Latest roller disc Tenders | Government roller disc Tenders

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

Central Government/Public Sector

CTN :45297004

29 May, 2026 NA

Bokaro - Jharkhand

Tender For pump w/out motor&base frame(1items) comprising of following: 1 - pump w/out motor&base frame ,

CTN :44721682

27 May, 2026 29.11 Lacs

Indore - Madhya Pradesh

Tender For bid to ras supply of panneling and partitioning work d d - 4 wall panelling pvc panel with thickness 7mm wooden texture , 4mm toughened glass bds with vinyl print photographs and spacers 6 x4 feet , 4mm toughened glass bds with vinyl print photographs and spacers 6x3 feet , 4mm toughened glass bds with vinyl print photographs and spacers 5x3 feet , 4mm toughened glass bds with vinyl print photographs and spacers 4x4 feet , 4mm toughened glass bds with vinyl print photographs and spacers 2x1.5 feet , weather proof 3d murals size 10 x 10 feet mix of resin and fiber glass with antique colour polish finish , plastic planters with base , hanging garden incl frame 8x6 feet along with 48 planters 6 coloumn with 8 planters each , hanging garden incl frame 5 feet ht x 3 feet width working area along with planters , acp aluminium composite panel 4x8 feet with ms pipe frame with metallic ladders of size 8 inch and bayonet insignia ss 304

CTN :45301175

02 Jun, 2026 NA

Palamau - Jharkhand

Tender For supply of machine equipments furniture items in nagar panchayat chhattarpur - executive table made of pre-laminated board (minimum 25 mm top, 18 mm sides), size approx. 7 ft 3 ft or larger, with side storage unit (l-type), drawers with lock, modesty panel, edge banded, termite resistant., ergonomic design, cushioned seat (minimum 40 50 mm foam), hydraulic height adjustment (for revolving chairs), strong base with castor wheels, load capacity 100 kg., visitor chair with cushioned seat and back, strong metal/steel frame with powder-coated finish, ergonomic design, and load capacity 100 kg, suitable for office use.seat size approx. 18 20 inch width with proper back support, non-slip legs or base, durable upholstery (fabric/leatherette), with minimum 1-year warranty, engineered wood cabinet, minimum 4 5 shelves, lockable, size approx. 6 ft height 3 ft width, powder-coated/laminated finish., office backdrop panel made of acp with high-quality printed vinyl or uv print finish, mounted on wall with proper framework, suitable for office branding/display.size as per site requirement, with smooth finish, durable material, and provision for logo/text display.(led backlit option preferred, with concealed wiring), designation board made of acrylic sheet (minimum 5 mm thickness) with uv printed or vinyl lettering, mounted on office backdrop with spacers for raised effect.size approx. 18 inch 6 inch (1.5 ft 0.5 ft) or as per designation length, with smooth finish, durable printing, and proper alignment on backdrop., photo frame made of wooden frame with glass/acrylic front, high-resolution printed photograph, wall-mounted with proper hooks.size approx. 12 inch 18 inch, with durable finish and neat border suitable for office display., indoor ornamental plant in decorative pot, suitable for office environment, low maintenance, air-purifying variety (e.g., money plant, snake plant, or similar), with pot size approx. 6 8 inch diameter, placed on desk/table., office pen stand made of metal material, multi-compartment design, durable and suitable for desk use, with neat finish and standard size., intel core i5 (latest generation 13th or above), 8 gb ram, 512gb ssd (expandable), full hd (21.5 or above) led monitor, keyboard & mouse, pre-installed windows 11 pro and ms office 2021 / microsoft 365 (original licensed), suitable for heavy office/multitasking work, with minimum 3-year onsite warranty (preferred brands: hp, dell, lenovo), color ink tank multifunction printer with print, scan and copy functions, automatic duplex printing, minimum print speed 20 ipm (black) and 10 ipm (color), print resolution 600 1200 dpi, suitable for high-volume office use.should have adf (minimum 30 sheets), support a4/legal sizes, wi-fi, lan and usb connectivity, refillable ink tank system with low running cost, supplied with full ink set, installation, and minimum 1-year onsite warranty. (preferred brands: canon, brother, epson, hp), line-interactive ups with minimum 600 1 kva capacity, pure sine wave output, backup time minimum 15 20 minutes for one desktop system, with overload/short circuit protection and audible alarm.should include built-in battery, led indicators, and support for automatic voltage regulation (avr), with minimum 1-year warranty., height adjustable table-top desk with manual/gas spring lift, sturdy frame, suitable for sit-stand office use, modular workstation units made of pre-laminated engineered wood (minimum 18 mm thickness) with edge banding, sturdy metal frame, and cable management provision, suitable for regular office use.each workstation shall have minimum working size approx. 3.5 4 ft width 2 2.5 ft depth per user, with partition panels, smooth finish, complete fitting/fixing, installation, and commissioning., ergonomic office chair with cushioned seat and back (minimum 40 50 mm foam), mid-back design, breathable fabric/mesh upholstery, and strong metal frame with load capacity 100 kg.should have fixed armrests, stable base without w

CTN :45096943

28 May, 2026 NA

Indore - Madhya Pradesh

Tender For invitation of rates for flex printing and other items for year 2026-27 at nagar parishad rau distt. indore second call all rates should be qouted excluding gst. -flex printing (standard thickness); flex printing (black back, 280 gsm thickness); vinyl printing for stickers, etc. (including cutting); vinyl printing for branding, etc.; vinyl printing on 5mm foam sheet for branding, etc.; vinyl printing on sunpack sheet for branding, cutouts, etc.; sunpack sheet with printing for branding, cutouts, etc.; one-way vision printing and pasting for branding, etc.; eco-solvent vinyl printing for stickers, etc. (including cutting and lamination); eco-solvent vinyl printing on 5mm foam sheet; glow sign boards; acp sign boards (supply) – acp sheet base, ms tubular frame (1.5-inch), with printed retro-reflective media or radium lettering; ms poles for glow sign/acp/acrylic boards; production of various-sized 'handy plates' (handheld placards) for rallies, including handles; production of iron frames (various sizes) – 3 kg heavy-duty (made from 1-inch pipes with adequate support); production of iron frames (various sizes) – 1.5 kg light-duty (made from 1-inch pipes with adequate support); ms standee (folding) supply – size: 6x3 ft; specifications: 280 gsm black back quality, including framing; weight: 3 kg. supply of aluminum roll-up standees (manufactured with heavy-duty iron frames) – size: 6x3 ft, specification: 280 gsm black-back quality; supply of aluminum roll-up standees – size: 6x2.5 ft, specification: 280 gsm black-back quality; canopy size: 4x4x6 ft, specification: flex 280 gsm black-back quality (including stitching and carrying bag); canopy size: 6x6x7 ft, specification: flex 280 gsm black-back quality (including stitching and carrying bag); single-color pamphlets (a4 size) – per lot of 1,000 pieces; multi-color pamphlets (a4 size) – per lot of 1,000 pieces; multi-color posters (18"x23" size) with gumming sticker – per lot of 1,000 pieces; labor charges for flex installation; labor charges for vinyl pasting; installation of various types of glow sign / acp boards (including necessary materials such as concrete, sand, cement, and other supplies), inclusive of labor; labor charges for sunpack sheet installation; a4 size invitation cards (multi-color, with lamination and envelope).

CTN :45318188

09 Jun, 2026 NA

Delhi - Delhi

Tender For supply of stone aggregate 20mm , stone aggregate 10mm , coarse sand zone iii , portland cement opc-43 grade , granular sub-base grade-i , precast rcc rectangular covers 150mm thick , frp gully grating cover with frame size 900x900 mm , frp gully grating cover with frame size 450x450 mm , ehd 560mm dia circular manhole cover with frame , gully grating cover hd- 500x450mm

CTN :45305833

08 Jun, 2026 35.94 Lacs

Faridabad - Haryana

Tender For beautification works in including play equipment, open gym, plantation and repairing of boundary wall at brahampuri park saran village boosting park in ward no. 09 nit faridabad.(recall) - labour charge for making tee connection with existing line excavation, cutting jointing and making connection with existing line complete in all respect, supply and fixing of pvc tee 150x150x150mm dia., chain swing (2seater): 10 l x 6 w x 8 .5 h. horizontal frame and vertical legs is of m.s. pipe 2 x 12 gauge. it stays with m.s. pipe 1 x 12 gauge. swinging seats-2nos is of frp molded seat of 2mm thick fitted with m.s. pipe frame x 12 gauge which hang with m.s. chain 6mm thick duly plated with ball bearing and m.s. flat 6mm thick housing. complete with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division) in multi colors item with gst, transportation, installation with c.c and amp: labor at site., sea saw (4seater): - 8 l x 5 .5w x 15 high. frame is of m.s. pipe 2 x 12 gauge. sitting planks is of m.s. pipe 2 x 12 gauge and its cantilever and handles is of m.s. pipe x 12 gauge. sitting seats 4 nos. is of molded frp material in 3mm thick with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division). complete item with gst, transportation, installation with c.c and labor at site., bridge ladder: 10 l x 2 w x 6 h. horizontal ladder is of m.s. pipe 2 , andamp: vertical ladder is of same material of 12-gauge isi mark with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division). complete item with gst, transportation, installation with c.c and amp: labor at site., merry-go-round (4-seater): 5 dia. main frame is of m.s. sq. pipe 2 x 2 x 14 g and having suitable handle andamp: foot-rest is of round pipe x 12 gauge. central pipe is of m.s. pipe 3 x 12 g with heavy duty shaft 50mm thick andamp: ball bearing assembly. it consists of 4no chair made of molded frp plastic. complete with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division) in multi colors item with gst, transportation, installation with c.c and amp: labor at site., pvc reducer 150mm x 100mm.., frp dustbin (tilting type) of capacity 60 ltr. body is made of moulded fiberglass re-enforced plastic (non- halogen fire retardant resign) of 2mm thick having its lid with handle. it fitted with m.s. square pipe 1.25` x 1.25` x 14 gauge and m.s. flat 50 x 5mm, 30x 5mm base structure with epoxy primer interseal 670 hs and pu finish (interthane 990) paints. complete item with gst. transportation, installation with cc and labor at site., making connection with existing sewer main line, p/f of pvc 100mm dia bend., supply of pvc pipe 150 mm dia with isi mark 8kg.cm2 pressure, supply of good earth complete as per site requirement, p/f chest press is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 32mm nb b class gi-pipe. the handle frame and seat is made of 32mm nb b class gi-pipe. connecting rod is made from 25mm nb b class gi-pipe. seat is made from roto-moulde. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used., p/f seated puller is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 50mm and 25mm nb b class gi-pipe. the handle frame and seat is made of 32mm nb b class gi pipe. connecting rod is made from 25mm nb b class gi-pipe. seat is made from ms sheet of 2mm thick. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used, p/f sky walker is made from is-1239 b class

CTN :45301145

30 May, 2026 35.67 Lacs

Silvassa - Gujarat

Tender For providing and installing furniture in staff quarters of new naroli phc at naroli in ut of dnh. - providing & fixing 3 seater sofa: dimensions w x h x d (cm)- 175 x 83.5 x 80finish color - brownseat height (cm) - 46.5upholstery material - fabricwarranty - 1 year warrantyprimary material - fabricaesthetically pleasing, mid-back designer backrest with tufts and clean stitching. rounded armrests with soft foam seating provide ergonomic comfort. easy-to-clean synthetic leather or fabric for the cool touch and feel., providing & fixing 2 seater sofa: dimensions w x h x d (cm)- 127.5 x 83.5 x 80finish color - brownseat height (cm) - 46.5upholstery material - fabricwarranty - 1 year warrantyprimary material - fabricaesthetically pleasing, mid-back designer backrest with tufts and clean stitching. rounded armrests with soft foam seating provide ergonomic comfort. easy-to-clean synthetic leather or fabric for the cool touch and feel., providing & fixing living room center table: diante coffee table hg mdf afy -diante coffee tablel x w x h 1100 x 600 x 463table-top 18mm thick hmrd board in afyon marbleplt 18 mm thick in black inkconfiguration shelf storage + concealed storag, providing & fixing living room side table: vegas table - 450d - 520h made with precision in urban design, the vegas corner table is a piece of art that can make any space come alive. its bright colour will enliven any interior. place it amongst monotones or other brightlycoloured furniture. the luxurious smooth finish of the base is made of fibre glass reinforced plastic. tempered glass top is stronger and more durable than regular glass, making it a safer choice for interiors. . this petite table can withstand a weight of up to 20kgs., providing & fixing living room tv unit :"overall size:height - 550 mm x width - 1504.0 mm x depth - 450.0 mmmaterial:all the carcass body panels are made of 18 mm thick prelaminated particle boarden312, e1 grade in wood grain shades, with all theedges edge-banded with 0.8 mm. thick pvc lipping.carcass back panel & drawer bottom panels are made of 9mm thick prelaminatedparticle board of en312, e1 grade.door and drawer fronts are made of 18 mm thick, prelaminated particle boarden312, e1 grade in solid shade, with all the edges, edge-banded with 0.8 mm. thickpvc lipping.the bottom leveler frame and legs of the unit are made of 25x25x1.2 and 38x1.2erw tube as per is 7138, with powder coating finish.hardware: high quality hardware used like hinges, roller slides, cam fasteners,dowels, levelers", providing & fixing pooja room mandir: mandir size:length 1180 mm x depth 240 mm x height 1700 mm, kitchen dimensions:providing & fixing kitchen shuttersshutter material shall be 13 mm thick bwp/bwr grade plywood.lamination shall be done on both sides of the shutter with 1.0 mm thick exterior-grade. provide all required hardware fittings (hinges, screws, accessories, etc.) shall be included.fixing of shutters shall be done as per manufacturer s specifications and site requirements.dimensions:4750 mm x 1662 mmarea:85 sq.ft, providing & fixing dining table: dimensions w x h x d (cm) - 175 x 77 x 89.9primary material - rosewood (sheesham)finish color - dark brownnet weight (kg) - 45warranty - 1 yeardelivery condition - knock downstyle - contemporary & modern"overall size :dining chair :length : 45cm width : 45cm height : 95cmcushion seat : length : 45cm width : 45cm height : 50cm ", providing & fixing bed:overall size : length : 206cm width : 190.5cm bed height : 42cm bed with headboard height : 100.8cmbed -metal frame materials & dimensions:(gauge +/-0.1mm): m.s pipe 20x20 (square pipe), 30x5 (draw strip), 25x6 (draw strip), 20x5(draw strip), 8mm draw rnd sariya, 12mm draw rnd pipe. decoration materials & specifications: (density / type) 25mm softy foam, fevicol, 3 ply thermacol, 21x31 poly bag, etc, aventura mat 78 72 5 - 1981.2 l 1828.8w the aventura mattress has a plush euro-top surface with extr

CTN :45275810

28 May, 2026 11.56 Lacs

Panchkula - Haryana

Tender For procurement of furniture for workstation of prefab staff room in pmda office sector 3, panchkula - providing, supplying and placing of workstation chair with cantilever flex system, three position back tilt limiter. seat/back assembly: the cushioned seat assembly consists of seat base moulded in glass-filled poly-amide, moulded polyurethane foam and upholstered with high stretch knitted polyester fabric. the cushioned back assembly consists of back inner moulded in polypropylene in-situ moulded with polyurethane foam and upholstered with high stretch knitted polyester fabric. back size : 45.5 cm. (/w/) x 53.0 cm. (h) seat size : 48.5 cm. (w) x 49.0 cm. (d) high resilience (hr) polyurethane foam: the hr polyurethane foam used in seat and back cushion is moulded in density min 48 kg/m3, and hardness load 15 2 kgf as per is:7888 for 25% compression. tilt mechanism, spines and spine connector: the seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. the cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. the `s` shaped spines moulded in high strength glass-filled poly-amide and the spine connector moulded in glass-filled poly-amide form the back-spine structure involved in multi-dimensional recline motion. the variable tilt angle recline motion can be adjusted with 3 position tilt limit feature which should be inbuilt in seat base and the tension (return force) should be user weight dependent. adjustable armrests: the assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled poly-amide: the height adjustment feature should be button operated having adjustment of 6.6 0.5cm. the armrest top should be made up of integral skin pu moulded over plastic inner moulded in glass-filled poly-amide. pneumatic height adjustment: the seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 0.3 cm . pedestal assembly: the pedestal should be injection moulded in glass-filled poly-amide and fitted with 5 nos. twin wheel castors. the pedestal should be 66.0 0.5 cm. pitch centre diameter and 76.0 1.0 cm. with castors . twin wheel castors :5 nos. twin wheel castos are injection moulded in poly-amide having 5.0 0.1 cm wheel diamter assembled to the pedestal. overall dimensions of chair seat height - min 44.5 to max 53.8 cm. height - min 99.5 to max 108.8 cm. width and depth of chair as measured from pedestal - width-76.0 cm and depth-76.0 cm. the product should be greenguard, griha and iaq certified, providing, supplying and placing of workstation chair with cantilever flex system, three position back tilt limiter. seat/back assembly: the cushioned seat assembly consists of seat base moulded in glass-filled poly-amide, moulded polyurethane foam and upholstered with high stretch knitted polyester fabric. the cushioned back assembly consists of back inner moulded in polypropylene in-situ moulded with polyurethane foam and upholstered with high stretch knitted polyester fabric. back size : 45.5 cm. (/w/) x 53.0 cm. (h) seat size : 48.5 cm. (w) x 49.0 cm. (d) high resilience (hr) polyurethane foam: the hr polyurethane foam used in seat and back cushion is moulded in density min 48 kg/m3, and hardness load 15 2 kgf as per is:7888 for 25% compression. tilt mechanism, spines and spine connector: the seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. the cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. the `s` shaped spines moulded in high strength glass-filled poly-amide and the spine

CTN :45224415

03 Jun, 2026 NA

Kinnaur - Himachal Pradesh

Tender For corrigendum : supply of puf panels 50 mm thick , false ceiling with 8mm thick with cellulose fibre for fixing in 600mm x 600mm grid , pre painted galvalume aluminum steel sheet 0 point 80mm thick , verandah cover with aluminium partitions with 5 point 5 mm thick plain glass , ismb , hollow iron , angle or flat iron or base plate , ms sheet , tmt bars , nut and bolt , door of size 1200x2100 mm , door of size 900x2100 mm , door of size 750x2100 mm , window of size 1200x1200mm , ventilators of size 450x300 mm , fire extinguisher ball 1 point 30kg , curtain rod of size 1 point 30 m length , steel almirah large , smart ortho mattress ultimate back pain relief size 1 point 80 meter length and 0 point 90m wide and 150mm thick , foot scraper , iron foot mat , white cement , looking mirror size 0 point 45x1 point 65m , double bunks ms tubes with 12mm thick , floor mounted hot and cold water dispenser of capacity 20 ltrs , bed side table of size 450mmx300mmx400mm , puf tank 1000 ltrs , plastic dustbins of toughened plastic 120 ltr , stainless steel shoe rack and shoe stand and multipurpose stand 31x24 inch , sealing material , laminated wooden floor 24mm thick wooden ply with 3 mm thick , fd heating device alongwith all accessories , solar light solar street light 24w , septic tank 3000 ltrs with anaerobic soakage pits , ordinary portland cement , coarse sand , stone aggregate 20mm , stone aggregate 40mm , stone aggregate 10mm , vitrified tiles square 600x600x10mm as in floors , non skid tiles square 300x300x8mm as in toilet , stone aggregate 63mm , mcb distribution board db 12 way , mcb sp 32 amps , mcb sp 16 amps , mcb single pole 100 amps , mcb sp 10 amps , lt panel feeder box with complte accessories and 440 volts , die casted bulk head 8 watt , 16 amp modular switch and socket combination with gang box , 16 oblique 6 amp modular switch and socket combination ) /bid number : gem/2026/b/7549916 * /dated: 16-05-2026 & & / bid document 1 / 61 with gang box , modular piano switch 6 amp modular switch , modular piano switch 16 amp modular switch , 16 amp modular socket , modular gang box 12 way , modular gang box 06 way , modular gang box 04 way , modular gang box 03 way , led tube light fitting 4 feet long complete with all accessories , led tube light fitting 2 feet long complete with all accessories , electric geyser 25 ltr , wire flexible twin core 23 oblique 0076 pack of 90m , 1100 v grade frls pvc insulated and unsheathed multi stranded copper conductor of size 2 point 5 sq mm , pvc insulated unsheathed copper cable 4 sq mm multi strand frls , 1100 v grade pvc insulated pvc sheathed copper stranded conductor two core of size 16 sq mm , pvc insulated unsheathed copper cable 6 sq mm multi strand frls , earthing , lightening arrester , gi screw 8 mm x 45 mm full threaded 500 nos , gi screw 8 mm x 25 mm full threaded 500 nos , gi screw 8 mm x 75 mm full threaded 250 nos , pvc insulation tape 19mm width 25m long , cp bib cock 15 mm , cp pillar cock 15 mm , cp stop cock 15 mm bore , cp soap dish , cp towel rail 24 mm dia 600 mm long , vitreous china ceremic floor toilet seat p or s with 10 ltrs capacity flushsing cistern , vitreous china bowl urinal flat back and size of 465 mm x 355 mm x 265mm white including bracket and waste pipe and urinal spreader , ss garting 100mm dia with hole , ss garting 100mm dia without hole , vitreous china wash hand basin with pedestal 58 x 43 point 5 x 82 point 5 cm , cp health faucet with fixing screw and complete set , pvc pipe 110 mm dia , pvc y obliqet junction 110mm dia , pvc socket 110 mm dia , pvc bend 110mm dia , pvc floor trap 75mm dia , pvc pipe 75mm dia , pvc elbow 75mm dia , pvc door bend 75 mm dia , pvc bend 75 mm dia , pvc shoe bend 75 mm dia , pvc t 75mm dia , looking mirror 450 x 600 mm fiber plastic frame , sealing thread

Roller Disc Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector