Latest roller iron Tenders | Government roller iron Tenders

Central Government/Public Sector

CTN :45719686

13 Jul, 2026 44.90 Lacs

Cachar - Assam

Tender For repair/ maint of lt ug cables and its connected items of masimpur mil stn incl army est at khumbigram under masimpur mil stn - e & m division items, dismantling of old unserviceable/damaged acsr or aac conductors of any size , jumper from overhead line & stacking serviceable & non serviceable material separately complete all as specified and directed., dismantling of old unserviceable/damaged stay assembly embedded in concrete including demolition of pcc and removing unserviceable meterials from site of work complete all as specified and directed., dismantling of cross-arms of ms channel or angle of any sections complete all as specified and directed., dismantling of insulators of any size/type complete all as specified and directed., dismantling earth wire or copper conductor/ cradles/stay /service feeder or distribution span complete all as specified and directed, excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable/poles and getting out in soft/loose soil complete all as specified and directed., returning, filling in trenches with soil obtained from excavation including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed., removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all all as specified and as directed., supply and laying burnt bricks of sub-class b of size 230mm x 115mm x 75mm laid in trenches for cable protection complete all as specified and as directed, supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. note: thickness of sand cushioning after punning down will be measured and paid separately., m&l for cutting existing road / pcc drain for taking out / laying of underground cable and including necessary earth work and making good to match with the existing surface with pcc 1:3:6 type ci using 20mm graded aggregates complete all as specified, taking down or out existing cable of sizes 10 sqmm to 70 sqmm 2/3.5/4 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, taking down or out existing cable of sizes 95 sqmm to 300 sqmm 3.5 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :-(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 10 to 70 sqmm 2/3.5/4 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc complete all as directed and specified. note :- lugs and glands will be measured and paid separately., relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 95 to 300 sqmm 3.5 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc compl

CTN :45298008

01 Jul, 2026 NA

Parganas - West Bengal

Tender For bid to ras supply of xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , supply and fixing on load change over switch ss enclosure complete with capacity 200 amp, 415 volt, 4 pole, 50 hz. , supply and fixing sheet metal enclosure spn db double door having facility to fix mcb spn as incomer and mcbs as outgoing, spn 4 ways, ip-43 , supply and fixing sheet metal enclosure tpn db double door having facility to fix mcb tpn as incommer and mcbs as outgoing tpn 4 ways, ip-43 , supply and fixing bus bar chamber 100 amp, 4 way, 415 volts enclosurre is made from crca sheet of thickness 3.15mm crca sheet cover , supply and fixing of straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade nominal cross sectional area not exc.50 sqmm, 3.5 by 4 core , supply and fixing straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade cross sectional area 240 sqmm to 300 sqmm, 3.5 core. , supply and fixing end termination epoxy cable joint kit including jointing materials for making joints of ug electric cable 1100 v grade nominal cross sectional area 240 sqmm to 300 sqmm, 3.5 core , supply and fixing of galvanised iron pipe 100 mm bore dia light grade for protection of ug cable , supply of digging nad layingg in excavation trenches not exc. 1.50 m wide and not exc. 1.50 m in depth, complete all as specified and directed. , returning, filling in including spreading, levelling, watering and well ramming in layers not exc. 250 mm in soft loose soil , supply and fixing of galvanised iron pipe 40 mm bore dia light grade for protection of ug cable , supply, installation, commissioning and testing including providing all necessary electrical connection,lt feeder panel board of size 1.0 m x 0.6 m x ) /bid number : gem/2026/b/7568567 * /dated: 22-05-2026 & & / bid document 1 / 30 & & ' ' /item category 0.5 m , supply, installation, commissioning and testing including providing all necessary electrical connections lt feeder panel board of size 0.6 m x 0.6 m x 0.5 m , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick.complete all as specified and directed in boq spec file , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick. complete all as specified and directed in boq spec file , supply and fixing of sub-class b brick, well burnt, laid breadth-wise along the axis of cable laid in trenches over sand cushion laid for ug cable protection, complete all as specified and directed. , supply and fixing horizontal boring under a depth of 0.65 m from the gl for passing pipe upto 40 mm bore dia , supply of digging and laying of removing excavated materials soils not exc. 50 m and depositing where directed at a level not exc.1.50 m , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 300 sqmm including bricks, gi pipes etc. , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 50 sqmm 3.5 core including bricks, gi pipes etc. , supply of digging and laying of sand cushioning dry in trenches for protection of ug cables below, above and around the ug cable laid in trenches of 230 mm spread thickness , cutting road by hard standing and making good disturbed surfaces by using pcc type-c2,1-3-6 by using 40 mm graded stone aggregate , boring of holes under road,pavement,hard standing by trenchless technology using ultra sounding technique including hdpe pipe 150 mm dia suitable for 0.4 mpa working pressure , cutting chases, chipping in making good to facings, where required and pointing in cement mortar 1- 3 to ends or edges of landings, steps, sills, sunshades, shelves, lintels etc. , submain wiring comprising single core 2 runs of 6 sqmm nominal coss sectional area frlh

CTN :45478137

01 Jul, 2026 NA

Vidisha - Madhya Pradesh

Tender For corrigendum : items - computer and servises and otheres, mcb (miniature circuit breaker), acb (3200a/4000a ), acb (air circuit breaker), allen key set, amf relay, ammeter, annunciation system, anti-corrosion spray, arc flash suit, arc flash suit (ht/lt panel ), auxiliary contacts, avr (automatic voltage regulator), battery charger, blower/air blower, breather assembly, bus coupler acb, busbar insulators, busbar supports, cable glands, cable glands, cable lugs, cable ties, cable ties, changeover switch, clamp meter, clamp meter, combination pliers, consumables, contact cleaner spray, contactor, continuity tester, control cable, control fuses, control relay, control wires, cooling fan, copper busbar, crimping tool, ct (current transformer), current transformer (ct), dg set synchronization panel (3 750 kva), digital multimeter, digital multimeter, discharge rod, earth fault relay, earth switch, earth tester, earthing rod, electrical contact cleaner, electrical gloves (11 kv rating), electrical safety gloves, emergency stop switch, energy meter, engine control module, face shield, ferrules, ferrules, flexible wire, frequency meter, fuse fuse base, heat shrink sleeves, heat shrink tubes, hrc fuse, hrc fuses, ht protection relay, indicator lamps (r/y/b), infrared thermometer / thermal camera, insulated screwdriver, insulation tape, isolator switch, lightning arrester, load sharing module, lockout-tagout (loto) kit, loto kit, lt pcc/mdb panel, lubricant spray ( ), lugs, maintenance tools, mccb, mccb (molded case circuit breaker), megger (insulation tester), megger 5 kv, microfiber cloth, motorized mechanism, multifunction meter, multifunction meter, nose pliers, numerical protection relay, oti (oil temperature indicator), over current relay, overload relay (olr), phase sequence meter, phase sequence tester, plc module, power analyzer, power cable, power factor meter, protection & metering, pt/vt (potential transformer), push buttons (start/stop), pvc insulation tape, reverse power relay, rust remover, safety equipment, safety goggles, safety helmet, safety helmet, safety shoes, safety shoes, screwdriver set, secondary injection test kit, selector switch, shunt trip coil, side cutter, silica gel, smps (power supply), soft brush, spanner set, speed governor module, spiral wrapping, spring charging motor, starting relay, synchronizing relay, terminal blocks, thermal camera, thermostat, timer relay, torque wrench, transformer buchholz relay, transformer oil, under/over frequency relay, under/over voltage relay, uv coil, vacuum cleaner, vcb (vacuum circuit breaker), voltage tester, voltmeter, wire markers, wire stripper, wti (winding temperature indicator), , , , comprehensive maintenance of substation, transformer, panels, synchronization panel a including all consumables, accessories, minor & majour spares, cleaning materials, testing instruments, preventive maintenance and breakdown maintenance complete., annual maintenance of substation, transformer, panels, synchronization panel a including all consumables, accessories, minor spares, cleaning materials, testing instruments, preventive maintenance and breakdown maintenance complete.

Corporations And Associations And Others

CTN :45363921

03 Jul, 2026 NA

Gurdaspur - Punjab

Tender For corrigendum : supply of spares for instrumentation - "vfd pannel signal isolatorsr. no. 2306042013 make - multispampower supply ac 230 vi/p - 4 to 20 ma dco/p - 4 to 20 ma dcreguire boiler + mill + boiling house ", ash handling air pneumetic vibrator, pu elbow 1/4" one side thread - 10 mm, pu tee 1/4" one side thread - 10 mm, air filter 1/4" -10 mm, pu femal connector 1/4" - 10 mm, pu pipe-10 mm, sov double action 230 v ac 1/4", quick exhaust valve 1/2" cylinder, quick exhaust valve 1/4" for seal, "simens smart positioner sipart ps26 drs 110-0nn0- 0aa0ip 66/type 4xp- 1.4 to 7 barta- 30 dg c to +80 dg c", "dome power cylinder for ash handling model no. c 0631505sr. no. plt 20815/005 bore size 63mmstroke- 305 mmmake- duncam engineering limited (rnoia)", " turbine asco solonoide valve (red had type)brand ascotype - solonoide valve (electrno megnetic) 110 v dc", "limit switchmod no. lswp -1-02-4-a", "cesar bonettitype directional control valvesize / model- nf2pan 520 n00000", "valve limit switch box/ position monitormodel code klplubtg/16/05-26ingress protection- ip67 certifiedvoltage- 110 vdc", "wiring diagram explanation (013)type- close position switch", "product - cee em-45 limit switch model /type - cee em -45-50brand-jai bala ji", "pressure switch (switzer) model no. gm-201-33-b030-55-apressure range 0.4 to 4 bar", "proxy meter sensorsr. no. 23 h01p90output- 7,87 v/mm (200 mv/mil)w/o- 2456make - bently nevada", "siemens smart positioner sipart . ps26dr5 110-0nn0-0aa0ip 66/type 4xpr 1.4 to 7 barta 30 dgr c to +80 dgr c", "m00g pi servo amplifier ( valve driver)supply voltage - 24 vdccurrent 1 to 2 a", "signal conditioner/ isolatermake- pepperl +fuchs model - kfd2- stc5-1.20type- signal isolator/signal conditioner", boiling house hi tech m/c chennai bag clamping power cylinder with o ring kit, bag clamping rubber pad, limit switch for clamping, "plc omran dc - 12 v to 24 v zen 10 c dr - d- v2", smps (power supply 24 v), relay board channels, contector, controller unipluse f 701-s, pu connectors, male 1/4" - 8 mm, push button element no-nc, air filter regulator (afr) (0-10 bar), afr connectors, "load cell 110 kgmodel- 65023-110k-nc-02x make- vishay", proxy for load bucket, load bucket cylinder with kit o ring make janties, course fine cylinder with o ring kit make janties, sov ( solonoide valve) with base and coil make janties coil 220 v ac, coil only 220 v ac, load cell card hi- tech engineers, half inch ball valve (1/2"), "centrifugal machine (raw and refinery) afr (air filter regulator )connector femel - 3/8"" make janties ", "break limit switch make bch electric limited", solenoide valve (sov) single acting single coil with o ring kit, double acting double coil with coil 230 v ac and o ring kit, double acting single coil with coil 230 v ac and o ring kit make energy tech high tech pneumatic, coil 230 v ac for sov, hand operated pnumatics sov wtp high tech engineering, proxy type pnp supply 10-30 v type ps 2000 d make joy shree pune, pug mill valve sheet ( on/ off) size - 300 mm make aira, syrup seperator valve (on/ off) size 150 mm make - i& s system dehradun, r- valve pnumatic 1/4", boiling house refinery mbf control valve- 3" rubber seat, mbf on/off valve- 4" rubber seat, mbf on/off valve- 6" rubber seat, mbf on/off valve 3" rubber seat, melt concentrator 2" rubber seat hot water valve , 0-150 dgr c rtd pt-100 temp transmitter (tt), refinery ph electrode with transmitter, abb flow meter 3" model no. fep 63 y0a20080 a size 3", melt concentrator control valve 12" rubber seat , melt concentrator control valve 10" rubber seat , level transmitter (lt) make abb range 0-5000 mmwc remote seal type, control valve positioner make rotex model rtx 1000 -r-d-2-r1-2g-4r-nd-c-41 serial no. rtx/22/0873, multimeter make fluke, loop calibrator / milium source make masi bus, boiling house and boiler compressor k smart oil 200 l , oil filter element 150 lpm, air filter element, air oil seprator element kit, gasket , air oil seperator ele

corporations/Associations/Others

CTN :45683923

09 Jul, 2026 NA

Sindhanur - Karnataka

Tender For auction sale of 25kva transformer with winding & without oil,63kva transformer with winding & without oil,100kva transformer with winding & without oil,ms iron material,released steel from rcc poles skeleton etc.,,angle iron material, lt protection kit & scrap ab cable,single phase meter qty:182 nos,scrap 2/4/rabbit conductor & rabbit acsr conductor,ht metering cubical box,ct & pts,secure meters

CTN :45675375

09 Jul, 2026 NA

Multi City - Bihar

Tender For auction sale of others - 1 scrap battery plate 105 nos. 2 scrap nylon hand bag containing 1 no. lt motor , 500 volt mark w acd and one electric bulb of 60 volt- 1 no. 3 liquid level cum moisture indicator 2 nos. 4 temperature sensor fa 3 nos. 5 temperature sensor fa /ra 10 nos. 6 cleaning agent 510-d, return filter and fresh cassette filter 86 nos. 7 released supply air duct complete with frame associated accessories 20 nos. 8 scrap carriage fan ac (95-135 volt), 400 mm sweep 47 nos. 9 set of 2 nos. return air duct complete with frame 7 nos. 10 mpcb for ventilation fan unit 29 nos. 11 mpcb for compressor unit range 16 amp 13 nos. 12 mpcb for condenser fan unit range 2.5 amp 15 nos. 13 fresh air duct complete with frame and associated accessories. 4 nos. 14 contactor for 60 kva transformer 4 nos. 15 feeder contactor 750 vo9lt 200 amp for net-1 & 2 2 nos. 16 thermostat switch 4 nos. 17 axle pulley 4.5 kw, 13 ton 4 nos. 18 berth light fittings 5 nos. 19 vane relay 9 nos. 20 control transformer 10 nos. 21 control harness, male portion 7 nos. 22 condenser fan 25 nos. 23 16 amp contactor 44 nos. 24 copper capillary with strainer 8 nos. 25 overload protection relay 39 nos. 26 timer (0.5 to 180 sec) 27 nos. 27 isolation transformer, 415 v/110 v, 500 va 5 nos. 28 control harness ( 2.5 mtr complete with 37 pin) 2 nos. 29 accumulator 3 nos. 30 contactor, 30/32 amp 36 nos. 31 mcb, 2, 6, 10 & 16 amp 53 nos. 32 ohp cutout 65 nos. 33 power cable harness including all wires 3 nos. 34 rotary switch 40 amp 74 nos. 35 mobile charging point 125 nos. 36 ballast for 11 w cfl 69 nos. 37 water pump 1 no. 38 non-return valve 2 nos. 39 ¿ c- check kit 29 nos. 40 valve guide 8 nos. 41 intake valve 12 nos. 42 mcb 32 amp 19 nos. total battery plate - 5565 kg, ferrous 245 kg

State Government

CTN :45640057

06 Jul, 2026 70.00 Lacs

Patti - Punjab

Tender For supply of fuse set from esc mnp , carriage of 11 kv tpmo with polymer insulator from esc mnp , carriage of complete stay 9gi stay rod 20x1800 mm etc material from esc mnp , carriage of distribution transformer 25 kva from esc mnp , carriage of distribution transformer 63 kva from esc mnp , carriage of distribution transformer 100 kva from esc mnp , carriage of distribution transformer 250 kva from esc mnp , carriage of acsr weasel conductor from esc mnp , carriage of m s earthing rod 20 x2540 mm from esc mnp , carriage of lt al. xlpe cable size 1x240 sq.mm. from esc mnp , carriage of lt xlpe cable 1x120 sq.mm. for dtr from esc mnp , carriage of lt xlpe cable 1x400 sq.mm. for dtr from esc mnp , carriage of lt xlpe cable size 3.5x70 or 35 sq.mm. from esc mnp , carriage of lt ab cable 3x120 1x95 1x16 sq.mm. from esc mnp , carriage of lt ab cable 3x50 1x35 1x16 sq.mm. from esc mnp , carriage of lt ab cable 3x95 1x70 1x16 sq.mm. from esc mnp , carriage of 33 kv xlpe cable 3x300 sq.mm. from esc mnp , carriage of 33 kv indoor or outdoor jointing kit size 3x300 sq.mm. from esc mnp , carriage of 33 kv straight through size 3x300 sq.mm. from esc mnp , carriage of g.i. wire 6 or 8 swg for guarding from esc mnp , carriage of three phase distribution box from esc mnp , erection of fixing of lt fuse set protection box with all respective accessories as per norms , execution of chemical earthing with g.i. patti clamp nut and bolts as per norms , erection of l.t. tail less unit with all respective material as grouted angel with fabrication work etc. , laying of acsr weasel conductor , laying of lt ab cable 3x120 1x95 1x16 sq.mm. , laying of lt ab cable 3x50 1x35 1x16 sq.mm. , laying of lt ab cable 3x95 1x70 1x16 sq.mm. , mounting of three phase distribution box , erection of double pole structure 8.5 mtr pcc pole , erection of single pole structure 8.5 mtrs pcc pole , erection of tri pole structure 33 kv 13 mtr st pole , grouting of pcc or stp pole , grouting of stay , earthing of pole , guarding of 11 kv line , fencing of 250 kva distribution transformers , plinth for 250 kva transformer , installation of 11by0.4 kv tf 25 kva , installation of 11by0.4 kv tf 63 kva , installation of 11by0.4 kv tf 100 kva , installation of 11by0.4 kv tf 250 kva , laying of 33 kv xlpe cable 3x300 sq.mm. , installation of 33 kv indoor or outdoor jointing kit size 3x300 sq.mm. as per norms. , dismentlling, received back and safe carriage of jarjar g.i. wire and weasel conducter including with rolling from pit site to esc, mainpuri , received back of distribution transformer after increasing capacity from pit site to esc, mainpuri

CTN :45598335

26 Jun, 2026 2.00 Lacs

Dewas - Madhya Pradesh

Tender For rate of building materials for year 2026-27 tonkkhurd dewas m.p. - moorrum(hard copra), cement opc 33 grade 50 kg bag, cement opc 43 grade 50 kg bag, cement opc 53 grade 50 kg bag, cement ppc grade 50 kg bag, sand river, sand manufactured (m. sand), gravels 6 mm, gravels 20 mm, gravels 40 mm, steel bar 6 mm, steel bar 8mm, steel bar 10 mm, steel bar 12 mm, steel bar 16 mm, steel bar 20 mm, sdbc (bitumin concrete), tractor on rent, road roller, iron jali making, rectangular pipe 2"x2", rectangular pipe 1.5"x3", rectangular pipe 3"x3", rectangular pipe 4"x4", rectangular pipe 1"x1", iron net, angle 1.5

CTN :45557243

25 Jun, 2026 NA

Hisar - Haryana

Tender For supply of volts ac 3 phase 4 wire system with builtin amf panel sound proof canopy and foundation etc as per oem recommendations , sitc of 11 kv 630 amps outdoor type 5 way rmu ring main unit comprising of 02 nos load break switches and 03 nos 630 amp vcbs complete as per oem recommendations , sitc of 400 kva cap 11 kv and 433 v ac 3 phase 50 hz outdoor type step down transformer double copper wound oil immersed onan vector group dyn 11 and conforming to eel - 3 as per is - 1180 part - i , m and l for construction of platform for transformer galvanised chain link fencing 1 mtr wide pcc along the fencing 1 mtr wide steel gate gravels danger notice plate all as per description , m and l for earthing with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick including galvanized iron earth strip 25 x 4 mm complete , sitc of lt panel out door type cpri approved out door type with 01 no incoming 630 amp acb and 2 no 630 amp outgoing mccbs complete all as per description , supply laying and testing of 11 kv ht xlpe insulated screened pvc bedded armoured electric power cable with aluminium conductor of sizes 3 core 95 sqmm complete all as per description , s and f heat shrink type outdoor termination cable jointing kit for 11 kv 3 core xlpe armoured aluminium conductor cable of size 50 sqmm to 95 sqmm complete all as per description , s and f heat shrink type indoor termination cable jointing kit for 11 kv 3 core xlpe armoured aluminium conductor cable of size 50 sqmm to 95 sqmm complete all as per description , supply laying and testing 1100 volts grade xlpe insulated and pvc sheathed armoured multistrand aluminium conductors cable of size single core 630 sqmm complete all as per description , boring of hole under road or pavement or hard standing suitable for passing of gi or dwc pipe upto 150 mm bore and making good complete all as per description , s and f gi pipe 100mm bore steel tube light grade with all fittings complete all as per description , excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth for laying of cable etc and getting out in soft or loose soil complete all as per description , m and l for sand cushioning 230 mm thickness with dry sand and punned down to 180 mm in trenches for protection of cable complete all as per description , m and l for brick covering to underground electric cable using sub class b bricks complete all as per description , supplying and laying un - reinfoced precast concrete cable cover of class hv type 1 with flat size 300 x 180 x 40 mm complete all as per description , m and l for returning filling in approved excavated soil including spreading levelling and well ramming in layers n.exc 25 cm thick complete all as specified and directed , m and l for removing surplus soil to a distance not exceeding 50 m and depositing at a level not exceeding 1.5 m above the starting point complete all as specified and directed , supply and fixing in vertical position pre stressed concrete pole conforming to is -1678 of 11 mtr long 152 mm x 152 mm at top and 152 mm x 260 mm at bottom class 9 complete all as per description , m and l for cross arms bracings supports clamps eye hook and back plates fabricated from structural steel sections complete all as per description , sitc gang operated air break switch mounted on insulators ht 11kv 200 amps rating triple pole fifteen insulator suitable for vertical mounting complete all as per description , m and l for lightning arresters expulsion type complete with all fittings transmission class discharge capacity 65 kilo amps 11000 volts complete all as specified and directed , m and l for pcc 1 ratio 4 ratio 8 type d - 2 //bid details 2 / 28 using 40 mm graded stone aggregate in mass concrete and filling complete for foundation complete all as specified and directed

State Government

CTN :45261763

15 Jun, 2026 70.00 Lacs

Patti - Punjab

Tender For corrigendum : supply of carriage of distribution transformer 25 kva from esc mnp , carriage of distribution transformer 63 kva from esc mnp , carriage of distribution transformer 100 kva from esc mnp , carriage of distribution transformer 250 kva from esc mnp , carriage of acsr weasel conductor from esc mnp , carriage of m s earthing rod 20 x2540 mm from esc mnp , carriage of lt al. xlpe cable size 1x240 sq.mm. from esc mnp , carriage of lt xlpe cable 1x120 sq.mm. for dtr from esc mnp , carriage of lt xlpe cable 1x400 sq.mm. for dtr from esc mnp , carriage of lt xlpe cable size 3.5x70 or 35 sq.mm. from esc mnp , carriage of lt ab cable 3x120 1x95 1x16 sq.mm. from esc mnp , carriage of lt ab cable 3x50 1x35 1x16 sq.mm. from esc mnp , carriage of lt ab cable 3x95 1x70 1x16 sq.mm. from esc mnp , carriage of 33 kv xlpe cable 3x300 sq.mm. from esc mnp , carriage of 33 kv indoor or outdoor jointing kit size 3x300 sq.mm. from esc mnp , carriage of 33 kv straight through size 3x300 sq.mm. from esc mnp , carriage of g.i. wire 6 or 8 swg for guarding from esc mnp , carriage of three phase distribution box from esc mnp , erection of fixing of lt fuse set protection box with all respective accessories as per norms , execution of chemical earthing with g.i. patti clamp nut and bolts as per norms , erection of l.t. tail less unit with all respective material as grouted angel with fabrication work etc. , laying of acsr weasel conductor , laying of lt ab cable 3x120 1x95 1x16 sq.mm. , laying of lt ab cable 3x50 1x35 1x16 sq.mm. , laying of lt ab cable 3x95 1x70 1x16 sq.mm. , mounting of three phase distribution box , erection of double pole structure 8.5 mtr pcc pole , erection of single pole structure 8.5 mtrs pcc pole , erection of tri pole structure 33 kv 13 mtr st pole , grouting of pcc or stp pole , grouting of stay , earthing of pole , guarding of 11 kv line , fencing of 250 kva distribution transformers , plinth for 250 kva transformer , installation of 11by0.4 kv tf 25 kva , installation of 11by0.4 kv tf 63 kva , installation of 11by0.4 kv tf 100 kva , installation of 11by0.4 kv tf 250 kva , laying of 33 kv xlpe cable 3x300 sq.mm. , installation of 33 kv indoor or outdoor jointing kit size 3x300 sq.mm. as per norms. , dismentlling, received back and safe carriage of jarjar g.i. wire and weasel conducter including with rolling from pit site to esc, mainpuri , received back of distribution transformer after increasing capacity from pit site to esc, mainpuri

Roller Iron Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Corporations And Associations And Others

corporations/Associations/Others

State Government

State Government