Latest road safety device Tenders | Government road safety device Tenders

Central Government/Public Sector

CTN :45334841

19 Jun, 2026 NA

Mumbai - Maharashtra

Tender For providing safety fencing (w beam anti crash barrier) along the track in kyn-igp section at required locations to prevent trespassing under special repair den/ne section.

CTN :45322644

01 Jun, 2026 8.70 Lacs

Sawai Madhopur - Rajasthan

Tender For supply, installation, testing and commissioning of phase wire and street light and vairious electrical equipment needed for implementation of budget announcement 2025-26 - providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in, led street light fixture with minimum lumen output 5600 lm, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar bus bar is insulated by heat shrinkable sleeves . earth and neutral bus bar shall be half of the size of phase bus bar. ( cost of bus bar / flexible wire for interconnection between main busbar and switchgear is to be paid extra )(d)wiring between components within switchgear and incoming / outgoing cable shall be done through the terminal block only. direct connection shall not be permitted. each terminal block shall be one piece moulded, barrier type, 650 volt grade, complete with washers, heads, studs with two nuts and identification strips and shall have adequate continuous current rating. for tap-offs, adjacent terminals with shorting strips shall be used. 10% spare terminal blocks shall be provided. wire identification on marking strip shall correspond to the designation of the wiring diagrams. all wire terminals on the equipment shall also be marked with designation corresponding to those of the wiring diagram.(e)all wiring shall be enclosed in plastic channels and neatly bunched and closed in metering chamber, wiring between terminals of various devices shall be point to point (no wire splitting or tee connections) with wires neatly trucked along the back of the panels, adequately supported to prevent sagging.(f)floor mounted panel sh

CTN :45326682

16 Jun, 2026 5.38 Crore

Koraput - Odisha

Tender For road safety measures to nh-26 such as fixing of thrie metal beam crash barrier from km 351500 to 383500 km and from km. 409160 to 434130km at different stretches for the year 2025-26(2nd call)

CTN :45042795

30 May, 2026 NA

Ranchi - Jharkhand

Tender For corrigendum : the supply of road safety equipment with installation used for smooth traffic management on rate contract basis - flexibale road safe coneheight 710 mmbase size 340 x 340 mmweight of cone 4.5 kgsleeve 4 / 6 inchcolor orange , traffic attenuator, speed retardarcement filling required-no , size- l 350 w 250 h 50 mm weight-19kg , test certificate-100tons with 16 nail for installation., reflective safety jackets, traffic control illuminative light battonsize-54cm , dia 4 cm , leds-6r+6g+1w(torch) , rechargeable battery , light area 340mm., warning bollard with solar flasherheight-1230mm , base size-420mm,pole dia-100mm , tape size-4.5 inch x2 tape , weight-6.520 kg., pedestrian bollard channelizers., rwarning baricade bollard with complete trolley., flexibale hazzard marker post., pu rambler strips l-500xw125xh25 mm., reasy expandable barrierheight-1000mm/1mtr, open length-4 mtr , weight-15.5 kg , material-plastic pp., wheel lock clamp., ms collapsible barrier (ms scissor barrier)., tubulor reboundable post with hazarad marker., convex mirror 80 cm ., traffic linear / seprator., traffic drum., road delineator post., road sign board., safety sign board., traffic barrier/road barrier., safety chain., reflector., warnig reflective radum tape (2 inch), solar studssolar pannel -2.2w , ni-mh battery 1.2v/1300mah,visible distance-500mtr,led-6pcs super bright dia 5mm led per side, ip65

Central Government/Public Sector

CTN :45167643

12 Jun, 2026 NA

Mumbai - Maharashtra

Tender For providing safety fencing(anti crash barrier) along the track in kyn-lnlsection at required location to prevent tress passing under sr. den/sesection.

Central Government/Public Sector

CTN :45211199

12 Jun, 2026 NA

Delhi - Delhi

Tender For provision of safety fencing (anti-crash barrier fencing) of 61.1114 kms on gzb-sre section in the section of aden-mut under sr.den-ii.

State Government

CTN :45271734

27 May, 2026 31.31 Lacs

Delhi - Delhi

Tender For providing and fixing temporary barricading through jersey barrier at different location of jahangirpuri drain for safety purpose.

State Government

CTN :44990465

09 Jun, 2026 7.83 Crore

Dhar - Madhya Pradesh

Tender For corrigendum : providing and erection of single roller crash barrier and road safety work on sardarpur-rajgarh-bagh road (sh-65), manawar-mangod road (sh-38), rajpur-palsud-newali road (sh-39)

State Government

CTN :44990458

09 Jun, 2026 6.75 Crore

Seoni - Madhya Pradesh

Tender For corrigendum : providing and erection of single roller crash barrier and road safety work on seoni katangi bonkatta road burhar amarkantak ghat rewa shahdol tilwara chargawan gotegaon gangao nahar

State Government

CTN :44990460

09 Jun, 2026 8.24 Crore

Hoshangabad - Madhya Pradesh

Tender For corrigendum : providing and erection of single roller crash barrier and road safety work on matkuli pachmarhi road between km. 10 to 24 sh 41a 2nd call

Road Safety Device Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

State Government

State Government