Latest roadway Tenders | Government roadway Tenders

Central Government/Public Sector

CTN :45652102

15 Jul, 2026 NA

Ganjam - Odisha

Tender For repair and maint of storm water sunset sheds drains cover slabs damaged culvert retaining wall and associates at adm regt ad static wksp aps mh aadc led street fencing security light fitting roadway luminaries timer panels high mast lights and or con

corporations/Associations/Others

CTN :45630363

29 Jun, 2026 9.98 Lacs

Ahmedabad - Gujarat

Tender For road grouting work in different tp roads and breakdown site in jodhpur ward, south west zone amc.(re invite)

corporations/Associations/Others

CTN :45524776

29 Jun, 2026 3.85 Crore

Bhavnagar - Gujarat

Tender For work of metal grouting of 18 meter tp scheme no.06, road in kaliyabid sidsar adhevada ward

Central Government/Public Sector

CTN :45384289

16 Jun, 2026 15.45 Lacs

Shahdol - Madhya Pradesh

Tender For corrigendum : preparation/ heightening and widening of roadway for marching of (continuous miner) cm from panel c2 to c3 and shifting of pump for dewatering of panel in vi top (combined) seam at bangwar ug mine

CTN :45505858

25 Jun, 2026 NA

Koderma - Jharkhand

Tender For supply of pcb fabrication lab , pcb prototyping machine , safety devices on haulage road , shot hole pattern in a sinking shaft , plumbing or shaft centring arrangements for a sinking shaft , shot hole patterns , types of roof support by timber , chock with four corner props , chock release device , tapered props , side and roof support in a roadway , roof bolting , magnetic unlocker for flame safety lamp hand held type permanent magnet , tool kit for servicing and maintenance of flame safety lamp , flame proof lamp fitting for dark room of gas testing , drill rod and drill bit , air leg , lubricator , exploder dgms approved twenty five shot capacity max resistance one hunderd fifty nine ohms, one and half a firing current, non volt battery, dc output five hunderd volt , scraper cum brake detector , stemming rod , metric chain size twenty meter , metric chain size thirty meter , engineering chain , revenue chain , gunter chain , steel tape fifteen meter , steel tape thirty meter , metallic tape,

CTN :45471926

16 Jun, 2026 NA

Ajmer - Rajasthan

Tender For supply of led luminaire for floodlight conforming to is 10322 (part 5/section 5) (v3) (under bis scheme - ii) (q2) , led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2) , non modular piano type domestic fan regulator conforming to is 11037 (q3) , non modular piano type domestic electrical sockets isi marked to is 1293 (q2) , elecric bells and accessories as per is 2268 (q3) , non modular piano type domestic electrical switches isi marked to is 3854 (q2) , led tube light batten light 20 watt oblique 18 watt , all in one solar s oblique l 12 w 30 wp spv module 12.8 v 14 ah , led bulb 9 watt oblique 7watt , led garden light 40 oblique 45 w , bulk head light 10 w , led batten 9 oblique 10 watt , led street light 35 w pressure die-cast aluminium ip66 roadway luminaire , heating element round oblique triangular base type 2 kw

CTN :45403256

15 Jun, 2026 5.10 Lacs

Bardhaman - West Bengal

Tender For white washing for better illumination along travelling roadway in rvii and rviia seam at 3 and 4 unit under jpc

State Government

CTN :45382897

08 Jun, 2026 13.48 Lacs

Faridabad - Haryana

Tender For dnit name : repairing of plaster work and providing and laying vitrified floor tiles, water proofing, floor mounted, pcc, flush door shutters, paint work, sanitary work in house no.1413, 1414, 1415 and 146 in sector-15 faridabad and all other works contingent thereto. chargeable head - annual maintenance of hsvp staff quarters in sector-15 and 15a, faridabad for the year 2026-27. - [10.1]providing and laying of base course of floors consisting of 100 mm thick cement 1:8:16 and 100 mm sand or stone filling., [10.109]providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of engineer-in-charge., [10.67.1]providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to i.s. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete. 1. size of tile 500x500 mm, [11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand), [11.6.2]15 mm cement plaster on the rough side of single or half brick wall of mix : 2. 1:6 (1 cement: 6 fine sand), [11.64.1]distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1. new work (two or more coats) over and including water thinnable priming coat with cement primer, [11.96.1]finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: 1. new work (two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), [12.157.1.2]providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge. (glazing, panelling and dash fasteners to be paid for separately) : 1.2. for fixed portion powder coated aluminium (minimum thickness of powder coating 50 micron), [12.159.2]providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item): 2. with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm), [13.29.1]steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 1. in stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete, [13.44]providing and fixing circular/ hexagonal cast iron or m.s. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick m.s. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ m.s. sheet box by means of

Central Government/Public Sector

CTN :45331532

06 Jun, 2026 NA

Nowrozabad - Madhya Pradesh

Tender For providing of handling ,transport and other mining services - percentage quote based - white washing and stone dusting of belt roadways transport roadway haulage roadways and pumping station 29l 12de sump of cm 4a panel at vindhya ug mine pinoura sub area of area ..