Latest rolling stock scrap Tenders | Government rolling stock scrap Tenders

State Government

CTN :45051647

19 May, 2026 12.02 Lacs

Manuguru - Telangana

Tender For btps - chp - checking of all chutes and flap gates from bcn-1a/b conveyor to bunker floor as and when required in operation and electrical division of chp/btps for a period of 03 months i.e from 01.07.2026 or from actual date of commencement of work

CTN :45086303

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - lot no.y.mf-10.exmp.x-2.05.26.28 description- scrap junk/kutchra [any ferrous scrap disintegrated through rust or corrosion tin & galvanised sheeets, strips & cuttings commode chutes, refuse receptacles, heavily corroded & disintegrated sleepers and pcs. etc. all kind rusted corroded drums. scrap expanded metal and wire mesh, rusted or corroded tin & tubelight fittings , all rusted pitted pipes, deformed rusted small structures, very rusted and old nuts, washers and wire spring , packing strips, oil filter, etc. negligeable nf may be attached with some qty & other mf-10 items as in the lot (above material may or may not be available in the lot) [loading will be done by purchaser's own arrangement]

Central Government/Public Sector

CTN :44550164

11 May, 2026 NA

Singrauli - Madhya Pradesh

Tender For corrigendum : supply of lt circuit breaker at vindhyachal and allahabad substation e e - supply of 415v 3400a 75 ka 3-pole ac lt air circuit breaker and accessories for retrofitment as per attached ts and sow , retrofitment kit with copper bus thickness 8mm width 10cm for supplied acb , retrofitment of new lt air circuit breaker in acdb including dismantling of old circuit breaker , spring charging motor , aux. contact sets , bus bar seal off insulators , arc-chutes , moving contacts , arcing contacts fixed moving , springs closing opening , closing coil with resistor , tripping coil with resistor , supply of 415v 1000a 3-pole ac lt air circuit breaker and accessories for retrofitment as per attached ts and scope of work , supply of 415v 800a 3-pole ac lt air circuit breaker and accessories for retrofitment as per attached ts and scope of work

CTN :45067089

08 May, 2026 48.91 Lacs

Krishna - Andhra Pradesh

Tender For providing assistance for uninterrupted coal conveyance from wagon tipplers 5 to 6 to crushers & crusher to bunkers due to complete wet coal at different chutes, location & transfer points and providing of labour charges for breaking & clearing of heavy size coal boulders and shale in coal rakes received from m/s mcl, m/s sccl, m/s ecl and m/s wcl & coal clearing on wagon tipplers 5 to 6 grid hoppers in operation division/ chp / stage- iii&iv/ dr.nttps as and when required, during the period from 01.04.2026 or from the date of commencement of work to 30.09.26

CTN :45067090

08 May, 2026 48.91 Lacs

Krishna - Andhra Pradesh

Tender For providing assistance for uninterrupted coal conveyance from wagon tipplers 1 to 4 to crushers & crusher to bunkers due to complete wet coal at different chutes, location & transfer points and providing of labour charges for breaking & clearing of heavy size coal boulders and shale in coal rakes received from m/s mcl, m/s sccl, m/s ecl and m/s wcl & coal clearing on wagon tipplers 1 to 4 grid hoppers in operation division/ chp / stage- i&ii/ dr.nttps as and when required, during the period from 01.04.2026 or from the date of commencement of work to 30.09.26

CTN :45066210

11 May, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of rolling stock - scrap iron and steel which will be released after cutting of cond. 8 wheeler bg bcnm type wagon. wagon no. 30029160409/bcnm-1/er tw 27.20mt 30029162540/bcnm-1/er tw 26.30mt 30079171639/bcnm-1/ser tw 27.20mt 30029125941/bcnm-1/er tw 25.20mt 30019160464/bcnm-1/cr tw 25.27mt 30029126597/bcnm-1/er tw 25.50mt 30099160040/bcnm-1/scr tw 24.80mt 30029126573/bcnm-1/er tw 27.20mt 30029160089/bcnm-1/er tw 24.80mt 30069110853/bcnm-1/sr tw 26.60mt 30079170571/bcnm-1/ser tw 26.30mt 30029127792/bcnm-1/er tw 25.50mt 30079170946/bcnm-1/ser tw 25.60mt 30029160232/bcnm-1/er tw 24.56mt 30069160681/bcnm-1/sr tw 27.08mt 30079161012/bcnm-1/ser tw 26.90mt 30079170694/bcnm-1/ser tw 25.60mt 30039160390/bcnm-1/nr tw 26.72mt 30019161621/bcnm-1/cr tw 26.50mt 30079160985/bcnm-1/ser tw 26.00mt 30019160105/bcnm-1/cr tw 27.20mt 30079168691/bcnm-1/ser tw 26.70mt complete/incomplete, sort and sizes, with or without doors, without excluded items. (cutting allowed)

State Government

CTN :44828796

16 May, 2026 NA

Kheda - Gujarat

Tender For corrigendum : work of chute puncture and coal leakage attending work in various locations by patch work and repairing of transfer chutes/structure of various conveyor system in coal handling plant, wtps

CTN :45042586

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned scrap loaded boxnm1 & boxnr wagons no as following: [1] cr 10019704257 boxnm1 (ms scrap loaded) [2] ser 10079560640 boxnm1 (ms scrap loaded) [3] scr 10099460203 boxnm1 (ms scrap loaded) [4] ser 10079661514 boxnm1 (ms scrap loaded) [5] scr 25099560945 boxnr (ms scrap loaded) [6] scr 10099633188 boxnr (ms scrap loaded) condition:- [1] as is where is basis.[2] cutting is allowed for loading facilities only.[3] to be sold without all available excluded fittingsas follows:- (i) for boxnm1 & boxnr : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 03 & 05 are fitted with 22w(m) casnub bogie which are to be sold with wagon.[4] all wagons will be sold along with the scrap material present in wagons.[5] although sale unit of condemned wagon is in nos but delivery will be given on weighment basis(weight slip) at ssy weighbridge with saleable weight of 175 mt only.

CTN :45042587

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bfkhn wagons no as following: [1] cncr 98259100282 bfkhn. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (11.640 mt) is the lot quantity (11.640 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchasermay, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for bfkhn : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 01 is fitted with 22w casnub bogie which is to be sold with wagon.

CTN :45042588

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bvzc wagons no as following: [1] special repair 85060260069 bvzc [2] cr 85019460052 bvzc [3] cr 85019650217 bvzc [4] special repair 85069660242 bvzc [5] nr 85030160023 bvzc [6] special repair 85069656917 bvzc [7] ser 85079660300 bvzc [8] wr 85080450457 bvzc [9] ser 85079760031 bvzc [10] nr 85039600360 bvzc [11] wr 85080160233 bvzc [12] ecr 85100360018 bvzc. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at the time of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (113.460 mt) is the lot quantity (113.460 mt ) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge .[3].if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4].if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5].no dispute regarding variation in weight shall be entertained after e-auction sale.[6].before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighatarea beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittings as follows:- for bvzc : wheel set with rb andaxle box, brake cylinder, distributer valve, draft gear, coupler body, yoke & yoke pin as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024

Rolling Stock Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government