Web Analytics Made Easy - StatCounter

Riot Drill Machine Tenders

Get complete information related to latest Riot Drill Machine Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Riot Drill Machine Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Riot Drill Machine Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government And Public Sector

CTN :40220511 Due date: 26 May, 202526 May, 2025 NA
Tender For supply of recentering tool holder for cnc drilling machine, sefas chamfer no. 33712or732 with spares consisting of 10 nos. each as mentioned below a)clamping element (b)screw driver(c)clampin g screw(d)adjusting screw make:kennametal or sandvik or seco or otto bilz or motherson-su mitomo or substantially equivalent.note: the life of re-centring tool holder will be 1250 axles. [ w arranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40158549 Due date: 08 May, 202508 May, 2025 2.88 Lacs
Tender For supply of spares to airport system at kalaburagi airport - supply of 2mp dome camera , supply of 360 degree outer clear lens , supply of 2mp ptz camera , supply of cat-6 utp solid cable , supply of poe switch 8 port , supply of media converter , supply of 12v adaptor , supply of drilling machine

CTN :40126527 Due date: 05 May, 202505 May, 2025 NA
Tender For supply of spares for manually operated under pressure drilling machine under ae(m)wwes-i.

Central Government/Public Sector

CTN :40109524 Due date: 21 May, 202521 May, 2025 NA
Tender For procurement of spares for 1000 mobile drilling rig

CTN :40064236 Due date: 29 Apr, 202529 Apr, 2025 NA
Tender For supply of drilling spares - bearing t4 , bearing t6 , bearing t8 , bearing t10 , bearing 51115 , bearing 6309 , bearing 6205 , bearing 6213 , nq overshft latch with spring , nq innertube latch with spring , nq landing ring , nq shutoff vlave , wash pipe for water swivel kores make , water swivel packing kores make , waterswivel packing 81 mm , wash pipe careleous type

CTN :40078226 Due date: 01 May, 202501 May, 2025 NA
Tender For supply of spares of tml changing drilling machine in sms for nsl nagarnar - filter tml tml 300sb hydrauli ev207400 , filter tml tml 300sb ventilat 20650052 , filter tml tml 300sb high pre 20740043 , seal kit sea tml 20112009-0 , seal kit sea tml 20720019-1 , seal kit sea tml 20720104-1 , seal kit sea tml 20740088-1 , seal kit sea tml 20720064-1 , button tml ind joystick left hand side , button tml ind joystick right hand side , seal kit plu tml 20320026-0 , tml tml 20940012 tml 300s , tml tml 20940001-1 tml 300s , tml tml 20940020-2 tml 300

Central Government/Public Sector

CTN :40041152 Due date: 24 Apr, 202524 Apr, 2025 NA
Tender For design, manufacture, supply & commissioning of portable horizontal end hole drilling & tap ping equipment for assembled bg coach wheel set's axle end hole reclamation from m-16x1.5 mm to m-20 x1.5 mm with maintenance spares and consumables as per annexure-1 [ warranty period: 30 months aft er the date of delivery ]

Central Government/Public Sector

CTN :40018575 Due date: 06 May, 202506 May, 2025 NA
Tender For rate contract for supply of spares of drillmec drilling rigs and workover rigs and the associated equipment

Central Government / Public Sector

CTN :40004695 Due date: 22 Apr, 202522 Apr, 2025 80.37 Lacs
Tender For custom bid for services - supply of spares for railway track maintenance contract at kandla foreshore terminal-schedule - a (supply of railway track material): 1, fish plate 60kg 1meter long, with bolt 12.00 pair, 2, fish plate 52kg 1meter long, with bolt 25.00 pair, 3, fish bolt 25x140 100.00 nos, 4, curved switch 52kg, 1:8.5 with fitting 1.00 set, 5, supply of 50mm ballast 900.00 mt, 6, supply of rail 60kg 3.922 mt, 7, supply of rail 52kg 13.491 mt, 8, check rail distance block 200.00 nos, 9, check rail bolt 25x190 full thred 225.00 nos, 10, single coil spring washar 500.00 nos, 11, j clip 750.00 nos, 12, grsp 5000.00 nos, 13, sleeper 60kg 40.00 nos, 14 juction fix plate 52 & 62 kg combination, 1meter long , (4plate called 1 set) 2.00 set, 9, 15 supply of cms x-ing 52 kg with checkrail &, fitting 1.00 set, 16, erc m-3 5000.00 nos, 17, gfn liner t-3702 (52kg rail & sleeper) 2500.00 nos, 18, ms liner t-3738 (52kg rail & sleeper) 5000.00 nos, 19 gfn liner t-3707 & 3708 (52kg rail & 60kg, sleeper) 2500.00 set, 4 sub-total for schedule - a, schedule - b (railway track work), 1 renewal of tongue rails & stock rails (straight or, curved) complete with fittings & fastenings,, ensuring proper housing & changing of stretcher, bars, if required; but excluding sleepers. work, also includes drilling of hole, if any required and, fixing of fish plates. released rails shall be, stacked at indicated place. {note : 1).one set, means two tongue rails and two stock rails (2), in case when only one tongue & stock rail are, replaced, only 50% of the quantity shall be, payable. (3) if only one tongue rail is replaced,, only 25% of the quantity of switch assembly shall, be payable} for respective item., 2.00 set, 2 deep screening of track in terms of para-238 of, indian railways permanent way manual in other, than psc sleepers of any density and screening, of complete ballast section. it includes opening of, ballast, digging down to specified depth below, bottom of sleeper to provide formation slope of, 1:40 towards drain or any prescribed direction,, taking out caked ballast, muck etc. from entire, ballast section, putting back clean ballast as per, required ballast profile, throwing away screened, muck arising out of screening on toe of bank or, on cess, if low or on spoil banks above top of, cutting (including throwing and leveling, if, required beyond minimum 5m from the edge of, cutting which are upto 3m deep or alternatively, carting it upto 50m for disposing it off beyond, cutting or platforms) as per direction of engineer, in-charge, including cutting cess, if required for, effective drainage upto a distance of 3.5m from, centre line of track on both sides and including, one round of kutcha packing with screened, ballast including attending to track parameter to make track fit for 20 kmph speed. necessary, wooden blocks shall be brought by the, contractor. 450.00 trm, 3 through packing of track, as described in para-, 224 of indian railways permanent way manual - 1350.00 trm, 4 fabrication (including cutting & bending) and, fixing of check rails of all sections as per, railway s approved drawings & specifications for, level crossings / trolley paths, duly cutting rail, flanges, wherever required to correct alignment, and level with railway s rail, fittings & fastenings,, drilling of holes in heck rails with all fittings, e.g., rail screws / grip expansion bolts, brackets,, packing pieces, bolts, washers etc. and as, directed by the engineer in-charge, 192.00 rm, 5 providing and injecting approved grout in, proportion recommended by the manufacturer, into cracks/honey-comb area of concrete/, masonry by suitable gun/pump at required, pressure including cutting of nipples after curing, etc. complete as per directions of engineer-incharge. (the payment shall be made on the, basis of actual weight of approved grout, injected.) epoxy injection grout in concrete/rcc, work of approved, make, 50.0

Central Government/Public Sector

CTN :39792024 Due date: 21 Apr, 202521 Apr, 2025 19.00 Lacs
Tender For development, manufacturing and supply of spares for planetary gearbox of gmrt antenna elevation axis as per the drawings at gmrt khodad, near narayangaon, tal. junnar, dist. pune 410504, maharashtra - "spare gear for planetary gearbox of elevation axis-details- ring gear for stage i,ii,iii as per drawing no- gmrt-08-169-dd-el02-00 and sample givenmaterial- 34 cr ni mo6, blank, blank hardened and tempered, hardness 280- 302 bhn , gas nitriding with case hardness >540 bhn & case depth 0.3- 0.4mm (finished)size-ring od-310 mm , width 220mm, having three different internal gear on same ring-,(i) & (ii) module 2.5 teeth- 92, (iii) module 2.5 teeth -99 work includes with material supply along with necessary machining, drilling tapping, grinding, heat treatment etc and other details as per drawing and sample given.", "spare gear for planetary gearbox of elevation axis-details- sun gear with spline for stage iv as per drawing no- gmrt-08-169-dd-el07-00 and sample givenmaterial- - 34cr ni mo6 ,hardness core- >30 hrc, gears to be grinding finish with case carburized having case hardness : 58-62 hrc and with case depth0.8 1.0 , size- sun gear- module- 5 teeth- 14 width 72mm, spline- module 3 teeth- 24 width-40mm, total length of the part 189 mm work includes with material supply along with necessary machining, grinding, heat treatment etc and other details as per drawing and sample given.", "spare gear for planetary gearbox of elevation axis-details- sun gear with spline for stage iii as per drawing no- gmrt-08-169-dd-el05-00 and sample givenmaterial- 18cr ni mo 7-6 , hardness core- >30 hrc, gears to be grinding finish with case carburized having case hardness : 58-62 hrc and with case depth0.45-0.5 , size- sun gear- module 2.5 teeth- 21 width-46mm, spline- module 2.5 teeth- 21 width 17mm, total length of the part 74mm with internal bore 18mmwork includes with material supply along with necessary machining, grinding, heat treatment etc and other details as per drawing and sample given.", "spare gear for planetary gearbox of elevation axis-details- sun gear with spline for stage ii as per drawing no- gmrt-08-169-dd-el03-00 and sample givenmaterial- 18cr ni mo 7-6 hardness core- >30 hrc, gears to be grinding finish case carburized having case hardness - 58-62 hrc and with case depth0.45-0.5 size- sun gear- module 2.5 teeth- 22,width 36mm spline- module 2.5 teeth- 22 width 17mm total length 63mm with internal bore 22mmwork includes with material supply along with necessary machining, drilling tapping, grinding, heat treatment etc and other details as per drawing and sample given.", "spare gear for planetary gearbox of elevation axis-details- input shaft with one side internal spline gear and other side bore with keyway , as per drawing no- gmrt-08-169-dd-el08-00 and sample givenmaterial- en24 hardened and tempered hardness 260-290 bhnsize- shaft od 65 long 104.5mm internal spline -module-2 teeth 18 width 16mm, other side 35mm dia bore with keywaywork includes with material supply along with necessary machining, drilling tapping, grinding, heat treatment etc and other details as per drawing and sample given.", "spare gear for planetary gearbox of elevation axis-details- planet gear for stage iii as per drawing no- gmrt-08-169-dd-el06-00 and sample givenmaterial- 18cr ni mo 7-6hardness core- >30 hrc, case carburized having case hardness - 58-62 hrc and with case depth0.45-0.5 (finished)gears to be grinding finish size- width 40mm , module 2.5 teeth 39 with internal bore (for bearing fixing) and circlip groove as per drawingwork includes with material supply along with necessary machining, grinding, heat treatment etc and other details as per drawing and sample given.", "spare gear for planetary gearbox of elevation axis-details- planet gear for stage ii as per drawing no- gmrt-08-169-dd-el04-00 and sample givenmaterial- 18cr ni mo 7-6 , hardness core- >30 hrc, gears to be grinding finish , case carburized having case hardness - 58-62
 Loading, Please wait...

Connect us via What's Up