Latest rod cutter Tenders | Government rod cutter Tenders

State Government

CTN :43028606

11 Dec, 2025 4.18 Lacs

Kutch - Gujarat

Tender For supply of various types of consumable items, tools, and equipment -#901 easyclean (nf) 500 ml. spray can- on line electrical contact cleaner.,safety solvent co2 contact cleaner, wd 40 size 340 gms spray bottle manu hardcastle & waud mfg.co.ltd.,crc-226 contact cleaner in 415 ml/300 gram spray bottle.,painting brush size 25 mm,painting brush size 50 mm ,red oxide, smoke grey paint, portable welding machine, welding electrode holder fully insulated 600 amp. current (hc 600), make-esab.,welding helmet, 9volt alkaline battery, ag-4 cutting wheel make:bosch, screw driver (tester) taparia product no:813 special with neon bulb yellow handle, hydraulic crimping tool with die set (hexagonal type). capacity:-50 sqmm to 400 sqmm.,hss drill bit set 3 mm to 12 mm, bimetal mini hole saw cutter complete with arbor, product no-hsm 12, size-12 mm, bimetal mini hole saw cutter complete with arbor, product no-hsm 19, size-19 mm, bimetal mini hole saw cutter complete with arbor, product no-hsm 35, size-35 mm, bimetal mini hole saw cutter complete with arbor, product no-hsm 44, size-44 mm, bimetal mini hole saw cutter complete with arbor, product no-hsm 29, size-29 mm, portable cut-off saw/machine size 355 mm, hitachi, japan make model no. hu-14/kpt make model no. kc355.,heavy duty industrial keyed drill chuck with key & taper arbors, size: 1.0-16mm, painting spray gun.

State Government

CTN :43022705

09 Dec, 2025 NA

Delhi - Delhi

Tender For supply and installation of electrical and mechanical equipment of tubewell at k block edmc flat sunder nagri and d block mcd flat nand nagari. (re-invite) - supply and installation of electrical and mechanical equipment of tubewell at k block edmc flat sunder nagri & d block mcd flat nand nagari by carrying out following works:- dismantling/lifting of tubewells with the help of gas cutter and heavy manual labour., supply of pvc insulated sheathed copper conductor cable for submersible pump motor of size 6mmsqx3core make :- finolex/ havells/ grandlay/djb approved make, supply of 80 mm dia d/f g.i pipe in b class as per isi 3 mtr long complete with cutting flange for submersible cable and support welded. make :- jindal/ tata., supply of tail piece medium class 0.5 mtr long including one end flanged and other end threaded of 80 mm dia., supply of 80 mm dia g.i bend with both side flanged welded, s/o m.s. clamp of m.s. strip 8mm thick duly hole for holding the pipe of 80 mm dia with nut bolt and washer, s/o m.s bore cover made out of m.s. plate suitable for 12" dia bore complete with suitable hole for pssing the 80mm dia gi pipe., s/o ci, d/f swing type nrv of 80mm dia make:- kirloskar/ ivc, s/o electronic dozing pump (4lph,5.5 kg) electrically controlled operated 230v, 50 hz, supply chemical grade tank of 100 ltrs with pipe make- milton roy/clomax, s/o nut bolts with washer of good quality of 1/2"x2" size, s/o rubber packing sheet synthetic 50% make :- jyoti / national, lighting arrangement including providing fixing1 no. tube light fitting 40 watt , 1 no. bulb point, 1 no. flood light on wall of room and also control board.etc.i/c electrification of room., labour charges for lowering the submersible pump set with all allied e&m equipments and fixing delivery line, valves, electronic dozing pump i/c hardware items as nut, bolts & washer i/c cartage to & fro., lt panel work of tubewell in ram nagar sps :- dismantling of lt panel with allied equipment with the help of skilled labour.., s/o power contactor 32 a. triple pole. make l &t/ havells, s/o front mounting add on aux contact block. make : havells/l&t, s/o three pole power contractor -25a cap. make l&t/ havells, s/o ampare meter (0-30a) 4 size squ. type. make l&t/ae, s/o voltmeter (0-500v) 4 size squ. type. make ae/l&t, s/o indicating lamp set for ryb phase. make l &t/ havells, s/o single phase preventor. make l&t/ minilac, s/o timer switch digital/anolog type. make l&t / havells, s/o over load relay thermal type 14-23 a. make l &t/ havells, s/o star delta timer on delay. make l&t /havells, s/o sp mcb 6a. make : l&t/havells, s/o 3p mcb 63. make : l&t/havells, push button 22.5mm(red / green), s/o 4p 63 amp elcb make : l&t/havells, changeover switch 63 amp., s/o 100a 3p mccb 25ka. with spreader make : havells/l&t., s/o rubber mat for electrical purpose of size 1mx2m and 3mm thick. make:- jyoti/ national, labour charges for repairing of lt panel with installation of above components i/c electric connection , testing and commissioning on load.

State Government

CTN :43022728

09 Dec, 2025 NA

Delhi - Delhi

Tender For supply and installation of electrical and mechanical equipment of tubewell at tahirpur no.1 bps & nursery horticulture gtb enclave no.1. - supply and installation of electrical and mechanical equipment of tubewell at tahirpur no.1 bps & nursery horticulture gtb enclave no.1 by carrying out following works:- dismantling/lifting of tubewells with the help of gas cutter and heavy manual labour., supply of pvc insulated sheathed copper conductor cable for submersible pump motor of size 6mmsqx3core make :- finolex/ havells/ grandlay/djb approved make, supply of 80 mm dia d/f g.i pipe in b class as per isi 3 mtr long complete with cutting flange for submersible cable and support welded. make :- jindal/ tata., supply of tail piece medium class 0.5 mtr long including one end flanged and other end threaded of 80 mm dia., supply of 80 mm dia g.i bend with both side flanged welded, s/o m.s. clamp of m.s. strip 8mm thick duly hole for holding the pipe of 80 mm dia with nut bolt and washer, s/o m.s bore cover made out of m.s. plate suitable for 12" dia bore complete with suitable hole for pssing the 80mm dia gi pipe., s/o ci, d/f swing type nrv of 80mm dia make:- kirloskar/ ivc, s/o electronic dozing pump (4lph,5.5 kg) electrically controlled operated 230v, 50 hz, supply chemical grade tank of 100 ltrs with pipe make- milton roy/clomax, s/o nut bolts with washer of good quality of 1/2"x2" size, s/o rubber packing sheet synthetic 50% make :- jyoti / national, lighting arrangement including providing fixing1 no. tube light fitting 40 watt , 1 no. bulb point, 1 no. flood light on wall of room and also control board.etc.i/c electrification of room., labour charges for lowering the submersible pump set with all allied e&m equipments and fixing delivery line, valves, electronic dozing pump i/c hardware items as nut, bolts & washer i/c cartage to & fro., lt panel work of tubewell in ram nagar sps :-dismantling of lt panel with allied equipment with the help of skilled labour.., s/o power contactor 32 a. triple pole. make l &t/ havells, s/o front mounting add on aux contact block. make : havells/l&t, s/o three pole power contractor -25a cap. make l&t/ havells, s/o ampare meter (0-30a) 4 size squ. type. make l&t/ae, s/o voltmeter (0-500v) 4 size squ. type. make ae/l&t, s/o indicating lamp set for ryb phase. make l &t/ havells, s/o single phase preventor. make l&t/ minilac, s/o timer switch digital/anolog type. make l&t / havells, s/o over load relay thermal type 14-23 a. make l &t/ havells, s/o star delta timer on delay. make l&t /havells, s/o sp mcb 6a. make : l&t/havells, s/o 3p mcb 63. make : l&t/havells, push button 22.5mm(red / green), s/o 4p 63 amp elcb make : l&t/havells, changeover switch 63 amp., s/o 100a 3p mccb 25ka. with spreader make : havells/l&t., s/o rubber mat for electrical purpose of size 1mx2m and 3mm thick. make:- jyoti/ national, labour charges for repairing of lt panel with installation of above components i/c electric connection , testing and commissioning on load.

CTN :43022513

12 Dec, 2025 NA

Gurdaspur - Punjab

Tender For supply of nut bolt 3 inches , welding rod , cutter blade large , square 25 multiply 25mm , ms flat angle 25 multiply 25mm , ms flate angle 40 multiply 3mm , flat patti , pipe 1 multiply 1 foot , jalli 4 feet , ms flat 25 multiply 3mm , square pipe 25 multiply 25mm , ms flat angle 40 multiply 5mm , welding rod 10mm , flat angle 40 multiply 3mm , cutter blade small

CTN :43039868

11 Dec, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of gas cutting equipment (engg item)

CTN :43012844

11 Dec, 2025 48.5 Thousand

Budgam - Jammu And Kashmir

Tender For supply of paint og colour , paint red colour , water dispenser hot and cold with 01 bottle of 20 ltr , welding rod , cutter blade 14 inch , cutter blade 4 inch , adapter 12v 3 amp , mcb box 2 way , mcb box 6 way , flexible pipe 2 inch , u clip 6mm , u clip 4mm , mcb 16 dp , bus bar 100 amp , automatic change over switch

CTN :42992147

08 Dec, 2025 36

Channagiri - Karnataka

Tender For tender for supply and maintenance of street lighting equipment in all villages under kotehal gram panchayat including sc and st colonies 2025-26 - vrd_ktl_sl//syntex panel board 12/18 , vrd_ktl_sl//spn 32amcb , vrd_ktl_sl//fm1q timer , vrd_ktl_sl//contactor 32 a , vrd_ktl_sl//bulb led 15 w , vrd_ktl_sl//bulb led 12 w , vrd_ktl_sl//stret bend pipe , vrd_ktl_sl//stret clamp , vrd_ktl_sl//c f l holdr , vrd_ktl_sl//c g holdr , vrd_ktl_sl//tester , vrd_ktl_sl//cutting player , vrd_ktl_sl//copperwire coil 1.0 mm , vrd_ktl_sl//alluminium coil 6.0mm , vrd_ktl_sl//alluminium coil 4.0mm , vrd_ktl_sl//copperwire coil 2.5mm , vrd_ktl_sl//wonder tape role , vrd_ktl_sl//ceiling fan , vrd_ktl_sl//dp switch , vrd_ktl_sl//screw driver , vrd_ktl_sl//single pole mcb , vrd_ktl_sl//mcb 2 pole , vrd_ktl_sl//mcb 3 pole , vrd_ktl_sl//mcb 4 pole , vrd_ktl_sl//street light off and on handle switch 32 a , vrd_ktl_sl//flood light 250 w , vrd_ktl_sl//flood light 150 w , vrd_ktl_sl//flood light 100 w , vrd_ktl_sl//led set 100 w , vrd_ktl_sl//plastic bulbs cover , vrd_ktl_sl//led set 30 w , vrd_ktl_sl//led set 50 w , vrd_ktl_sl//led bulb 24 w , vrd_ktl_sl//led bulb 20 w , vrd_ktl_sl//led bulb 18 w , vrd_ktl_sl//cfl set 45 w

CTN :42968922

15 Dec, 2025 6.12 Lacs

Saugor - Madhya Pradesh

Tender For providing and supply of mobile test lab equipment and items- electric core cutting machine (for pqc and bituminous pavement),vibratory hammer 5 kg, digital rebound hammer, test sieve set, electric bitumen extractor, sand replacement apparatus (large), rapid moisture meter, slump cone apparatus, plastic cube mould, hot air oven(microwave), weighing balance, digital thermometer, measuring tape set, digital thickness gauge, digital vernier caliper, core cutter with dolly and rammer, misc. tools, enamel tray set, folding camber plate, dg set 3 kva, bitumen filter paper packet containing 100 pieces, diamond core cutter bit 102 mm, diamond core cutter bit 152 mm

State Government

CTN :42971848

18 Dec, 2025 91.81 Lacs

Raichur - Karnataka

Tender For a) scope of work covers supply, installation and commissioning of total 12 nos.of 3d radar level transmitters for the coal level measurement in raw coal bunkers of rtps-unit-5&6 with required pcs, electronic modules, splitters, modems, junction boxes, mounting kit, enclosures, interconnecting cables, software and all other accessories required to make the system complete and fully functional, shall be provided for continuous level measurement and monitoring of level of each coal bunker and also to ensure satisfactory performance of the system commissioned at rtps site which shall be on the basis of single point responsibility, completely covering the activities and services in respect of all the equipment works specified and covered under the specifications. the work involves i) installation and commissioning of 12 nos. 3d radar level type level transmitters with suitable mounting accessories, display indicators, isolators, annunciator, smps, terminals, panel internal wiring, led bulbs, door switch etc. at the bunker level ii)commissioning of rs 485 communication /other cables from bunker level transmitters to the desktop pc at u-5&6 control rooms.iii)commissioning of desktop pcs for 3d multi vision for monitoring of all the 12 bunkers level at u-5&6 control room respectively and also both units bunker levels at pc being installed at chp control room. iv)loading of all the required licenced software to the desktop pc for 3d radar level transmitter and cable routing, glanding, mounting of cable tray, termination and ferruling is in the contractors scope.cable trays will be provided by m/s.kpcl.b)all fabrication works required for installation and commissioning of instruments with jbs,protective cover/canopies and allied works are in contractor/agency scope itself.c) all civil works like drilling/cutting rcc floors,grouting,refilling floors,conduiting under ground cables cable tray mounting, masonary works are in contractor/agency scope itself.d)storage of materials while executing works is single point responsibility of contractor/agency scope itself. e)software details-1. the page containing all bunker level data shall be in full page which must be visible from at least a distance of 6-8mtr .(font size should be more) and shall have a historical trend storage for minimum 45days & real time trend with not less than15min sampling time. f) at chp control room, the existing kpcl pc shall be enabled with bunker level software & shall be communicated through existing lan and as a redundancy the seperate optical fiber cable communication with media convertor has to be provided.the lan cables has to be protected with cable conduit g)materials supply shall be completed in all respect within the stipulated period as per the contract. materials shall be delivered to rtps site through ee(stores)o&m. unloading of materials at rtps site location and shifting of the same to work location is under the contractor/agency scope only. h)handling, shifting, unpacking and erection and commissioning of the entire system shall be under the scope of bidder itself. i)all required consumables, hardware and licenced software, accessories and any other materials which are not included in the scope and required for successful installation and commissioning of the 3d radar level transmitters for the coal level measurement in raw coal bunkers of rtps-unit-5&6 are under the contractor/agency itself. j)all the materials required for the installation and commissioning of 3d radar level transmitters for the coal level measurement in raw coal bunkers of rtps-unit- 5&6 shall be made as detailed under the technical specifications. k)interfacing of all the bunker level transmitters outputs to the desktop pcs at u-5&6 control rooms through rs - 485 communication protocol.(the required 1 pair x 1 sq.mm shielded armoured cables as per requirements shall be supplied approx-500 meters or if more). for more details of scope of work refe