached to the top pipe of the frame using s hook. the ladder used is designed to the side support pipe itself.

State Government

CTN :40435240

29 May, 2025 NA

Ranchi - Jharkhand

Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 9 numbers of district level water testing laboratories of jharkhand a-dumka zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230a15 volts a/c), stirring capacity: 50-1500 rpm, capacity of stirrer: 2 litre, plate size: 18.4x18.4 cm(approx.), make & model: branded, bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is stan

Corporations And Associations And Others

CTN :40351350

27 May, 2025 1.56 Crore

Delhi - Delhi

Tender For supply and installation of open gym equipments under mlalads funds for various locations of parks in municipal corporation of delhi - supply & installation of open gym equipments under mlalads funds for various locations of parks in municipal corporation of delhi, seated puller /pull chair made from c class g.i pipe. dimensions: - 1900mm (length) x 740mm (width) x 1920mm. (height). safe area:- 1.2mtr x 3mtr. seated puller equipment made up of c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the center pipe is of 100nb made from c class g.i. pipe. bottom support is of m.s. round plate of dia 250 mm & 10mm thickness welded. all linkages are made up of 25nb c class g.i. pipe. the handle frame is of 32nb c class g.i. pipe. the seat frame is of 32nb c class g.i. pipe. to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush used. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class. welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. foundation cover closing cap is made from injection moulded plastic lldpe / hdpe. the seats and back rests are fitted on the outer frames are made up of m.s. sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.closing caps are made up of from injection moulded plastic lldpe / hdpe.pins used of diameter 25mm and 17mm are made up from sae 8620 bright material. the bearings used are of 6205 2rs1 and 6203 2rs1 permanent lubricated sealed bearing of reputed brand.high tensile steel with galvanized nuts & bolts are used for assembly.thecirclips used for assembly are of a16. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel / berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size), cross trainer /elliptical exerciserdimensions: - 1320mm (length) x 600mm (width) x 1750mm. (height). safe area: - 1.77 x 1.2mtr. cross trainer equipment made from c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the main frame pipes are of 80nb c class g.i. pipe with single bend pipe with 250mm radius. the bottom support of m.s. round plate of dia 250 mm & 10mm thick. the handle frame is made up of 25nb c class g.i. pipe. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. to build structure bushes are used which are made from m.s. seamless pipe of 60mm od with 5 mm thickness. the footrests are made from injection moulded plastic lldpe / hdpe. closing caps are made up of injection moulded plastic lldpe / hdpe. pins used of diameter 35mm, 25mm, and 17mm are made up from sae 8620 bright .the bearings used are of 6007 2rs1 62052rs1 and 62032rs1 permanent lubricated sealed bearing of reputed brand. high tensile steel with galvanized nuts and bolts are used for assembly. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel / berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse

Central Government And Public Sector

CTN :40400948

06 Jun, 2025 NA

Bengaluru - Karnataka

Tender For supply of cut resistance hand gloves with heavy duty nitrile coating as per 6116 119.00 pair 5.0% 1000 en 388:2003 for use in machining of equipment. complete specification as given below: en:388 (3111x) size 10 length: appx. 27cm. construction five finger glove, canvas cuff partially coa ted. (1) base glove; jersy cotton. coating nbr (nitrile butadine rubber) coating colour: blue , finishing: fully coated, cuff style:safety cuff. liner material: cotton jersy, construction: dipped cut and sewn length:260mm(+- 5ml) ressistance: good resistance to oil & grease. not e: following details must be available on each glove: (1) ce confirmity symbol. (2) mechanical risk pictogram with en standard & digit code. (3) manufacturers name. [ warrant y period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :40338509

21 May, 2025 95.5 Thousand

Chandigarh - Chandigarh

Tender For providing and fixing of children play equipment at park near house no.3722 sector -46,chandigarh under m.p.lads (work no.36 18 ls) - m.a.p.s (jumbo 3x1)sr. no. description quantity1 standard see saw 12 double swing 13 wave slide 5 ht. 1area : 4m x 4msafe area : 5m x 5m(jumbo 3 x1) set consist of :standard see saw:this item provides a good entertainer for children. the seats of the see saw are made from rotational molding and the see saw stand is fitted on 40 nb gi pipe. the level is of 15 nb & 25 nb pipes. the bearing used is a heavy-duty bush typedouble swingin the double swing the leg support is bending made of 40nnb gi pipes and top pipe is 50nb gi pipes with gi junction box with powder coating. the swing seat is made up of 10mm thick rubber belt. the belt seat is affixed on 6mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp.wave slide:the wave slide chute shall be made up of 4mm thick of fiber reinforced plastic with self-pigmented. the wave shape should be in such manner that it will not give any jerk or bump to the rider. the chute has its end such as it causes safe landing of the child. the landing portion should be in horizontal with respect to the ground. there should be support provided made up of 25 nb gi pipe., wide slide ssarea : 3m x 1.2msafe play area : 4 m x 2.2 mplatform height : 1.2 mthe wide slide on of the attractive slides of its kind. the chute is made of 14 swg ss/gi sheet. the stainless steel used is of 304 grades. the chute is supported by 40x5 ms angles. this chute is attached to the platform made from ss/g sheet. the platform is supported by 40 nb gi pipe. the ladder is made using 20 nb and 25 nb gi pipes. the steps for the ladder are of 20 nb gi pipes. the sliding height is 2.4m. the landing support used is made up of 25 nb pipe. the handrail of the chute is made up of 20nb power coated gi pipe. the slide is innovative wide slide on which at a time 3 kids can slide., swinging loop rung rec. age : 5-14 yrs.the area : 3.2m x 0.9 msafe play area : 4.2m x 1.9 mthis is another of item that provides hanging as well as swinging experience to the children . the frame is fabricated out using 40 nb and 25 nb powder gi pipes. there are 09 triangles loops of 15 nb which are attached to the top pipe of the frame using s hook. the ladder used is designed to the side support pipe itself.

Central Government / Public Sector

CTN :40331016

27 May, 2025 NA

Tirupati - Andhra Pradesh

Tender For supply of interlock washers for axle end equipment of vande bharath train set wheel (ver 2.0) suitable for m16 hex agonal head screw. as per icf drg no ts/mc 89002007 under note point 3 & 4 : 1. interlock washer shall be supplied a s pairs glued together to fasten as such. 2. interlock washer shall be make nord-lock. 3. zinc flake coating (geomet321 or equivalent) with top coat, without any hexavalent chromium, without any integrated or separately added lubricant, m inimum salt spray test life of 1000 hours shall be ensured. make: washer shall be of nord-lock only. [ warranty pe riod: 30 months after the date of delivery ]

Retread Consumable Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors