Get complete information related to latest Road Blocker Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Road Blocker Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Road Blocker Tenders.
Tender For supply, installation, testing and commissioning of phase wire and street light and vairious electrical equipment needed for implementation of budget announcement 2025-26 - providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in, led street light fixture with minimum lumen output 5600 lm, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar bus bar is insulated by heat shrinkable sleeves . earth and neutral bus bar shall be half of the size of phase bus bar. ( cost of bus bar / flexible wire for interconnection between main busbar and switchgear is to be paid extra )(d)wiring between components within switchgear and incoming / outgoing cable shall be done through the terminal block only. direct connection shall not be permitted. each terminal block shall be one piece moulded, barrier type, 650 volt grade, complete with washers, heads, studs with two nuts and identification strips and shall have adequate continuous current rating. for tap-offs, adjacent terminals with shorting strips shall be used. 10% spare terminal blocks shall be provided. wire identification on marking strip shall correspond to the designation of the wiring diagrams. all wire terminals on the equipment shall also be marked with designation corresponding to those of the wiring diagram.(e)all wiring shall be enclosed in plastic channels and neatly bunched and closed in metering chamber, wiring between terminals of various devices shall be point to point (no wire splitting or tee connections) with wires neatly trucked along the back of the panels, adequately supported to prevent sagging.(f)floor mounted panel sh
Tender For supply of x ray reagents and equipment - x-ray film 8" x10" green base kodak , x-ray film 10" x12" green base kodak, , x-ray film 12" x15" green base kodak, , x-ray film 14" x17" green base kodak, , x-ray film 8" x10" green base fuji, , x-ray film 10" x12" green base fuji, , x-ray film 12" x15" green base fuji, , x-ray film 14"x17" green base fuji, , x-ray developer 22.5 lit. (mak.) powder, , x-ray c.r(fuji) cassette 14x17, , x-ray c.r(fuji) cassite 14x14, , x-ray c.r(fuji) cassite 10x12, , x-ray c.r(fuji) cassite 8x10, , view box (film), , x-ray fixer 22.5 lit. (mak.) powder, , e.c.g. roll bpl company 80mmx20mtrs., , e.c.g. roll bpl company 105mmx20mrs., , lead letter l and r steel (large size), , e.c.g. jelly 250gm. 50mx20mt, , u.s. jelly (sono jelly), , disposable electrodes for t.m.t, , lead letters 0 to 9, (large size), , e.c.g. paper roll for computerised e.c.g. (5 digit), , x-ray hangers make steel, , 8"x10",, , 10"x12",, , 12"x15",, , 14"x17", , x-ray cassettes with intencyfing screen (green base), , 8"x10", (kg8), , 10"x12", (kg8), , 12"x15"(kg8),, , 14"x17" (kg8), , x-ray intencyfing screen, , 8"x10"(kg8), , 10"x12"(kg8), , 12"x15"(kg8), , 14"x17" (kg8), , x-ray dental hanger steel (10 clip), , disposable electrodes for e.c.g, , jelly for t.m.t., , paper for t.m.t., , sono roll for sonography (sony company), , disposable paper, , laser imag film (digital.) 8"x10" (kodak) care stream, , laser imag film (digital.) 10"x12" (kodak) care stream, , laser imag film (digital.) 11"x14" (kodak) care stream, , laser imag film 14"x17" (kodak) care stream, , lead protector 4x6 feet 3 layer., , lead aprin 2 mm., , coan pns, mastoid (constrictor, surrender), , lead divider 6"x12", , lead divider 8"x15", , safe light, , chest stand wall steel., , chest stand standing (without grid), , clip with wire steel., , dental film kodak, , doveloper for auto processor, , fixer for auto processor, , lead barrier 3 layer., , auto processor x ray film doubler, , ecg roll 210 mm 12 channel, , ecg roll 110 mm 16 channel, , ecg roll 100 mm 6 channel, , bpl 9108d 12 channel ecg iz fold paper 210mm*140 mm, , cassettes with screen carestreame for classic direct view scanner, , cassettes with screen carestreame for classic direct view scanner (14 x17), , cassettes with screen carestreame for, , classic direct view scanner (14 x14), , cassettes with screen carestreame for classic direct view scanner (10 x12), , cassettes with screen carestreame for classic direct view scanner (8 x10), , cassettes with screen carestreame for vita flex scanner (14 x17), , cassettes with screen carestreame for vita flex scanner (14 x14), , cassettes with screen carestreame for vita flex scanner (10 x12), , cassettes with screen carestreame for vita flex scanner (8 x10)
Tender For corrigendum : construction of boundary wall powder coated weld mesh panel guard room and 2 nos steel gate with boom barrier at 1 bn itbp joshimath ukd
Tender For supply of 20 pair pijf cable. 0.63 mm copper conductor dia, armored with galvanized steel tapes , polythene insulated , polythene sheathed , jelly filled, telephone cable with pol-al moisture barrier as per the specification no. irs:tc 41-97. or latest. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 2 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For auction sale of others - disposal of miscellaneous scrap released materials such as:- (1) element zink, qty=3025 kg. (2) poly carbonate lens (white) 213 x 102 mm fl, lens (yellow) 136 mm, lens (red) 140 mm, 13mm fl, lens (green)140 mm, 13mm fl, lens 101 mm green for route, lens 101 mm white, lens white, 127 x 70 mm fl, lens white 213 mm, 102 fl, lens green 92 mm, 16 fl, glass jar for ad cell, styron acrylamide nitrite (san) jar with poly polypropylene lid for awe- z type cell, bulb lamp elect. 12v/25w (3 pin), bulb 12v/33w, qty=1898 kg. (3) tag block, tape steel, tape metallic, tape measuring steel, p g clamp, current regulator, 8 way barrier terminal, digital insulation tester, solar panel, 4w/2w combined potable control telephone, indicator disc type 1000 ohm, c spike, a binding wire, 2 wire cnl telephone, digital multi meter (defective), digital tough tester, 10 swg wire, spray gun (broken), earth tester, power meter with sensor, qty=40 kg. (4) set square paratone 60-45, set square paratone 45-4, pvc flexible pipe 20 mm, fiber optical cable assembly, pvc cable channel 15 mm (plastic), qty=10 kg. (5) double ply tent soldries size 12 x 12, soldries single fly tent 12x12x2"x2", banner flag red, flag hand signal red, flag hand green, qty=221 kg. (6) transformer u type, transformer of sorts, signal transformer 110/12v, 40va, transformer 110/110v, 150 va, transformer 300v/12v, 40va, transformer 110/300 v, 60va, transformer 300 v/100v, 150 va, transformer 110v/300v, 150 va, qty=1371 kg. (7) voltage regulator 5 kva (broken & damaged), qty=01 no. (8) voltage regulator 3 kva (broken & damage), qty=01 no. (9) battery charger of shorts, qty=08 nos. (10) 3 pole lamp holder w/o base, lamp harrican, 3 pole lamp holder with base, lamp petromax baby, 3 pole lamp 12v/24w, hand signal lamp, qty=2604 nos. (11) ct box 100 pair, qty=01 no. (12) relay ac 4f/b, (self type), relay non ac, 4f/b, 2f/b(self type), qty=125 nos. (13) relay ecr lamp proving (on aspect) qecx-51, qty=40 nos. (14) relay ecr lamp proving (off aspect) qecx-52, qty=118 nos. (15) relay plug in type dc-track qt2, qty=108 nos. (16) relay plug in type qt1, qty=19 nos. (17) over load relay with time delay of 69 sec (timer 1010), qty=85 nos. (18) relay p1-150 & 150a, (4f/2b, 4f/1b), 24v dc, qty=532 nos. (19) relay of sorts timer relay, relay qucx-1, relay qsra1(8f/8b), esra-1 (8f/4b), relay qfpr1, qty=733 nos. (20) dc track relay rtd 02-0.5v (hm) 2f/b, qty=78 nos. (21) relay thermal time element (2f/1b), qty=47 nos. (22) relay point contractor nr/or (gn), qty=240 nos. (23) plug board nr/or, hv relay, qty=165 nos. (24) relay p-p1 style 2f/1b)(24 pin per relay), qty=24 nos. location:- dhanbad store (gd-i & ii) & re store under sse/sig/w/dhn.
Tender For supply of 100 pair x 0.5mm dia polythene insulated polythene strengthened jelly filled underground telephone cable with poly aluminum moisture barrier annealed copper conductor double steel tape armored with polythene jacketed as per rdso specification no. irs:tc/41/97 with amd 3 or latest , packing length should be 500mtrs per drum. [ warranty period: 30 months after the date of delivery ]