Latest roller spares Tenders | Government roller spares Tenders

State Government

CTN :45568362

23 Jun, 2026 NA

Lakhandur - Maharashtra

Tender For supplying various type of construction and watersupply material at gp dokesarandi - 80 mm. metal white-(hand broken metal) with royalty, 40 mm metal white- (hand broken metal) with royalty, 40 mm metal black- (crusher broken metal) with royalty, 20 mm metal black- (crusher broken metal) with royalty, 12 mm metal black-(crusher broken metal) with royalty, 6 mm metal black-(crusher broken metal) with royalty, boulders rubbles and masonary stones, sand river (unscreen) with royalty, sand (nallah bed), soft murum with royalty, hard murum with royalty, soil, cement 53 grade opc, cement 53 grade ppc, burnt bricks ( ii class), fly ash bricks, mild steel bars of various sizes, tmt steel bars of various sizes, rollar per day with desel driver, meter stone, ferlong stone, jcb per hours, centring tar, bitumen pack tin 60/70 at mumbai, murum carting only, weste material carting, mixter machine per day with desel and driver, water tanker with desel and driver, centring rent for drain work, centring rent for cement road, centring rent for building work, rcc pipe with cooler (1200 mm), rcc pipe with cooler (900 mm), rcc pipe with cooler ( 600 mm), rcc pipe with cooler (450 mm), rcc pipe with cooler (300 mm), compaction of earth work in embankment upto layer of 30cm comp machinary charges only, compaction of soft murum/ kankad 2.00 to 7.00 width (200mm loose) with static roller including necessary artificial watering etc complete, transporttion of soft murum on road side etc complete as per analysis, information board 1)size 1.20 x 0.90 , information board 2) size 0.75 x 0.90, transportation of excavated soil from ex-mat. tank to field up to 3km, wooden door frame size 6 * 3.25, cement door frame size 6*3.25, wooden door size 6 * 3.25, plywood door size 6 * 3.25, door kits per door, precost sheet, teen sheet( patra), profile sheet, wc sheet, oil engine, febrication work, griil work, murga, pavour block(gattu), pavour block(gattu) rubber mould, kota stone, vetryfied tyles, ceramic tiles, bt pod, wc pod, nutri trap, ms poor, ac sheet, gi sheet, distemper, birla white, oil paint isi mark, plastic emulsion paint, wall paint isi mark, torpin oil, handwash basin, urinal sheet, toilet sheet, water roof cement paint, alluminiam window, plastic water tank, ms steel door, dr. fixit, 250mm pvc pipe 6 kg, 250mm pvc pipe 4 kg, 200mm pvc pipe 6 kg, 200mm pvc pipe 4 kg, 110mm pvc pipe 6 kg, 110mm pvc pipe 4 kg, 90mm pvc pipe 6 kg, 90mm pvc pipe 4 kg, 75mm pvc pipe 6 kg, 75mm pvc pipe 4 kg, 63mm pvc pipe 6 kg, 63mm pvc pipe 4 kg, sluice valve 80 mm, sluice valve 125 mm, sluice valve 150 mm, sluice valve 200 mm, sluice valve 80 mm, air valve 50 mm, air valve 80 mm, air valve 50 mm, reflux valve 80 mm, gi pipe verious size, pvc special tee,bend,coupler,taispeace,pipe, gi special hang, nutbolt,rubber shocate, tee, bend, soletion, gi fencing (chain link fencing) 4 ft., gi fencing (chain link fencing) 5 ft., gi fencing (chain linkfencing) 6 ft., pump 5 bhp 200 mm & 120 mm head, pump 20 bhp 200 mm & 120 mm head, gi bend verious size, gi coupller verios size, control panal box, steel perling (engle), primer, plywood sheet, bliching powder isi mark, pitkari (turti), in well boar 4.50 inch, in well boar 6.0 inch

Central Government/Public Sector

CTN :45592841

24 Jun, 2026 NA

Bengaluru - Karnataka

Tender For auction sale of others - condemned, unserviceable, underaged x ray baggage inspection system xbis model rap-627xr sl no. 6171122 (entry/exit roller table, monitor, key board with table, lcd monitor, stabilizer) total qty: 1 by lot. (1) on as is where basis under the custody sr.dsc/rpf/sbc as declared vide ds-08 no. 2601-07 dt 11.04.26. (2) location: at platform no. 6 tk end ypr railway station, bengaluru karnataka (3) delivery on by lot basis only. (4) dismantling/cutting: permitted to lorry loadable size. (5) road approach- lead of 200 metres. (6) only recyclers/pre-processors registered with the central pollution control board (cpcb) or state pollution control board (kspcb) possessing a valid authorization certificate are eligible to participate/bid for the lot. (7) the weight composition is purely indicative and approximate. no claims or variations in financial value will be entertained regarding variations in the actual material composition proportions. (8) purchaser must arrange for safe dismantling without causing any structural damage to the railway building, flooring, or surrounding utilities. any damage caused will be recovered from the purchaser¿s security deposit. (9) witnessing officials must physically/digitally verify that the purchaser holds a valid, unexpired license for handling hazardous electrical/electronic and heavy metal waste (cpcb/kspcb guidelines). purchaser has to remove all components associated with the lot¿including the heavy structural frames, peripheral rollers, monitors, cpus, and specifically the insulating oils- leaving the site clean. the purchaser should not be allowed to cherry-pick high-value items (like copper or lead) and leave the low-value plastic or steel shell behind. (10) custodian: /o/sr.dsc/rpf/sbc (9448319344).

State Government

CTN :45562938

22 Jun, 2026 NA

Ranchi - Jharkhand

Tender For stone boulder of size 150 mm and below at source quarry supply of quarried stone 150-200 mm size for hand broken at source quarry boulder with minimum size of 300 mm for pitching at source quarry coarse sand i) at source coarse sand ii) at source fine sand at source quarry moorum at source quarry gravel/quarry spall at source quarry granular material or hard murum for gsb works at source quarry fly ash conforming to is:3812 (part ii & i) at hmp plant/batching plant/crushing plant filter media/filter material as per table 300-3 (mort&h specification) at crusher. close graded granular sub-base material 53 mm to 9.5 mm/4.75mm at crusher. close graded granular sub-base material 37.5 mm to 9.5 mm at crusher. close graded granular sub-base material 26.5 mm to 9.5 mm at crusher. close graded granular sub-base material 9.5 mm to 4.75 mm at crusher. close graded granular sub-base material 9.5 mm to 2.36mm at crusher. close graded granular sub-base material 4.75mm to 2.36mm at crusher. close graded granular sub-base material 4.75mm to 75 micron at crusher. close graded granular sub-base material 2.36 mm & below at crusher. stone crusher dust finer than 3 mm with not more than 10% passing 0.075 mm sieve at crusher. coarse graded granular sub-base material 2.36 mm & below at crusher. coarse graded granular sub-base material 4.75 mm to 75 micron at crusher. coarse graded granular sub-base material 4.75mm to 2.36 mm at crusher. coarse graded granular sub-base material 9.5mm to 4.75 mm at crusher. coarse graded granular sub-base material 26.5mm to 4.75 mm at crusher. coarse graded granular sub-base material 26.5 mm to 9.5 mm at crusher. coarse graded granular sub-base material 37.5 mm to 9.5 mm at crusher. coarse graded granular sub-base material 53 mm to 26.5 mm at crusher. aggregates below 5.6 mm at crusher. aggregates 22.4 mm to 2.36 mm at crusher. aggregates 22.4 mm to 5.6 mm at crusher. aggregates 45 mm to 2.8 mm at crusher. aggregates 45 mm to 22.4 mm at crusher. aggregates 53 mm to 2.8 mm at crusher. aggregates 53 mm to 22.4 mm(grade iii) at crusher. aggregates 63 mm to 2.8 mm at crusher. aggregates 63 mm to 45 mm (grade ii)at crusher. aggregates 90 mm to 45mm(grade i) at crusher. aggregates 10 mm to 5 mm at crusher. aggregates 11.2 mm to 0.09 mm (key aggregate type b) at crusher. aggregates 13.2 mm to 0.09 mm (key aggregate type a) at crusher. aggregates 13.2 mm to 5.6 mm at crusher. aggregates 13.2 mm to 10 mm at crusher. aggregates 20 mm to 10 mm at crusher. aggregates 25 mm to10 mm at crusher. aggregates 19 mm to 6 mm at crusher. aggregates 37.5 mm to 19 mm at crusher. aggregates 37.5 mm to 25 mm at crusher. aggregates 6 mm nominal size at crusher. aggregates 10 mm nominal size at crusher plant. aggregates 13.2/12.5 mm nominal size at crusher plant. aggregates 20 mm nominal size at crusher plant. aggregates 25 mm nominal size at crusher. aggregates 40 mm nominal size at crusher. crushing of stone aggregates (gsb crusher run) ac pipe 100 mm dia acrylic polymer bonding coat alluminium paint aluminium alloy plate 2mm thick aluminium alloy/galvanised steel aluminium sheeting 2mm thick fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable class-b type iv road aluminium stud with micro prismatic lens reflectors (with shank) 100 x 100 mm barbed wire bearing (cost of parts) bearing (cast steel rocker bearing assembly of 250 tonne ) road studs 100x100mm fitted with lense reflectors vide clause cl 804.2 of morth (5th revision) bearing (elastomeric bearing assembly consisting of 7 internal layers of elastomer bonded to 6 nos. internal reinforcing steel laminates by the process of vulcanisation) taking elastomeric bearing of size 500 x 400 x 96mm, overall volume=19200 cubic cm bearing (forged steel roller bearing of 250 tonne) bearing (pot type bearing assembly consisting of a metal piston supported by a disc, pt

corporations/Associations/Others

CTN :45567694

23 Jun, 2026 NA

Pithoragarh - Uttarakhand

Tender For auction sale of 2 nos of elvs backhoe loader & road roller reg. no. 2057 & 9288

CTN :45565907

23 Jun, 2026 NA

Vapi - Gujarat

Tender For supplying of materials and supplying and spreading of materials at various places of vapi municipal area. annual rate 2026-2027 - supplying of yellow earth, garden soil at site as directed., supplying of hard murram at site as directed., supplying of coarse clean sharp sand at site as directed., supplying of crushed stone aggregates, chippings etc. of disintegrated pieces, eletatrious and organic matter (for bitumen surface dressing etc.) and grading as per i.r.c.code., (i)10 mm to 40 mm size m/c metal, (ii)6 mm to 10 mm size grit., (iii) 40 mm to 90 mm size metal, (iv)9 thick rubble, supplying bricks., supplying of granular sub base by providing coarse graded material, mixing by mix in place method with rotavator at omc, with grading material of 53 mm to 26.5 mm size @35 percent,26.5mm to 4.75 mm @ 45 percent and 2.36mm below @ 20 percent at site as directed., providing wet mix base course maximum 200 mm thick using machine crushed b.t. chips as per required gradation mixing with required optimum quantity of water conveying the mix to site of work, including cost of materials labour plant and equipment etc complete, construction of granular sub-base by providing coarse graded material(metal), spreading in uniform layer on prepared surface mixing by mix in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density, etc, complete as directed by engineer in charge., providing and laying wet mix base course maximum 150 mm thick using machine crushed b.t. chips as per required gradation mixing with required optimum quantity of water conveying the mix to site of work, spreading into grade and camber with mechanical paver and consolidation with vibratory road roller including cost of material labour plant and equipment etc complete as directed by engineer in charge., supplying and spreading of following materials at site as directed by engineer in charge including rolling and consolidation with vibratory roller as directed by enigineer in charge., (i)10 mm to 40 mm size m/c metal, (ii)6 mm to 10 mm size grit., (iii)40 mm to 90 mm size metal, (iv)9 thick rubble, supplying and spreading hard murram including rolling and consolidation with vibratory roller as directed by enigineer in charge., note:- all rate are required compulsory

CTN :45540400

19 Jun, 2026 NA

Parganas - West Bengal

Tender For spare parts for kraz veh - pipe assy air cyl to brak valveof frt br part no 256b13506241, pipe assy from air cyl to brake valve of part no 256b13506245, pipe assy from air cyl to manual c/valve part no 255b13506255, pipe assy from air cyl to single safety part no 255b13506249, pipe assy from anti freeze evaporator to part no 255b1350620710, pipe assy to horn part no 255bt3721045a, pipe assy to lh front brake cyl part no 255b13506281, plug drain cock part no 256b1101078, protecting bushing part no 255b3408065, qtr glass hinges(rubber) part no dmd-niv-3767, qtr glass lock part no niv, qtr glass rubber part no nk, rifle stand base part no dmd-nk-4009, rifle stand clamp assy part no dmd-nk-4010, ring sealing brg(winch p/shaft) part no 53a2201122, rod sealing part no 214b1310172, rod, strip hold down part no nk, roller bearing gp37611/7611k part no 255b2304020, rubber plate bty box part no nk, run channel beeading part no nk, seal part no 256b3405178, seat back assy/back rest assy seat part no 256b6900200, seat cushion part no 256b6800110, strap hold down part no 255b3703162b, strip weather drop glass part no niv, tail light mtg plate with guard part no nk, thin alluminium flat channel 1/2", l-16 part no nk, trailer plug socket ps-300a(2143730010) part no ps300a3723100, tube air cross to rear axle right brakec part no 214b3506310a, tube assy lh part no 255b4224085b, washer part no 2102919038a, weather strip wind shield part no 2145206050, rear pipe assy from compr to washer part no 256b13506201, shaft clutch part no 236n1701027b, bolt (front road spring) part no 2000817p29, bolt m 14x50 part no 201593p29, cabin floor supporting part no nk, gasket part no 255b8500046, pin part no 260088p18cp29, pin clip part no 256b110111520, gland yoke part no nk, handle inside door part no 2146105182, hatch cover part no 2361601030a, cylinder b 20 part no 256b3513015, cylinder b-40 part no 2503513015, valve, tyre pressure ctrl part no 11312200901, adaptor rear coupling head part no nk, angle plate foot step body part no 255b8506315, ball brg dia 3/8"(200-1702083)/ball dete part no lv6/mt73110002694, bracket holder cam part no 255b3909107, bracket, handle part no 2561108288b, channel upper drop glass part no 2146108255b, corrogated ring support (aps) part no nk, door outer handle part no 2146105152, holder oil seal cross part no 514919, holder oil seal slip yoke part no 522201087, key/wood ruff part no 347013p2, lamp part no 6240001209, pin shoe f/b part no 2003501132a, pipe to pressure gauge part no 255b1383004410, rod bonnet holding stand part no nk, rod tie door latch comp part no 6105102, roller pin angle distance piece part no nk, seal part no 255b3104036, shim 0.1mm/gasket part no 2144501098, spring (aps) part no nk, turn indicator relay part no 2143726030, union outer thread part no 347464p29, cleaner, air part no 2381109012, wing nut, slotted link part no 2125204024a2

CTN :45447894

17 Jun, 2026 NA

Doda - Jammu And Kashmir

Tender For bid to ras supply of roter head , injctor nozzle , packing kit , came shaft , roller with washer , stabilizer bush , clutch rel brg , stabilizer bar link rear , rear wheel brake disc , road spring center bolt , propeller shaft nut and bolts 2.5 ton , propeller shaft nut and bolts als , self starter bush set nm , indicator bulb 12v 21w orange colour , indicator bulb 24v 21w orange colour , insulation tape black

State Government

CTN :45542764

19 Jun, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

Central Government/Public Sector

CTN :45546535

25 Jun, 2026 NA

Dahod - Gujarat

Tender For supply of pair of roller bearing consisting of one numbers each type of bearing, a) road wheel end bearing as per m/s nei ltd. drg. no.- m-67981/m-67919 & drg. no. pesd-6019 & m/s fag ltd. drg. no.- fag part no. z 566565. tr1& m/s skf ltd. drg no.- 67981/67919/vu1701 (make-indigenous) & m/s timken ltd. drg no. 67981/67919 or equivalent of other make b) gear wheel end bearing as per m/s nei ltd.part no.m-67982/m 67919 & drg. no.- pesd-6020 & m/s fag ltd. drg. no.- fag part no. f-809115.tr1& m/s skf ltd. drg no. 67982/67919/vu1701 (make-indigenous) & m/s timken ltd. part no.-67982/m-67919 or equivalent of other make. technical requirements conforming to rdso specn. no.- mp.0.2402.17 (rev.-2) of march-2021 for 1400 hp demu/dpc. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45556843

16 Jun, 2026 NA

Dahod - Gujarat

Tender For supply of pair of roller bearing consisting of one numbers each type of bearing, a) road wheel end bearing as per m/s nei ltd. drg. no.- m-67981/m-67919 & drg. no. pesd-6019 & m/s fag ltd. drg. no.- fag part no. z- 566565.tr1& m/s skf ltd. drg no.- 67981/67919/vu1701(make-indigenous)& m/s timken ltd. drg no.- 67981/67919 or equivalent of other make b) gear wheel end bearing as per m/s nei ltd. part no.m-67982/m-67919 & drg. no.- pesd-6020 & m/s fag ltd. drg. no.- fagpart no. f-809115.tr1& m/s skf ltd. drg no.- 67982/67919/vu1701 (make-indigenous) & m/s timken ltd. part no.-67982/m-67919 or equivalent of other make. technical requirements conforming to rdso specn. no.- mp.0.2402.17 (rev.-2) of march-2021 for 1400 hp demu/dpc. [ warranty period: 30 months after the date of delivery ] ]

Roller Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

corporations/Associations/Others

State Government

Central Government/Public Sector

Central Government/Public Sector