Get complete information related to latest Rigid Roller Bearing Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Rigid Roller Bearing Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Rigid Roller Bearing Tenders.
Tender For supply of 52kg pit line bearing plate and fitting per set as under 1. c.i. bearing plate 52kg as per rdso no. mrc/w/pw/1/2004 = 01 no. 2. 6mm thick grooved pad as per rdso no. mrc/w/pw/12-93 = 01 no. 3. 12mmthick g rubber pad 52kg as per rdso no. mrc/w/pw/10-93/52 = 01 no. 4. polyethylene insert as pe r rdso no. mrc/w/pw/14-93 = 04 nos. 5. ms spiral as per rdso no. mrc/w/pw/14-93 = 04 nos. 6. 28mm dia. anchor stud with nut (hot dip galvanized) as per rdso no. mrc/w/pw/14-93 = 04 nos. 7. punched w asher as per rdso no.mrc/w/pw/17-93 = 04 nos. 8. triple coil spring washer as per rdso no. mrc/w/pw /15-93 = 04 nos. 9. nylon ferrule as per rdso no. mrc/w/pw/16-93 = 04 nos. [ warranty period: 30 mo nths after the date of delivery ]
Tender For supplying materials to solid waste management unit at kolur village of koppal district - broken stone aggregate 40mm size., broken stone aggregate 20,mm size., broken stone aggreate 12, mm to 10,mm size, coarse sand (zone -lll), portland, cement., mixer (concrete) - 1,cum capacity., add watering charges, at 1 % on material., silver oak or equivalent, planks, jungle wood,runners and planks, casurina poles, 75 - 100 mm dia, add handling , loading and unloading at 2 % on material, casurina poles 100 - 150,mm, plasticizer, / super plasticizer., hom of vibrator 0.71, days., size stone, 20 x 20 x 25 cms., bond stone 20 x 20 x 45, cm, boulders,.,, mixer ( concrete small, used in culvert), mason class l (with tools), mason class ll (with tools), stone, chistler class ll, add watering, charges at 1 % on labor, tmt bars fe, 500, binding, wire, burnt bricks class 35, (non modular), add handling , loading and unloading at 1 % on material, t section,, mullion section,, ms clamps,, handles,, hinges 5 heavy duty,, stays,, tw beading for fixing glass,, reeded glass 2 mm thick,, z section,, fitter class l, welder grade, l, add,., ready mix primer paint (ready miix red lead paint), add wire brush, fine steel wool, putty , sand paper , at 3 % on cost of paint, painter class l, add providing and removing scaffolding at 3 % on labour, mathi/ nandi wood planks for panels 25 mm thick, add cutting and other wastage 5 %, hom, of machinaries for planing, mathi/nandi wood, scantling, broken granite, metal 12.5 mm., broken granite, metal 10 mm., weld, mesh 75 x 25 mm of 6g to 10g., ms angle iron 50mm x 50mm x 6mm, 33.8 metre in length, at 4.5 kg per metre., ms angle iron 40mm x 40mm x 6mm, 23 metre in length, at 3.5 kg per metre., gusset plates, 6 mm thick., base plate / base plate.,, anchor, bolts 750mm.,, corbon, electrodes, hom of welding, and grinding machine.,, hom of cutting and grinding machine., enamel metal, paint, add brush at 1 % on cost of paint, tools and plants and electrical charges at 2%, unit cost as per the, specification., enamel paint.,, add brush , putty , sand paper , roller at 5 % on cost of paint, dia 50mm ms hollow pipe b class 14 gauge,., ms square rod,. 16 x 16 mm, ms plates,. 36 mm x 6mm, ms plates,. 40 x 6 mm, cast iron spike,., ball bearing hinges heavy duty.,, anticorrosive,. bituminous paint (black), mechanic class ll / mechanic hmp grade l/eme grade, hom of cutting,. and grinding machine - 1, tools and plants at 2 % on material, transportation loading,. and unloading at 1% on material, rcc cap 1000 mm dia , 100 mm thick, transportation charges of materials beyond 5 km at 10 %, cost of 6.5 mm m, s. coil, fabrication, charges, pvc pipe of 10kg cum,140 mm,., indian type water closet, of size 580 mm of specified make with footrests, trap, 100 mm, s or p, add white lead paint , gasket , cement , sand for making good the wall and floor at 2 % on material, tractor - 40 hp,., electrification,., display board,.
Tender For motor reawinding items for kunebelakere gram panchayath harihara taluk davangere district - motr lifting charge /kunegp1, bladeset/kunegp1, statercoil/kunegp1, connector /kunegp1, volt meater/kunegp1, amps meater /kunegp1, capactershunderd ten to two hunderd ten/kunegp1, running thitry six m f dtwenty five m fd/kunegp1, capacater sfifty m f d/kunegp1, pump share /kunegp1, allentment washer /kunegp1, do bush/kunegp1, ipbush /kunegp1, pump soft twelve mm/kunegp1, single phase bole and impllie/kunegp1, single phase bole and imolliercora /kunegp1, single phase bole and imolliercora five/kunegp1, single phase bole and imolliercora four/kunegp1, moter bush /kunegp1, tp plate/kunegp1, moter changuard/kunegp1, moter cuppling/kunegp1, moter mess/kunegp1, cable guard12/kunegp1, thurstbearing plate/kunegp1, body circlife/kunegp1, eightmm allen key screw/kunegp1, eight x seventy five mm stud/kunegp1, flange eight mm/kunegp1, housingk /kunegp1, oil scale twenty five twenty and fourty /kunegp1, eight mm stud /kunegp1, eight x twenty mm stud /kunegp1, connector/kunegp1, stater coil /kunegp1, stater bladuset/kunegp1, stater relay /kunegp1, three crore foursgm m cable one meter /kunegp1, threecrore two and five sq mm cable one meter/kunegp1, sixmm copper wire one miter/kunegp1, star detta stater ltlk /kunegp1, nutral link/kunegp1, voltmeater/kunegp1, amps meater/kunegp1, auto stater/kunegp1, singleprawenter /kunegp1, pennal bord two x twenty one x two/kunegp1, fuse sixty three amps/kunegp1, stater do ltlk/kunegp1, pump patti twelve stage thirty two/kunegp1, pump patti ten stagetwenty nine inch /kunegp1, pump patti eight stage twenty three inch/kunegp1, pumpallen key screw /kunegp1, pump mess ss/kunegp1, flatewasher one pc ms/kunegp1, ten mm nut ms/kunegp1, stage slive twnty five xfifty xfive/kunegp1, stage slivetwnty five xfifty xfive/kunegp1, stge bush g m/kunegp1, do bush gm/kunegp1, ipbush gm /kunegp1, pump shoft twenty mmx twenty nine inch /kunegp1, pump shaft twenty mm twenty six inch ss /kunegp1, pump shoft twenty mm x twenty three inch ss/kunegp1, pump chavi twelve mm/kunegp1, pocanacter1/kunegp1, ip canacter /kunegp1, pump bole/kunegp1, motor bush gun mettel l b/kunegp1, water nut brass/kunegp1, water nut p v c/kunegp1, motor chavi guard brass /kunegp1, motor cuppling /kunegp1, motor chavi /kunegp1, motor messss /kunegp1, cable guard/kunegp1, rotory surclife one eight mm/kunegp1, rotory surclife twenty mm/kunegp1, thrust bearing plate/kunegp1, six inch body surclife/kunegp1, eight x thirty five m m stud /kunegp1, stud ten x seventy five mm /kunegp1, flange eight mm /kunegp1, flange ten mm/kunegp1, housing /kunegp1, oil seal/kunegp1, ten m m nut ss/kunegp1, stud ten x twenty five m m /kunegp1 , conacter three phase motor/kunegp1, water two h p motor reawinding single phase/kunegp1, water three h p motor reawinding single phase/kunegp1, water three hp motor reawinding/kunegp1, water five hp motor reawinding /kunegp1, water six hp motor reawinding/kunegp1, waterseven and half hpmotor reawinding/kunegp1
Tender For centralized rate contract for two (02) years of spares of sam turbo make pumps installed in ash handling plant of dvc - impeller with screw & hub cap : part no : -18 & 38, 58 : material: - nihard type iv (550 bhn) / 24% chromium ci (550 bhn), fasteners set (total quantity of fasteners applicable for one bare ba overflow transfer pump, model : arl 200/410 ) : part no : -na : material: - ms / hts, lock washer (p.end) : part no : -63 : material: - is 1363 ms, piston ring : part no : -51 : material: - is 210 fg 200, key (coupling) : part no : -32 : material: - bs 970 en 8, laybrinth (drive end) : part no : -24 c : material: - astm a 216 gr wcb, coupling set [od 280 mm] : part no : -na : material: - is 210 fg 200, base with top cover : part no : -1 & 2 : material: - is 210 fg 200, volute casing : part no : -17 : material: - nihard type iv (550 bhn) / 24% chromium ci (550 bhn), lock nut (p.end) : part no : -60 : material: - is 2062 c 15, grease nipple : part no : -48 : material: - steel, lock washer : part no : -47 a : material: - is 1363 ms, check nut : part no : -47 : material: - astm a 216 gr.wcb, key (shaft sleeve / impeller) : part no : -31 : material: - aisi 304, bracket side cover : part no : -25 : material: - astm a 216 gr wcb, laybrinth (pump end) : part no : -24 : material: - astm a 743 cf8, shaft sleeve : part no : -12 : material: - aisi 410 (h), gland : part no : -10 : material: - astm a 216 gr.wcb, grease retainer : part no : -7 : material: - is 210 fg 200, wear plate (b.side) : part no : -16 : material: - nihard type iv (550 bhn) / 24% chromium ci (550 bhn), pump shaft with keys : part no : -4 : material: - bs 970 en 8, lantern ring : part no : -13 : material: - aisi 410, gland housing : part no : -9 : material: - alloy ci (290 - 320 bhn), end cover : part no : -5 : material: - is 210 fg 200, ba overflow transfer pump complete without motor, model-arl 200/410, earlier pump sl.no.-16804-16805, head:20mwc, capacity: 320 cubic meter/hr., size:200x200., o ring set (1 set=8nos.), for ba overflow transfer pp, model of pump-arl 200/410, shaft sleeve : part no : 53.6 : material : aisi 410, impeller with nut & helicoil insert : part no : 24.2 : material : is 318 gr.i, bearing housing lantern : part no : 35.6 : material : is 210 fg 200, bearing bed : part no : 36.7 : material : is 210 fg 200, bearing cap(outer) : part no : 37.2 : material : is 210 fg 200, bearing cap(inner) : part no : 37.3 : material : is 210 fg 200, oil seal set (1set = 2 nos) : part no : 43.13 & 43.3 : material : syn. rubber, impeller nut with helicoil insert : part no : 93.4 & 94.21 : material : aisi-316, wear ring (casing) : part no : 51.4 : material : is 318 gr.ii, wear ring (casing cover) : part no : 51.23 : material : is 318 gr.ii, key(coupling) : part no : 95.2 : material : bs 970 en8, circlip : part no : 94.23 : material : spring steel, grooved nut & lock washer : part no : 93.3 & 94.03 : material : sae 1018/1020 is 513 crca sheet, gland : part no : 46.4 : material : is 210 fg 260, pressure ring : part no : 46.9 : material : aisi 410, lantern ring : part no : 46.10 : material : aisi 410, gland packing set (1set = 4 nos) : part no : 47.3 : material : tiga, fastners set [total quantity of fastners applicable for one bare ash conditioner water pump, model : cpc 80/400 ] : part no : na : material : ss, key(impeller) : part no : 95.03 : material : aisi-316, key (sleeve) : part no : na : material : aisi-316, gasket set (1set = 4 nos) : part no : na : material : caf-9/ paper oil resist, volute casing : part no : 11.4 : material : is 210 fg 260, pump shaft with keys : part no : 22.3 : material : bs 970 en8, disc (impeller) : part no:550 : material :-ansi-316, gland : part no:452 : material :-astm a 743 gr.wcb, lantern ring : part no:458 : material :-aisi 410, key (impeller / shaft) : part no:940.01 : material :-aisi 316, lock washer : part no:931 : material :-sae 1018/1020, bearing cover (n.d.e) : part no:360.01 : material :-ast
Tender For maintenance of mi scheme under belbari rd block during the year 2025-26/sh_ - repair _ maintenance of pump-motor, suction-delivery _ electrical accessories etc. (job no. tr/34/minor works/wrd-i/2025-26) - dismentling of pump for over hauling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the engineer-in-charge.i) for li, supply & fitting fixing ball bearing of approved quality for pump required during overhauling.i) 6306 ball bearing (tata /skf), providing & fitting fixing shaft sleeve bush of approved quality.i) for li (cast iron), providing & fitting fixing shaft sleeve nut of approved quality.i) cast iron (ci), providing & fitting fixing c.i. gland of approved quality.i) for li, providing & fitting fixing c.i coupling complete with nuts & bolts of approved quality.i) 150 mm dia, providing & fitting fixing coupling nuts & bolts (all size)of approved quality.i) for li, providing & fitting fixing coupling rubber bush (all size)of approved quality. i) for li, providing & fitting fixing coupling star bush (all size) of approved quality.i) 150 mm dia, providing & fitting fixing pump shaft of approved quality., supplying and fitting fixing of asbestos rope of best quality as per direciton of engineer-in-charge. i) 6mm to 8mm thick, ii) 10 to 12 mm thick, providing & fitting fixing casing ring of approved quality.i) 150 mm dia (10 mm thick), supplying and fitting fixing of pump cooling pipe of best quality as per direciton of engineer-in-charge., providing & fitting fixing lantern ring for pump of approved quality., supplying and greasing/applying of grease of approved quality as per direction of engineer-in-charge., providing and fixing g.i. bend /elbow in the pipe line including testing of joints complete as per cpwd specification and direction of the engineer - in - charge. a) 150 mm dia, providing & fitting fixing shaft sleeve nut of approved quality. (cast iron), providing & fitting fixing of g.i. flange ( 10 mm wall thickness ) by welding with g.i. / ms pipe and placing position as per specification and the direction of the engineer-in- charge.i) 150 mm dia, providing & fitting fixing gland nut / stag nut 100 mm long for gland of approved quality.i) for li, providing and fitting fixing m.s. clamp for hose pipes with nuts & bolts complete as per relevant is specification anddirection of engineer-in-charge.i) 150mm dia, providing & fitting fixing rubber flange washer 6 mm thick at site of work of approved quality.i)150 mm dia, providing and fitting fixing ms foot valve as per relevant is specification and the direction of the engineer-in-charge.. i) 150 mm dia, providing & fitting fixing c.i tail piece of approved quality at site of work.i) 150 mm dia, providing & fitting fixing foot valve leather washer (6 mm thick) of heavy duty at site of work of approved quality.i) 150 mm dia, providing & fitting fixing c.i foot valve spare parts of 125/150 mm dia at site of work of approved quality.a) c.i foot valve weight, b) c.i foot valve ring, c) c.i foot valve net, dismantling of motor fpr vernishing heating etc cpmplete in/c reinstalltion and trail run for two spell complete as per direction of the engineer-in charge., supplying & fitting fixing of spare parts for 20/25 hp horizontal motor.a) motor fan, b) terminal plate, providing and fitting fixing of fully automatic star delta type motor starter ( 3 ph. 50 hz, 415v, 25hp /18.50 kw relay range within 17-25 ) in steel sheet enclosures with contractors and timer etc. complete suitable for motor pump havells/l & t/bch make direction of the engineer-in-charge.i) 25hp/18.5kw relay range within 13-21 +10%, providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for din fuses). triple pole with neutral link ( tpn ) , 415/500 volt complete as per direction of the engi
Tender For providing and installation of children play equipments in municipal park near h.no.ru-335, ru block pitampura, ward no.57 under keshavpuram zone - providing and installation of children play equipments in municipal park near h.no.ru-335, ru block pitampura, ward no.57 under keshavpuram zone, supply and fixing of double arch swing.leg support :80 mm nb pipe. seat- anti skid rubber belt. bearing : heavy duty ball bearing. area : 6.0 m x 1.5 m. height : 2.6 m. top bar :50 mm nb pipe. suspension: 6 mm rubber coated chain. in this one child can enjoy the swing at one time. the arch shaped side frame shall be made of 80mm nb b class gi pipe shall be made up of 50mm nb b class gi pipe. the frame shall be powder coated to give an aesthetic look. the swing shall be made up of 10mm thick anti skid rubber top the rubber belt seat/ u shape swing seat with 2 eye bolt tyb-s06. made of polyurethane of size 53 x 20.5 x 20 shall be suspended on 6mm rubber coated gi chair. the bail bearings shall be mounted inside a specially designed nylon clamp. powder coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of toddler swing.the area :- 2.8m x 1.0m . in this toddler swing the center support shall be made up of 80 mm nb b class g.i. pipe. the horizontal bars shall be made up of 50 mm nb b class g.i. pipe. all gi pipes shall be powder coated. between the two horizontal bars there shall be a heavy-duty metal clamp attached to it. the bucket seats of the toddler swing shall be made of rubber with anti skid. the ball bearings shall be mounted inside specially designed nylon balls. the rubber seat shall be affixed on 8 mm thick gi chain. the seats shall be made with full care so that the child does not fall from it while swinging. powder coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of spiral slide. ladder-frame- 25m m n b pipe. handrail - 20 mm n b pipe. centre support- 50 mm n b pipe. area : 2.5 m x3.5 m. platform height : 2.1 m. chute f r p the topcoat is done using the best quality brand or duly powder coated. spiral slide shall be chute made of frp (fiber reinforced plastic / lldpe (low linear density poly ethyline) having thickness of 4mm slide center support shall be 80mm nb b lass gi pipe. landing module shall be supported by 20mm nb b class gi pipe. slide extension platform shall be made from frp / lldpe. the railing shall be made from 15mm nb and 20nn nb b class gi pipe. all pipes shall be coated with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of std. see sawhandle :-20 mm n b pipe. lever-32 mm n b pipe. colmun : 60 mm n b pipe. bearing : nylon bush press fitted. seats: frp seats with steel frame. the topcoat is duly powder coated. the level of see saw shall be made from 15, 20 and 25mm nb b class gi pipe. the seat of see saw shall be made from frp/lldpe. the stand and bush bearing made in 40mm nb b class gi pipe. see saw lever shall be welded to 5mm thickness ms plate for nut bolting with stand. all pipes flat shall be powder coated to avoid rusting. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size)c37c40c41c39 (as per direction of officer
Tender For corrigendum : tn-11174 supply of spares for esp of unit 1 to 7 at kstps, kota. - outer arm for emitting rapping sys., outer arm for collecting rapping, inner arm of esp for collecting, u" guide for collecting electrodes with inner distance 44.5 mm for stage- 1 to 2, u" guide for collecting electrodes with inner distance 54.0 mm for stage- 3 to 5, spiral emitting electrode 47 turns, wire, 2.7mm (mat for wire uhb-904 l, mat for hook- tube carbon steel), emitting electrode 2.7 mm wire dia, 52 turns spiral type with hook (material for wire uhb-904 l, material for hook tube carbon steel), sleeve for shock bar of esp with ht bolt & nut (m 20x75), sleeve bearing for emitting drive, set ring for cerm, plain bearing, shaft insulator, g d screen sheet, pin for pin wheel i/ii, shaft-i for cerm d50, l-4790mm, shaft-ii for cerm d50, l-4985mm, emitting rapping shaft 40mm dia, 2500mm length, shaft-iii for eerm d50 l-3350mm, emitting drive shaft for stage 3, dia-40mm, l-3306mm, key size 12x8x70, emitting drive shaft iii, dia-40mm, l-2995mm, ms packing shim, 100 mm x 70 mm, thickness 6mm, pin wheel-i (big), pin wheel-ii (small), shock pad for shock bar for esp, shaft sleeve, od 50mm,id 40.5 mm,length 120mm, shaft-i for eerm, d-50 mm, l-4320 mm stage-ii, shaft-ii for eerm, d-50 mm, l-4250 mm stage-ii, emitting drive shaft -ii, d-40 mm, l-3020 mm stage- ii, end shaft for cerm with key slots, d-50 mm, l-790 mm stage-iii to v, shaft-i for eerm, d-50 mm, l- 3120 mm stage iii to v, shaft-ii for eerm, d-50 mm, l- 3290 mm stage iii to v, top coupling for emitting drive shaft-i , d- 40 mm, shock bar guide (f) for stg.-i , 6 slot, shock bar guide (r) for stg.-i , 4 slot, shock bar guide (r) for stg.-ii , 4 slot, deflection plate ms having size 495x230x2.5mm as per drwing enclosed
Tender For corrigendum : tender for supply of pump spares - rear cover v07 mc wcb , front cover v07 mc wcb , gasket rear cover v07 ptfe , gasket casing v96 ptfe , gasket sleeve v96 ptfe , gasket impeller v96 ptfe , mechanical seal cartridge id55 od 82 wl26.5 c/sic duplex vit , casing v96 mc nab , impeller v96 mc nab to nes 747 pt.2 , front wear ring v96 nab to nes 747 pt.2 , back wear ring v96 nab to nes 747 pt.2 , impeller nut v96 mc nab to nes 747 pt.2 , sleeve shaft v96 phosphor bronze , shaft v96 en57 , coupling guard v96 ss304 forming , spring washer m12 ss 316 , plain washer m10 ss316 , spring washer m8 ss 316 , bolt hex m10x1.5 35mm ss316 ft , circlip b110 spring steel , key parallel ss410 408 7 r r , double row angular contact ball bearing 3310-a-2z , lock nut ss m50x15 skf no km10 , lock washer ss id50 skf no mb10 , key ss410 70 10 8 rf , bolt allen m8x1.25x35 ss 316 , grease nipple 1 by 8 inch angled ss 316 , grease nipple 1 by 8 inch straight ss 316 , oil seal od65 x id45 x thk 8 viton , drain plug hex 1 , o ring id 44x3 nbr , key ss410 52 12 8 r r , stud m12x1.75x60l , stud m8x1.25x55l20tx20nss316 , disc coupling n55-230mm spacer , bearing deep groove ball 6310 2z c3 , impeller v07 mc nab , mechanical seal cartridge id 48 od74 wl24.6 c/sic duplex vit , shaft v07 en57 , bearing frame v07 mc wcb , front wear ring v07 mc nab , back wear ring v07 mc nab , gasket impeller w66 ptfe , impeller nut v07 mc nab , sleeve shaft v07 phosphor bronze , hex nut m8 ss 316 , squre head plug 14 bsp ss 316 , coupling spacer-140mm rrs-110 32mm pump end & 42mm motor end , stuffing box v07 mc nab , stuffing box v96 mc nab to nes 747 pt.2 , eye bolt m12x1.75 ms , motor bracket v96 45k motor ms , top mounting plate v96 45kw motor ms , hex nut m16 ss 316 , m12 washer ss 316 , plain washer m16 ss 316 , hex nut m6 ss 316 , bolt hex m16x2 80 mm ss 316 ft , bolt hex m16x2 110mm ss 316 ft , bolt hex m6 12mm ss 316ft , plain washer m6 ss316