Latest roller scrap Tenders | Government roller scrap Tenders

Central Government/Public Sector

CTN :45365796

27 Jun, 2026 11.50 Lacs

Jammu - Jammu And Kashmir

Tender For repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered wi

Central Government/Public Sector

CTN :45365852

20 Jun, 2026 40.00 Lacs

Kalimpong - West Bengal

Tender For repair to certain roads including road furniture at kalimpong mil stn under ge 867 ews - m&l for repairs to pot holes of depth exceeding 30 mm thick, area not exc 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads , paths etc cutting around edges to at least 25mm in depth, and making good by applying tack coat with paving bitumen grade 10 pack primer (vg-10) @ 5kg per 10 sqm putting in premixed bituminous macadam, well rammed and sealed with binder with paving bitumen grade 30 pack (vg-30) @9.8 kg per 10 sqm blinded with 0.09 cum of stone chipping, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30 mm, complete all as specified and directed., m&l for preparing existing black top road surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with bitumen primer using paving bitumen grade 10 pack (vg-10) @ 5kg per 10 sqm, complete all as specified and directed., m&l for premix bituminous macadam using paving bitumen of grade 30 pack (vg-30) @ 4% by weight of total mix laid / rolled and compacted to required gradient and camber with 8 to12 tonne power road roller and rolled to a uniform smooth surface (consolidated thickness 75 mm or less), complete all as specified and as directed., m&l for 40 mm thick consolidated thickness bituminous premixed carpet with 0.54 cu.m per 10 sqm of stone chipping and mixed with 29.20 kg per 10 sqm of binder using paving bitumen grade 30 pack (vg-30) laid and rolled with 8 to 12 tonne power road roller and compacted to required camber and gradient, complete all as specified and directed., m&l for liquid seal coat by applying paving bitumen of grade 30 (vg-30) @ 9.8 kg per 10 sqm blinded with 6.3 mm size stone chipping @ 0.09 cum per 10 sqm and rolled to a uniformed smooth surface by 8 to 12 tonne power road roller, complete all as specified and directed., providing and lying mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-29 using approved coarse aggregates, fine aggregates filler materials and bitumen, prepared by using mastic cooker including cost and carriage of all ingredients, cost of heating aggregates and binder mixing in specified proportions conforming to approved job mix formula and laid to required level and slope after cleaning the surface, compacting, sealing the construction joints and surface finishing conforming to specifications including providing antiskid surface with bitumen pre-coated fine arraigned hard stone chipping of 13.20mm nominal size at the rate of 0.005 cum per 10 sqm and at an approximate spacing of 10 cm centre to centre in both directions, pressed into surface when the temperature of surfaces not less than 200c, protruding 1 mm to 4mm over mastic surface including the hire charges of all tools and plants and machinery, pay of operators, cost of fuel and lubricants and quality control all complete as per clause 516 of specification for road and bridge works of morth (5th revision). 25mm thick (pakur) vg-30 (po, 10/20 (p), complete all as specified and directed, supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed., supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with pama striplens reflector of model no. da 972.0 fixed with and incl ms stud of suitable size as per manufactures instructions and all as specified and directed., m&l for applying ther

corporations/Associations/Others

CTN :45298669

05 Jun, 2026 NA

Multi City - Multi State

Tender For auction sale of scrap empty gas cylinders assorted. (mix type),fire extinguisher cylinder scrap. (mix type),damaged bushing scrap,scrap safety helmets,misc. electric & mech. panels scrap,scrap mixed iron (with concrete),boiler tubes scrap pipe & fittings,scrap of ms drums 0-50 ltr capacity,scrap crusher hammer,scrap of machining chips - steel,scrap machine dozer diesel engine,scrap idler rollers,scrap of plastic/pvc cans 0-50 ltr capac,scrap electrical items - motors,air intake scrap filter,scrap air conditioner,scrap of rail- track steel,scrap of cast iron steel,grinding rolls scrap.,scrap of ms drums > 200 ltr capacity,scrap of plastic/pvc cans >200 ltr capac,packing scrap wood.,water cooler scrap:,obsolete spares item (1256 items)

corporations/Associations/Others

CTN :45285681

04 Jun, 2026 NA

Vikarabad - Telangana

Tender For auction sale of old, used, waste & scrap scrap pp wrappers,old, used, waste & scrap celling fan serviceable,old, used, waste & scrap sayaji road roller scrap with engine,old, used, waste & scrap unserviceable loader tyres 17.5x25,old, used, waste & scrap scrap window a/c 1.5 ton,old, used, waste & scrap used automobile battery containers 25/21 plates,old, used, waste & scrap hrcs casting scrap gr vii,old, used, waste & scrap used/ worn out dumper tyres scrap size 18.00 x 25,old, used, waste & scrap damaged steel drums,old, used, waste & scrap e-waste consisting of scrap computer parts, etc,old, used, waste & scrap conveyor belt scrap,old, used, waste & scrap bearing scrap

CTN :45156776

20 May, 2026 NA

Doiwala - Uttarakhand

Tender For ci casting pipes cross roller scraper etc

CTN :44920943

28 Apr, 2026 NA

Villupuram - Tamil Nadu

Tender For supporting arms for top roller scrapper plate

CTN :44962694

28 Apr, 2026 NA

Perambalur - Tamil Nadu

Tender For the purchase of top and bottom roller scrapper

CTN :44959001

01 May, 2026 86.8 Thousand

Darjeeling - West Bengal

Tender For repair to vehicle - dismantaling and opening of stering assembly repairing and replacing the following necessary spare parts fitting and testing including supply of the following parts , assy.kit-suspension rubber parts , assy tie rod , centre link assy 113 08 364 0c , bush , ball joint assy-upper wb , assy ball joint lower , taper roller brg 30205 , taper roller brg lm48548 , assy pipe union bolt , wheel cylinder assy , thrust washer-idler arm , split pin 6.3 x 6.3 , cotton piece , oil seal , grease pack , assy top wishbone , gasket fip to support , sealing washer 8 x12 is 3175 cu , fuel paper element , dismantaling and opening of gear box clutch plate brake system , repairing and replacing the following necessary spare parts fitting and testing supply of the following parts , assy accelerator cable hand brake , brake oil , front brake pad , rear brake lining , master cylinder kit , assy 10 inch vacuum booster , kit brake lining non-asb af2873 , nut , castrol extra long life gear oil 80 w 90 , nyloc nut m14 , washer , split pin 3.2x22 , gasket , clutch plate , pressure plate , release bearing , flywheel , taking out old unsv lub oil filter , fuel filter , air filter and draining of engine oil complete inclding refitting and supply of the following items , lub oil filter , fuel filter element primary , fuel filter element secondary , air filter element , engine oil 20w 40 make -castrol gtx , taking out old unsv external body light , fog light complete including refitting and supply of the following items , wind shield , tail light set , fog light , wiper , washer fluid tank , side mirror orvm , cleaning , washing and polishing of above mention vehicle as per standard norms , testing of vehicle on road after completion of work for smooth running upto entire satisfaction of age e m bagdogra

corporations/Associations/Others

CTN :44909329

28 Apr, 2026 NA

Ukai - Gujarat

Tender For auction sale of iron scrap,ms scrap,control cable scrap (copper),scrap conveyor belt (nylon) pieces,copper scrap,scrap pvc wire/cable (copper),scrap pvc wire/cable (alu),cut bearing scrap,alluminium scrap (misc),hammer ring (scrap),high crome bullring segment scrap,scrap of miscellaneous item (instrument),electrical scrap (misc.),control cable scrap (alu.),wooden scrap,scrap conveyor belt (cotton/rubber),g. i. scrap (misc.),cast iron scrap,high crome grinding roller scrap,boiler tube pieces scrap carbon steel,empty oil & grease barrel cap-209/210 ltr,dirty oil with barrel,scrap metals parts with porcelain transmission,scrap 220 kv lightening arrestor (porceline type)