Latest revolving center Tenders | Government revolving center Tenders

State Government

CTN :45706667

10 Jul, 2026 7.06 Lacs

Bhavnagar - Gujarat

Tender For installation of various instruments at lakhanka and hamirpara irrigation scheme - providing, supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anticorrosion finish. complete in all respects as directed by the engineer-in-charge. (1) 90° v-notch-20 x 40 secticin 15 lit/sec , providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in- charge. , providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc. c) concrete grade 1:2:4 and msa-40mm(graded)

CTN :45673253

09 Jul, 2026 44.7 Thousand

Shahjahanpur - Uttar Pradesh

Tender For supply of hss cobalt tools 10 cobalt tripple swastik s 500 mirinda make all size , tst drill it make all size , flat file all size jk make , steel measuring tape 3 mtr standard quality , dead centre 01 , dead centre 1 2 , dead centre 2 3 , dead centre 3 4 , revolving center size mt3 , revolving center size mt4 , h s s square rod 1 inch , h s s square rod 3 4 inch , tap set tottom make all size on ppl , jhalani make hand tool all size ring spinner dspinner screw driver insulated plier screw wrinch pipe wrinch etc , g p grinding wheel size 1 1 or 2 inch x 12 inch rough , measuring tape 5 mtr standard quality , gp grinding wheel size 1 or 1 2 inch x 12 inch fine , pvc flexible pipe 4 inch bore for suction

CTN :45686658

02 Jul, 2026 3.47 Lacs

Mananthodi - Kerala

Tender For annual maintenance of gas crematorium equipment at mananthavadi municipality wayanad district proposed under 2025-26 annual plan. project no-1068 - civil work, od319315/2025-2026supply, replacement and servicing of automatic burner and fitting gas line., od319328/2025-2026cleaning of chimney surface, machinery repairing, removal of soot and rust, and applying primer with two coats of epoxy paint., od319385/2025-2026repairing damaged brickwork by removing broken bricks and replacing them with new bricks using cement mortar. the work also covers proper alignment,joint finishing, curing, and cleaning of the repaired area, complete as per direction of engineer-in-charge, od319413/2025-2026servicing and maintenance of the motor electrical system, such as inspection of wiring, terminals, switches and connections. it also covers tightening of loose connections, minor repairs, testiong for proper operation, and ensuring safe and smooth functioning of the motor., od319470/2025-2026reparing damaged or worn-out bed with 18 mm ss rod structures by alignment correction, replacement of defective parts if required, welding or fastening works, and ensuring proper strength and stability., od319499/2025-2026repairing of the gas valve system, such as cleaning , replacement of worn-out seals orcomponents if required, leak testing, and ensuring smooth and safe operation. the work shall be carried out as per safety norms., od319520/2025-2026removal of rust, scale, and old loose paint from equipment surface by wire brushing /scrapng, surface cleaning, application of suitable anti-corrosive primer, and finishing with two coats of approved paint. the work includes all materials, labour, tools and incidental charges required to complete., od319580/2025-2026comprehensive maintenance of the installed equipment for a period of one year, covering routine inspections,servicing, minor repairs,adjustments and ensuring continuous and safe operation. including survice of burner, blower, impeller and chimney. the rate includes labour, tools and incidental charges during the maintenanace period, excluding major replacements unless specified.

State Government

CTN :45669079

08 Jul, 2026 7.24 Lacs

Amreli - Gujarat

Tender For installation of various instruments and monitoring system at vadi irrigation scheme - supplying, installing, testing, and commissioning of a v-notch weir mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge.with different sizes mentioned below: (1) 90° vnotch- 20 x 40 secticin 15 lit/sec, providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge., providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc (c) concrete grade 1:2:4 and msa-40mm(graded))

State Government

CTN :45669080

08 Jul, 2026 5.38 Lacs

Amreli - Gujarat

Tender For installation of various instruments and monitoring system at thebi irrigation scheme - supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge.with different sizes mentioned below: (1) 90° vnotch- 20 x 40 secticin 15 lit/sec, providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge., providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc (c) concrete grade 1:2:4 and msa-40mm(graded))

State Government

CTN :45675246

07 Jul, 2026 5.87 Lacs

Amreli - Gujarat

Tender For installation of various instruments at raidy & dhataravdi-1 irrigation scheme - item no.1:- providing, supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss- 304/ss-316 plate with thickness of 3-5 mm, and be suitable for measurement ranges of approximately 0-50 l/s depending on notch angle. the weir shall have ±1% fullscale reading accuracy, operate under 5-100% humidity, temperature -20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge. (1) 90° v-notch-20 x 40 secticin 15 lit/sec , item no.2:- providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge. , item no.3:- providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks, centering, scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc. (c ) concrete grade 1:2:4 and msa-40 mm(graded)

Central Government/Public Sector

CTN :45178202

30 Jun, 2026 NA

Koraput - Odisha

Tender For corrigendum : tender for supply of tools from hal provided technology -transport frame , engine mounting stand , support tool , det 2 of tm2820g101 , balancing tool , blank , balancing inspection tool , measuring tool , measuring tool , dimension measuring tool , measuring tool , measuring tool g25-1 , measuring tool , dimension measuring tool , dimension measuring tool , measuring tool , measuring tool t33-1 , equipped metal container , set of blanks , lifting tool , assembly support , spanner , obus de guidage , spanner & immobilizer , orientation tool , setting / removal tool , flipping tool , assembly / dis-assembly tool , removal tool , removal tool , extractor , extractor turbine hp , dis - assembly tool , tool for removal of front drive gen , marking support , marking support , marking support , protector , protector , o-ring installation tool , outer duct bearing removal tool , generator transport buildup , installation & removal tool , air entry blank , sealing & connecting tool , blank , air entry blank , harness sheath , orientation tool , handling tool , blank for exhaust pipe , de-blading set , removal tool , o ring installation tool , shell for seal assy , shell for seal assy , axial loose centring , radial loose centring , axial loose centring , radial loose centring , radial loose centring , axial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , radial loose centring , sealing check fixture , flow check tool , blank , relation tool , ring removal tool , wrench and immobilizer , wrench and immobilizer , measuring tool , extractor , extractor , extractor , name plate , fitting / removal tool , puller , extractor , blank , handling tool , extractor thp , bonding tool , centre blank , centre blank , handling tool , extractor , install/removal tool , dis-assy tool , measuring tool , static portion support

Central Government/Public Sector

CTN :45643460

01 Jul, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of high speed revolving center mt-6 for axle turning lathe machine, morse taper-mt-6, point dia-50 mm with 02 nos 60-degree and 02 nos 90-degree angle, max job weight capacity-3500 kgs, max rpm-2600 suitable for goratu make cnc axle turninglathe machine. make: turnmax/equivalent. [ warranty period: 18 months after the date of delivery ] ]

State Government

CTN :45585472

22 Jun, 2026 2.00 Lacs

Multi City - Telangana

Tender For 4th call - procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub division no.4, pdpl, id4 manthani of ic-pdpl, peddapally district - supply of torch light (make: philips) multi functional long range with rechargable with 1 year warranty and 1 year extended warranty as directed by the engineer-in-charge. , supply of tool kit spanner set ring spanner 6-32 (make: taparia) as directed by the engineer-in-charge. , supply of sluice operating handle ( 1 small & 1 big for medium gear boxes for dps & ots) as directed by the engineer-in-charge. , supply of sickles/ kodavali (make:tata) as directed by the engineer-in-charge. , supply of shovel (make: tata) 10 number 1.8 kg as directed by the engineer-in-charge. , supply of safety helmet isi(make:karam) as directed by the engineer-in-charge. , supply of rain coats (make:zeel) as directed by the engineer-in-charge. , supply of platic big gamela (make:srp gold/pooja) as directed by the engineer-in-charge. , supply of nylon rope 16 mm yellow (30 metre) (make:cheeta) 24 kgs weight as directed by the engineer-in-charge. , supply of measuring tape 30m isi(make: freemans) as directed by the engineer-in-charge. , supply of hand gloves electric shock proof as directed by the engineer-in-charge.( for 11 kv including 13.615% contractor profit). , supply of hammers( make:tata) 2 lb weight as directed by the engineer-in-charge. , supply of gum boot safety steel toe double colour(make: big elephant) as directed by the engineer-in-charge. , supply of grease gun 5 kgs (make:capson) as directed by the engineer-in-charge. , supply of crow bar (make;tata) 25 mm as directed by the engineer-in-charge. , supply of cotton waste per kg as directed by the engineer-in-charge.( each lascar - 10 kgs) , supply of chain saw 22" petrol (make: forte ) (with 6 months warranty for bore & piston) as directed by the engineer-in-charge. , supply of axe with wooden handle (make: tata) 1400 grams weight (min supply of 1 box i.e. 12 pieces, no loose) as directed by the engineer-in-charge. , supply of 2hp 4 stroke grass cutter/brush cutter umk 450 t (make: honda) (with 1 year warranty for bore & piston) as directed by the engineer-in-charge

Central Government/Public Sector

CTN :45546266

30 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of revolving center mt-5 extra heavy duty four bearing design suitable for heavy duty application for conventional lathe machines. make: turnmax/ rr/ groz/ ultra [ warranty period: 30 months after the date of delivery ] ]

Revolving Center Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors