Get complete information related to latest Rock Wool Insulation Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Rock Wool Insulation Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Rock Wool Insulation Tenders.
Tender For application of rockwoolinsulation with sheet on boiler ducts and steam/ water pipe lines of unit no. 1 & 2 of 210 mw, bhel boiler of ph-i, korba west.
Tender For work of construction of a new 11 kv feeder for bifurcation of overloaded 11 kv chakarpur feeder under edd khatima in capital s.i. head, including supply of decentralized materials, as per tender specification. - annexure-a (supply of following material as per upcl norms.), bracing clamp for sp-55 with nut and bolt., pp & clamp with nut and bolt st pole sp-55., stay clamp for sp-55 with nut and bolt., pp & clamp with n&b st pole sp-72., pp & clamp with n&b pcc pole, 8.5 mtr., stay clamp for pcc pole., ht stay insulator., 33 kv suspension ties on every pin insutlator., ipc with aluminium bail for earthing., 11 kv ipc for covered to covered cond., 11 kv ipc for covered to bare conductor., 11 kv mid span jointing kit., 11 kv aaac covered cond. al-59, 99 sq.mm., 11 kv tension clamp with bail & ipc., annexure-b (following work as per upcl norms), chemical earthing., fabrication of steel., excavation of pit for stay set., erection of 11 kv stay set,, grouting of stay set., excavation of pit for pole., erection of single pcc pole., erectin of single sp-55 pole., erection of single sp-72 pole., erection of pcc double pole., erection of sp-55 double pole., grouting of pole., muffing of pole., painting of sp-55 pole., lopping and choppong of tree branchases., cartage of pcc pole, 51-70 k, cartage of sp-55 pole, 51-70 km., cartage of sp-72 pole, 51-70 km., cartage of petty material, 51-70 km., headload cartage of pcc pole, 0-1 km., headload cartage of sp-55 pole, 0-1 km., headload cartage o sp-72 pole, 0-1 km., headload cartage of material, 0-1 km., fixing of 33 kv suspension ties., fixing of ipc with al, bail for earting., jumpering of d/p tpmo, fuse set and t/f., jumper section pole., fixing of 11 kv 90 kn tension clamp b&ipc., fixing of 11 kv ipc for cc to cc cond., fixing of 11 kv ipc for cc to bare cond., fixing of 11 kv mid span jointing kit., laying spreading, stringing aac conductor
Tender For ghrssidc/e-t/2026-27/646 - electrical fabrication - a, la cross arm clamp for 7.5 mt rcc pole (gal v) - cee/e/523, sa cross arm clamp for 7.5 mt rcc pole (gal v) - gec/e/523, la cross arm clamp for 9 mt rcc pole (gal v) - gec/e/524, sa cross arm clamp for 9 mt rcc pole (gal v) - gec/e/524, la cross arm clamp for 105 lbs/yd rail pole (gal) - gec/e/723, sa cross arm clamp for 105 lbs/yd rail pole (gal) - gec/e/723, la cross arm clamp for 60 lbs/yd rail pole (gal) - cee/e/486, sa cross arm clamp for 60 lbs/yd rail pole (gal) - cee/e/486, la cross arm clamp for 90 lbs/yd rail pole (gal) - cee/e/515, sa cross arm clamp for 90 lbs/yd rail pole (gal) - cee/e/515, la stay clamp for 60 lbs/yd rail pole (gal) - cee/e/469, sa stay clamp for 60 lbs/yd rail pole (gal) - cee e 469, la stay clamp for 90 lbs/yd rail pole (gal) - cee/e/508, sa stay clamp for 90 lbs/yd rail pole (gal) - cee/e/508, la stay clamp for 7.5 mtrs rcc pole galvanised - cee e 523, sa stay clamp for 7.5 mtrs rcc pole galvanised - cee e 523, la stay clamp for 105 lbs/yd rail pole (gal) - cee e 723, sa stay clamp for 105 lbs/yd rail pole (gal) - cee e 723, la stay clamp for 9 mtrs rcc pole (gal v) - cee e 524, sa stay clamp for 9 mtrs rcc pole (gal v) - cee e 524, 11 kv v shaped cross arm (gal v) - cee e 408, 33 kv v shaped cross arm (gal v) - cee e 408, b type modified distribution box - cee e 386, a type street light meter box with clamps - cee e 386, stay set for 11 kv lt line - cee e 500, stay set for 33 kv line - cee e 500, turn buckle& eye bolt for 33 kv line - cee e 513, turn buckle& eye bolt for 11 kv line -cee e 466, cast iron packing piece 90 lb for rail pole - cee e 514, top insulators fitting for rcc pole - cee e 506, 4 pin angle type cross arm - cee e 702, 4 pin channel type cross arm - cee e703, 2 pin angle type cross arm - cee e704, 2 pin channel type cross arm - cee e 705, earthing pipe - cee e 467, sa cross arm clamp for ht/lt line on 11 mt rcc pole made of 50 x 10 flat (g) - cee e 711, la cross arm clamp for ht/lt line on 11 mt rcc pole made of 50 x 10 flat (g) - cee e 711, sa stay clamp for ht/lt line on 11 mt rcc pole made of 50 x 10 flat (g) - cee e 711, la stay clamp for ht/lt line on 11 mt rcc pole made of 50 x 10 flat (g) - cee e 711, sa bottom clamps for fixing street light fixtures for 7.5/9mtrs rcc pole galvanised 25 mm pipe - cee e 12, sa top bottom clamps for fixing street light fixtures for 7.5 mts rcc pole galvanised 25 mm pipe - cee e 12, la top clamps for fixing street light fixtures for 7.5/9 mts rcc pole (gal v) 40 mm pipe - cee e 612a, sa top clamps for fixing street light fixtures for 7.5 rcc pole - cee e 612a, gi nut and bolts in various sizes electro galvanised, gi pins for lt pin insulator, gi pins for 11kv pin insulator, gi pins for 33kv pin insulator, gi bent pipe of nominal base 25 mm, 1 mts long for tube light fixture - cee/e 618, gi bent pipe of nominal base 25 mm, 1.5 mts long for hpsv lamps - cee/e 593a, b type modified distribution box with mccb and kit kat fuses as per cees specifications / drawings, metal parts for shackle insulators as per cees specifications, gi bent pipe of nominal base bar 40mm x 3 mts long (medium class) the pipe shaft should conform to is : 1239 (part i) 1973 as amended upto date - ee/ii/21/2009, hot dip galvanised earthing strips of size 30x160x5mm, hot dip galvanised earthing strips of size 100 x 360 x 3mm, g.i bent pipe nominal bore 40 mm ce/e xi for hpsv lamps - cee/e 593a, metal parts for disc insulator as per department 4 bolted. as per department specification & drawing - 60/4/va/cee/tech/2019-20/1282, metal parts for disc insulator 3 bolted - 60/4/va/cee/tech/2019-20/1282, kit kat fuse 100 amps, kit kat fuse 200 amps, kit kat fuses 300 amps, kit kat fuse 400 amps, tinned copper fuse wire of various sizes, aluminium crimping lugs 25 sq.mm, aluminium crimping lugs 35 sq.mm, aluminium crimping lugs 50 sq.mm, aluminium crimping lugs 70 sq.mm, aluminium crimping lugs 95 sq.mm, aluminiu
Tender For supply of 4500 sets of stay set complete - supply of silicagel blue, 0.6kva ups, stay set complete( quote price for single unit only), silicagel blue 10 to 12mm, pole pit for 9.0m and 9.14 m psc/rcc / all metal poles (each pit) 1.25 x 0.6 x 1.83 mtr, ordinary soil, semi rocky soil, heavy rocky soil where blasting/ cheseling required [specific approval should be obtained from concerned ee], stay pit, in ordinary soil [0.95 x 0.6 x 1.2m], semi rocky soil, stay pit in heavy rocky soil where blasting/ cheseling reqiured [specific approval should be obtained from concerned ee], erection of poles & stays (including refilling of excavated earth), erection of 7.5m / 8.0m poles [rcc / psc], erection of 9.00m / 9.14m rcc / psc/rail pole, tubular pole and all metal poles, stay set, erection stay set complete, stay erection without rod and pit, replacement of stay rod only. (including stay pit excavation & refilling & erection), replacement of guy shackle only in existing stay, erection of line materials, fixing of lt 1 ph "x" arm, fixing of lt/ht ti fitting, fixing of lt 3 ph "x" arm, fixing of 3[1/2] v ` x arm, fixing of 4[1/2] v ` x arm, fixing of 5 v x arm, fixing of tapping channel / guarding "x" arm, providing of line spacers in lt lines 1 phase, providing of line spacers in lt lines 3 phase, erection of ab switch with pt insulator & jumpering complete, erection of centre rotating switch ab switch complete, fixing of ht pin insulator / strain disc, 11 kv pin insulator with pin, 11 kv strain disc / polymer disc with hardware, 22 kv pin insulator with pin, 22 kv strain disc / polymer disc with hardware, 33 kv pin insulator with pin, 33 kv pin strain disc/polymer disc with hardware, fixing of lt pin insulator with pin, lt shakle with hardware, fixing of aluminium knob, paving stringing and sagging of conductor including binding of pin and proper tight [including transport of condutor from road side to work spot] per run, upto 7/2.59 mm acsr, 7/2.50 aaac including pvc cable upto 25 sqmm, acsr 7/3.35mm & 7/ 3.15 aaac including pvc cable above 25 sqmm, acsr 7/4.09 mm, above 7/4.09 mm acsr & dog conductor, earthing wiring and connection including transporting of earth pipe and excavation of pit], transformer structure earthing 10ft depth - 3 nos of pipe through tubes, dp earthing including all works [double side earthing], erection of 4th earth pipe including earthing, earthing of poles, earth pit masonary work 3 nos earth pits or using 3 nos concrete tub., replacement of detoriated earth pipe per location, concreting with mixture 1:3:6 [including all materials]., mass concreting for centre support for 2 feet including all materials, mass concreting for pole0.6x0.6x1.25m.with coping, sleeve concreting for pole 0.6 m x 0.6m x 0.3 m with coping, sleeve concreting for stay set 0.3 m & 0.75 long, erection of distribution transformer structure complete, excavation of structure pole pits 0.9 x 0.9 x 1.83 mtr, transporting of pole to pit location 2 nos., erection of poles 2 nos, excavation of stay pit 4 nos, erection of stay set (4 sets), mass concreting (cement:sand:jelly supplied by the contractor) 2 nos., erection of 22 kv ab switch, ttransformer structure earthing 10ft depth - 3 nos of pipe through earth tubes, erection of top channel, bed channel [2 nos channel] erection, cross with stud for bed channel erection, erection of belting angle / hg fuse angle, erection of hg fuse set, erection of ht las with jumpering and earthing, erection of lt las with jumbering and earthing, erection of jumpering [ht side], transformer wiring in lt side including jumpering bus bar etc., erection lt open type fuse unit arrangement single, erection lt open type fuse unit arrangement double, painting of stru. complete excluding dt [two coat of red oxide] all metal parts(excluding cost of paint)., painting of stru. complete excluding dt [one coat alu paint, excluding cost of paint), colour washing of 2 numbers structure pole [excluding
Tender For auction sale of cable cut pieces (2 core 4 and 6 sqmm ),cable cut pieces (3 core 120/95 and 50 sqmm ),cable cut pieces (1core 120/95/50 sqmm ),cable cut pieces (1core 25qmm ),scrap;printer,scrap; from water filter aquaguard,camera,scrap; air cooler,scrap steel almirah,scrap; battery (various size),air blower electric,paint , thinner and red oxide,smc box 1 phase,scrap; various type of cable cut pices,stay guy insulator lt and ht,safety helmet/safety belt
Tender For work contract for supply, erection & repairing of damaged rockwoolinsulation and aluminium sheet of fluidizing blower pipe line (esp & silo) of ahp 2x500 mw, abvtps, cspgcl, janjgir-champa.
Tender For auction sale of ms container 20 ft,scrap; air conditioner - split and window,scrap; refridgerator,scrap;television,scrap;printer,scrap; washing machine,scrap; from water filter aquaguard,camera,scrap; invertr,scrap; air cooler,scrap; ceiling fans /wall mounted fans,scrap steel almirah,scrap; furniture; wooden cot, etc,scrap; battery (various size),air blower electric,clamp meter,digital multimeter; meggar,tmt/ ct prof/tripot/ chair/pipe,tool box,stay set,acsr rabbit conductor,paint , thinner and red oxide,cable cut pieces,triple pole mechanically operated,drop out fuse,lt db box 25,lt db box 63,smc box 1 phase,smc box 3 phase,smc box 10 kva phase,smc box 16 kva phase,gi pipe,scrap; various type of cable cut pices,stay guy insulator lt and ht,safety helmet/safety belt,discharge rod,suspension clamp/dead end clamp, etc,cable
Tender For auction sale of scrap; fabricated structure; gi;,aluminium binding wire 6 swg,lt db box 25,lt db box 63,smc box 1 phase,smc box 3 phase,smc box 10 kva phase,smc box 16 kva phase,hdpe pipe,gi pipe,scrap; various type of cable cut pices/ 3cx120/95 and 50,stay guy insulator lt and ht,stay set -7/8 and 7/10 / gi wire swg-6/8/16,safety helmet/safety belt,discharge rod,suspension clamp/dead end clamp, etc,ss strap/ss buckle/suspension with clamp and dead end assembly for ab cables,eye hook and eye bolt,cable,scrap; various type of cable cut pices/ 1cx25/50/95,120 sqmm
Tender For corrigendum : supply of 11 mtr long 150 x150 gi pole , 11 kv pin insulator , 11 kv hw fitting 45 kn , 11 kv v cross arm , 11 kv disc insulator 45 kn polymer , 11 kv 1 core 100 sqmm xlpe conductor , 100x50x6 gi ms chanel , 75x40x6 gi ms chanel , 50x50x6 gi ms angle , pg clamp for 100 smm2 conductor , lightning arrester 12 kv,10ka , road crossing guarding , 3.5 c x 95 smm xlpe insulated , 63 kva transformer , lt db box with mccb and kitkat fuse 63 kva , ab switch 11 kv,200 a 3 pole,50hz , h.g fuse 11 kv,200 a 3 pole with pl , gi pipe earthing 3 mtr long , hdpe pipe 8 inch 10 mtr , 25 x 6 mm gi flat , 50 x6 gi flat , earthing material , earthing of support , danger plate , anti climbing device of gi barbed wire , gi nut,bolt and washer of , all cable lugs , 10 core 2.5 sqmm cu control cable armoured , fish plate , ht stay set complete , ht stay insulator , 7 per 10 swg stay wire 10kg per stay , ht stay clamp , black yellow paint
Tender For sale of pole scrap damaged/scrap a type pole , damaged/scrap lt rcc pole , damaged/scrap ht rcc pole , damaged/scrap ht psc pole , damaged lt psc pole , damaged/scrap ht rs joist pole , pole damaged/scrap 10m rail , damaged/scrap 8m rail pole , damaged/scrap ht tw pole , damaged/scrap lt tw pole , damaged/scrap ab switch , damaged/scrap fuse unit , damaged/scrap fuse drop out 11kv , damaged /scrap lightning arrestor , damaged/scrap ht pin insulator , damaged/scrap lt pin insulator 415v set (with pin) , damaged/scrap shackle insulator , damaged/scrap lt stay insulator , insulator scrap , scrap pole top bracket- f type gi-11kv , scrap silica gel breather for distribution traansformer 250g , damaged street light controller automatic