Tender For state plan-state plan 2025-2026-procurements of equipments for wtps-supply and installation of water quality testing equipments at wtps under ws section 1 attingal-general civil work-general civil work - purchase of jar test apparatus, od229090/2025-2026:supply and installation of the jar test apparatus must meet the following specifications. no. of. stirrers -6 minimum, rpm- 25 to 200 rpm or better, capacity of single stirrer unit-, control—digital control (digital timer & rpm counter), stirrer paddle material (with appropriate corrosion protective coating) - stainless steel, power single phase (220 - 240 volts), illumination—fluorescent tube such that illumination should not contribute heat to the system and entire equipment must have a minimum warranty period of two years, purchase of ph meter, od229087/2025-2026:supply and installation of bench top ph meter must with the following specifications: (a) regarding ph: the range must be between 0.00 to 14.00 ph or better, the resolution 0.01 or better, the accuracy 0.02 ph or better, the calibration points should be atleast 3 points, buffer option should be suitable for standard buffers. (b) regarding mv: range 0 to 1999 mv, resolution 1 mv or better, accuracy mv or better (c) regarding temperature: range 0.0 to 99 degrees celsius or better, resolution should be 0.1 degrees celsius or better, and accuracy of 0.5 degrees celsius or better. (d) the electrode of the ph meter must be a single junction, body plastic/unbreakable material, gel-filled electrode, and atc probe, and the electrode stand should also be provided by the supplier. (e) ph meter must also have lcd/led display, a dual display of ph or mv with temperature, with auto buffer recognition, offset/slope should be displayed, power 230v 10%, must provide a minimum of 100 ml of buffer solutions of ph 7.0, ph 4.0, and ph 9.2. the supplier must provide all accessories for smooth functioning of the equipment and a hard copy of the user manual with instrument specifications. the ph meter must have a minimum warranty of one year for the meter and a minimum of six months for the electrode. the calibration at the time of the installation must be done by the supplier., purchase of conductivity-tds meter, od229088/2025-2026:supply and installation of conductivity - tds meter with conductivity range of at least 0.1 s to100 ms, resolution : 0.001 s and tds range of 0.1 ppm to 100 ppt , temperature : 0 degree celsius to 1000 degree celsius (auto / manual), readout : 7 digits led (3 digits for temp. and 4 digits for cond./tds), printer interface for 80 column d.m. printer with minimum one year warranty
Tender For material supply for all types of material for gp hinganabara in year 2026 - 27 - sand (kanhan), soft murun, metal 80 mm, metal 40 mm, metal 20 mm, metal 10 mm, rcc pipe 800 mm with colar (acc), rcc pipe 600 mm with colar (acc), rcc pipe 450 mm with colar (acc), rcc pipe 400 mm with colar (acc), rcc pipe 300 mm with colar (acc), rcc pipe 200 mm with colar (acc), cement 53 grade isi mark (acc), cement 53 grade isi mark (ambuja), cement 53 grade isi mark ( ultra tech ), still 6 mm, still 8 mm, still 10 mm, still 12 mm, vibretar, centring tar, water trankar tractor troali, jcb, mixchar machine, centring plate, damp proof paint, information board still with painting, oil bound distemper, plastic emulsion paint, water proof cement paint, lead / zink base oil paint, single lef door 16 mm thik, door kittas, door fremas, primer, washabe oil bound distemper, chequered tiles, solid panel pvc internal door shutter, bricks, aluminium fixed windows (two track sliding ), putty, pvc nahani, gally trap 15*10 mm, swr pipe 110 mm, steel window, screw down bib 15mm, bricks, peving block 60 mm, cota stone, urinal 10 ltr, water close pan complit, air valve 25 mm, butter fly valve 65 mm, sluice valve 65 mm, strainless steel sluice valve 65 mm, pvc pipe 90 mm with bends/clams, pvc pile 65 mm with bend/clams, pvc pipe 110 mm with bends/clams, solution, caramic tiles, vetrifide tiles, water storage tank, iron pipe 15 mm, iron pipe 25 mm, wire 1.5 mm, wire 2 mm, wire 4 mm, service wire 4 mm, switch bord (moduler plate) 6*8 inch, switch bord (moduler plate) 3*6 inch, fan box, metal box 6*8 inch, metal box 3*6 inch, pvc pipe 1 inch, bends 1 inch, jangshan box, mcb switch 32 amp, led lamp 18 w, siling fan
Tender For supply material for samanya fund of gp bhilgaon for year 2026-27 2nd call - materiyal list, metal 80 mm, metal 40 mm, metal 20 mm, metal 12 mm, barbed wire / fenshing wire, sand, murum, cement, rolar, water tankar, khadanga, sand black, sittl 6mm, still 8 mm, still 10 mm, still 12 mm, still 16 mm, still 20 mm, centring tar, bricks table, mixer machine, pocland, iron door with frame & palla, cement door palla, cement door frame, iron sheet of 0.50 mm thick and 930 profile roof, islb angle, iron angle, iron window grill & palla, plastic water tank (500 lit.), plastic water tank (1000 lit.), plastic water tank (2000 lit.), distemper, jcb, plastic water tank (15000 lit.), alluminium sliding window, cement pipe 150 mm, cement pipe 300 mm, cement pipe 600 mm, cement pipe 900 mm, cement pipe 450 mm, kota stone, vibrating machine, ms grill, snowsem, cement paint, oil paint, tarpipne, gi sighn board with painting, wc pan, paiwar block, compound cement poll, polythene sheet, rubble, rcc chair, tiles vetrified, tiles ceramic, tiles polished chequered, tiles simpl chequered, 4 inch pvc vaint/waist pipe, putty material, chainlink fencing, water profing component, magic pit cement tank, hyash bricks, wall putty, intair wall paint, intair wall primer, intair wall plastic paint, exterior wall paint, brush 4 inch
Tender For supply material for vividh yojna works of gp bhilgaon for year 2026-27 2nd call - materiyal list, metal 80 mm, metal 40 mm, metal 20 mm, metal 12 mm, barbed wire / fenshing wire, sand, murum, cement, rolar, water tankar, khadanga, sand black, sittl 6mm, still 8 mm, still 10 mm, still 12 mm, still 16 mm, still 20 mm, centring tar, bricks table, mixer machine, pocland, iron door with frame & palla, cement door palla, cement door frame, iron sheet of 0.50 mm thick and 930 profile roof, islb angle, iron angle, iron window grill & palla, plastic water tank (500 lit.), plastic water tank (1000 lit.), plastic water tank (2000 lit.), distemper, jcb, plastic water tank (15000 lit.), alluminium sliding window, cement pipe 150 mm, cement pipe 300 mm, cement pipe 600 mm, cement pipe 900 mm, cement pipe 450 mm, kota stone, vibrating machine, ms grill, snowsem, cement paint, oil paint, tarpipne, gi sighn board with painting, wc pan, paiwar block, compound cement poll, polythene sheet, rubble, rcc chair, tiles vetrified, tiles ceramic, tiles polished chequered, tiles simpl chequered, 4 inch pvc vaint/waist pipe, putty material, chainlink fencing, water profing component, magic pit cement tank, hyash bricks, wall putty, intair wall paint, intair wall primer, intair wall plastic paint, exterior wall paint, brush 4 inch
Tender For supply of led light fitting for corridor (18w), 1090 mm, as per drawing: icf/std-7-6-063, alt 'a' rdso/pe/spec/tl/0091-2026 (rev.2) with drg. sked 1006, packing instruction: light fittings:- each fitting to be wrapped with biodegradable plastic bubble sheet and packed in a card board boxes( single ply corrugated). finally upto 24 lights to be packed in a card board box ( double ply corrugated ) and tied with 3 packing strips horizontally and 3 vertically. detachable diffuser if applicable with light fitting as per drg/spec shall be supplied in separate packing with each diffuser wrapped with biodegradable plastic bubblesheet and packed in a card board boxes( double ply corrugated)and tied with 3 packingstrips horizontally and 3 vertically. quantity of diffusers in a box shall be matching with the no. of corrosponding light fitting in each box. the material used for product packaging shall be eco-friendly. a list should be pasted on each box showing order no ,pl no, description of the item, drg.no/spec.no, qty,firm's name & address and date of despatch etc. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For plastic packing rope thickness 1mm, width 02 to 03 mm in 500/600 gram bundles, (sample of material to be approved by sse/s/pnvl-store before bulk supply) [ warranty period: 30 months after the date of delivery ] ]
Tender For supply of modular accessories as per given below list , 6 a socket x 4 nos , 6/16 a socket x 4 nos , 6 a switch x 11 nos , 16 a switch x 4 nos , 2m fan regulator x 3 nos , front plate with base frame and surface plastic box - 3m plate with box x 1 nos , front plate with base frame and surface plastic box - 4m plate with box x 1 nos , front plate with base frame and surface plastic box - 6m plate with box x 1 nos , front plate with base frame and surface plastic box - 8m plate with box x 1 nos , front plate with base frame and surface plastic box - 12m plate with box x 1 nos , colour white, material polycarbonate, finish type glossy, as per same existing installed model make - anchor penta, make - anchor penta , anchor/roma, legrand , crabtree, leader, anchor rider, only. (1) authorized dealer certificate/oem proof of purchase to be submitted along with the material supplied. (2) delivery require at: -sr. section engineer /electrical(power)-adi power store office, rms building 2nd floor, platform no.1, ahmedabad railway station kalupr, ahmedabad-380001. (7043013121, 9724093385) [ warranty period: 30 months after the date of delivery ] ]
Tender For supply and delivery of electrical maintenance material at ghatal super speciality hospital, district- paschim medinipur. - supply and delivery of recess mounted downlighter with pressure die-cast aluminum heat sink & pc diffuser in white powder coated finish with integral electronic low thd (<10%) led driver 18w recess mounted led down lighter input voltage: 240 v power rating: 18w (make- havells(integraneodlr18wled857s)/ similer to philips/crompton greaves cotton as appoved by eic), supply and delivery of 22watt 4 ft. single t8 led tube light fittings , pmu ps ct no. tmc 502 1xt-led22w with 1 no. master led tube lamp, # make- philips / or equivalent of bajaj/ wipro / cromption [as approved by eic] phillips cat-mas led tube /200mm/8w 865 t85-2100 km) supply and delivery of 18/12 w mas led tube (phillips cat no mas led tube similar wipro / similar crompton/bajaj [as approved by eic], supply and delivery of 230v 6w led circuler down light, ceiling cutout : ø 76mm, make: havells cat no.- vibetrend lrb6w led 865s. equivalent of phillips/ wipro/ crompton as approved by eic, supply and delivery of full glow g6 2'x2' led recessed mounted light, make phillips, model :rc380 led36s-6500 g6 l60w60 psu od s1, make - ip20 with in built phhillips driver or equivalent of bajaj/wipro/crompton as approved by eic., supply and delivery 1200 mm ceiling fan, (make: crompton model: hs plus, colour: opal white make:crompton or similar crompton/ havells / usha as approved by eic, supply and delivery 900 mm ceiling fan, (make: crompton model: riviera, colour: opal white. similar usha/similar orient as approved by eic supply and delivery of new 6/16 a, 2 module, 6 pin, modular socket with shutter, colour -white make: anchor(roma)/ similar legrand/ similar crabtree (as approved by eic)wbpwd sor k-3, item no-104, supply and delivery of new 6 a, 2 module, 3 pin, modular socket with shutter, colour -white make: anchor(roma)/ similar legrand/ similar crabtree (as approved by eic) wbpwd sor k-3, item no-103, supply of new 16a, sp-1 way, 1module, modular switch, colour white make: anchor(roma)/ similar legrand/ similar crabtree (as approved by eic) wbpwd sor k-3,item no- 102, supply of new 6a,sp-1 way, 1module, modular switch, colour - white make: anchor(roma)/ similar legrand/ similar crabtree (as approved by eic) wbpwd sor k-3, item no-101, supply and delivery of fan regulator, 100 watts- humfree - 0 - 4, step,1 module, colour -white make: anchor(roma)/ similar legrand/ similar havells (as approved by eic), supply and delivery of new modular cover plate, 3 module, with support frame, colour-white make: anchor(tresa)/ similar legrand/ similar havells (as approved by eic) wbpwd sor k-2, 94, supply and delivery of new modular cover plate, 6 module, with support frame, colour-white suitable for matching with the existing one make: anchor(tresa)/ similar legrand/ similar crabtree (as approved by eic)) wbpwd sor k-2, 96, supply and delivery of new modular cover plate, 12 module, with support frame, colour-white suitable for matching with the existing one make: anchor(tresa)/ similar legrand/ similar crabtree (as approved by eic) wbpwd sor k-2, 97, supply and delivery of new plastic surface box, 3 module, colour-white make: anchor/ similar legrand/ similar crabtree (as approved by eic), supply and delivery of new plastic surface box, 6 module, colour-white make: anchor/ similar legrand/ similar crabtree (as approved by eic), supply and delivery of new plastic surface box, 12 module, colour-whitemake: anchor/ similar legrand/ similar crabtree as approved by eic), supply and delivery of 1.1 kv grd. 1.5 sq.mm single core 'frlsh' pvc insulated copper conductor (unsheathed) wire conforming to is 694. (r-180mtrs y-90mtrs b-90mtrs black- 180mtrs) make: polycab/kei/ finolex/ havells (as approved by eic) wbpwd sor k-2, 70, supply and delivery of 1.1 kv grd. 2.5 sq.mm single core 'frlsh' pvc insulated copper conductor (unsheathed) wire conforming to is 694.( r-90mtrs y-