Latest riser pipe Tenders | Government riser pipe Tenders

corporations/Associations/Others

CTN :45723624

02 Jul, 2026 6.00 Lacs

Salem - Tamil Nadu

Tender For supply delivery and fixing of motor and accessories at ward-1 selliyampalayam oht in narasingapuram municipality - supply and delivery of kirloskar make 15hp/11kw/2900rpm three phase/415v/50hz/ac/tefc horizontal centrifugal monoblock pump impeller-mechanical seal (head-20mtr,flow rate-2154lpm) size:100x100mm (local quotation) 15hp horizontal centrifugal monoblock pump, labour charges for erection of horizontal shaft, centrifugal pumpset (coupled/monoblock) in bore well/open well including fixing of suction pipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves,pressure gauges upto the exterior wall of pump room and erection of panel board consisting of tpic switches starter, voltmeter, ammeter, capacitor single phasing preventor and laying and jointing the cables and twinearthing as per ie rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports as required by eb authorities., three phase panel board star- delta with two level guard and auto start supply and delivery of star-delta starter confirming to is 13947, iec60947-1 and as amended thereafter with suitable kw rating for operation in ac/ three phase/50hz (+/- 5%) and 415v (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., ct operated ammeter (65 mm dia) with suppressed scale,voltmeter (65mm dia),voltmeter selector switch,miniature circuit breaker, thermal overload relay, air break contactors suitable for next standard higher kw rating, single phasing preventor, dry running preventor and on/off push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capa citor is to be taken separately). three phase panel board for 15hp, supply,delivery and fixing of the following materials are listed below etc..,as directed by the departmental ofiicers.for service4 core 16sq.mm pvc copper ug cable, for motor3 core 6sq.mm pvc insulated and sheathed flat type copper cable, 150mm di pipe, 100mm gi pipe , 100mm gi flange set, rubber sheet for flange set, ms bolt and nut20mm dia and above x 90mm to120mm length fully threaded bolts andwith nuts 2 nos. , manhole cover 60 x 60cm (heavy duty) with frame, supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary ms flange of table e , gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the departmental officers. 150mm sluice valve, 100amps 4pole mcb, 100amps porcelain fuse unit (500v), 32mm pipe

CTN :45726059

31 Jul, 2026 25.00 Lacs

Tikamgarh - Madhya Pradesh

Tender For inviting rates of handpump repair material for financial year 2026-27 at nagar palika parishad tikamgarh - inviting rates of handpump repair material for financial year 2026-27, head assembly with handle complete (as per isi), head assembly without handle (as per isi), handle assembly complete (as per isi), water tank assembly (as per isi), stand assembly (as per isi), third plate (as per isi), g.i. riger pipe 32 m.m. isi medium b class (3 meter), g.i. riger pipe 32 m.m. isi haevy c class (3 meters), chain with cupling (as per isi), 32 mm g.i. pipe socket (as per isi), 12 mm connecting rod (as per isi) (3 meter), 12 mm connecting rod socket (as per isi), ci cylinder body only (as per isi), ci cylinder assembly with brass asseseries complete, plunger rod for cylinder, upper valve assembly complete brass (as per isi), lower valve assembly complete brass (as per isi), rubber seeting for upper valve (as per isi), rubber seeting for lower valve (as per isi), valve guide (as per isi), spacer (as per isi), brass sleep (as per isi), rubber washer (as per isi), seeling ring (cap packing) of nitric rubber (as per isi), ci reducer cap (as per isi), nut bolt for handpump (as per isi), chain nut bolt tvs (as per isi), bolt for cover (as per isi), spacer for rubber washer (as per isi), pipe lifter for 32 mm (as per isi), pipe wise 3 no. size (as per isi), pipe wise 2 no. size (as per isi), hand pump rod die set (as per isi), pipe die set 32 mm, 32 mm dia u.p.v.c. riser pipe, 32 mm c.i. adopter set for u.p.v.c. pipe, 12 " pipe wrentch (taparia/j.k./ ambika), 14 " pipe wrentch (taparia/j.k./ ambika), 18 " pipe wrentch (taparia/j.k./ ambika), 24 " pipe wrentch (taparia/j.k./ ambika), 36" pipe wrentch (taparia/j.k./ ambika), 16x17 ring spainer, 18x19 fix spainer, screw wrentch (taparia), 6204 bearing, distance piece, hexa blade, hexa frame, pipe tools, 2 tonnes chain block, 3 tonnes chain block, 5 tonnes chain block, handle axle

CTN :45713177

07 Jul, 2026 NA

Jabalpur - Madhya Pradesh

Tender For supply of drilling of borewell up to 345 feet depth , submersible pump set model lsk 40 af 5 hp 50 mm outlet size , gi riser pipe, stainless steel clamps, safety wire rope, nrv, couplings, submersible flat cable , installation of electrical control panel including dol starter , installation

CTN :44971345

01 Jul, 2026 2.18 Crore

Nagpur - Maharashtra

Tender For bid to ras supply of aluminium armoured cable , gi perforated cable trays 100 mm wide x 50 mm depth x 1point 6 mm thickness , raceway 150 mm wide x 50 mm depth x 1 point 6 mm thickness , switch socket 6 modular box 16 amp switch socket 6 amp , providing and laying cat 6 6 pair cable with accessories , supply and fixing of 4 way tpn horizontal db box with accessories , supply and fixing of 63 amp isolator , supply and fixing of 63 amp rccb , supply and fixing of 16 amp mcb , supply and fixing of 40 amp rccb , supply and fixing of 100 amp isolator , supply and fixing of 100 amp rccb , scaffolding , sitc of ups 20 kva with isolation transformer , sitc of 2x2 clean room luminaries , dismantling aluminium gypsum partitions doors windows fixed , dismantling tile work in floors and roofs 10 25 mm thick , cement concrete flooring 124 mix 40 mm thick , modular walls with 60 mm thick puf panels , modular ceiling with 60 mm thick puf panels , epoxy flooring 5 mm thick , aac block masonry 150 230 300 mm thick , 12 mm cement plaster 1 4 mix , vitrified tile 600x600 mm , pvc flooring , plaster of paris putty 2 mm thick , wall painting with acrylic emulsion , granite stone slab for platforms , extra for granite facia drops , extra for openings in granite for sinks , reinforced cement concrete work , centering and shuttering for shelves , steel reinforcement for rcc , stainless steel kitchen sink 610x510 mm , cp brass waste coupling 32 mm , coat hook with bracket , 600 mm long towel rail , cp brass angular stop cock , cp brass bottle trap 32 mm , upvc connection pipe with brass unions , c p sink cock with regular swinging spout table mounted model , c p brass extension nipple 15mmx50mm , stainless steel cabinets under counter and overhead , storage cabinets under counter and overhead , hermetically sealed swing door 900mm w x 2100mm , hermetically sealed swing door 1500mm w x 2100mm h , flush door shutters isi marked non decorative 35mm thick , extra for lipping with teak wood battens 25mm minimum depth , extra for vision panel not exceeding 0 point1 sqm rectangular or square , laminated sheet , h type stainless steel pull handle 304 grade 25x600mm , aluminium extruded section body tubular type universal hydraulic door closer , pair design lever handle on roses and escutcheons with mortise sash lock , dgu glass 1200mm x 1400mm , pass box 580 x 650 x 700 mm id 1 , pass box 230 x 230 x 295 mm id 1 , aluminium work for fixed portions polyester powder coated 50 micron , aluminium shutters for doors windows , glazing in aluminium frames 5mm float glass , pre laminated particle board for panelling 12mm thick , removal and refixing mineral fibre false ceiling tiles 595x595mm , cpvc pipes 15mm nominal dia hot cold water , cpvc pipes 20mm nominal dia hot and cold water , cutting holes in rcc floors roofs up to 15x15cm for drain pipes , trap self cleansing 100mm inlet outlet sand cast iron s and s , trap self cleansing 100mm inlet 75mm outlet sand cast iron s and s , glazed stoneware pipes class sp 1 100mm 1 is1 cement mortar , demolishing cement concrete 136 or richer , cement concrete work up to plinth level 124 mix , square mouth sw gully trap class sp 1 100x100mm p type , corner coving , steel work in built up tubular trusses hot finished welded tubes , eye and face wash station floor mounted dx type double skinned ahu, air cooled outdoor vrf units, ahu connection kit, hepa filter plenum laminar air flow system, gi ducting for tb lab, indoor ducting thermal insulation, exposed ducting thermal insulation, acoustic insulation for ducting, ahu control unit //bid details 2 / 94

State Government

CTN :45706667

10 Jul, 2026 7.06 Lacs

Bhavnagar - Gujarat

Tender For installation of various instruments at lakhanka and hamirpara irrigation scheme - providing, supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anticorrosion finish. complete in all respects as directed by the engineer-in-charge. (1) 90° v-notch-20 x 40 secticin 15 lit/sec , providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in- charge. , providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc. c) concrete grade 1:2:4 and msa-40mm(graded)

State Government

CTN :45721177

06 Jul, 2026 28.75 Lacs

Pakur - Jharkhand

Tender For relocation of 125/115 mm. dia. with. 90 mtrs. different average deep drilled tube well with im-ii hand pump and 32 mm dia. medium class riser pipe by dth rig machine with 125 mm. dia. blue upvc casing pipe, construction of platform and drain etc

State Government

CTN :45678034

14 Jul, 2026 28.50 Lacs

Jummu - Jammu And Kashmir

Tender For providing, installation, testing and commissioning of electro-mechanical equipments at newly drilled t/well peerkho. - providing of 3 nos. submersible pump sets :- the job involves providing of 3 nos. submersible pump sets of specification 15000 gph x 80 m head of reputed make (one no. operational and two nos. standby) along with allied accessories to be installed in 10/12 inch dia. deep drilled new tube well peer kho. the job includes fabrication, providing and fitting of 2 no. clamps of span as per the required length to be fabricated and fitted with submersible pump sets with the help of heavy duty bolts and nuts (01 no. clamp to each pump set). the job also includes fabrication of 2 no. graded expander/ reducer for nrv of required size to be fabricated out of suitable thickness ms pipe threaded at one end and flanged at the other end. fitting of reducers/ expanders with 125 mm dia. column pipes at one end with flanged joint and with the discharge outlet of the submersible pumps at the other end.column pipes :- fabrication and providing of 125 mm dia. b class ms 20 nos. column pipes flanged on both ends. the length of each pipe shall be 3 mtrs. and shall be completely leak proof. the ms pipe shall be confirming to relevant isi specifications. the heavy duty flanges shall be furnished properly. one end of the flange shall be faced in such a way that a leak proof joint is made by providing and fitting a rubber sheet in between the two flanges and tightening it with nuts and bolts. each flange shall be provided with 6 no. equidistant holes of required dia. the job also includes welding of flat iron strips at each end for giving extra strength to the flanged joint and providing of 2 no. grooves on each flange on opposite sides for submersible cable to be accommodated though it. the welding of heavy duty flanges with the pipe should be carried out with superior quality pipe welding electrodes. then painting all the pipes with a coat of anti corrosive paint and two coats of super enamel paint. ms well cap, washout and riser pipe :- fabrication and fitting of ms well cap as per casing dia. of 8 mm thickness with one hole of approx 125 mm dia. in the centre and with holes/ cuts at an appropriate distance for passing submersible cable. providing and fitting of an arrangement for gi fitting near the discharge head outlet to provide water feeding to the gravel around the tube well casing. laying of delivery line for making of inter connections of top column pipe of new tube well by way of fabricating 900 ms bend out of 125 mm dia. ms pipe, welding of 2 no flanges one at each end. fabrication and fitting of 125 mm dia. ms pipe connection piece long as per site requirement with 90 degree bend with the help of nuts, bolts, washers, rubber sheet in between for leak proof joint. fitting of 1 no. 125 mm dia. heavy duty c.s. sluice valve through a connection piece as per site condition. fabrication, providing and fitting of 1 mm dia. heavy duty cast steel reflux valve. the sluice and reflux valve shall be confirming the isi standards and shall be of reputed make. fabrication and fitting of another 125 mm dia. connection piece flanged at both ends for working of washout by way of interconnecting delivery pipe through tee joint with the washout pipe.. fabrication and fitting of 1 no. blind flange at the end of washout. painting of exposed parts of the delivery line with two coats of anti rust primer and one coat of super enamel paint. the job also involves fabrication and fitting of one set of u-shaped clamps (for holding 125 mm dia. pipe) on the top column pipe for holding of column assembly on the casing and fabrication of 1 set of u- clamps to be used for extraction/ lowering of pump set along with column assembly. complete job includes cost of material, labour charges and carriage etc. and also making provision for wash out by providing and fitting of sluice valve of c.s of required capacity as per site conditions.lowering of submersible p

Central Government/Public Sector

CTN :45688716

06 Jul, 2026 NA

Sonbhadra - Uttar Pradesh

Tender For 300044814 chain pulley block 20 ton , 300044814 scaffolding pipe

CTN :45692588

02 Jul, 2026 16.49 Lacs

Jamtara - Jharkhand

Tender For water treatment plant cleaning,purchasing of equipments for wtp, laying of di pipes and sluice valves, construction of sv chamber and phed esr repairing for jamtara nagar panchayat. - labour for site clearance -do--e/i, desilting the supply well, intake well /head works, sump of water supply /sewerage works etc. in wet or dry condition including lifts upto 9 m and lead upto 150m as required beyond the work site,stacking, spreading, including necessary guarding, etc. complete, as directed by e/i, supplying and laying of rapid sand gravity filter sand, supplying and laying of rapid sand gravity filter gravel, supplying of bamboo for scaffolding works, supplying of narial ropes for binding works submersible pump set, requirement of plumber class-ii for opening & closing of valve & other related works, requirement of electrician grade-ii for making required connections & other related works, hiring of different tools,chain pulley & tackles for cleaning & other works, disposal of excavated earth & filter bed sand, sand (lead 02k+10p=12 km), gravel (22 k.m. lead), tyre coupling (unique 3409-gn tyre coupling for 100hp & 50hp), bosch lithium based grease, graphit gland pack rope 12mm, graphit gland pack rope 16mm, 2.2kw (3hp) foot mounted motor tefc 1500 rpm 3-phase motor for clariflocculator, multi-blade paddles mounted on central shaft driven by foot-mounted geared motor, onload changeover switch 800a,415v, 4 pole, digital voltmeter (0-500v)-3 phase indicator, digital ammeter (0-500a)-3 phase indicator, led indicator lamp or phase light (r/y/b/g), pvc/xlpe insulated pvc sheated heavy duty,armoured lt cable with aluminium conductor voltage upto and including 1100 v, 240sqmm, 3.5 core, 2.5 sqmm isi marked frls pvc insulated, single core copper conductor cable, 1.5 sqmm isi marked frls pvc insulated, single core copper conductor cable, laying of one number pvc insulated and sheated/xlpe power cable of 1.1kv grade of size not exceeding 35sqmm direct in ground including excavation, sand cushioning and refilling the trench, tapered bearing 7316 mcb (large), deep groove ball bearing 6311 mcb (small), chain pulley block hoist 5 tonne, 360 rotation, 3mtr lifting height, pipe wrench, 18 inch taparia adjustable heavy duty pipe wrench, pipe wrench, 14 inch taparia adjustable heavy duty pipe wrench, 1/2" sqaure drive flank drive taparia goti 22mm socket set, 1/2" sqaure drive flank drive taparia goti 20mm socket set, rachet wrench, 18 inch single sided rachet wrench, 1/2 inch drill bit for threading di/ci pipe, tata agrico hammer -dfs- 2.5kg, 6 inch tyton epdm/sbr rubber gasket for 150mm di pipe conforming to is:5382 isi mark, 4 inch tyton epdm/sbr rubber gasket for 100mm di pipe conforming to is:5382 isi mark, 6 inch di end cap flanged type for 150mm di pipe, 4 inch di end cap flanged type for 100mm di pipe, epdm rubber gasket for non-return valve, earthwork in excavation in foundation (as per i.s. 3114/1965 for laying of different types & sizes of pipes) so as to give one meter average cover over the the socket of pipe with disposal of excavated earth within initial lead lift as per specification & direction of e/i (k-7 150mm), earthwork in excavation in foundation (as per i.s. 3114/1965 for laying of different types & sizes of pipes) so as to give one meter average cover over the the socket of pipe with disposal of excavated earth within initial lead lift as per specification & direction of e/i (k-7 100mm), earthwork in excavation in foundation (as per i.s. 3114/1965 for laying of different types & sizes of pipes) so as to give one meter average cover over the the socket of pipe with disposal of excavated earth within initial lead lift as per specification & direction of e/i (k-7 100mm repair), earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches wit