Latest riveting gun Tenders | Government riveting gun Tenders

CTN :45736380

08 Jul, 2026 NA

Bareli - Madhya Pradesh

Tender For supply of 4/8 indent crimping tool micro crimp m/s rennsteig part no. 875000006 with 12 position locator m/s rennsteig part no. 87500453 suitabale for cable size 0.14 to 6 sq mm/awg 26-10 make:dmc/harting/rennesteig only [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45739637

22 Jul, 2026 NA

Kanpur - Uttar Pradesh

Tender For crimp tool

Central Government/Public Sector

CTN :45702799

02 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot miscellaneous scrap - 98090616: cond. & u/s. hand tools scrap such as double end spanner, adjustable spanner, die spanner, monkey spanner, ring spanner, t spanner, box spanner and all types of spanners, allen keys, cutting pliers, different type of screw driver, hacksaw frame & blades, hammer ball, slege hammer, nose pliers, pipe wrench, hand crimping, faring tool,chisels, torque wrench and all types of wrenches, augars,iron plair, beater, sickle,knife,crow and claw bars,ratchet, tong smith, chiesel, jig saw blade, circular saw blade, scissor, hooks, measuring canes, pneumatic riveting gun, tool holder, inside, hammer, feeler gauge, screw gauge, pickaxe,outside micrometres, all types of gauges, handle tap, grease gun adopter, spikes extractor, of sorts and sizes and all other scrap tools as is where is condition with/without attachment of wood/plastic handle. location:tub no.7 inside of ward04/ssd/ptj.

Central Government/Public Sector

CTN :45702769

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. and u/s tools scrap such as double end spanner, adjustable spanner, die spanner, monkey spanner, ring spanner, t spanner, box spanner and all types of spanners, allen keys, cutting pliers,handoperated oil pump, screw driver, hacksaw frame & blades,hand cuffs,cash chest,hammer ball,hardness tester,, slege hammer, nose pliers, pipe wrench,ball pen hamer,cutting piler,chisel long/short,torque wrench,electrical tools, instruments, gauges with or without wooden handles,adjustable tie rods,allenkeys.allen bolt bor lhb,double leg chain,flat file,high tensile bolt,hydraulic nut,hallow adopter for dm,hand hoe,shovel,adjustable tie rod,ratchet type torque wrench,single pully block,motor pan iron,fth pipe,carbide tipped tools,steel lettr punch, pulllift,allenkey,allen socket,box spanner tubular and other,foot ruler,measuring tape,open jaw spanner,ring spanner,ratchet box,spirit level,screw driver,screw fixing cgr,vice grip plier,pulley block single sheave, hand operated pulling and lifting machine,grease gun,punches,hand crimping, bi hexagonal socket, water pump pliers, wrench coach double pliers, faring tool, hand barrel pump, hydraulic crippling tools,sledge hammer,pipe wrench, defective damaged iron tools,counter weight, , chisels,manual weighment tripod, pull lift with or without chain, weighing buds, tirfor, come along clamp, scale counter w/o nfs, torque wrench and all types of wrenches, augars, bearing puller,oil can,weight metric, iron plair, beater, crow and claw bars, mamooty,manual tripod weights, manual weighning scale, hydraulic pallet truck,ht vcb panel and lt panel released items, barrel pump, tommy bar,ratchet, tong smith, chiesel,hydraulic jack trolley, jig saw blade, circular saw blade, scissor, hooks, measuring canes, pneumatic riveting gun, drill sleeve, tool holder, inside, outside micrometres, all types of gauges,fire buckets,fire bucket stand, handle tap,platofrm trolley, grease gun adopter, spikes extractor, metric weight with handle, steel letter punch and all types of punches, all types of files, pulley puller , blower, hand driller of sorts and sizes and all other scrap tools received from different departments in ferrous nature with/without attachment of wood/plastic handle. pl.no. 98090616. custodian: cdms-rsf-gsd-per. note: 1) any aluminium/brass items or hss tools(drill bits/saw) found during delivery should be handed over to custodian. 2) empty barrels/boxes/containers, gi/any locks, electronic weighing machine, should be handedover to the custodian. location: (1)entrance of old rsf ward annexe,(2)old rsf ward annexe(rhs)

State Government

CTN :45671182

30 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For supply of material as per annexure-i , is required in operation circle dehra working under chief engineer (op.) kangra zone, dharamshala - crimping tool hand operated manual crimping tool suitable to crimp cable/conductors/thimbles from 50 mm2 to 400 mm2 with scissor type handles along with extension handles. the crimping tool should have facility for changing dies. the tool should be supplied in a crimping bag and dies. the separate packet for storing crimping dies of sizes 50,70,95 ,120,150,185,240,300,400mm2. make: jainson/eqivalent

State Government

CTN :45671183

30 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For supply of material as per annexure-i , is required in operation circle dalhousie working under chief engineer (op.) kangra zone, dharamshala - crimping tool hand operated manual crimping tool suitable to crimp cable/conductors/thimbles from 50 mm2 to 400 mm2 with scissor type handles along with extension handles. the crimping tool should have facility for changing dies. the tool should be supplied in a crimping bag and dies. the separate packet for storing crimping dies of sizes 50,70,95 ,120,150,185,240,300,400mm2. make: jainson/eqivalent

State Government

CTN :45671184

30 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For supply of material as per annexure-i , is required in operation circle kangra working under chief engineer (op.) kangra zone, dharamshala - crimping tool hand operated manual crimping tool suitable to crimp cable/conductors/thimbles from 50 mm2 to 400 mm2 with scissor type handles along with extension handles. the crimping tool should have facility for changing dies. the tool should be supplied in a crimping bag and dies. the separate packet for storing crimping dies of sizes 50,70,95 ,120,150,185,240,300,400mm2. make:jainson/eqivalent

CTN :45592297

01 Jul, 2026 30.00 Lacs

Pahalgam - Jammu And Kashmir

Tender For corrigendum : supply installation testing and commissioning of pump unit and other electro-mechanical equipments at laripora pahalgam - supply, installation, testing and commissioning of submersible type pump sets with motors and allied mechanical and electrical components/ items as per manufacturer s recommendations and guide lines, and as per the scope of the work at site. the equipment supplied conform to latest is- standards and codes with fail safe circuits/ devices for(i) over loading (ii) under loading (iii) clogging (iv) shut off (v) low liquid level (vi) single phase prevention devices (vii) over heating etc. the pumping units shall have following technical specifications: pumps:type of pump :non clog centrifugal volute type sewage submersiblepumpscapacity= 28.4lpshead = 17.5 metres or abovesolid handling capacity: 20mm (minimum) quality of water: sewage water to be handled meterial of construction:pump casing : cast ironimpeller : stainless steelpump shaft : stainless steelmotor body : cast ironsealing : dual mech. seal...contd.. as per annexure-a, providing/supplying and fitting of 100 mm m.s flanged delivery main to be connected with existing rising main at site. the job includes providing and welding of m.s flanges 12 mm thickness. the flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make. the cost on account of supply/ fabrication of bends and providing/ fitting of flanges is included in the job. (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per is14846 for regulating the water supply outside the pumping units p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, slanted seat swing check valve( nrv) as per is 5312 p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., gantry over sump :- fabrication, providing, fitting of ms gantry over sump with 02 nos. vertical columns. the gantry fabricated out of ismb-100, 3.25 mts long placed face to face. 300x300mm ms plates 12mm thick fitted on top and bottom side of column .bottom plate welded to the reinforcement of the sump and grouted in 1mx1mx1m pcc 1:1.5:3 mix. ismb-100,3mts long is to be placed and welded to the top plate of the columns .the job also includes providing and fitting of 2-tonne capacity chain pulley block with monorail along with hoisting chain (complete job)., providing and fitting of 50 mm23.5 core ,al pvc insulated cable, armouredfor internal connectionscrimping, taping etc. note:- the cable terminal ends for connection to switchgear at various requisite points shall be al. thimbles and of appropriate size and connected by hydraulic crimp tool only (complete job)., providing and fitting of 4-core 16 mm2 flat /circular submersible copper cable conforming to is: 694 (part 1st) 1964 & is: 694 (part 2nd) - 1964 for submersible pumping unit and other electrical equipment s. the cable connections terminal shall be fitted with copper thimbles of required size (complete job)., fabrication, providing and fitting of main electric control panel of appropriate size fabricated out of 14 swg sheet having required openings/vents and protection class : ip-55 & fitted with accessories as under: a) bus bar chamber: 160 amperes(tpn) b) main circuit breaker (incomer mccb) qty:- = 01 nocurrent rating = 160 amp. c) change over switch:qty. = 01 no.rating = 160 ampere....contd... as per annexure-a., electrification. providing/fitting of lighting and fan

CTN :45555632

06 Jul, 2026 NA

Varanasi - Uttar Pradesh

Tender For corrigendum : crimping tool for ferrule, self-adjusting ratchet type, suitable for crimping insulated and uninsulated wire end ferrule in the range of o.25 to 4.0 mm sq. ensuring four-sided (square) crimp with automatic pressure control, compliance to iec60352-2, din-46228 as per attached annexure. make- wago model- variocrimp-4 part no. 206-1204, or knipex/germany model no.975304, or klauke/germany model-k3014k . note: the firm should submit proof of purchase from an authorised dealer along with the supply. [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45644723

07 Jul, 2026 NA

Dibrugarh - Assam

Tender For supply of aluminium pop rivet (blind rivet ) size-3.2 x 18 mm, grip range : 12-15 mm for riveting gun / riveter machine. firms offer make/brand:- self [ warranty period: 30 months after the date of delivery ] ]

Riveting Gun Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

State Government

Central Government And Public Sector