Latest road marking paint Tenders | Government road marking paint Tenders

Central Government/Public Sector

CTN :45733920

20 Jul, 2026 15.00 Lacs

Jamnagar - Gujarat

Tender For repair and resurfacing of certain roads and roads furniture, road marking paint in certain location in at af stn of dwarka and khambaliya under ge (af) jamnagar no 02

Central Government/Public Sector

CTN :45712962

08 Jul, 2026 1.40 Lacs

Nicobar Island - Andaman And Nicobar Islands

Tender For supply of jerry can 20 ltrs , hand sanitizer , air freshener or air pocket 10 in no pkt , tube florescent or led or cfl , lamp cfl or led 20 watt , corrosion inhibitor 750 ml , can plastic 10 ltr capacity , varnish , polythene film length 112 width 18 thk 0.007 , bag gunny 27 x 21 , paint finishing for inter deck white , paint rfu priming red lead , paint coal tar epoxy black , paint remover non-inflammable , rope polypropylene 16 mm isi mark , emery cloth abrasive 11 x 9 is grit 36 , cloth terry flex cotton 36 width , cloth flanet 4 by 2 , cloth coated pvc 102cm wide , roller paint 6 inch , gloves leather v , emery cloth abrasive cloth is grit 36 , detergent solution , bleaching powder stabilised , dry chemical powder 05 kg pack , battery charger with connecting lead ma4234 for sse , grease lg 200 , aluminium telescopic baton size 3 mtr , clip jubilee 3.5 , jubilee clip 1 and half inch , twine sewing plastic , super mop , sand paper , safety glasses or goggles , o ring cord 7mm , ear plugs , anti corrosive compound 750 ml pack , instant glue 1 ltr pack * /bid number : gem/2026/b/7717654 + /dated: 27-06-2026 ' ' / bid document 1 / 28

Central Government / Public Sector

CTN :45726657

20 Jul, 2026 NA

Secunderabad - Telangana

Tender For supply of paint anti corrosive bituminous black to is:9862/81,with amendment no.1 of 1988 and reaffirrmmed 1999 packed in new steel drums plain (non returnable) 20 ltrs capacity to is:2552/79 grade b2. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45704238

17 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For intergard269 (international) -n8010-p063004 , international thinner gta220-n8010-001549 , anti corrosive paint, fresh water tank-n8010-007652 , anti corrosive paint, avgas/avcat-n8010-007653 , h. p. anticorrosive paint for use under non-skid coat- n8010-007694 , h. p. advanced non-skid coating for helo & flight deck-n8010-007693 , inter shield ena 301 alluminium-n8010-p061831 , inter shield ena 300 bronze ani corrosive paint-n8010-p061832 , international thinner gta007-n8010-001174 , tie coat for application of tin free spc a/f paints- n8010-p009601 , brown/light red tin free spc a/f paint for u/w application-n8010-p009602 , red brown/darkred tin free spc a/f paint for u/w application-n8010-p009603 , black colour tin free spc a/f paint for boottop application , interthane 990 white base paint-n8010-p063088 , epoxy based anti corr paint for application in ballast tank- n8010-p009679 , intershiled 300 for weather deck & helo deck-n8010-p064025

CTN :45469215

30 Jun, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of 25b80c012 paint flourscent white (n8010-000137) , 25b80c012 paint rfu priming chlorinaated rubber anti corrosive l/a grey (n8010-000460) , 25b80c012 paint rfu bituminous black acid alkali+ heat resisting (n8010- 000255)

CTN :45727838

25 Jul, 2026 NA

Kharagpur - West Bengal

Tender For supply of set of items for anti corrosive epoxy paint, colour: basalt grey to ral 7012. (i) pack %u2018a%u2019 and %u2018b%u2019 to be supplied in total 25 litres packing. (ii) colourless low odour mineral spirit to dilute epoxy coating material, qty: 2.5 litres per 25 litres of epoxy paint [i.e. 10 per cent of epoxy paint quantity] to be supplied in suitable packing [20 litres maximum]. matl.& specn : -- rdso specification no. rdso/m&c/pcn/123/2018 with rdso's amendment no. 1b (rev. 2.0) as an additional requirement. [ warranty period: 10 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

CTN :45712849

20 Jul, 2026 NA

Khammam-T - Telangana

Tender For supply of anti-corrosive paint colour sea green as per is-13607 and annexure - c , anti-corrosive paint colour po red as per is- 13607 and annexure - c , anti-corrosive paint colour yellow as per is-13607 and annexure - c , anti-corrosive paint colour black as per is-13607 and annexure - c , anti- corrosive paint colour white as per is-13607 and annexure - c , thinner as per is- 14314 and annexure-c , rust converter as per is- 13515 and annexure-c

CTN :45722848

03 Jul, 2026 8.12 Lacs

Guntur - Andhra Pradesh

Tender For providing thermoplastic road marking paint and studs for j.k.c. college road from shresta hospital to maha lakshmi bar in div.no. 42 of gmc.

CTN :45671759

01 Jul, 2026 55.80 Lacs

Bhiwandi - Maharashtra

Tender For providing and supplying spare parts for all type of borewell as per requirement in b.n.c.m.c. area 2026-2027 - providing and supplying spare parts for all type of borewell as per requirment in bncmc area 2026-2027, :item no. 1 : providing and laying in trenches following mm dia. medium grade having embossed as isi mark galvanised iron pipes ?of kilogram/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats including removing existing pipe line if necessary and conveying and stacking the same in pwd chowky or as directed etc. complete. pwd ssr 2022-2023 pg no 268 41.20,41.21 25 mm dia, 32mm dia, item no. 2 : providing and supplying blue mdpe pipes conforming to iso 4427:1996 manufactured from virgin resin pe 80 food grade compounded raw material having blue colour only with quality assurance certificate from quality agencies like wrc / cipet (india) / dvgm / kiwa / spgn etc. for usage in drinking water system. the cost shall include testing of all materials, inspection charges, transportation up to store, transit insurance, loading, as specified and directed, unloading,stacking excluding gst levied by goi & gom in all respect, etc. complete as specified and directed.mjp dsr 2023-24 pg no 128/1/b 25 mm dia, 50 mm dia, item no 3 providing, erecting and giving test of centrifugal monoblock pump set conforming to is 9079 operating at 2900 rpm with ci impeller, priming funnel, cock, suitable flanges at suction and delivery side. pump shall have common shaft for pump and motor. motor shall be suitable for working on 415 v 10%, 3 ph, 50 hz a.c. supply. motor shall be tefc type. pump set shall be suitable for working at various discharge and head requirements. pump shall be erected on provided c.c. foundation block with suitable foundation bolts grouted in c.c. foundation block.centrifugal monoblock pump set (single stage) mjp mech.csr 2023-24 pg no 5 pm 2-1-5] 10 hp, item no 4 : supplying and erecting submersible pump 150 mm dia (with bronze / stainless steel (cf8m) impeller) up to 8 stages mjp mech.csr 2023-24 pg no 01 pm 1-2-1,pm 1-2-2] 1.5 hp, 2.0 hp, item no 5 supplying & erecting pressure booster pump, single phase, 50c/s, a.c.supply of 0.75 kw/ 1 h.p., with discharge of 480 to 13 lpm for 10 to 50 mtrhead & 25 mm suction/ 25 mm delivery pipe, for domestic pressure boosting applications pwd ele csr 2022-2023 pg no 206 12-6-2, item no 6 supplying & erecting pressure booster pump, single phase, 50c/s, a.c.supply of 0.375 kw/ 0.5 h.p., with discharge of 120 to 12 lpm for 10 to 40mtr head & 25 mm suction/ 25 mm delivery pipe, for domestic pressure boosting applications. pwd ele csr 2022-2023 pg no 206 12-6-1, item no. 7 supplying & erecting automatic control panel for 1 ph, 230 volt, a.c. submersible/centrifugal pump set up to 3 hp consisting of dol starter of suitable relay range s.p.p., combined ammeter/ voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip 54 protection. pwd ele csr 2022-2023 pg no 220 12-4-20, item no.8 supplying & erecting automatic control panel for 3 phase , 415 volt, a.c, submersible/centrifugal pump set up to 7.5 hp consisting of dol starter having relay range 9-14 amp,s.p.p., combined ammeter/ voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip 54 protection. control panel should offer single phasing, phase reversal, phase imbalance etc .pwd ele csr 2022-2023 pg no 204 12-4-17, item no. 9 supplying and erecting d.o.l. starter 400v. 3 phase, 50cycles with no volt coil and overload element with necessarymaterials and connected to supply for 10 h.p., item no 10 supplying & erecting flat flexible 3 core 2.5 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.pwd ele csr 2022-2023 pg no 220 12-4-8, item no. 11 supplying, erecting & terminatin

Central Government/Public Sector

CTN :45365796

04 Jul, 2026 11.50 Lacs

Jammu - Jammu And Kashmir

Tender For corrigendum : repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fu

Road Marking Paint Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector