Latest rolling oil Tenders | Government rolling oil Tenders

CTN :44156135

03 Mar, 2026 NA

Umaria - Madhya Pradesh

Tender For supply of hoisting lever cable 1320004304 , drill head oil seal top , drill head oil seal bottom , nq spindle bottom guide plate , foot clamp jaw lever , drill head roller , rotation cable , amc piston rod , amc bca , amc valve seat , amc liner

CTN :44158234

03 Mar, 2026 8.75 Lacs

Sagar - Madhya Pradesh

Tender For tender for supply of fuel return tube , tie rod end steering , release bearing assy , relay with resistor , assy aux water tank , cable 3250 mm , wiring harness tail , parts kit hand brake , fd coil assy , oil cooler assy , propeller shaft , spindle wheel bearing , alternator assy

CTN :44144491

03 Mar, 2026 NA

Parganas - West Bengal

Tender For tender for supply of grease nipple(fig-i) , set screw (fig-i) , stud (strong , p-23) , stud(fig-h) , stud ( strong , p-22) , shim set (strong p-23) , nut and pin (strong , p-22) , nut and pin (strong , p-23) , clamping plate(fig-i) , stud (fig-i) , stud (fig-i) , distance washer(fig-h) , distance piece (strong , p-21) , distance washer (strong p-22) , distance washer (strong , p-22) , washer & slotted nut(strong p-26) , shim set(fig-h) , oil seal(plate-h) , plug cyinder block water jacket , end plate rh (strong , p-22) , oil seal housing (plate no-4) , dust excluder (plate no-3) , fork operating spindle (plate no-7) , stud , shim set (strong , p-22) , clamping stud with nut(fig-i) , shim set (strong , p-22) , distance tube (strong , p-22) , outer clamping plate (plate no-10) , gasket cylinder head , distance end piece (fig-i) , bush for clutch plate (fig-i) , bearing (fig-i) , top bush (plate no-3) , bearing ( strong , p-21) , inner distance piece (fig - i) , housing cover lh for 2nd inter shaft ( strong , p-2 , flexible hose , bush for clutch operator (fig-i) , side clutch operating (plate no-10) , clutch operating fork (plate no-7) , trust bearing(fig-i) , 2nd inter shaft (fig-h) , housing cover r.h for 3rd inner shaft , break strap with lug(fig-j) , distance tube , 3rd inter shaft(fig-h) , bearing (fig-i) , bearing cover rh for 3rd inner shaft , spur pinion(16t)(fig-h) , bearing housing rh ( strong , p-21) , bearing housing lh for 2nd inter shaft (strong , p- , bush (fig h) , tapper roller bearing (strong p-23) , pinion 1st & 2nd speed (44t) (strong , p -22) , tapper roller bearing 9strong p-23) , pinion 1st and 3rd speed (fig-h) , bearing housing lh for 3rd inter shaft(fig-h) , integrated pinion (20-26t) (strong , p-21) , diff dog clutch (strong p-23) , pinion 3rd & 4th speed(30 teeth(fig-h) , spur gear ring (58t) (strong p-23) , pivot (plate no-3) , clutch casing (fig-i) , differential shaft 9strong p-23) , pinion 2nd & 4th speed ( 45t) (strong p - 22) , differential centre (strong , p-23) , bearing housing rh for differential shaft (strong , , bearing housing lh for diff shaft 9strong , p-23) , adjusting set rh (strong , p-23)

CTN :42858635

05 Mar, 2026 NA

Uttara Kannada - Karnataka

Tender For corrigendum : supply of procurement of cpp shafting spares c c----needle roller bearing nk 120-16, o ring dia 365x6, o ring dia5x275, o ring dia6.5x1.6, o-ring or118-6 70nbr, gasket a40 x 49din7603-vf, o-ring ew809 x 25 pergunan n169-26 70 shore, o-ring or785-8-70nbr, gasket a 75x84din7603-vf, gasket a21 x 26 din 7603-sf-cu, thermometer bm 100 x 63 type 174b, o-ring or 166-6-70nbr, gasket a 54 x 62 din 7603-vf, o-ring or697-12-70nbr, staves thordon, equal elbow coupling dsvw 10-plr, o ring dia 360x6, o ring dia 37.69x3.53, o ring dia 540x6mm, o ring dia 150x5mm, oil seal housing, o ring dia 320x5, gasket a33x39din 7603-vf, gasket gm1000d36-24x2, seiling profile 8x 2120-70nbbr 150(dia 660), gasket gm1000d24-16x1.5, seiling profile 10x2400-70nbr 150(dia 750), o-ring or 172-4-70nbr, spare set parts for screw-spindle pp, sealing profile dia 6x1800, o ring dia35/5, o ring dia 430x7, o ring dia 180x3, oring dia 51x25mm, roller needle bearing type nkj 30-20, bearing needle roller nki 20-17, filter oil insert duplex, joint washer a 14x18, o ring dia 101.19x3.53mm, pitch setter

corporations/Associations/Others

CTN :43050781

27 Feb, 2026 2.25 Crore

Sonbhadra - Uttar Pradesh

Tender For corrigendum : supply of maintenance of turbine and its auxiliaries of btps obra d d - 51 to 100 , attend flange or bonnet lkg of hp valve or hp pipe101 to 150 , attend flange or bonnet lkg of hp valve or hp pipe151 to 200 , oh of by pass valve of temp control line or patch welding work in the condenser or hot tightening of ejector , clean of filter of tur oil or h2 cooler str , oh of main steam line valve i. e. v2 6 , oh of feed line valve with by pass valve , oh of nrv of extraction line, es-1 or es-2 or ipt transfer pipe line drain valve , oh of nrv of extraction line,es-8 or es-11 or oh of nrv of hp drip or cep disch line , oh of valve cont. to cond dw-4 or 38- 41 or ca-5 or as-47 or as-48 valve , oh of stm throw valve to cond or iso lph-2 , oh of steam by pass valve v2-27 or 15 or v2-7 , oh of extrac valve i. e. es-3 or 4 or 5 or 6 or 7 or oh of drip line gate valve hd-21or 29 or 30 or 31 , oh of fcnrv or isolating valveof lph-3 or 4. , oh of condensate throw off valve to cond , rep of es-9 by h. p welding tech, , rep of v227 or 15 by h. p welding tech, , rep of v2-38 or 81-84 by h. p welding tech, , oh of actuators of msv-l or r , oh of actuators of dw-4 or 38- 41 or ca-5 or cst makeup valve or es-3 to7 or hd-21 or hd-29 to 31 or as 47 or 48 , oh of actrs of v2-38 or 81-84 or 27 or 15 or v2-7 or steam iso valve lph-3 or 4 , oh of actrs of butterfly valve , oh and revisioning of lph-2 to lph-4 or gc-i or gc-ii or lph-1a or lph-1b , oh of gauge glass of lph or gc or ejc or dea o rcon , tight. of flange of crh or gc-i or ii or lph , overhauling of dss of aux. , prds-ii , overhauling of main flash tank , overhauling of aux flash tank , repair or replacement of broken hanger. , tightening of loose hangers. , attend the flange leakage of crh line. , serv of hydr. brake of chit or gar crane , chk and grs. of brg,cplg,chang bush of bolt or serv of greep brake of chit or garlic crane or sevicing servicing of all the wheel of garlic or chitram crane and plate , oh of small hook of chit or garlic crane or oh main hook , serv. of all gear boxes of chit or gar crane , check and clean of wire rope drum or bearing , oh of dss of aux. prds , cut and weld and repl of lp valve up to 50 mm , cut and weld and rep of l. p. valve51 to 100mm , cut and weld and rep of l. p. valve101 to 150mm , oh of isolating or bypass valve of pcv 5 or 14 or 17 , oh of valve contd to dea at 13 mtr v2-21 or cst makup valve , oh of suc valve of bfp or disch valve of cep , oh of suction valve of cep or mc-18-25 or 33 or 37 or oh of u bend valve , fab of reducer for hp drip 218-80 or 168-80 , rep of reducer of h. p drip line , lph drain line valve hd-8 or 9 or 14-19 or 20 , check and rect of internal fault of dea , blanking of crh line for reheater ht , rem chocking oil drain of brg1 or 2 of tur. , rem chocking of drain of cntg. machine. , repl of damaged nrv of pcv-14 or 17 size200 , repl of damaged nrvof feed line size-250 , oh of butterfly valve of condenser , hot tightening of cross over pipe , oh of hp heater and attend of flange lkg. , attending the shell joint of hph , attend the spot lkg of hph shell joint. , oh of safety valve of flange or stud heatng or lp heater or hp heater or cbd tank , oh of safety valve of warm up line , oh of safety valve of aux prds or deaerator or oh of nrv of aux rpds heat line to fst , oh of nrv v2-52 or v2-53 or v280 , oh of nrv of re-circulation line of bfp or spindle leak off line , oh of h. p. valve and nrv. , oh of h. p. steam drain line valve. , rep of nrv of hph drip to deaerator , welding of crack in hph or crh pipe line , fab of bend for recirculation line or oh of group protection valve i. e. fw-1 , fab of bend for hph drip line con to dea , fab of bend of lph drip to drip pump or condenser , rep of bend of hph drip line con to dea , rep of bend of rc line con to dea or oh of //bid details2 / 106feed pump energy absorber. , rep of bend of lph drip to drip pump or condenser , cutting and welding of h. p. valve 15 to 50m

Central Government / Public Sector

CTN :44151561

02 Mar, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot miscellaneous scrap - hec surface wheel lathe machine: (pl-98325012) cond. u/s. hec surface wheel lathe machine in dismantled condition. model no: lw140-b4, sl. no:727-013, m&p no.3112193. quantity- 01 no. machine contained following electrical items :1) hydraulic power pack motors 7.5 hp -02 nos; 2) main spindle motors 73.7 hp-02 nos; 3) head stock lh&rh movement motors 10 hp-02 nos; 4) motor copper cables. with/without spare parts/attachments. total gross weight- 47700.00 kgs. approx., (copper content:163.000 kgs approx. and other ferrous weight:47537.000 kgs. approx.). ds8 no.095266-25-01894 date:14.10.2025. custodian- sse/mw/crs/tpty, controlling officer- cwm/crs/tpty. note: 1) excluding items [1) control panel-02 nos,2) servo voltage stabilizer-01 no,3) oil chiller unit-01 no, 4) lubrication motor- 04 nos, 5) linear encoder with dro-01 no, 6) hmi panel-01 no, 7) hydraulic pump of power pack-01 no, 8) gear box lubrication pump-01 no, 9) spindle lubrication pump-01 no, 10) flexible coupler -01 no.] to be returned to railways by the purchaser/representative. 2) delivery on number basis only. 3) gas cutting permitted to facilitate loading. hsn code-84589990, gst-18%. special note:1) custodian should make the premises clear to facilitate easy loading of the material. he should allow the vehicle inside, up to the location without any hindrance to the movement of vehicle of the purchaser; 2)purchasers are advised to physically inspect the lot before bidding as the lot is located inside the workshop and the sale is on "as is where is basis"; 3) purchaser is advised to bring all the required equipment for gas cutting & loading. 4)purchasers are responsible for providing adequate fire extinguishers & safety equipment on the spot at the time of cutting & delivery of the lot. 5)purchasers should make necessary arrangements to load the sold lot without causing interruption to day-to-day maintenance activities of the shop. 6) physical weighment is not done and not possible, weighment assessment has done by custodian as per old files and condemnation records available with him. location: in open yard west side of wheel shop-crs/tpty.

CTN :43869333

16 Mar, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of 24brsc002 spares of various types of ro plant c c -servo motor control valve 230v 3 8 , servo motor control valve , 670 mm long hose , 930 mm long hose , 450 mm long hose , 325 mm long hose , 250 mm long hose , 1250 mm long hose , 825 mm long hose , 1000 mm long hose , 900 mm long hose , 1650 mm long hose , solenoid valve 82 , solenoid valve actuator , solenoid valve 3 2 way , level switch ls 01 & ls 02 1 each , flow switch , electric spare kit for ro 200 , processor control , pressure transmitter , pressure transmitter , pressure relief valve , pulsation damper 2 lts , e spare kit ro 30 tpd , potentionmeter , circuit breakers 16 25 a , control transformer , motor 11 kw , pressure gauge 0 10 , sensor cable with electrode , compressed air regulator , seal ring charging , mcb 2a , programmable logic controller version 2 , casing , taper bush for hp pump motor , taper bush pump , taper bush 1610 bore 42 mm , prefilter pumpmotor set of ball bearing , bearing hp motor , 6 mm bolts for filter pump , prefilter filter pump shaft seal , nut , stay bolt for pump 202600 , sleeve gasket , chamber bottom , split pin , spare kit d32 abs , repair kit for pre filter pp , 2 way ball valve set , 2 way ball valve set of 2 , 3 way ball valve , globe valve sampling cock pvc 1 4 bsp f , ss service kit , ss service kit for ro 510 5s 10s , pulley for pump , crt prefilter filter pump motor bearing nde , ro 200 2tpd & 4tpd prefilter filter pump motor bearing de & , seal kit for hp pump , seal kit for hp pump , valve kit for hp pump , oil seal , anode plug , hp pump valve kit , hp pump seal kit , valve plug 70 kg , cylinder screw , oil dipstick , hp pump anode plugs , seal kit , dolomite , s s jubilee clips 1x 30 mm to 40 mm , ss jubilee clips 2x 45 mm to 60 mm , belt spanner , filter element , o ring hp connection , dt module , pl4 pipe , permeate male elbow , pvc elbow 1 4 xpl4 , pvc tee pu 4 , connector straight , smcv valve spindle unit , leve switch , hp hose raw water brine 2500l , pressure switch , impeller , dolomite , h p pump crankcase oil , hp hose to pt 60 , allen key set , pressure ring p30 43 130 , ceramic plunger , oil filter cap , wick , valve set , oil seal crankshaft , plunger rod , hp pump inlet manifold , anode plug zinc anode , permeate male elbow , male adaptor , hp pump discharge manifold , valve plug 70 kg , straight connector 3 8 , elbow pvc push in fitt , media for sand filter grade i , cartridge filter housing 20 , support gravel 2 0 3 0 mm , support gravel 1 5 3 0 mm , nitrogen gas cylinder , h p pump c case oil , handle , pu9 hose , flexible tube pu8 , dt module 4 tpd ekm subs , lip seal dt module , o ring hp connection , high pressure hose module outlet , high pressure hose to pt 60 , high pressure hose module outlet , hp flexible hose , lp hose for air line , h p hose feed inlet brine outlet , brine r w hp flexible hose xl , high pressure hose module outlet , rubber hose from c f outlet to hp pump inlet 20 30 tpd , lp hose for prefilter pump , hose 20mm with threaded end connections , lp hose brine & permeate , a v mount for hp pump trolly , high pressure pump driving belt set 5 nos , coupler for victaulic coupling 1 , hp pump driving belt set , h p pump driving belt set of 2 , abs service kit , elbow connector 3 8 , straight connector 3 8 , connection high pressure , pipe pl4

CTN :44010564

06 Mar, 2026 NA

Ernakulam - Kerala

Tender For tender for supply of bushing , gasket gear cover plate , spring compression , ring rectangular seal , cup injector , con rod bearings , screw captive washer cap , spacer mounting , liner cylinder , barrel and plunger , gasket rocker lever housing , hose plain , seal o ring , gasket turbocharger , set piston ring , element oil bypass filter , gasket heat exchanger , camshaft , camshaft , tube water makeup , seal o ring , ring thrust , hose flexible , washer lock , gasket oil pan , spacer mounting , element lub oil filter , seal banjo connector , clamp t bolt , connector female , rod push , belt v ribbrd , adaptor reducing , gasket turbo charger , union banjo connector , washer sealing , set lower eng gasket , washer plain , collet valve , brace tube , spring compression , manifold fuel , lever rocker , lever rocker , brace tube , spindle , spring valve , retainer valve spring , tube fuel drain , tube injector fuel supply , tube injector fuel supply , tube injector fuel supply , tube injector fuel supply , tube injector fuel supply , tube injector fuel supply , tube fuel drain , bearing connecting rod , sleeve salvage , seal banjo connector , inhibitor corrosion premix 10 lt , pump fuel transfer , turbocharger , nut hexagon flange , injector , tappet valve , motor starting , camshaft , pump lubricating oil , pressure sensor , sensor temperature , pick up magnetic , switch pressure , exchanger heat , gasket turbo charger , hose plain , gasket exh out connection , screw hexagon head cap , gasket cylinder head , plug zinc electrode , screw hexagon head cap , gasket lub oil pump , gasket connection , bearing thrust , tube expansion tank , seal o ring , gasket wtr trf connection , washer thrust , spring injector , seal o ring , ring retaining , hose elbow , screw hex flange head cap , hose plain , valve exhaust , valve intake , clamp hose , spring valve , gasket thermostate housing , seal injector , set piston ring , seal o ring , set piston ring , gasket hydraulic pp , nut regular hexagon , ring oil piston , gasket header cover , gasket connection , hose flexible , hose , element fuel filter , hose flexible am8015ss , washer bevel , pump water idler , bearing main , bearing main , bearing main , bearing main , bearing main , damper vibration , seat check valve , cover heat exchanger , clamp tube , rod push , rod push , element lo filter , pump water , kit tur repair , pump lubricating oil , pump fuel injection , solenoid fuel pump , hose elbow , coupling elbow , manifold exhaust , set main bearing std , gear crankshaft , core cooler , plunger prs regulator , hose molded , hose flexible , gear fuel pump , kit hx40 turbo repair , block cylinder , crank shaft , control card , signal converter , pick up magnetic , actuator etr fuel control , motor starting , mx321 avr , stud , nut lock , seal o ring , gasket adapter

CTN :44129671

02 Mar, 2026 10.69 Lacs

Jalandhar - Punjab

Tender For supply of mirror size 600mm x 450mm x 5mm glass be mounted on acrylic sheet 3mm , solar delinator 1000 mm , abs speed breaker , low level cistern pvc 10 ltr cap complete , galvanised steel wire cloth 0. 45 or 0. 5mm nominal dia of wire , ss kitchen sink of size 16 inch x 18 inch x 7 inch , corner glass shelf 9 inch , glass shelf 18 inch , spindle for bib cock 15mm , dr fix damp guard , wash hand basin china ware 22 inch x 16 inch complete , spindle for stop cock 15mm , hydraulic door closer cast iron non porous , oil bound distemper , ptmt shelf 12 inch long with 6 nos brush holder and 02 nos soap dish , pvc water storage tank 500 ltr , pvc water storage tank 1000 ltr , ptmt ball cock complete with al rod and ball 15 mm float valve 15 mm , pvc pipe single socket in 3 rm length with rubber ring 75 mm dia , gi pipe 20 mm dia , cp towel rack 24 inch with fittings , heat reflective paint , toughen glass 3 feet x 4 feet x 5 mm thick , curtain rod ms chromium plated 20mm dia, 16 gauge thick , curtain rod ms cp 20mm dia, 16 gauge thick , lid for pvc water storage tank 500 ltr , helical door spring size 150 mm door size upto 1000 mm door weight upto 75 kgs , cp towel rail with bracket 450mm , m-seal of 1 kg packing , cp soap dish ss of size 5 inch x 4 inch , wc indian type orissa pattern china ware , pvc connection pipe with cp nut 12 inch , pvc connection pipe with cp nut 18 inch , pvc connection pipe with cp nut 24 inch , cp toilet paper holder , pvc waste pipe plain 32 mm , pvc waste pipe plain 40 mm , pvc connection 15mm 18 inch , tower bolt aluminium 150mm , pvc waste pipe flexible 40mm x 800mm , sliding door bolt 200mm ms , ptmt waste coupling 32 mm , ptmt urinal waste coupling 32 mm , window glass pane plain 0. 44 m x 0. 85 m , window glass pane plain 0. 52 m x 0. 52 m , pvc waste pipe flexible 32mm x 800mm , window glass pane plain 0. 39 m x 0. 56 m , window glass pane plain 0. 44 m x 0. 51 m , pvc connection 15mm 15 inch , aluminium door stoper 63mm , bow handle aluminium 150mm , window glass pane plain 0. 54 m x 0. 37 m , bow handle symet 150mm , window glass pane plain 0. 37 m x 0. 46 m , bow handle aluminium 125mm , butt hinges 4 inch , window glass pane plain 0. 40 m x 0. 55 m , gi pipe 15 mm dia , cp tumbler holder , pvc waste pipe cp coated 40mm , ptmt push cock 15mm , oil putty ready made , aluminium door stoper 50mm , handle for mortice lock cp , pvc waste pipe cp coated 32mm , ptmt soap dish 5 inch x 4 inch , bow handle aluminium symet 75mm , cp grating 100mm , tower bolt aluminium 100mm , white cement of 1 kg pkt , door handle ms 100mm ovel type , pvc hinges for fixing lid cover , pvc socket 110 mm dia //bid details2 / 58

CTN :44107719

02 Mar, 2026 3.89 Lacs

Kalpakkam - Tamil Nadu

Tender For supply and safe delivery of roto-z oil for atlas copco make oil free screw compressor of model no-zr , supply and safe delivery of spindle oil 12 spin 12 viscosity grade 12, with kinematic viscosity 11-1

Rolling Oil Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government / Public Sector