Latest roller chains Tenders | Government roller chains Tenders

Central Government/Public Sector

CTN :40485148

05 Jun, 2025 NA

Ahmedabad - Gujarat

Tender For supply of chain cover as per rdso drawing no. skel-5001 and specification ms-is:2062 for hand bra ke. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40475430

02 Jun, 2025 NA

Jodhpur - Rajasthan

Tender For .supply of tertiary pin arrangment consisting of pin , chain and lock washer (as per rdso specification no rdso/2011/cg-03(rev.01))of sanrok make cbc make/brand- sanrok fir ms offer :- tertiary pin arrangement to sanrok drg no. 1ed-4452 consisting of pin, chain and l ock washer as per rdso specification no. rdso/2011/cg-03 (rev-3).of make :- sanrok( warranty peri od : upto 30 months from the date of supply) [ warranty period: 30 months after the date of delivery ]

Co-operative

CTN :40478298

02 Jun, 2025 40.0 Thousand

Mehsana - Gujarat

Tender For service work of movable chain conveyor for new ms shaft with wheel fitting as per drawing

CTN :40467775

14 Jun, 2025 NA

Dhemaji - Assam

Tender For supply of galvanised steel chain link fence - laip 3750mm long , laip 2000mm long , concertina coil , barbed wire , binding wire 0.90mm dia , galvanized steel chain link fence , nut bolt 12mm dia 60mm long , nut bolt 12mm dia 100mm long , flat iron 50x6mm , 10mm dia ms round bars , ordinary portland cement grade 43 , coarse sand , 20mm stone aggregates , 40mm stone aggregates , installation of chain link fence

CTN :40428261

10 Jun, 2025 NA

Kargil - Jammu And Kashmir

Tender For supply of ms angle iron fencing post 3 point 20m long , ms angle iron structure 1 point 70m long , ms flat iron 50x3 mm of length 2 point 20m long , 3mm dia chainlink fencing and size of mesh 75x75 mm dia , galvanized barbed wire of 2 point 24 mm dia wire barbs fixed at 100 mm , nut 50mm long 12mm dia , line bar of 8mm to support chain link , footing of post , ms door , synthetic paint and cement bags , aggregiate sand and masonary , labour and installation charges

CTN :40361759

06 Jun, 2025 NA

Leh - Jammu And Kashmir

Tender For supply of chain link security fencing - type angle iron picket , angle iron supports , ms flat , chain link fencing , barbed wire , nuts 50mm , line bar of 8mm , footing of posts , cement opc 43 , coarse aggregate (sand) , 20mm graded stone , 40mm graded stone , 63 to 100mm crushed stone , brick bats 63 mm , erection tools

Central Government And Public Sector

CTN :40423813

12 Jun, 2025 NA

West Champaran - Bihar

Tender For supply, dismantling, fabrication, erection and commissioning of boiler pressure parts and auxiliary parts roof baffles ducting casing hoppers at hbl plant lauriya, west champaran, bihar- 845453 - supply, dismantling, fabrication, erection & commissioning of boiler pressure parts & auxiliary parts, roof baffles, ducting, casing hoppers at hbl plant, lauriya as per the below details and attached tender document:, dismantling, fabrication, erection, commissioning of boiler pressure parts, evaporator, aph, economizer, esp ducting, casing hopper chute and baffles, slot chain conveyor runner plate turf.broad job scope includes:i) supply of ms plate is 2062, gr e250 suitable for high pressure boiler at site including transportation, loading & unloading size: 6 mm thick, 1250 x 6300 mm, qty = 8 mt make: tata/sail/jindal steelii) supply of ms plate is 2062, grade e250 suitable for high pressure boiler at site including transportation, loading & unloading. size: 8 mm thick, 1250 x 6300 mm, qty = 2 mt make: tata/sail/jindal steel please refer to the job scope for details., dismantling of existing expansion bellows, fabrication & installation of single metallic ms rectangular expansion bellows. size- 1150 mm x 2235 mm x 400 mm face to face length, thickness- 3 mm.please refer to the job scope for details.

CTN :40170647

26 May, 2025 NA

North 24 Paragana - West Bengal

Tender For bid to ras purchase of spares - cotter pin(price list sl-324) , cotter pin(sl-326) , collar(sl-21) , gasket , rod snap (price list sl-40) , roll pin(sl-23) , gasket (pl sl-440) , nut , starter lock rod(page-07) , rod throttle stop arm , pin , cotter pin (ms sl-400) , screw driver , o ring , screw driver , universal pinion(sl-22) , snap rod , rod joint , bushing , pliers , spark plug champion ql 16v(1)(2) , starter lock lever , ring spnr 9.53x11.11mm (3/8 inch x7/16 inch) , seal ring(30hp-m-page-03) , seal , gasket , prop nut(sl-181) , ring spnr 9.53 start 11.11 , piston pin(price list sl-478) , pad , tubing , o ring (p-19) , nut , spark plug , tool kit bag , bolt d ring to cover(ms sl-36) , rope , box spnr 21x23mm , tool bag empty , spark plug(ngk-b7hs-10)(sl-464) , spark plug indian , pr comb plier (ces sl no 208) , screen (fuel pump sl-16) , tube box spnr 10x132mm , sparking plug (india) , seal , o ring , conector- fuel tank , starter handle(price list sl-539) , gasket (30) , cover , scissors flat 250 mm , clamp , gasket , powerhead base(ppl sl-728) , seal impeller(price list sl-697) , stop leaf , lever -shift interlock , screw bracker to plate(ces sl no 213) , plug l 78v , grommet throttle cable(obm 30hp(j) p 4) , float valve & seat assy(price list sl-1060) , cover leads , connector , throttle cable to lower motor cover(sl- , lanyard stop switch(sl-612) , gasket for gear oil plug , gasket lower side mount(ms sl-247) , pin (shift handle kit 25-35hp)(sl-345) , jet bowl vent , protector spark plug lead , safety chain(ces sl no 210) , spring starter , tool kit for obm 30hp (p) , tool kit set for obm 30 hp yamaha , inlet needle seat and gasket (ms cat sl-126) , nut , needle valve , gauge oil lever , seal steering handle , spanner plug , carburetor repair kit (containing 11 nos items) , spacer , fuel connector - engine end , dowel pin , connector assembly - fuel , thrust bushing propeller (ms ser no 135) , spark plug (ms cat sl-52) , oil seal , tool kit set for obm 35 hp (j) , ring set standard , shift rod low , gasket , float guage , spark plug lead assy , grommet control shaft(obm(j) 30hp p-4 sl no14) , bypass cover(p-15) , piston (standard)(ctlg sl no 14) , lever and pin assy throttle , seal , hose and primer bulb assy , impeller water pump , starter solenoid , gear case filter , timing belt , rod thrust and retrainer , charger coil , cam and shaft (exhaust , fuel line assy(sl-462) , fuel line assembly , stop switch kit , guide pin assy , rod assy connecting , propeller (10 in. pitch)(sl-500) , tank assembly fuel (plactic-6.6 gallon) , fuel pump assy (ms-40) , gasket set , tiller handle (black) , craddle piston , stator , ignition coil(ctlg sl-17) , driveshaft (xx-long) , thermomelt stik 52 c , carburetor , propeller assy(obm 30 hp parsun plate no-8) , thermomelt stik 73 c , recoil starter assy (pl sl-536) , holder s-17 , lever and shaft lock(price list sl-965) , pump assy prime , propeller (13 in.pitch-std)(sl-498) , propeller s.s (8 in pitch) , handle and shaft assy latch(p-4) , propeller( 8 in pitch) , transon plate (ces sl no 211) , sleeve prop , starter pulley and pin assy (ms sl-22) , universal puller set , cylinder head , power head gasket set (13 nos items)(sl-434) , manifold intake , ring locating , propeller , sp chakeres 15c , propeller shaft(sl-483) , tester s-34 , gear & bushing assy fwd , motor cover 30 hp , timing light/ignition , ignition analyzor , top cowl (black) , c.d unit , motor cover assy , spring winder , carburetor assy(obm 30hp(j) p10) , carburator assy , drive shaft , engine cover assy , carburator assy , crankshaft assembly , carburator assy , rewind starter assy , electric starter kit , wrench-bevel gear b nut , cd volt meter cd-77 , pinion braring remover/installer kit , gear case (1)(3) (ms sl no 125) , gear case assy , engine cover assy

corporations/Associations/Others

CTN :40408876

29 May, 2025 5.00 Lacs

Kanchipuram - Tamil Nadu

Tender For providing of play materials to muthukumaran nagar park ward no2 in poonamallee municipality - supplying and fixing of double swing of height 2.40m height with 40mm dia m.s. pipes support as legs and top bar is 50mm dia. the seat is 9mm thick reinforced rubber with antiskid chequred top with heavy ball bearing and the suspension is 7mm dia electro galvanized chain and the cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers., supplying and fixing of four seater seesaw to a height of 0.50m with 80mm dia leaver and 40mm top bar with m.s. pipes. the seater is of moulded plastic with heavy duty bush bearing. the cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers., supplying and fixing of two seater seesaw for below 12 years old childrens to a height of 0.50m with 50mm dia leaver and 40mm top bar with m.s. pipes. the seater is of moulded plastic with heavy duty bush bearing. the cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers., supplying and fixing of slide for below 12 years old childrens to a length of 3.00m with 80mm dia leaver and 40mm top bar with m.s. pipes. the seater is of moulded plastic. the ladder frame is made up of 25mm m.s.pipe, hanrail 20mm dia m.s. pipe and the centre support is 80mm dia m.s. pipe the cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers., supplying and fixing of jungle gym for below 12 years old childrens to a height of 2.10m with 80mm dia leaver and 40mm top bar with m.s. pipes. the ladder frame is made up of 25mm m.s.pipe, hanrail 20mm dia m.s. pipe and the centre support is 80mm dia m.s. pipe the cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers., supplying and erection of the following outdoor gym materials in public parks for public as per the standard specifications. standing twister, pullup bar, chest press, tai chi spinner

corporations/Associations/Others

CTN :40424251

28 May, 2025 95.5 Thousand

Chandigarh - Chandigarh

Tender For providing and fixing of children play equipment at park near house no.3722 sector -46,chandigarh under m.p.lads (work no.36 18 ls) - m.a.p.s (jumbo 3x1)sr. no. description quantity1 standard see saw 12 double swing 13 wave slide 5 ht. 1area : 4m x 4msafe area : 5m x 5m(jumbo 3 x1) set consist of :standard see saw:this item provides a good entertainer for children. the seats of the see saw are made from rotational molding and the see saw stand is fitted on 40 nb gi pipe. the level is of 15 nb & 25 nb pipes. the bearing used is a heavy-duty bush typedouble swingin the double swing the leg support is bending made of 40nnb gi pipes and top pipe is 50nb gi pipes with gi junction box with powder coating. the swing seat is made up of 10mm thick rubber belt. the belt seat is affixed on 6mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp.wave slide:the wave slide chute shall be made up of 4mm thick of fiber reinforced plastic with self-pigmented. the wave shape should be in such manner that it will not give any jerk or bump to the rider. the chute has its end such as it causes safe landing of the child. the landing portion should be in horizontal with respect to the ground. there should be support provided made up of 25 nb gi pipe., wide slide ssarea : 3m x 1.2msafe play area : 4 m x 2.2 mplatform height : 1.2 mthe wide slide on of the attractive slides of its kind. the chute is made of 14 swg ss/gi sheet. the stainless steel used is of 304 grades. the chute is supported by 40x5 ms angles. this chute is attached to the platform made from ss/g sheet. the platform is supported by 40 nb gi pipe. the ladder is made using 20 nb and 25 nb gi pipes. the steps for the ladder are of 20 nb gi pipes. the sliding height is 2.4m. the landing support used is made up of 25 nb pipe. the handrail of the chute is made up of 20nb power coated gi pipe. the slide is innovative wide slide on which at a time 3 kids can slide., swinging loop rung rec. age : 5-14 yrs.the area : 3.2m x 0.9 msafe play area : 4.2m x 1.9 mthis is another of item that provides hanging as well as swinging experience to the children . the frame is fabricated out using 40 nb and 25 nb powder gi pipes. there are 09 triangles loops of 15 nb which are attached to the top pipe of the frame using s hook. the ladder used is designed to the side support pipe itself.

Roller Chains Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Co-operative

Central Government And Public Sector

corporations/Associations/Others

corporations/Associations/Others