Get complete information related to latest Road Traffic Paint Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Road Traffic Paint Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Road Traffic Paint Tenders.
Tender For shell kit for memu ndmc jk 962 a. roof assembly 96216001 000 01 alt "a" - 1no location of sidewall 96214001 000 01 alt "nil" - 1 no end construction pail end 94515001 000 01 alt "nil" - 1no end construction shunting desk side 96215001 000 01 alt "nil" - 1 no firm shall fulfill the manufacturingfacility as per icf/md/specn-200, issue status 01, rev 04 with amendment no 01. firm shall fulfill the manufacturing facility as per icf/md/specn-315,issue status 01, rev.00 with amendment no 01. b.supply of one coach set of bodyshell items and partition frames for memu ndmc jk 962 to drawing nos 1. 96210002 000 01 alt "a" - 1no 2. 96210007 000 01 alt "b"' - 1 no 3. 96210026 000 01 alt "nil"- 1 no 4. 96210046 000 01 alt "nil"- 1 no 5. 96210064 000 01 alt "nil"- 1 no 6. 94410054 000 01 alt "nil"- 2 nos 7. 94410076 000 01 alt "nil"- 1 no 8. 94410072 000 01 alt "nil"- 1 no c. under frame arrangement 96211001 000 01 alt 'b' - 1no firm shall fulfill the manufacturing facility as per icf/md/spec-147,issue status 01 rev.02 with amendment no.02. special condition : packing as per icf/j&t/misc-2201, alt 'e'. packing as per icf/j&t/sk-1809, alt 'a'. packing condition as per drg.no.icf/j&t/misc-2487, alt 'b' the underframeshould be supplied as normal side up & side bearer side down. packing conditionas per icf/j&t/sk-1865, alt 'a'. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # assembly of front part with sole bar. # assembly of modular frame arrangement. # weld parameters to be checked & recorded (c) trestle stage # marking, drilling & tapping of holes wherever necessary. # marking & placing of detail items. # complete welding wherever necessary. # weld parameters to be checked & recorded # assembly & welding of trough sheets. # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (d) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # visual inspection. # final product inspection. note: application of aluminium welding coat to rcf spec mdts-28272 latest revision on top surface of cross members shall be ensured before welding the trough floor with cross members to avoid bi-metallic corrossion [safety item ]
Tender For supply of pu painting kit of ls/rajdhani colours scheme coaches ,consists of seven items (i)thermal barrier high build epoxy ( two pack ) to chapter-iv of rdso spec. m&c/pcn/100/2018, qty.45 ltrs. (ii)epoxy based putty colour white ( two pack ) to chapter-iii of rdso spec. m&c/pcn/100/2018, qty.10 kgs. (iii)heat reflective & thermal barrier full gloss pu enamel top coat grey ( two pack ) colour shade ral-7001 to chapter-v of rdso spec. m&c/pcn/100/2018, qty.47 ltrs. (iv)heat reflective & thermal barrier full gloss puenamel signal red ( two pack ) colour shade isc no. 537 of is:5/2007 to chapter-v of rdso spec. m&c/pcn/100/2018, qty.25 ltrs. (v)thinner compatible heat reflective & thermal barrier full gloss pu enamel to chapter-v of rdso spec. m&c/pcn/100/2018, qty.45 ltrs. (vi)epoxy based zinc phosphate primer ( two pack ) to chapter-ii of rdso spec. m&c/pcn/100/2018, qty.02 ltrs. (vii)epoxy thinner compatible to thermalbarrier high build epoxy ( two pack ) to chapter-iv of rdso spec. m&c/pcn/100/2018, qty.35 ltrs.[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted:max 8 lacs ]
Tender For tender for supply of disconnecting ht and lt supply taking down the defective transformer indoor outdoor type from four pole two pole structure or lifting from the outdoor type foundation or taking out from sub station bldg using a crane of suitable capacity and slings ropes etc as required and shifting the same to civil workshop for repairs complete all as directed for transformer capacity 400 kva , shifting back the repaired transformer indoor outdoor type from civil workshop to site reinstalling at original position and fixing properly on four pole two pole structure or outdoor type foundation or inside a sub station bldg using a crane of suitable capacity and slings ropes etc as required making ht lt side connections and testing for satisfactorily working complete all as directed for transformer of capacity 400 kva , draining out transformer oil from the transformer and storing the same in suitable containers to be arranged by contractor without any extra cost opening the top cover and lifting up the core assembly carefully to check the condition of transformer windings and core retanking the same after repairing checking of leakage from transformer body and repairing welding works required for making transformer body leak proof refilling the transformer oil dully dehydrated and filtered dehydration and filteration to be paid separately and making all connections with ht lt side bushings refixing the top cover and testing the transformer with a suitable capacity insulation tester complete all as directed for transformer of cap 400 kva , m and l for rewinding of burnt out defective ht copper coils with new super enamelled heavy duty copper winding wires of size matching to the existing one including varnishing drying in a suitable oven and all insulating material such as cotton sleeves tapes etc and connections with bushing terminals complete all as specified and directed , all as per item no 4 above but lt copper coils complete all as specified and directed , m and l for painting the transformer tank from inside with two coats of zinc chromite after preparing the tank walls bottom top cover inner side by properly cleaning the surfaces oil free complete all as directed for transformer capacity 400 kva , m and l for replacement of defective ht porcelain bushing of suitable size for transformer of cap 400 kva including washers of good quality complete all as specified and directed , m and l for replacement of defective lt porcelain bushing of suitable size for transformer of cap 400 kva including washers of good quality complete all as specified and directed , dehydration and filteration of transformer oil for indoor outdoor type transformers of any capacity at site using transformer oil filteration plant to improve di electric strength not less than 45 kv at 2 point 5 mm electrode gap complete all as directed note unit rate quoted shall be deemed to include the charges for hiring of oil filteration plant shifting to different locations at cantt area testing of samples of oil as per requirement and nothing extra will be paid on this account , s and f new transformer oil for replacement or topping up the level of oil having dielectric strength not less than 45 complete all as specified and directed
Tender For providing lane marking, painting to kerbs/dividers, zebra crossings in dammaiguda division:04, keesara circle -01, malkajgiri zone, mmc(item no.2)
Tender For supply of pu painting kit for apricoat yellow and blood red pu paints consists of 07 item 1:-epoxy zinkphosphate primer ( two pack ) to chapter ii of rdso spec. no. m&c/pcn/100/2018 amndt. 1b. qty. per kit 52 ltrs. 2:- unsaturated polyester based knifing putty colour white ( two pack ) chapter iii of rdso spec. no. m&c/pcn/100/2018 amndt. 1b.qty. per kit 40 kgs. 3:- pu surface white ( two pack ) chapter iv of rdso spec. no. m&c/pcn/100/2018 amndt. 1b.qty. per kit 34 ltrs. 4:- pu paint beige finish ( two pack ) colour shade ral 0708040 to chapter v of rdso spec. no. m&c/pcn/100/2018 amndt. 1b.qty. per kit 44 ltrs. 5:-pu paint maroon finish ( two pack ) colour shade ral 0303045 to chapter v of rdso spec. no. m&c/pcn/100/2018 amndt. 1b.qty. per kit 05 ltrs. 6:-thinner compatible with pu paint. qty. per kit 50 ltrs. 7:-thinner for epoxy paint compatible with epoxy primer & putty. qty. per kit 20 ltrs.[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted:max 8 lacs ]
Tender For corrigendum : supply of operation and maintenance of electrical and mechanical installations , job contract for operation and day to day maintenance services of airport systems equipments , execution of item of schedule of rates cpwd dsr 2022 as and when required , testing of transformer oil sample including conducting bdv test and submission of test report etc complete as required , filtration of transformer oil of 630 kva transformer , servicing and checking of lt air circuit breaker , servicing and checking of ht vacuum circuit breaker , calibration and testing of relays at ht panel , calibration and testing of following relays at lt and synchronizing panel , scrubbing, cleaning the existing surface of cubicle panel, feeder pillars and painting , lettering of maximum 2 inch size alphabetic or numerical , cleaning the surface of ms chequered plates , supply and replacement of silica gel in breather of existing 630 kva transformer etc. complete as required , lifting and lowering of 10 hp borewell submersible motor pump set , servicing and complete overhauling of 10 hp borewell submersible motor pump set , decoration of terminal building and canopy of rupsi airport , supply and replacement of defective smoke detectors , supply and replacement of defective manual call point , supply of convertor or driver suitable for philips make 20 w downlight types led luminaires or fittings , supply of convertor or driver suitable for osram make 120w types led luminaires or fittings , supply of convertor or driver suitable for havells make 18 or 20 w downlight types led luminaires or fittings , supply of convertor or driver suitable for wipro make 36w 2ftx2ft recess mounted fitting , supply of 1000w 240v lamp suitable for aerodrome beacon , supply of aerodrome beacon , calibration of clinometer , supply of reflector suitable for ama make papi , supply of 2c x 4 sq mm. secondary lead with plug , supply of b connector or four way porcelain terminal , supply of 5 kv grade 50 hz ac isolating transformer , supply of two pin halogen lamp holder suitable for 200 watt , supply of 5 w screw cap led lamp , supply of wind sock cloth , supply and replacement of led flood light , supply and replacement of obstruction light of wind direction indicator , supply and replacement of 180 ah 12 v lead acid battery , supply and replacement of 100 ah 12 v lead acid battery , supply of automaic electric hand drier , servicing, checking repairing overhauling and testing of crompton make 630 kva transformer
Tender For corrigendum : supply of one set consisting of two (o2) item for painting on vande bharat bogie description of item:- (01.) fluoropolymer (fluoroethylene) as per japanese industrial standard jis k 5659:2008 (long durable paints for steel structures) class-1 (top coat) ral: 7012/7037, qty. per set-06 litre, (02.) thinner compatible with pu paint to rdso spec. no. m&c/pcn/100/2018, qty. per set-02 litre [ warranty period: 30 months after the date of delivery ]
Tender For supply of one set consisting of two (o2) item for painting on vande bharat bogie description of item:- (01.) fluoropolymer (fluoroethylene) as per japanese industrial standard jis k 5659:2008 (long durable paints for steel structures) class-1 (top coat) ral: 7012/7037, qty. per set-06 litre, (02.) thinner compatible with pu paint to rdso spec. no. m&c/pcn/100/2018, qty. per set-02 litre [ warranty period: 30 months after the date of delivery ]
Tender For supply of head stock cpl for lhb under frame (ls,lwscn,lwscz,lwaccw,lwaccn) to drg. no. 49512001, alt "g", col.i. the firm shall fulfill the requirement as per icf/md/spec-147, issue status-01, rev-02 with amendment no.02. special condition : packing drg similar toicf/j&t/sk-1706, alt 'a' be followed. i) special care to be taken for under slung items while transit. ii) for painting system follow the drg no 53811116, alt 'e' iv) details for stage inspection. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (c) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # final product inspection. [safety item ]