Latest rod guide Tenders | Government rod guide Tenders

Central Government/Public Sector

CTN :45469372

02 Jul, 2026 NA

Patna - Bihar

Tender For corrigendum : supply of optics consumables, pedestal and spacers -optical pedestal post , clamping fork , post spacers , laser viewing card , half-wave plate with mount , quarter wave platwe and mount , rotation mount , magentic height ruler , right-angle clamp , centered mounting post joist , guide rod , guide rod

CTN :45720703

30 Jul, 2026 2.00 Crore

Chhatarpur - Madhya Pradesh

Tender For inviting rates of different items for construction of diffrent type of work as per demand on cm help line or ward parsad or public - supply of handpump material 2026-27, excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead up to 1000 m as per section-300 of the specifications.item no nvi-3.12, construction of embankment/sub-grade/earthen shoulders with material obtained from other sources, as per provisions of section 305 of the specifications, with approved materials/soil confirming to requirements given in table 301-1 of specifications including all lead and lifts, including cost of watering, compaction by vibratory roller/heavy pneumatic type roller etc. confirming to requirements given in table 301 2 of the specifications complete.item no nvi-3.12, construction of granular sub-base, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, including all lifts and lead complete in all respect as per section-400 of the specifications.by mix in place method item no nvi -4.1.1.1, construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 26.5mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 of the specifications, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing and as per section 601 of specifications.item no nvi- 6.1.1, providing and laying cement concrete grade m-20 with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate / screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, including cutting of joints @ 4 to 5 m interval and filling it with hot applied bituminous sealant (without dowel bars) (max. thickness 20 cm).item no nvi-6.4, construction of dowel jointed, plain cement concrete pavement in m-30 grade concrete over a prepared sub base with 43 or higher grade cement, coarse and fine aggregate conforming to is:383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with electronic sensor spreading the concrete by shovels, rakes compacted using needle, screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion, and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, placing of dowel bar, tie rod admixtures as approved, curing compound, finishing to lines and grades as per approved drawings as per irc:15 and as per section-602 of the specifications complete excluding cost of steel in dowel bar and tie rod etc.item no nvi-6.2.1, earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom,dressing of sides,disposal of excavated earth including of all lift and lead upto 50m.disposed earth to be levelled and neatly dressed.all kinds of soil item no nii 2.6.1, demolishing cement concrete manually/by mechanical means including disposal of material with in 50 meters lead as per direction of engineer-in-charge.1:3:6 or richer mixitem no nii

Central Government And Public Sector

CTN :45696206

06 Jul, 2026 52.70 Lacs

Delhi - Delhi

Tender For providing of building materials and execution of the allied works under the work conservation of well area of lahore gate including rampart at red fort - material and work, u. lime katni (in air tight bags), surkhi (free from silt, dust, organic any other foreign material), river course sand (free from silt, dust, organic any other foreign material), gum babool, gur desi, belgiri, jute/sun, lakhori brick (as per site requirements nominal size & specification), brick jeera 6mm (free from clay, organic material), brick aggregate (free from clay, organic material) 20 to 25 mm nominal size, red sand stone thickness 100mm of required size, copper dowel (as per site requirement), red sand stone required (as per site requirement size), red sand stone 50 mm (as per site required size thick for jalie work), red sand stone 40 mm (as per site required size thick undressed for chajja), copper rod 10 mm (as per site requirement), un slaked lime katni (in air tight bags) fine quality, marble dust powder [kg], batasha [kg], araldite [kg], 6 inch dia ballies (6 ft ) [each], ply 12mm thick [m2] water resistant, mud (clay ) [cum] free from impurities, dry uppley [each], planks 50m thick [m2] (well seasoned), jute rope 1 inch [kg], "dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres leaddismantling old lime plaster", demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge.nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix), demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge., painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.62.1 two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture, provision of provising and fixing of galvanised mild steel material xpended material (xpm) jali of 4mm thick silver in clour inluding fixing charges etc complete, "float glass panes 9.7.7.1 4 mm thick glass pane (weight not less than 10kg/sqm)", "providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).9.1.2 sal wood", "providing and fixing factory made single extruded wpc (wood polymer composite) solid plain flush door shutter of required size comprising of virgin polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 n (face) & 900 n (edge), minimum compressive strength 50 n/mm2, modulus of elasticity 850 n/mm2 and resistance to spread of flame of class a category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk s.s screws, all as per direction of engineer-in- charge. (note: stainless steel butt hinges and necessary s.s screws shall be paid separately) 30 mm thick 26.87.1", "providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the rcc structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry :

CTN :45499366

29 Jun, 2026 NA

Bathinda - Punjab

Tender For bid to ras supply of ring set , piston , liner cylinder , gasket cyl head , shell connecting rod , guide and clip , guide safety valve spring , spring valve

CTN :45281594

02 Jul, 2026 NA

Ernakulam - Kerala

Tender For corrigendum : supply of crn 91 gun spares d d - rivet solid c1001 5320-024951 , guide c1007 5340- 174971 , rivet solid c1009- 1 5320-024953 , rivet solid c1009 2a42 -01- 009 , stop c1016 2a42 -01-016 , split pin c1022 gost 397- 79 , pawl c1024 3040- 016833 , holder assembly ammunition c1050 2a42- 01-050-cb , adapter bushing c1037 4730-007388 , disconnector spindle c1042 2a42-01-042 , handle c1096 2a42- 01- 096 , pin straight headless c1045 5315-010089 , detent c1046 2a42-01-016 , pin straight headless c1047 5315- 046956 , bar locking slider c1058 3020- 001584 , insert body c1059 5340- 174646 , pin straight headed c1063 5315 -041337 , catch c1101 2a4201 - 101 , spring flat c1082 5360 - 007759 , catch c1084 5340-174647 , rod c 1085 5340- 170475 , arm c1102 6675- 001520 , pin axis c1087 5315- 049570 , spring hel compression c1088 5360 -040686 , stop mechanical c1090 5340- 169948 , front stripper c1092 2a42-01-092 , stop retaining metalic c1093 5340- 167733 , slide assembly c1100 1005- 560055 , rod assembly c1110 1005- 560436 , bracket angle c1120 5340- 169987 , pin straight headless c1121 5315 -010061 , stop c2018 4730 - 007336 , plate c2021 2a42 -02 -021 , detent c2025 1005 -560454 , barrel gun c2023 1005-560453 , lock pin c2031 5315- 010064 , gas cylinder c2037 2a42- 02-035 , barrel catch c2037 2a42 -02- 037 , ring c2039 5365- 011142 , stopper c2049 4730 - 007334 , lock pin c2051 5315- 010076 , positioner c2052 2a42- 02- 052 , pin lock c2054 5315- 010086 , catch c2060 5340 -175220 , rod guide assembly c3000 1005-557839 , slider c3001 2a42 -03 - 001 , pin straight headless c3003 5315- 010087 , piston c3004 3040 -022476 , ejector c3006 2a42- 03- 006 , tube assembly c3010 1005- 007974 , pin straight headless c3011 5315 -010063 , pin straight headless c3012 5315 -010088 , extractor artillery cartridge c3014 1005 - 007051 , breech block c3015 2a42 - 03- 015 , pin firing c3019 1005 - 007048 , pin straight headed c3022 5315 -010082 , pin straight headless c3031 5315 - 010078 , spring helical compression c4006 5360 - 007787 , back plate assembly c5000 2a42 -05- 000cb , spacer sleeve c5011 5365 - 180972 , pin straight headless c5016 5315- 030193 , pin straight headless c5017 5315 -030166 , ball c5018 gost3722- 81 , plate back assembly c5020 1005- 560291 , pawl c5021 3040 -021700 , pin straight headless c5023 5315_ 049538 , sear c5029 1005 - 560073 , spring helical compression c5032 5360- 040687 , pin straight headless c5044 5315 - 049540 , roller bearing c5045 3110 -108130 , connecting link rigid c5046 3040 - 021952 , connecting link rigid c5047 3040 - 021730 , pin straight headed c5051 5315 - 049542 , plug protective dust and moisture seal c5055 5340 -174653 , spring helical compression c5064 5360 040689 , pin lock c5065 5315 - 049573 , spring helical compression c5067 5360 - 040690 , handle c5111 2a42 -05 -111 , spring flat c5088 5360 - 040692 , sear c5100 1005 - 560072 , pin grooved headed c8000 2a42 -08 -000cb , hook c 9055 icm 2118 , holder spring c9080 5340 - 178920 , holder contact c9090 5999 - 049812 //bid details 2 / 51

Central Government/Public Sector

CTN :44454734

02 Jul, 2026 NA

Thiruvarur - Tamil Nadu

Tender For corrigendum : supply of srp pumps and acessories d d -grd_153103824_lot1 , 35_sucker rod coupling_150043037_lot1 , 36_sinker bar for srp unit_150043187_lot1 , 37_sinker bar for srp unit_150043187_lot2 , 38_sinker bar for srp unit_150043187_lot1 , 39_sinker bar for srp unit_150043187_lot2 , 40_sinker bar for srp unit_150043187_lot1 , 41_pumping tee_153120037_lot1 , 42_pumping tee_153120037_lot1 , 43_pumping tee_153120037_lot1 , 44_gas anchor_150008221_lot1 , 45_gas anchor_153103829_lot1 , 46_gas anchor- 153103830_lot1 , 47_gas anchor_153103345_lot1 , 48_gas anchor_153103344_lot1 , 49_gas anchor_153103344_lot1 , 50_gas anchor_153103344_lot1 , 51_sucker rod guide shop molded_150009970_lot1 , 52_sucker rod guide shop molded_150009970_lot2 , 53_sucker rod_150009676_lot1 , 54_sucker rod_150009676_lot2 , 55_sucker rod_150009676_lot1 , 56_sucker rod_150009676_lot1 , 57_shop molded guide sucker rod_150009676_lot1 , 58_shop molded guide sucker rod_150009676_lot2 , 59_rod guide shop molded_153103828_lot1 , 60_sucker rod guide shop molded_150009969_lot1 , 61_sucker rod_150009677_lot1 , 62_sucker rod_150009677_lot2 , 63_sucker rod_150009677_lot1 , 64_shop molded guide sucker rod_150009677_lot1 , 65_shop molded guide sucker rod_150009677_lot2 , 66_guide rod shop molded_153103827_lot1 , 67_sucker rod_150010100_lot1 , 68_sucker rod moulded guide sucker rod_150010971_lot1 , 69_rod rotator_153103840_lot1 , 70_sucker rod roller_153102865_lot1 , 71_wheeled rod guides_154011530_lot1 , 72_wheeled rod guides_154011530_lot2 , 73_sucker rod_153103301_lot1 , 74_sucker rod_153103301_lot2 , 75_sucker rod_153103301_lot1 , 76_sucker rod_153103301_lot2 , 77_sucker rod_153103301_lot1 , 78_sucker rod_153103301_lot1 , 79_sucker rod_153103301_lot1 , 80_sucker rod_153103301_lot2 , 81_sucker rod_153103304_lot1 , 82_sucker rod_153103304_lot2 , 83_sucker rod_153103304_lot1 , 84_sucker rod_153103304_lot2 , 85_sucker rod_153103304_lot1 , 86_sucker rod_153103304_lot1 , 87_sucker rod_153103304_lot1 , 88_sucker rod_153103304_lot2 , 89_sucker rod_153103305_lot1 , 90_sucker rod_153103305_lot1 , 91_pony rod_154011396_lot1 , 92_pony rod_154011396_lot1 , 93_pony rod_154011396_lot1 , 94_pony rod_154011396_lot1 , 95_pony rod_154011396_lot1 , 96_pony rod_154011397_lot1 , 97_pony rod_154011397_lot1 , 98_pony rod_154011397_lot1 , 99_pony rod_154011397_lot1 , 100_pony rod_154011397_lot1 , 101_pony rod_154011397_lot1 , 102_pony rod_154011398_lot1 , 103_pony rod_154011398_lot1 , 104_pony rod_154011398_lot1 , 105_pony rod_154011398_lot1 , 106_pony rod_154011398_lot1 , 107_pony rod_154011398_lot1 , 108_pony rod_150005458_lot1 , 109_pony rods_150000597_lot1 , 110_pony rods_150000597_lot1 , 111_pony rods_150000597_lot1 , 112_pony rods_150000597_lot1 , 113_pony rods_150000597_lot1 , 114_pony rods_150000598_lot1 , 115_pony rods_150043052_lot1 , 116_pony rods_221409110_lot1 , 117_pony rods_221409111_lot1 , 118_pony rods_221409112_lot1 , 119_pony rods_153103802_lot1 , //bid details 2 / 132 120_crossover_150043041_lot1 , 121_crossover_150043041_lot1 , 122_crossover_150043042_lot1 , 123_crossover_150043042_lot1 , 124_crossover_150004219_lot1 , 125_crossover_150004220_lot1 , 126_srp stuffingbox_153103807_lot1 , 127_srp stuffingbox_153103807_lot1 , 128_srp stuffingbox_153103807_lot1 , 129_srp stuffingbox_153103807_lot1 , 130_srp stuffingbox_153103807_lot1 , 131_srp stuffingbox_154011445_lot2 , 132_polish rod_153103302_lot1 , 133_polish rod_153103302_lot1 , 134_polish rod_153103302_lot1 , 135_polish rod_153103809_lot1 , 136_polish rod_153103809_lot1 , 137_polish rod_153103809_lot1 , 138_polish rod_153103809_lot1 , 139_polish rod_153103809_lot1 , 140_polish rod_153103809_lot1 , 141_polish rod clamp_150006989_lot1 , 142_polish rod db pin type_153301909_lot1 , 143_polish rod db pin type_153301909_lot1 , 144_polish rod db pin type_153301909_lot1 , 145_pony rods_150005459_lot1 , 146_pony rod_154011399_lot1 , 147_pony rod_154011399_lot1 , 148_pony rod_154011399_lot1 , 149_pony rod_154011400_lot1 , 150

corporations/Associations/Others

CTN :45420625

01 Jul, 2026 NA

Hyderabad-T - Telangana

Tender For corrigendum : supply of m4x15 type-1 standoff, csg std.50 , m4x25 type-1 standoff, csg std.50 , m4x60 type-1 standoff, csg std.50 , m5x25 type-1 standoff, csg std.50 , m5x45 type-1 standoff, csg std.50 , m5x70 type-1 standoff, csg std.50 , m6x20 type-1 standoff, csg std.50 , m6x25 type-1 standoff, csg std.50 , m6x35 type-1 standoff, csg std.50 , m4x35 type-2 standoff, csg std.50 , m4x50 type-2 standoff, csg std.50 , m4x55 type-2 standoff, csg std.50 , m3x20 type-3 standoff, csg std.50 , m3x30 type-3 standoff, csg std.50 , m4x15 type-3 standoff, csg std.50 , m6x30 type-3 standoff, csg std.50 , top cover standoff, csg std.140 - p-715 , canopy standoff, csg std.140 - p-715 , side cover standoff, csg std.140 - p-715 , boss, csg std.140 - p-715 , captive screw, csg std.140 - p-715 , spacer type-1, md-19-010365-a4 , eye bolt boss, b-16, csg std.108 , grounding stud, csg std.140 - p-363 , aluminium rod guide, csg std.140 - p-742 , m4 special nut, csg std.140 - part- 7 , m6 special nut, csg std.140 - part- 7 , conical spring, csg std.140 - part- 6

Central Government/Public Sector

CTN :44601166

27 Jun, 2026 NA

Nashik - Maharashtra

Tender For bid to ras corrigendum : tender for supply of osaero job work for manufacturing of 61 parts ref semfg 860 c c - tie rod , bracket , plug , bolt , nut , ring , ending , lug , lug , bush , shaft , rod , fork , bolt , bolt , bush , bush , bush , bell crank , bolt , rod , rod , eye end , plug , flange , flange , body , flange , nipple , end tip , body , flange , pipe connection , body , flange , pipe connection , bush , flange , pipe connection , nipple , chuck , flange , plug , cover , pipe holder , flange , nut , nut , dowel , end piece , ring , nut , nut , coupling , coupling , coupling , coupling , end piece , lock , bush , bracket

CTN :45620992

30 Jun, 2026 NA

Kanchipuram - Tamil Nadu

Tender For supply of electrical work - miniature circuit breaker make: havels/siemens/l&t/bch/schneider, 32 amps, 2 pole mcb without metal enclosure, for lighting circuits, 230v ac, type b or c tripping, is/iec 60898 standard, overload and short circuit protection., 32 amps, 3 pole mcb without metal enclosure, for lighting circuits, 230v ac, type b or c tripping, is/iec 60898 standard, overload and short circuit protection., 63 amps, 3 pole mcb with metal enclosure, for power load circuits, 415v ac, type c or d tripping, is/iec 60898 standard, overload and short circuit protection., 16 amps, 1 pole mcb without metal enclosure, for lighting circuits, 230v ac, type b or c tripping, is/iec 60898 standard, overload and short circuit protection., 20 amps, 1 pole mcb without metal enclosure, for lighting circuits, 230v ac, type b or c tripping, is/iec 60898 standard, overload and short circuit protection., mcb rail 1 meter long., l&t make thermal overload relays (olr), l&t make, thermal overload relay olr: model- mn-5, adjustable 30-50 amps, direct mount, 1no+1nc, ambient compensation, manual/auto reset, iec 60947-4-1., l&t make, thermal overload relay olr: model- mn-5, adjustable 45-75 amps, direct mount, 1no+1nc, ambient compensation, manual/auto reset, iec 60947-4-1., l&t make, thermal overload relay olr: model- mn-5, adjustable 20-33 amps, direct mount, 1no+1nc, ambient compensation, manual/auto reset, iec 60947-4-1., l&t make, thermal overload relay olr: model- mn-5, adjustable 14-23 amps, direct mount, 1no+1nc, ambient compensation, manual/auto reset, iec 60947-4-1, star delta electronic timer, make : gic or l&t or selec, adjustable time range 0.1-60 sec, multifunction, din-rail mount, 2 no+2 nc, led status indication, wide voltage range 230/420 v ac, 50 hz, iec 60947-5-1 compliant., 2 a. hbc fuse - 415 v. a.c., model: ns2, 32 a. hf fuse - 415 v.a.c., model: hf14x51 sf-90159., 63 a. hf fuse - 415 v.a.c., model: hf14x51 sf-90159., fuse wire 16 a. 100 grams pack, fuse wire 32 a. 100 grams pack, fuse wire 63 a. 100 grams pack, dowel make aluminium lugs: (ring type), 35 sq.mm, 70 sq.mm., 95 sq.mm., 120 sq.mm., 150 sq.mm, dowels make copper lugs: (ring type), 4 sq.mm. - hole dia 5mm, 6 sq.mm. - hole dia 8mm, 10 sq.mm. - hole dia 8mm, 25 sq.mm. - hole dia 10mm, 1.5 sq.mm. u-lug (kompress fork type), high-grade porcelain/ceramic heavy-duty industrial pendant holder suitable for a type of bc (bayonet cap) with pin-type contacts, make: crompton/philips/havells/bajaj, 230v, 100w bc (bayonet cap) pin-type incandescent bulb, clear glass, high illumination, and long-lasting performance., 230v, 60w bc (bayonet cap) pin-type incandescent bulb, clear glass, efficient lighting, and extended service life., 24v, 60w bc (bayonet cap) pin-type incandescent bulb, clear glass, high illumination, and durable performance, 22 watts, batten type, 4 feet led tube light - make: isi standard, 230 v. ac 50 watts led flood fitting., 230 v. ac 100 watts led flood fitting., 230 v. ac 150 watts led flood fitting., 3/4 inch wide pvc insulation tape, flame-retardant, moisture-resistant, and suitable for electrical insulation-10 mtrs roll, 1-inch wide fiber glass tape, high-temperature resistant, non-conductive & suitable for electrical insulation and cable wrapping- 50 mtrs roll, 250 w, mercury vapour lamp, screw type, clear/coated, 230 v ac, 50 hz, standard base (e27/e40), suitable for outdoor/indoor lighting applications.

CTN :45544465

25 Jun, 2026 NA

Dehradun - Uttarakhand

Tender For corrigendum : supply of piston , gen set controller , piston ring , eng gasket set , push rod guide , green push button , nozzle , fuel flexible pipe , exhausht hose assy , big end bearing , eng mounting pad , door hinge , starter push button

Rod Guide Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector