Web Analytics Made Easy - StatCounter

River Training Wall Tenders

Get complete information related to latest River Training Wall Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic River Training Wall Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding River Training Wall Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

State Government

CTN :41276815 Due date: 18 Aug, 202518 Aug, 2025 1.07 Crore
Tender For construction of boundary wall at polyakala and avantipur barodiya in composite tehsil by barbed wire and brick masonry dist shajapur

State Government

CTN :41195316 Due date: 08 Aug, 202508 Aug, 2025 2.45 Crore
Tender For supply of demolition of brick work and stone masonry , dismentaling tiled of stone , dismentling doors, windows, ventilators etc , removing and scraping of old deteriorated plaster of any thickness , dismentaling aluminium gypsum partition, door, window, and fixed glazing and false ceiling , dismantling santtary fittings , brick work , providing and fixing g.i. hexagonal chickenmesh , providing 15mm thick cement plaster , glass door with aluminium frame corner , flush door with wpc frame , flush door , standared extruded of alluminium section , applying two coats of putty and two coats of primer , plastic emultion paint , vitrified flooring , complete carpet system with the manufacturers approved adhesive , kota stone slab , grid ceiling , plain gypsum board frmr grade ceiling , armstrong wooden grid ceiling , chair type 01 main chair , chair type 02 chair , accoustic panelling , training room chair , custom made furniture , ply wall paneling finish with veneer finish , ply palmet work , frosted sparkling glass film , cement sheet , low height storage , full height storage , urinal partition , plumbing fixture , screw down bib taps , white glazed vitreous china wall mounting type european type water closet , washbasin with single hole for pillar tap , c.p. brass waste for washbasin or sink. a 32mmdia. , providing and fixing urinal , chromium plated, bottle trap , chromium plated brass half trun flush cock , kitchen sink , rubber plug for sink or wash basin. , m.i. fisher union for washbasin , c.p. brass towel rail comlete , toilet paper holder , pillar tap , bevelled edge mirrror , signages , wall mounted customised ss fonts signages , art work , roller blind , digital clock , stainless steel dustbin , square pedal bin 10x15 stainless steel dustbin , s.s finish pot , artificial plant , electrical work , secondary light points , one light point , bell point , 6a socket with one 6a switch , ) /bid number : gem/2025/b/6490197 * /dated: 24-07-2025 & & / bid document 1 / 83 & & ' ' /item category 16a socket with one 16a switch , one fan point , 20a - 6 pin switch 20 amp indicator switch socket for ac , flexible copper frls cable , providing and erecting switch board , supply and laying of pvc medium duty conduits , t.v. socket with back box, harware etc. , telephone socket with back box, harware etc. , rj 45 data point socket with back box,harware etc. , cat-6 t with cable with requrie harware and accessories etc. , tv rg-6 cable with requrie harware and accessories etc. , 4 way splitter with wall mount boxes,harware etc. , rg-11 cable to be laid with pvc condiut ,pull boxes,harware etc. , 3phase and 1 phase distribtuion box , medium voltage cable end termination , 4c x 6 sq. mm al xlpe armoured cable , 4c x 10 sq. mm al xlpe armoured cable , 3.5 c x 120 sq. mm al xlpe armoured cable , cable end termination and connection , 4c x 10 sq. mm al-cu xlpe armoured cable , light fixtures fans , high speed 50 watt ceiling fan with double , exhaust fan , removing all electrical material , cctv camera , dome camera , nvr , hard disk , network switch , network rack , 65 uhd led display for cctv , conduits and pipes , 8 modem jack for computer open rj-45 cat-iii , lan cable , network switch , fire alarm system , fault isolator , photothermal detector , thermal detector , fire survival armoured cable , fire alarm panel , av is to controller , chairman unit microphone with flexible stem , delegate unit microphone wit flexible stem , multicore conference cable , ceiling or wall mount speaker , power amplifier , digital signal processor , speaker cable , presentation point -pop up box , main led display size , usb camera for soft vc , multi format presentation switcher , multiformat active table plate transmitter , hdmi receiver , lan switch , hdmi - hdmi cable , 4-pair cat5e shielded twisted pair stp cable , usb , usb hub , equipment rack , cassette type split air- , split ac machine , ms angle

CTN :40770150 Due date: 30 Jul, 202530 Jul, 2025 NA
Tender For bid to ras supply of living frp hut and toilet block - fibre glass reinforced plastic frp hut 10 to 12 men , double bunk , mattress , fire extinguisher , kero room heater , almirah , water dispenser , rack , tarpaulin , lantern , lightning conductor , field water heating devices , solar street light , repair kit , pegs , 20 w led tube light fitting , bulk head fitting , moduar switch socket , pvc casing and capping , wire single core , star headed screws , mcb 10 to 32 amp sp , elect wire two core , elect wire , ceiling rose , change over switch , electrical and telephone , pvc pipe , cgi sheet , gi pipe , frp iwc , pvc bend , pvc tee , pvc p trap , pvc socket , ppr gate valve , ppr tank connector , ppr elbow , ppr tee , sealing thread , ppr tee reducer , ppr pipe , ppr union , ppr socket , ppr reducer socket , long body bib cock , ppr wall clamp , hdpe or pvc water tank , tank staging , silicon gun machine , silicon tube , reinforced nyloguard , adhesive sr 998 isi mark , drilling machine , mason thread nylon , adjustable spanner , screw driver , screw driving machine , self supporting aluminium step ladder , trawal brick , plier side cutting , phawarh , shovel hand , measuring tape 5mtr retractable , cement , random rubble stone masonry , coarse sand , stone aggregate crushed stone , toilet block , frp and puf foam roof curved shape panel , frp and puf foam wall panels , frp and water proof ply wood , frp door , frp frame with sliding shutter ventilator , 5mtr long 8mm galvanized swr wire , long steel angle iron , neoprene gaskets , bolts nuts and washers , holder pendent , auto rechargable led bulb , mcb , star screw full thread , insulation tape , elect wire single core copper conductor , elect wire two core copper conductor , modular switch piano , mcb box 2 way spn , pvc modular switch board , pvc swr bend , pvc swr bend plain , pvc swr tee , pvc short connection , hdpe water tanks , cp pillar tap , vitreous china wash hand basin , bathroom cabinet with looking mirror , 100mm dia stainless steel grating , ss soap dish holder , barbed wire , laip , hand gloves rubber

CTN :41166609 Due date: 28 Jul, 202528 Jul, 2025 16.49 Crore
Tender For mgsy/25-26/ kahalgaon /02 - construction of h.l. bridge at dobhi ghat on gerua river on khiridanr to makanpur road, block- sanhaula, foundation, excavation for structures, earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material., providing and constructing temporary island 16 m diameter for construction of well foundation for 7 m diameter well (assuming depth of water 1.0 m and height of island to be 1.25 m including royality for earth @ rs. 5526.40 for each island.), providing and constructing one span service road to reach island location from one pier location to another pier location including royality for earth @ rs. 330.00 per m for service road., providing and laying cutting edge of mild steel weighing 40kg per metre for well foundation complete as per drawing and technical specification., plain / reinforced cement concrete in well foundation complete as per drawing and technical specification well curb(i) rcc m-35 grade, well steining(iii) rcc m-35 grade, bottom plug(i) pcc grade m-20, top plug(ii) pcc grade m-20, well cap(ii) rcc grade m-30, sinking of 8 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specification. depth of sinking is reckoned from bed level.(sandy soil(i) depth below bed level upto 3.0 m.), (ii) beyond 3 m upto 10 m depth, (iii) beyond 10 m upto 20 m, (iv) beyond 20 m upto 30 m, sand filling in wells complete as per drawing and technical specifications, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawings and technical specifications clauses 1000 and 1202, substructure, r.c.c. grade m-30 in substructure complete as per dwg & tech specification (upto 5 m ht), r.c.c. grade m-30 in substructure complete as per dwg & tech specification (5 to 10 m ht), r.c.c. grade m-35 in substructure complete as per dwg & tech specification, supplying, fitting and placing hysd bar reinforcement (fe 415) in substructrue complete as per drawings and technical specification clauses 1002, 1005, 1010 & 1202, supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the structures with slope of 1(v):20(h) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7, backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification clause 1204.3.8, providing and laying filter media with granular crushed aggregates (jhama metal) as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification clause 1204.3.8, superstructure, providing and laying reinforced cement concrete in superstructure complete as per drawing and technical specifications clauses 800, 1205.4 and 1205.5, supplying, fitting and placing hysd bar reinforcement (fe 415) in superstructrue complete as per drawings and technical specification clauses 1002, 1010 & 1202, providing and laying cement concrete wearing course m-30 grade including reinforcement complete as per drawing and technical specifications clauses 80

CTN :41166601 Due date: 29 Jul, 202529 Jul, 2025 7.00 Crore
Tender For rrsmp/25-26 bagaha-1/03 - khabtola gulten miyake ghar se shekh karmulah ke ghar tak, clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per technical specification clause 202., dismantling of existing structures, like culverts, bridge,retaining wall and other structures comprising of brick masonary including unserviceable material and stacking the serviceable material with all lift and lead of 1000m as per, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per technical specification clause 302.3, construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth

CTN :41166608 Due date: 29 Jul, 202529 Jul, 2025 5.68 Crore
Tender For rrsmp-25-26 chakia-03 - dekha bandh to ajit singh ke tola tak, clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per technical specification clause 202., cement cuncrete, reinforced cement concrete, dismantling of existing structures, like culverts, bridge,retaining wall and other structures comprising of brick masonary including unserviceable material and stacking the serviceable material with all lift and lead of 1000m as per (stone masonary/brick masonary), construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of un-reinforced, plain cement concrete pavement (m35 grade) over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form paver, spread, compacted and finished in a continuous operation including provision of 0.5 x 0.5 panel, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures as approved, curing compound, finishing to lines and grades as per drawing, reinforced

CTN :41166616 Due date: 28 Jul, 202528 Jul, 2025 21.62 Crore
Tender For mgsy/25-26/ teghra /03 - excavation for structures , earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. up to 3.00 m depth ., providing and laying cutting edge of mild steel weighing 40 kg per metre for well foundation complete as per drawing and technical specification. as per morth clause no. - 1200&, plain cement concrete in open foundation complete as per drawing and technical specifications pcc grade m -15 below abutment well cap, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification rcc m-35 in well curb, providing plain cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , pcc m-25 in well bottom plug, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , rcc m-25 in well steining, providing plain cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , pcc m-25 in well intermediate plug, well sinking as per technical specification, depth 0.00m to 3.00 m (clay soil), depth 3.00m to 10.00 m (sandy soil), depth 10.00m to 20.00 m (sandy soil), depth 20.00m to 30.00 m (sandy soil), for 7.00 m dia well :; pier, depth 0.00m to 3.00 m (clay soil), depth 3.00m to 10.00 m (sandy soil), depth 10.00m to 20.00 m (sandy soil), depth 20.00m to 30.00 m (sandy soil), sand filling in wells complete as per drawing and technical specifiction. as per morth clause no. - 1207, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , rccm-35 in well cap, providing and constructing one span service road to reach island location from one pier location to another pier location including royality for earth @ rs. 225.00 per m for service road., providing and constructing temporary island 16 m diameter for construction of well foundation for 8m dia. well in one water, providing and constructing temporary island 16 m diameter for construction of well foundation for 8m dia. well in four water, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawing and technical specifications , tmt in foundation , refer bbs ,qty = 67.622+155.612 =223.234 t, confirmatory boring at abutment and pier location, back filling behind abutment, wing wall and return wall complete as per drawing and technical specification, providing and laying of filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of morth specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification., plain/reinforced cement concrete in sub-structure complete as per drawing and technical specificationsheight upto 5m , rcc grade m30, plain/reinforced cement concrete in sub-structure complete as per drawing and technical specifications ,rcc grade m30 , height 5m to 10m, supplying, fitting and placing hysd bar reinforcement in sub-structure complete as per drawing and technical , reinf , qty = 23.851+24.330+1.762+0.313+1.289+1.139 =, providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specificatio

CTN :41166617 Due date: 28 Jul, 202528 Jul, 2025 24.46 Crore
Tender For mgsy/25-26/ manjhaul bakhari /01 - excavation for structures , earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. up to 3.00 m depth ., providing and laying cutting edge of mild steel weighing 40 kg per metre for well foundation complete as per drawing and technical specification. as per morth clause no. - 1200&, plain cement concrete in open foundation complete as per drawing and technical specifications pcc grade m -15 below abutment well cap, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification rcc m-35 in well curb, providing plain cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , pcc m-25 in well bottom plug, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , rcc m-25 in well steining, providing plain cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , pcc m-25 in well intermediate plug, well sinking as per technical specification, depth 0.00m to 3.00 m (clay soil), depth 3.00m to 10.00 m (sandy soil), depth 10.00m to 20.00 m (sandy soil), depth 20.00m to 30.00 m (sandy soil), for 7.00 m dia well :; pier, depth 0.00m to 3.00 m (clay soil), depth 3.00m to 10.00 m (sandy soil), depth 10.00m to 20.00 m (sandy soil), depth 20.00m to 30.00 m (sandy soil), sand filling in wells complete as per drawing and technical specifiction. as per morth clause no. - 1207, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , rccm-35 in well cap, providing and constructing one span service road to reach island location from one pier location to another pier location including royality for earth @ rs. 225.00 per m for service road., providing and constructing temporary island 16 m diameter for construction of well foundation for 8m dia. well in one water, providing and constructing temporary island 16 m diameter for construction of well foundation for 8m dia. well in four water, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawing and technical specifications , tmt in foundation , refer bbs ,qty = 67.622+155.612 =223.234 t, confirmatory boring at abutment and pier location, back filling behind abutment, wing wall and return wall complete as per drawing and technical specification, providing and laying of filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of morth specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification., plain/reinforced cement concrete in sub-structure complete as per drawing and technical specificationsheight upto 5m , rcc grade m30, plain/reinforced cement concrete in sub-structure complete as per drawing and technical specifications ,rcc grade m30 , height 5m to 10m, supplying, fitting and placing hysd bar reinforcement in sub-structure complete as per drawing and technical , reinf , qty = 23.851+24.330+1.762+0.313+1.289+1.139 =, providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical sp

CTN :41166618 Due date: 28 Jul, 202528 Jul, 2025 23.47 Crore
Tender For mgsy/25-26/ manjhaul bakhari /02 - excavation for structures , earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. up to 3.00 m depth ., providing and laying cutting edge of mild steel weighing 40 kg per metre for well foundation complete as per drawing and technical specification. as per morth clause no. - 1200&, plain cement concrete in open foundation complete as per drawing and technical specifications pcc grade m -15 below abutment well cap, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification rcc m-35 in well curb, providing plain cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , pcc m-25 in well bottom plug, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , rcc m-25 in well steining, providing plain cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , pcc m-25 in well intermediate plug, well sinking as per technical specification, depth 0.00m to 3.00 m (clay soil), depth 3.00m to 10.00 m (sandy soil), depth 10.00m to 20.00 m (sandy soil), depth 20.00m to 30.00 m (sandy soil), for 7.00 m dia well :; pier, depth 0.00m to 3.00 m (clay soil), depth 3.00m to 10.00 m (sandy soil), depth 10.00m to 20.00 m (sandy soil), depth 20.00m to 30.00 m (sandy soil), sand filling in wells complete as per drawing and technical specifiction. as per morth clause no. - 1207, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , rccm-35 in well cap, providing and constructing one span service road to reach island location from one pier location to another pier location including royality for earth @ rs. 225.00 per m for service road., providing and constructing temporary island 16 m diameter for construction of well foundation for 8m dia. well in one water, providing and constructing temporary island 16 m diameter for construction of well foundation for 8m dia. well in four water, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawing and technical specifications , tmt in foundation , refer bbs ,qty = 67.622+155.612 =223.234 t, confirmatory boring at abutment and pier location, back filling behind abutment, wing wall and return wall complete as per drawing and technical specification, providing and laying of filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of morth specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification., plain/reinforced cement concrete in sub-structure complete as per drawing and technical specificationsheight upto 5m , rcc grade m30, plain/reinforced cement concrete in sub-structure complete as per drawing and technical specifications ,rcc grade m30 , height 5m to 10m, supplying, fitting and placing hysd bar reinforcement in sub-structure complete as per drawing and technical , reinf , qty = 23.851+24.330+1.762+0.313+1.289+1.139 =, providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical sp

CTN :41153893 Due date: 28 Jul, 202528 Jul, 2025 3.00 Lacs
Tender For csc at wno 9 garhen mohalla sc pyt purmandal, block purmandal, under sbm(g) ii - earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: all kind of soil, disposal of 1 mtr from cutting edge., providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size), providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)., providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), brick work with common burnt clay (non-modular) bricks of class designation 7.5 in super structure above plinth level upto floor five level including curing in cement mortar 1:6 ( 1 cement : 6 coarse sand), half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in cement mortar 1:4 ( 1 cement : 4 coarse sand)., brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 ( 1 cement : 6 coarse sand)., reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 , landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with (1:1.5:3)., steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level, centering & shuttering incl. propping and removal of same in foundation and footings, centering & shuttering incl. propping and removal of same in suspended floors & soffits of slab, centering & shuttering incl. propping and removal of same in edges of slab, providing and applying 12 mm thick cement plaster in (1 cement: 6 fine sand) mix., providing and applying neat cement punning to plastered sufrace., providing and applying 6 mm thick cement plaster in (1 cement : 3 fine sand) mix for ceilings, providing and fixing 1st quality ceramic glazed floor tiles conforming to is : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete., providing and fixing 1st quality ceramic glazed wall tiles conforming to is : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge over 12mm thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete., providing & fixing electric points incl. laying of conduit pipes, fan box & wires of required thickness and approved make as per the engineer-in-charge incl. fixing of switches, lamp holder, complete job., providing and fixing water closet squatting pan ( indian type w.c. pan) wit
 Loading, Please wait...

Connect us via What's Up