Latest rod brush Tenders | Government rod brush Tenders

Central Government And Public Sector

CTN :43462443

27 Jan, 2026 45.19 Lacs

Muzaffarnagar - Uttar Pradesh

Tender For supply of material and job work under special repair to restoration and conservation of tomb of saiyed saif khan and his mother majhera muzaffarnagar 2025 2026 - items to be executed, unslaked lime, surkhi, c. sand, gur, belgiri, gum, brick aggregate 20-25 mm, 2nd class brick, kakkar stone, white marble, 65mm thick red sand stone 10 sqm, grey/white sand stone, rr stone, 65mm thick red sand stone 10 sqm (for arch), lakhori brick, tile bricks, mud including top finish, kail wood sleeper, raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of engineer-in-charge., ruled/ flush pointing on white sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {one lime : 1.5 surkhi (15% dark red and 85% light yellow surkhi) : 1/2 marble dust}. (the rate is inclusive of all materials & labours involved except scaffolding)., demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of engineerin- charge., providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of engineer-in-charge. note:- (1) the elevational area of the scaffolding shall be measured for payment purpose. (2) the payment will be made once only for execution of all items for such works., "earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 all kinds of soil.", surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. 2.28.1 all kinds of soil, "demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. nominal concrete 1:4:8 or leaner mix (including equivalent design mix)", provision for providing & making lime slacking & mortar pit by means of pit excavation, brick masonry & plastering over it. the size of the over all pit is 8.00m x 3.00m & depth is 1.00m. the pit is divided in to three parts & cement plastere, provision for removal of malba for cleaning the sites including collecting, staking and disposal of the rubbish /malba upto 100 meter lead including all the labour and transportation etc complete. out of the monuments premises and further, provision for the purchasing of essential article and t & p for the proper execution of the work i) pvc sheet, ii) pvc pan (tasla), iii) hammer with handle 1kg, iv) iron chisel 4",6", 8", v) pvc bucket, vi) pvc mug, vii)wire & coir brush, viii) wire & coir brush, ix) gum boot pvc in pair, x) pvc pipe 1", xi) wooden handle (fawra, hammer), xii) first aid box with medicine, provision for drawing and documentation charges including inspection of exis

Central Government/Public Sector

CTN :43486933

28 Jan, 2026 NA

Kurukshetra - Haryana

Tender For supply of wooden screw , aluminum door stopper twin type , ms bow handle 6 inch oxidized , anti termite or termi guard packing of 5 ltr , helical door spring , cp towel rail of size 600 x 20mm , nails 1 inch 17 number , nails 1 and half inch 17 number , nails 4 inch 10 number , universal hydraulic door closer , glass putty , painting brush 5 inch long hair , cp glass self , acrylic distemper white , commercial ply , sdst screw black patta , tile cutter blade 4 inch , tile cutter blade 5 inch , iron cutting wheels or blades xtra power , sdst screw with epdm seal , ms fastener , wire brush , nc thinner , lakh dana , filling powder yellow , filling powder brown , filling powder red , touch wood , wood filler , color stainer , sealer , malmal cloth , hss drill bit , hammer drill bit 6 x 110 mm , hammer drill bit 8 x 110 mm , hammer drill bit 10 x 110 mm , hammer drill bit 10 x 160 mm , hammer drill bit 12 x 110 mm , hammer drill bit 12 x 160 mm , hammer drill bit 14 x 160 mm , hammer drill bit 14 x 210 mm , hammer drill bit 16 x 160 mm , hammer drill bit 16 x 310 mm , hammer drill bit 18 x 160 mm , hammer drill bit 18 x 210 mm , hammer drill bit 20 x 160 mm , hammer drill bit 20 x 310 mm ) /bid number: gem/2026/b/7083846 * /dated: 07-01-2026 & & / bid document1 / 51

Central Government/Public Sector

CTN :43480398

19 Jan, 2026 NA

Kapurthala - Punjab

Tender For supply of stainless steel wire brush with wooden or plastic handle. approx. dimensions - 1

Central Government/Public Sector

CTN :43480377

13 Jan, 2026 NA

Chennai - Tamil Nadu

Tender For supply of wire cup brush for angle grinders with c

Central Government/Public Sector

CTN :43280372

10 Jan, 2026 1.40 Lacs

Jamnagar - Gujarat

Tender For bid to ras supply of jubilee clip 1 inch , brush scrubbing large , 9v battery , cloth emery 11 inch x 9 inch 279mmx229mm , cloth emery b5 871 61 grade 1 , clip jubilee 0. 75 inch , cable tie 8 inch nylon , 2 core cable 6a , clip jubilee 4 inch , linseed oil boiled , cleaning bar for utenshil 500gms , paint roller refill 9 inch , oil and grease remover , heat resistance gloves for galley , grease lg 200 , lip seal for fire hydrant , solder lead , rubberise gloves , turpentine oil solvent , face mask , fluorescent tape yellow 4 inch , white spirit , ear seal for protector plug 3 m , thinner , rj 45 cable , wire connection lugs , rj 45 connection , call boat swains , tapes measuring 15 mtrs , google safety , instant glue , paint roller refill 4 inch

corporations/Associations/Others

CTN :43502529

23 Jan, 2026 NA

Sonbhadra - Uttar Pradesh

Tender For supply of replacement of heating element.when the elements strips are to be dismantled and cleaned with wire brush. , servicing and minor repairing of flue gas primary air and secondary air inlet, outlet and inter connecting dampers of aph. flue gas dampers. , servicing and minor repairing of flue gas primary air and secondary air inlet, outlet and inter connecting dampers of aph.primary air damper , servicing and minor repairing of flue gas primary air and secondary air inlet, outlet and inter connecting dampers of aph.secondary air damper , servicing of flue gas primary air and secondary air inlet, outlet and inter connecting dampers of aph flue gas dampers. , servicing of flue gas primary air and secondary air inlet, outlet and inter connecting dampers of aph primary air damper , servicing of flue gas primary air and secondary air inlet, outlet and inter connecting dampers of aph secondary air damper , repairing of flue gas, sa, pa inlet and outlet duct manholes cover. , repairing flue gas dampers flaps. , repairing of pa damper flaps. , repairing of sa damper flaps. , repairing of semi circular baffle. , repairing of distance pieces in fg duct. , repairing expansion joints before and after air pre heater. , cleaning of cooling water line of lubricating oil pumps of aph by cutting and welding. , repairing of hangers of sector plate. , decoupling and re-coupling of electrical motor for replacement of electric plate and fluid coupling etc. , fabrication of bracket 1 set equal to one no. in board and one no. in outboard bracket. , replacement of brackets. , leveling of rotor. , water washing and cleaning of flue gas duct sa duct. , providing sealing cover on expansion joints. , repairing of t-bars. , replacement and repairing of fg duct by cutting and welding. , adjustment of axial seal plate. , complete replacement of the static seal of aph , re- visioning or repairing of air seal housing of guide bearing of aph. , alignment of electric motor and air motor with reduction gear box of air pre-heater. , replacement of gear box of air pre heater. , cleaning of water washing nozzle, elbow and socket. , repairing of oil or water valve lube oil system of size 25mm. to 40mm. , replacement of oil or water valve lube oil system of size 25mm. to 40mm. , servicing or overhauling of over running clutch system of aph. , checking of gear box of aph. , cleaning or servicing of support bearing and their housing. , repairing and reconditioning of centre section surface beneath guide bearing and casting the refractory. , leveling of sector plates of hot end or cold end. , replacement or reversal of he ie ce basket aph. , hot washing of air pre heater. , cleaning of air pre heater through nozzle. , round the clock checking and routine maintenance of air pre heaters of unit no 12 and 13 btps, obra , round the clock checking and routine maintenance of air pre heaters of unit no 9,10,11 btps, obra

Central Government/Public Sector

CTN :43484701

28 Jan, 2026 NA

Bangalore - Karnataka

Tender For supply of glycol refractometer , profile projector , tds meter , ph meter , conductivity meter , magnifying lens , ultrasonic thickness gauge , rotary wire brush machine , belt grinding machine

Central Government And Public Sector

CTN :43487740

29 Jan, 2026 NA

Angul - Odisha

Tender For supply of wire brush scraper for conveyor of alumina handling system : : - material code -23750200360 -cylindrical brush 200 mm dia x 1500 mm , material code -23750201480 -scrapper wire brush , material code -23750201620 - scrapper wire brush , material code -00000000001 - dummy please do not quote this item , material code 00000000002 - dummy - please do not quote this item

Central Government And Public Sector

CTN :43404964

14 Jan, 2026 NA

Raipur - Chhattisgarh

Tender For corrigendum : supply of stainless steel wire brush

CTN :43502397

19 Jan, 2026 NA

Patti - Punjab

Tender For supply of havells , desert cooler water pump make isi , sand bags 18 inch x 34 inch hdpe as per isi mark , ceiling rose make anchor or siemens or l and t , insulation tape 15 mm make steel grip or faxell , service cable 10sqmm 2 core make kei or finolex or havells , angle holder make bajaj or phillips or cg , desert cooler condencer make isi , wall mounting fan make bajaj or usha or orient , plywood 3 feet x 6 feet make kitply or green ply or duroply , ceiling fan condenser make isi , wastage pipe make cera or parryware or hindware , water dispenser 230 v 500 watts make voltas or lg or usha , nails 1 inch isi , distemper paint make asian or nerolac or berger or superlac , wood primer make asian or nerolac or berger , 2 feet x2 feet led light ceiling make bajaj or phillips or cg , voltas water dispenser long body with refrigator make voltas or lg or usha , trippled layerd syntax water tank 2000 ltrs capacity with lid make syntex or j s polyplast or polycorn , wire mesh 3 feet x 4 feet , flush door wooden 3.5 x 7 feet make greenply or duro ply or kitply , curtain rod 5 feet long make isi mark , paint green make nerolac or asian , paint white make nerolac or asian , paint black make nerolac or asian , trippled layerd syntax water tank 1000 ltrs capacity with lid make syntex or j s polyplast or polycorn , change over switch 100 amp 4 pole make havells or standard or l and t , service cable 6 sqmm 2 core make kei or finolex or havells , switch board double socket make greaves or anchor or l and t or cg , bed side lamp make greaves or anchor or l and t or cg , bed switch make greaves or anchor or l and t or cg , pvc squrae box make greaves or anchor or l and t or cg , switch 20 amp make greaves or anchor or l and t or cg , 12 mg surface box make greaves or anchor or l and t or cg , 6 mg surface box make greaves or anchor or l and t or cg , balket white 10 watt make greaves or anchor or l and t or cg , mcb distrubution box 6 way make greaves or anchor or l and t or cg , fire extenguisher make isi , paint brush 4 inch isi mark , paint brush 2 inch isi mark , modular box with plate 3 way make greaves or anchor or l and t or cg , door mat , paint red make asian or nerolac or berger , door stopper make isi godraj or equvlent , connection pipe 450 mm make cera or parryware or hindware , door handle 4 inch make isi godraj or equvlent , urinal pot make cera or jaquar or hindware or hindustan , window glass 2 feet x 3 feet make modiguard or saint gobian , plywood 4 feet x 8 feet make kitply or green ply or duroply , looking mirror make modiguard or saint gobian , float valve make shakti or jainka or prayag or isi , ss combination with box 5 amp make greaves or anchor or l and t or cg , distrubution box 100 amp make greaves or anchor or l and t or cg , pvc bend 4 inch make astral or finolex or supreme , strainer 200 ml sand colour make asian or nerolac or berger , strainer 200 ml yellow colour make asian or nerolac or berger , emery paper , paint roller 8i9 inch make isi , aluminium paint make asian or nerolac or berger , flexible pipe make cera or parryware or hindware , thinner make asian or nerolac or berger or shalimar , tube light 2 feet 20 watt make bajaj or phillips or cg , glass size 22.7 inches x 15.7 inches make saint gobian or modiguard , glass size 8.6 inches x 13.7 inchesmake saint gobian or modiguard , glass size 15.4 inches x 26.5 inches make saint gobian or modiguard , putty for glass fitting make asian or nerolac , rubber packing for glass frame isi mark , nails 3 inch isi mark , nails 4 inch isi mark , nails pin isi mark , batten wooden patti size 8 feet x 4 feet x 4 .5 mm make teak or godrej , nails 6 inch isi mark , glass cutter isi mark , batten //bid details 2 / 101 wooden patti size 1 inch make teak or godrej , vention blind for window , m seal isi mark , white cement make nerolac or asian , nipple 15 mm 2 inch long isi mark , paper holder make cera or parryware or hindware , rubber for flush tank isi mark , fevicol sr

Rod Brush Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors