Latest rice planter Tenders | Government rice planter Tenders

CTN :44845660

29 Jun, 2026 NA

South Andaman - Andaman And Nicobar Islands

Tender For bid to ras providing of customized amc/cmc for pre-owned products - ground support equipment along with nabl calibration of equipment; as per buyer scope of work; annual maintenance contract (amc); as per buyer scope of work; no

State Government

CTN :45492201

02 Jul, 2026 38.78 Lacs

Gautam Budnagar - Uttar Pradesh

Tender For corrigendum : providing and fixing open gym equipment for play ground and maintenance of shamshan sthal boundary wall and kutte home work in village - ahmadpur choroli , yea wc-06

State Government

CTN :45676047

02 Jul, 2026 36.58 Lacs

Bengaluru - Karnataka

Tender For annual maintenance & supply of materials, repairs to windows and doors, supply of water & sanitary fittings to krishna block, national games village, koramangala, bengaluru from august-2026 to july-2027 (reserved for sc)- item description: external sweeping and terrace cleaning - cleaning of outer periphery like roads footpaths curb stones terrace including removing grass dust etc., to the nearest garbage pit using suitable coconut broomstic,bombay broomstick, squezers /wipers /rubberbru , item description: cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of engineer-in-charge. (the old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ rs. 0.10 per litre) (if during cleaning any gi fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) , item description: cleaning of under ground sump, over head r.c.c. tank ( independent staging) including disposal of slit and rubbish, all as per direction of engineer-in-charge. the cleaning shall consist following operations:- tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. chlorination of rcc internal surface by liquid chlorine. the treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. finally the surface shall be treated with ultraviolet radiation etc. as per direction of engineer-in-charge. , item description: cleaning of sewer line by rodding equipment for dia above 150 mm.(while cleaning septic tank all safety and precautionary measures to be taken,standard operating procedure to be adopted and pemsr act 2013 to be strictly followed). , item description: providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. , item description: providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. , item description: providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete , item description: providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. , item description: providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.75x40x2.5 mm (ordinary type) , item description: providing and fixing isi marked oxidised m.s. handles conforming to is:4992 with necessary screws etc. complete : 75mm , item description: providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. - 50mm , item description: providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc complete as per directions of engineer- in-charge , item description: providing and fixing brass stop cock of approved quality : 15 mm nominal bore , item description: providing and fixing brass full way valve gate with c.i. wheel of approved quality (screwed end) : 25 mm nominal bore , item description: providing and fixing brass full

CTN :45628704

29 Jun, 2026 2.34 Crore

Chennai - Tamil Nadu

Tender For construction of research visitors guest house (g plus 8 floors) by replacing the existing maintenance office building and student facility for iitm, chennai. sh providing shed with pre fabricated steel structure over the electrical equipment at terrace, structural glazing from ground floor to 8th floorsubwork/packages:providing shed with pre fabricated steel structure over the electrical equipment at terrace, structural glazing from ground floor to 8th floor

State Government

CTN :45625466

02 Jul, 2026 16.05 Lacs

Gautam Budnagar - Uttar Pradesh

Tender For providing and fixing of open gym equipment and g.i chain link fencing open gym in village chanchali yea wc-6 - sit up station: providing, designing and fixing of double sit-up station of size 1500 x 1150 x 650mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe of 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80 - 120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. seat and base plate cover to be made up from virgin lldpe manufactured by rotational molding with minimum thickness of plastic as 8mm, colorful and uv resistant and environmental friendly. the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolts and once the concrete is set, fix the equipments on to it and cover nuts and bolts with the base plate. all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal) and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately). (ar/yeida/uppwd/sor-2020), leg press: providing, designing and fixing of leg press of size 2000 x 550 x 1600 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80 - 120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. handle bars to be provided with high quality grip rubber on top end. pedals shall be made up of nylon alloy with rounded edges to prevent any impact of injury. seat and base plate cover to be made up from virgin lldpe manufactured by rotational molding with minimum thickness of plastic as 8mm, colorful and uv resistant and environmental friendly. bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by engineer in charge. equipment to be fitted with inbuilt limiters to prevent unwanted movements. all open ends of pipe to be closed by gi/ lldpe caps for user safety. the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc (the cement concrete and excavation work shall be paid separately). (ar/yeida/uppwd/sor-2020), seated chest press: providing, designing and fixing of seated chest press in a pair of size 1800 x 700 x 2000 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80 - 120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. handle bars are to be provided with high quality grip rubber. pedals shall be made up of nylon alloy with rounded edges to prevent any impact or injury. seats and base plate cover to be made up from virgin lldpe manufactured by rotational mounding with minimum thickness of plastic as 8mm, colorful and uv resistant and environmental friendly. bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by engineer in charge. equipme

State Government

CTN :45585176

29 Jun, 2026 8.18 Lacs

Gautam Budnagar - Uttar Pradesh

Tender For providing and fixing of open gym equipment in village tilpata karanwas, greater noida. - sit up station: providing, designing and fixing of double sit-up station of size 1500x1150x650mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe of 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80-120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. seat and base plate cover to be made up from virgin lldpe manufactured by rotational moulding with minimum, thickness of plastic of 8mm, colorful and uv resistant and environmental friendly., the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolts and once the concrete is set, fix the equipments on to it and cover nuts and bolts with the base plate. all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal) and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately)., air walker: providing, designing and fixing of air-walker of size 1100 x 550 x 1480mm fabricated with main post of 114mm dia and 2.5mm thick and other pipes of 10mm dia 2.5 mm thick made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using akzo nobel or equivalent in desired shade and colour. all welding joints of pipe shall be robotic weded with joints paint to be applied al all the welding points prior of finising. all open ends of pipe to be closed with gl/lldpe caps. base plate cover shall be made virgin lldpe plastic by roatational molding with minimum 8mm thickness. uv resistant and colour as approved by engineer in charge. ligh quality grip rubber should be used on handles., foothold shall be made of nylon prevent alloy with rounded edges to impact and injury. maintenance free bearings should be used in the equipments manufactured by reputed company duiy oil sealed and self lubricated to be approved by engineer-in charge. the equipment shall be fitted with in-built limiters. the equipent shall be fixed on ground with concrete of minimum strength m-25 and js haped welded bolts and when concrete is sec. fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per directions and approval of engineer-in charge regarding material, shape of equipment. colour (of metal. seat and pedal). and fixing of equipemnt etc (the cement concrete and excavation work shall be paidseparately)., seated chest press: providing, designing and fixing of seated chest press in a pair of size 1800 x 700 x 2000mm abricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80-120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off |removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. handle bars are to be provided with high quality grip rubber. pedals shall be made up of nylon alloy with rounded edges to prevent any impact of injury. seats and base plate cover to be made up from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic of 8mm, colourful and uv resistant and environmental friendly., bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by engineer in-charge. equipment to be fitted with inbuilt limiters to prevent unwanted movements. all open ends of pipe to be closed by gi/illdpe caps for user safety. the equipment to be fixed on ground with concrete of minimum

CTN :45388756

20 Jun, 2026 NA

Delhi - Delhi

Tender For corrigendum : supply of providing and fixing surf board size 1150x900x1250mm fabricated with main post of 114mm dia and 4 mm thick made up hot rolled tubular steel and hot dipped galvanized and powder coated 80- 100micron thick using akzo nobel /rapid or equivalent in desired shade and colour. all welding jonits of pipe shall be robotic welded with joints scallopped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all the welding points prior to finishing. all open ends of pipe to be closed with lldpe plastic caps, base plate cover shall be made of virgin lldpe plastic by rotational moulding with minimum 4mm thickness, uv resistant and colour as approved by engineer in charge. hight quality grip rubber should be used on handles. foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. maintenance free bearing should be used in the equipment’s manufactured by reputed company duly oil sealed and self lubricated to be approved by engineer-in- charge. the equipment shall be fitted within built limiters. the equipment shall be fixed on ground with concrete of minimum strength m-25 and j shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per directions and approval of engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), providing and fixing rowing machine of size 1280x800x1150mm fabricated with main post of 114mm dia and 4 mm thick made up hot rolled tubular steel and hot dipped galvanized and powder coated 80- 100micron thick using akzo nobel /rapid or equivalent in desired shade and colour. all welding jonits of pipe shall be robotic welded with joints scallopped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all the welding points proir to finishing . all open ends of pipe to be closed with lldpe plastic caps, base plate cover shall be made of vrigin lldpe plastic by rotational moulding with minimum 4mm thickness,uv resistant and colour as approved by engineer in charge. hight quality grip rubber should be used on handles. foothold shall be maede of nylon alloy with rounded edges to prevent impact and injury. maintainance free bearing should be used in the equipments manufactured by reputed company duly oil sealed and self lubricated to be approved by engineer-in-charge. the equipment shall be fitted with in built limiters. the equipment shall be fixed on ground with concrete of minimum strenght m-25 and j shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per directions and approval of engineer-in-charge regarding material,shape of equipment, colour (of metal, seat and pedal), providing and fixing sky walker of size 850x800x1800mm fabricated with main post of 114mm dia and 4 mm thick made up hot rolled tubular steel and hot dipped galvanized and powder coated 80- 100micron thick using akzo nobel /rapid or equivalent in desired shade and colour. all welding jonits of pipe shall be robotic welded with joints scallopped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all the welding points proir to finishing . all open ends of pipe to be closed with lldpe plastic caps, base plate cover shall be made of vrigin lldpe plastic by rotational moulding with minimum 4mm thickness,uv resistant and colour as approved by engineer in charge. hight quality grip rubber should be used on handles. foothold shall be maede of nylon alloy with rounded edges to prevent impact and injury. maintainance free bearing should be used in the equipments manufactured by reputed company duly oil sealed and self lubricated to be approved by engineer-in-charge. the equipment shall be fitted with in built limiters. the equipment shall be fixed on ground with concrete of minimum

CTN :45072222

18 Jun, 2026 NA

Goa - Goa

Tender For bid to ras repair, maintenance, and installation of plant systems equipments- frame work: ms / rcc, sheet, repair of control console to arrest ingress of water/ humidity by use of qty 20 rcc blocks of dimension 04 feet x 02 feet x 06 inches (height). 2.2 repair of roof of control console to protect against sun light towards ensuring controlled temperature which is required for electronic equipment held in it. the protective structure would consist of vertical square tubes of dimension 40 x 40 mm and length 128 feet clamped onto the side wall body of the container. a horizontal framework 25 x 25 mm of similar raw material (square tube of dimensions 40 x 40 mm, 178 feet length) shall be fixed onto these vertical rods. 2.3 repair of fuel tank. 2.4 repair of qty 02 mtb side platforms used for inspection and adjustment during ground run/ testing of engine. 2.5 provisioning of consumables for maintenance of dg set of the console.

CTN :45348237

12 Jun, 2026 NA

Delhi - Delhi

Tender For corrigendum : providing of customized annual maintenance contract/cmc for pre-owned products - comprehensive annual maintenance contract of airport ground service equipment gse at iaf, palam, new delhi from oem/ oem authorized distributors for : (1) camc for toyota make tugs (model 02-td25) - qty 3 nos; toyota; comprehensi..

CTN :45419916

24 Jun, 2026 NA

Burdwan - West Bengal

Tender For supply of ground equipment d d - dolly propeller , prier, portable propeller , fuel preservation system , 8cyl n2 trolley , aft cargodoor adapter , jacking system portable 35 ton , jack hydraulic tripod 10 tons , tow bar aircraft , purging unit, air , cradle ground handling , heater duct type portable , lavatory service cart , dec dolly for ground equipment , gtc dolly assembly , crash trolly , filter and bleeder hydraulic system , maintenance ladder type-2 , maintenance ladder type-3 , total aircraft wash system , articulating staircase mx stand type-ii , suselage support creadle , wing shoring

Rice Planter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government