Latest rock dust Tenders | Government rock dust Tenders

Central Government/Public Sector

CTN :45291377

12 Jun, 2026 45.84 Lacs

Cuddapah - Andhra Pradesh

Tender For supply of earth work in excavation , filling available excavated earth excluding rock , demolishing rcc work , providing and laying in position cement concrete , providing and laying in position specified grade of reinforced cement concrete , supplying and filling in plinth with sand under floors , steel reinforcement for rcc work , centering and shuttering including strutting lif in foundations footings bases of columns , centering and shuttering including strutting lif columns pillars piers abutments posts and struts , dry stone pitching 22 point 5 cm thick , neat cement punning , demolishing brick work , brick work with non modular fly ash bricks , finishing walls with textured exterior paint , finishing walls with 100 percentage premium acrylic emulsion paint , 15 mm cement plaster , random rubble masonry with hard stone , structural steel work riveted bolted or welded in built up , surface dressing of the ground including removing vegetation , removing white or colour wash by scrapping , providing and fixing glass panes with putty and glazing clips in steel doors , providing and fixing glazing in aluminium door window ventilator shutters , providing and fixing aluminium work for doors windows ventilators , providing and fixing gi chain link fabric fencing , providing and fixing ist quality ceramic glazed wall floor tiles , grading roof for water proofing treatment with cement concrete , repair to plaster of thickness 12mm to 20 mm in patche , providing and laying water proofing treatment on roofs of slabs , 0 mm thick factory made polyvinyl chloride pvc door shutter , providing and fixing factory made panel pvc door shutter consisting of frame , providing and fixing on wall face unplasticised rigid pvc rain water pipes , providing mixing and applying sbr polymer , providing and injecting approved grout 2 percentage of weight of cement used modified cement slurry made with non shrink compound in concrete rcc work , providing and injecting approved grout cement slurry made with shrinkage compensating cement in concrete rcc work , providing and injecting approved grout epoxy injection grout in concrete rcc work of approved make , providing laying spreading and compacting graded stone aggregate

corporations/Associations/Others

CTN :45034145

27 May, 2026 43.16 Lacs

Jhansi - Uttar Pradesh

Tender For corrigendum : providing of construction of drain for 2x210 mw ash water recirculation system at ptpp, parichha. - engaging jcb on hire bases including hire fuel driver helper etc. complete. , clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. , demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of material within 50 metres lead as per direction of engineer-in-charge in lime mortar , earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. , filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. , providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - all work up to plinth level : 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) , "centering and shuttering including strutting, propping etc. and removal of form for : suspended floors, roofs, landings, balconies and access platform" , steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.thermo-mechanically treated bars , random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : cement mortar 1:6 (1 cement : 6 coarse sand) , brick work with fly ash (non modular) bricks of class designation 7.5 in foundation and plinth incement mortar 1:6 (1 cement : 6 coarse sand) , 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) , supplying and filling in plinth with jamuna sand under floors, including watering, ramming, consolidating and dressing complete. , "hire charges of pump set of capacity 4000 litres/hour for dewatering which include cost of services of operating staff, cost of lubricating oil, diesel / petrol/ kerosene oil , other consumables for running the plant and machinery. the hire charges of plant machinery on per day basis are for single shift of eight working hours." , providing and laying non pressure np-4 class (heavy duty) r.c.c. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 900 mm dia rcc pipes.

CTN :45205719

27 May, 2026 12.00 Lacs

Krishnagiri - Tamil Nadu

Tender For earth work excavation in hard rock measured in solid including blasting and stacking for foundation of columns in new bus stand vaniyambadi road ward no. 9, sf.no.495 in bargur town panchayat

State Government

CTN :45228153

03 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of rubber molded goods - moulded rubber goods, neoprene rubber square suitable to stand temp.200 c for juice heater size 5/8 x 5/8 , rubber square suitable to stand temp.200 c for v. line juice heater size 1/2" x 1/2", nitrile rubber seat for angle valve of juice heater suitable to stand temp.200 c, as per drg no. ksc/bh/296/02, nitrile rubber seat for double beat valve of juice heater size 240mm od x 94mm bore x 18 mm thick, neoprene rubber taper plug for evaporator tubesize: 37mm x 40mm as per drg.no. ksc/286/02, nitrile rubber seat for vapour angle valve (inlet of 4th evaporator body) suitable to stand at 200 c temp. as per drg.no.ksc/evp/97/2001 fig no.1, nitrile rubber seat for main exhaust valve of semi kestner as per our drawing no. ksc/bh/7898 fig. no. 1, nitrile rubber seat for surplus exhaust angle valve of semi kestner suitable to stand at 280 c as per drg. no.ksc/bh/7899 fig no. 3, nitrile rubber seat for outlet vapur valve of s.k. suitable to stand at 280 c as per drg. no. ksc/bh/7899 fig.-1, nitrile rubber seat for angle valve (inlet exhaust valve of v.cell) suitable to stand at 280 c as per drg. no. ksc/bh/8607 fig.-1, nitrile rubber seat for pan exhaust valve to stand at 260 c as per drg.no.ksc/bh/7899 fig no. 2, nitrile rubber seat for exhaust/vapour angle valve for pan no. 1, 3, 8 & 10 as per dr g. no. ksc/boil/221, fig. no. 1, fig. no. 2, fig. no. 3, fig. no. 4, nitrile rubber seat for discharge valve of pan no. 6 & 7 as per drg. no.ksc/8608, nitrile rubber seat for discharge valve of pan no. 9 & 10 as per drg. no.ksc/8609, nitrile rubber seat for discharge valve of pan no. 8 as per drg. no.ksc/1022, synthetic rubber joint for main hole of pan 3, 4 & 5 size 517 od x 443 bore x 13 thick., synthetic rubber joint for main hole of pan 1, 2, 3,6, 7, 8, 9 & 10 size 26" od 12" bore 6 mm thick, synthetic rubber joint for pan condenser main hole (a) size 22"od, 12"bore, 6mm thick,, (b) 28"od,12"bore, 6mm thick, synthetic rubber joint for evaporator man hole od 19.11/16 bore 18. 7/16 & 5/8" thick, nitrile rubber seat for double beat valve of juice heatersize 240 mm od x 94 mm bore x 21 mm thick, nitrile rubber seat for double beat valve of juice heatersize 230 mm od x 94 mm bore x 21 mm thick, synthetic rubber ring suitable to stand at 150 ctemp. & 200 psi dia(inch.) bore(inch) thickness(mm), 22 12 6, 24 12 6, 26 12 6, 28 12 6, 30 12 6, 36 18 6, 48 40 6, 54 46 6, synthetic rubber ring joint suitable to stand at 150 c temp. and 200 psi for sight glasses of pan & evaporator dia(mm.) bore(mm) thickness(mm), 230 180 6, 220 180 6, 210 165 2, 222 195 2, 218 190 2, 170 130 6, 150 110 6, neoprene rubber star for cane un-loader as per drg.no.ksc/cr/311286 size : 6", neoprene rubber star for cane un-loader as per drg.no.ksc/cr/17982 size : 9", rubber bushes, o.d.(inch) bore(inch) length(inch), 5/8 1, 7/8 1, 1 1, 1.1/4 1/2 1.1/2, 1.1/4 5/8 1, 1.1/4 1.1/4, 1.1/4 7/8 2, 1.1/2 1.1/4, 1.1/2 1.1/2, 1.1/2 7/8 1.3/4, 2 2, 2 7/8 2, 2 1 2, 2 1.1/2 7/8, 1 1/2" 3/4" 2", 2.1/2 1.1/4 2.1/2, 1 1/2 1, 1 1/2 1 1/4, 1 1/4 5/8 1 1/2, 1 1/4 3/4 1 1/2, 1 1/4 1/2 1 1/4, 1 1/2 3/4 2, 1/2 3/4 2, 1/2 5/8 1 1/2, spares for t.e.w. make type 36 dia juice clarifier, mud sealing ring as per sample/ drg., telescopic valve rubber ring as per sample/ drg., mud scraping rubber strip with wire netting size 32" x 5" x ", rubber seat for molasses weighing scale size- 14 dia, thickness- 16mm type ( silicon bitile rock hard rubber ), (a) rubber seat for water weighing scale (as per drawing ), (b) rubber seat for juice weighing scale (as per drawing ), neoprene rubber stoper(hard quality) for juice weighing scale 70/62 dia, 55 mm lenth as per drawing no-ksc/jk1/144, neopreme rubber seat for exhaust valve suitable for 200 0 c temerature as per drawing no : ksc/bh/1021, serial no 1 , od 510, id 365 mmthickness 40/15 mm, serial no 2 , od 555, id 380 mmthickness 40/15 mm, serial no 3 , od 655, id 480 mmthickness 40/15 mm, serial no

Central Government / Public Sector

CTN :45137645

30 May, 2026 1.88 Lacs

Hyderabad-T - Telangana

Tender For supply of ms gate for boundary wall towards tngo colony at niab : : - demolishing , dismantling , earth work all kinds of soil , earth work hard rock , pcc work 1 , pcc work 2 , centering and shuttering , rcc work , steel work , plastering , putty , exterior paint , enamel paint , jcb , vibratory roller , miscellaneous works

State Government

CTN :45164609

20 May, 2026 2.28 Lacs

Kottayam - Kerala

Tender For general vazhoor press well deepening of existing well by blasting hard rock- general civil work

CTN :45050668

21 May, 2026 NA

Multi City - Multi State

Tender For concrete for foundation and plinth other than hard & rock soil for project executed by konkan railway corporation limited.

CTN :45050698

21 May, 2026 NA

Multi City - Multi State

Tender For concrete for foundation and plinth other than hard & rock soil for project being executed by konkan railway corporation limited.

CTN :44907330

02 May, 2026 46.75 Lacs

Channagiri - Karnataka

Tender For excavation of elephant proof trench of size 3.0 mtr top width 3.0, mtr depth, and 1.5 mtr. bottom width in hard rock , soft rock and maintenance of ept

Central Government/Public Sector

CTN :44870925

04 May, 2026 44.14 Lacs

Delhi - Delhi

Tender For corrigendum : addn / altn to building no. p-24 at domestic area in mcc, addn/ altn to sncos living in accn, addn /altn to certain toilets in rock view area and provn of hard stand platform grouting at af stn palam under ge (af) palam, delhi cantt - 10

Rock Dust Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

State Government

Central Government / Public Sector

State Government

Central Government/Public Sector