Latest road roller hiring Tenders | Government road roller hiring Tenders

CTN :40627871

18 Jun, 2025 37.84 Lacs

Jhajha - Bihar

Tender For mr-n-24-25- jhajha-01 (kiyajori to jogiyatilha) - kiyajori to jogiyatilha clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 100 m as per technical specification clause 303.1., for 100 m lead @ 80 %, for 100 m lead @ 20 %, construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per technical specification clause 405., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of dry lean concrete sub base over a prepared sub grade with coarse and fine aggregate conforming to is 383 , the size of coarse agg. not exceeding 25mm , agg. cememt ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 , cement content not to be less than 150kg/cm, opc to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant , trasported to site, laid with a paver with electronic sensor , compacting with 8-10 tonnes vibrartory roller, finishing and curing., construction of panel concrete ,plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per caluse 1501.2.2 m 30(grade) coarse and fine aggregates conforming to is:383, maximum s

CTN :40691865

18 Jun, 2025 9.63 Crore

Sasaram - Bihar

Tender For mr-n/24-25 sasaram-02/01 - l068-t05 to panrwa (vr37), clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material(grade 2) : construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., water bound macadam with stone screening gr-ii : providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per technical specification clause 405., water bound macadam gr iii : providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.2 to 0.25 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of panel concrete ,plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per caluse 1501.2.2 m 30(grade) coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a concrete mixer of not less than 0.2 cum capasity and appropriate weigh batcher using approved mix design ,laid in approved fixed side formwork (steel channel,laying and fixing of 125 micron thick polythene film,wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continous operation including provision of contraction and expansion ,construction joints, ap

CTN :40675108

25 Jun, 2025 5.22 Lacs

Multi City - Karnataka

Tender For supply of materials for cc drian work angaragatti village near nandihalli road under mgnrega scheem - vibratory roller 8 tonne_angaragatti cc drain work, water tanker_angaragatti cc drain work, gravel 2.36 mm/murrum_angaragatti cc drain work, water_angaragatti cc drain work, add handling , loading and unloading at 2% on material_angaragatti cc drain work, casurina poles 100 - 150 mm_angaragatti cc drain work, silver oak or equivalent planks 38 mm thick_angaragatti cc drain work, jungle wood runners and planks_angaragatti cc drain work, binding wire_angaragatti cc drain work, tmt bars fe 500_angaragatti cc drain work, hom of vibrator 0.71 days_angaragatti cc drain work, plasticizer / super plasticizer_angaragatti cc drain work, name board_angaragatti cc drain work, add watering charges at 1 % on material_angaragatti cc drain work, mixer (concrete) - 1 cum capacity_angaragatti cc drain work, portland cement_angaragatti cc drain work, coarse sand (zone iii)_angaragatti cc drain work, broken stone aggregate 12 mm to 10 mm size_angaragatti cc drain work, broken stone aggregate 20 mm size_angaragatti cc drain work, broken stone aggregate 40 mm size_angaragatti cc drain work

CTN :40537497

10 Jun, 2025 6.10 Lacs

Multi City - Karnataka

Tender For corrigendum : supply of material for amreshwaraswamy hola to palasan yankappa holadavrege meatling road work at badarli village in badarli gp - display board or cib 460747, granite metal 20 mm 460747, granite metal 40 mm 460747, crushed stone course aggregate 53 460747, vibratory roller 8 tonne 460747, water tanker 460747, gravel 2.36 mm or murrum 460747, water 460747, tractor 40 hp 460747, laboratory asst. sslc passed or mate or supervisor 460747

CTN :40566199

11 Jun, 2025 4.88 Lacs

Hassan - Karnataka

Tender For provide metirals for road construction - laboratory asst. (sslc passed)/mate/supervisor , tractor-40 hp , over hed & other miscllaneous charges , water , gravel 2.36 mm/murrum , water tanker , vibratory roller 8 tonne , crushed stone course aggregate 53 , granite metal 40 mm , granite metal 20 mm , crushed stone chipping 13.2 mm

CTN :40572408

01 Jul, 2025 20.00 Lacs

Satna - Madhya Pradesh

Tender For lok nirman samagri - cement opca cement ppca sand khajuraho sand gold kumhar local brick chimney brick 20x10x10 cm, chimney brick allahabadi, stone rock 20x20x20 cm, ballast 40 mm. hand brocke ballast 95-45 mm hand brocke ballast 65-45 mm hand brocke ballast 40 mm brick ballast 20 mm brick ballast 12 mm brick ballast 6 mm brick dust, gravel, gsba murum, stone slab 25 mma stone slab 30 mma stone slab 40 mma stone slag 100 mma suttering - roof iron/ply a suttering -column beam etc. iron/ply a suttering - roof wood a suttering -column beam etc. wood a mixer machine hire 8 hrs with fuel a vibrator machine hire 8 hrs with fuel a tractor trolley hire 8 hrs fuel levers a dumper hire with driver 8 hrs a tractor leveler hire with fuel driver 8 hrs a static roller hire with fuel driver 8 hrs a vibratory roller hire with fuel driver a jcv machine hire with fuel driver a ms rebar 10,12,16,20 mm a ms rebar 8,6 mm a binding wire, fencing wire, ms grill & jaali, iron door window complete a lime, white cement, distemper, primer, varnish, paint, wire pin oil, concrete pole 0.1x0.1x1.5mm, concrete pole 0.1x0.1x1.8mm, 125 mm/ 150 mm bore cleaning, 125 mm / 150 mm dia d ling category a casing pipe 125 mm dia u.p.b.c.a casing pipe 150 mm dia u.p.b.c.a casing pipe 125 mm dia gfa casing pipe 150 mm dia gfa casing pipe 125 mm dia msa casing pipe 150 mm dia msa minor basic and repair works up to rs. 1.00 lakh for the year 2024-25 road construction works as per i.s.s.r. 02 august 2021 minor basic and repair works up to rs. 1.00 lakh for the year 2024-25 welding works i.s.s.r. as on 02 aug 2021 hyom pipe no.3 300 mm dia. hyom pipe no.3 450 mm dia. hyom pipe no.3 600 mm dia. hyom pipe no.3 9000 mm dia. hyom pipe no.3 1000 mm dia. hyom pipe no.3 1200 mm dia.

CTN :40325418

16 Jun, 2025 50.00 Lacs

Narsinghpur - Madhya Pradesh

Tender For supply of construction work items and machinery on rent for nagar parishad chichli for fy 2025-26 - items list for rate, aggregate (40mm), crusher stone dust, sand, bazara (ctjk), muram/copra (eqje@ctjk), yellow soil (ihyh fev~vh), farsi/cheep (qlhz@phi), bricks (open bhatta), bricks (flyash), cement ppc 43 grade (50kg), jcb machine (with diesel and driver) on rent, poklane machine (with diesel and driver) on rent, road roller (with diesel and driver) on rent, vibratory road roller (with diesel and driver) on rent, paver block - 60mm - m30 with laying work, paver block - 80mm - m30 with laying work, paver block - 100mm - m30 with laying work, paver block - 60mm - m30 - reflactive rubber molded, hume pipe - 150mm dia n.p.3, hume pipe - 300mm dia n.p.3, hume pipe - 450mm dia n.p.3, hume pipe - 600mm dia n.p.3, hume pipe - 1000mm dia n.p.3, hume pipe - 1200mm dia n.p.3, white putty - as per isi specification, binding wire, flag stone 40 mm to 60 mm, flag stone 150 mm to 200 mm, kota stone - 1 to 1 1/4, reinforcement - 8mm, reinforcement - 10mm, reinforcement - 12mm, reinforcement - 16mm, half round r.c.c. pipe - np2 - dia 150mm, half round r.c.c. pipe - np2 - dia 300mm, half round r.c.c. pipe - np2 - dia 450mm, mesh jali steel gi chain fabric fencing, angle iron all size - mild steel, steel bar all size up to 25 mm - mild steel, steel bar all size up to 25 mm - tor steel, steel door with all fittings - angel iron 30x30x5 mm flat iron 25x5 mm sheet 18 gauge, windows with all fittings - angel iron 30x30x5 mm flat iron 25x5 mm sheet 18 gauge, distemper - (interior) isi, emulson - interior isi, oil paints - all color, oil paints - all color, brushes - 1", brushes - 2", brushes - 3", brushes - 4", brushes - 5", brushes - 6", steel centring shutering with fitting and cartling, wood centring/shutring with fitting & carting, labour for distemper washing, labour for emulsion washing, labour for oil paints painting, labour for putty double coat with finishing, labour for steel binding, labour rate for repairs work - per day minimum 08 hours, distempring with distempar & labour - with t & p double coat, emultion with paints & labour - with t & p double coat, oil paints with paint & labour - with t & p, concrete mixer machine with diesal & operetor - per day minimum 08 hours, plate vibrator with petrol & operetor - 2 hp - per day minimum 08 hours, plate vibrator with petrol & operetor - 3 hp - per day minimum 08 hours, pin (needle) vibrator with petrol & operator - per day minimum 08 hours, tiles all size - isi mark, vetrified tiles isi mark - 60 x 60 cm 10mm thik 15:15622, glezed tiles isi mark - 300 x 300 mm 10 mm thik 15:15622, labour for - tiles fitting, tractor with trolly, dammer - per drum of 100 kg, bull dozzer - , , , on , on ,

Road Roller Hiring Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors