Latest roof scrap Tenders | Government roof scrap Tenders

corporations/Associations/Others

CTN :45328177

05 Jun, 2026 62.00 Lacs

Kaushambi - Uttar Pradesh

Tender For supply of materials and erection for shifting of control room pannel at 33/ 11 kv sub station bharsawa distt. kaushambi under deposit scheme on turnkey basis under edc, kaushambi - name of work: supply, carriage & erection of materials for control room pannel shifting of shiffting of 33/11 kv s/s bharsawa distt. kaushambi, supply of centralised materials, 11 kv switch gear 600/300/5a 350 mva i/c, 11 kv switch gear 200/100/5a 350 mva o/g, 11 kv 3x300 mm2 xlpecable, 11 kv 3x120 mm2 xlpecable, 24 volt battery, 24 volt battery charger, pcc. 8.5 mtr. long for feeder, 11 kv tpmo switch with fixing clamp, 11 kv top channel, 11 kv dropper angle, earthing complete, stay set complete, 11 kv polymer pin insulator, 11 kv polymer disc insulator, 11 kv disc fiting, 33 kv control panel t/f, acsr weasel conductor, supply of de-centralised materials, 11 kv 3x120 mm2 xlpe cable jointing kit o/d & i/d, control cable 4x2.5 mm2, control cable 2x2.5 mm2, g.i. pipe 6 " dia, rubber matting, clamp with nut & bosts, earth wire clamp for pcc pole, stay clamp for pcc pole, top channel clamp pcc pole, dropper channel clamp pcc pole, g.i. strip 35x6 mm, carriage of following material, pcc pole 8.5 mtr. long., structure of la, 33kv isolator, 33 kv cts, single t/f control pannel, 33kv vcb,11 kv outgoing. incoming pannel, battery & battery charger and other associated accessiories etc. (availibility at concern store center of store division), erection work, installation of 33 kv single transformer control pannel 2 no., incoming 2 no. and 7 no. outgoing in the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. work includs fitting of all accessories in all respect with complete connection of control cable with pannel. all material will be provided by the contractor except vcb and crp., construction of cable trenchs with top cover and laying of control cable for vcb, c.t. & t/f control pannel etc. as per direction of engineer. trenchs to be 12 wide and 9 deep. work includes digging, of trench, concreting of the foundation in the ratio 1:3:6 r.b. wall 9 wide with cement mortar 1:4 and plastering inside the trench in the ratio 1:3 and sand filling in the trench. all material will be provided by the contractor., earthing of 11 kv indoor equipments, switchgears as per resspo drawing. with g.i. strip of size 35x6 mm. g.i. strip fully welded at both ends and to be connected with earthmat,, erection of dp with pcc pole 8.5 mtr long with all accessaries and grouting of the pcc pole with cement, sand and brick ballast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing no. res-6.(cement, sand, brick, ballast shall be provided by the contractor.), installation of 24 volt battery and battery charger with cabinet in the switch gear room, by grouting base channel 100 x 50 x 6 x 1000mm. fixing of rag bolt., laying of 11 kv 3x300/3x185/ 3x120 sqmm. xlpe cable by digging 0.75 mtr. deep trench, putting layer of sand in the bottom, ramming it, laying of cable over it rmt and covering the cable from sides and top by laying bricks, finally covering the same by earth and levelling of the same, all the materials, except cable, will be pvovided by the contractor., fixing and termination of outdoor/ indoor heat shrinkable cable boxes of size 3 x300/3x185/3x120 sqmm. xlpe cable. boxes will be supplied by the contractor, sundries ( as per site requirement/emergency work), safe dismantling of 11 kv o/g pannel & received back to store, laying of weasel conductor with the help of aluminium roller by hanging three nos. on each support in a manner taking sufficient care to ensure safety of weasel conductor against rubbing on ground, precaution for safety of crops is also to be taken. the work includes jointing of conductor by providing jointing sleaves, stringing of conductor upto correct sag and binding of conductor with insulators on each support. all material shall be provided by contractor such as join

CTN :45314745

05 Jun, 2026 NA

Tirunelveli - Tamil Nadu

Tender For procurement of 315 sets of 11kv transformer structure material (10 centre) for 9m psc pole to tirunelveli region as per specification

CTN :45197592

28 May, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : tender for supply of terminal block 4 sqmm screw connector type , fuse , 6.3a , 5 x 20 , terminal block 4 sqmm , control relay glass type 2c/ o 110vac with base , mcb 2 pole 10 a c curve , pilot lamp white , indication lamp 110v ac 22mm diameter (red) , indication lamp 110v ac 22mm diameter (amber) , control cable 8 x 1.5 sqmm pvc insulated 80 mtr , limit switch , direct drive motor , controller transformer 1p 300va 380// 110v , stainless steel ss304 encl 500x500x210(control panel) , proximity sensor , luna light skewing system steel structure assembly , power cable 3 x 2.5 sqmm pvc insulated 15 mtr , joystick controller 2 direction 22mm diameter , electric motor direct drive controller , main switch disconnector 3 pole 25a , stainless steel ss304 encl 175x150x150(operating station)

corporations/Associations/Others

CTN :45289657

05 Jun, 2026 NA

Tirunelveli - Tamil Nadu

Tender For procurement of 315 sets of 11kv transformer structure material tirunelveli region as per specification

State Government

CTN :45028919

25 May, 2026 NA

Medininagar - Jharkhand

Tender For supply of line materials under electric supply area medininagar - electrical items :, hot dip galvanized from fabricated iron materials - 33 kv v cross arm (100x50x6) 19.7 kg (galvanized) for rail , 33 kv pole top bracket (100x50x6) 2.9 kg for rail (galvanized), , back clamp for 33kv v cross arm for rail 3.2kg, , 33kv dp channel (100x50x6mm) 45.5kg, , support clamp for 33 kv dp channel for rail 1sets=4pairs 9kg, , 33 kv v cross arm (100x50x6) 19.7 kg (galvanized) for psc pole 400 kg. 19.2kg, , 33 kv pole top bracket (100x50x6) 2.9 kg for 400kg.psc pole (galvanized), , 33kv tapping channel (100x50x6) mm 23 kg, , back clamp for 33kv cross arm for psc pole 400kg.3 kg, , 33kv dp channel (100x50x6) mm 45.5 kg, , support clamp for 33 kv dp channel psc pole 400kg. 1sets=2pairs 6kg, , side stay clamp 400 kg psc pole (galvanized) 1.92kg, , angle stay clamp 400 kg psc pole (50x8) 1.92 kg (galvanized), , 33 kv cross bracing for dp structure (50x50x6) 64.3 kg 1 set=4 pc, , clamp for cross bracing suitable for rail/psc pole 400 kg 1 set 4 pc 3.6 kg, , 11kv v cross arm (100x50x6) 14.6 kg (galvanized) for psc pole 200 kg., , 11 kv pole top bracket (100x50x6) 2.1 kg for 200kg.psc pole (galvanized), , back clamp for 11kv cross arm for psc pole 200kg. 2.8kg, , 11kv dp channel 75x40x6mm 41.3 kg, , support clamp for 11 kv dp channel psc pole 200kg. 1sets 2pairs 4.4 kg, , 11kv tapping channel 75x40x6mm 21 kg, , side stay clamp 200 kg psc pole (galvanized) 1.08kg, , angle stay clamp 200 kg psc pole (50x8) 1.08 kg (galvanized), , 11 kv cross bracing for dp structure (50x50x6) 64.3 kg 1 set=4 pc, , clamp for cross bracing suitable for rail/psc pole 400 kg 1 set 4 pc 3.6 kg, , transformer base channel for dss 1set=2pc 52.63kg, , top channel for dss (100x50x6mm) 52.63kg 1set=2pc, , channel for hg fuse set 1set=-2pc 38.6 kg, , channel for ab switch (100x50x6mm) 52.63 kg 1set=2pc, , support clamp for dss 1set=2pair for 11 kv top, , channel/ab switch base channel/tr base channel & hg fuse set channel 9.6 kg, , transformer belting (50x50x6 mm) & belting support (40x40x6 mm) [galvanized] (52.3 kgs.), , lt distribution bus bar (35x35x6mm) 1set=2pair, , 33kv ab switch structure (549 kg)/set, , 11kv ab switch structure (549 kg)/ set, , 33kv post insulator structure (55 kg/)/set, , 11kv post insulator structure (55 kg)/ set

State Government

CTN :45127467

25 May, 2026 23.58 Lacs

Wayanad - Kerala

Tender For e tender for carrying out dyuthi ht works under electrical section muttil and meppady for the year 2025-26 - 1 standardisation of transformer structure es muttil 2 standerdisation of transformer under es meppadi partii labour contract

corporations/Associations/Others

CTN :45273364

04 Jun, 2026 NA

Vellore - Tamil Nadu

Tender For vedc-works contract for (i) extension of supply to 1no 3ph oht sc 7.5 hp load to the president murukambut panchayat ow proposed 1 no single pole dt structure namely ",pulikaranpatty oht ss-63 kva (ii) improvement proposal erection of 1no new distribution transformer single pole structure namely kamatchiyammanpettai colony ss 63 kva in respect of ae/o&m/k.v. kuppam section of vaduganthangal sub division of katpadi division of vellore edc through “e-tendering

corporations/Associations/Others

CTN :45263412

05 Jun, 2026 NA

Pudukkottai - Tamil Nadu

Tender For supply of 4500 sets of stay set complete - supply of silicagel blue, 0.6kva ups, stay set complete( quote price for single unit only), silicagel blue 10 to 12mm, pole pit for 9.0m and 9.14 m psc/rcc / all metal poles (each pit) 1.25 x 0.6 x 1.83 mtr, ordinary soil, semi rocky soil, heavy rocky soil where blasting/ cheseling required [specific approval should be obtained from concerned ee], stay pit, in ordinary soil [0.95 x 0.6 x 1.2m], semi rocky soil, stay pit in heavy rocky soil where blasting/ cheseling reqiured [specific approval should be obtained from concerned ee], erection of poles & stays (including refilling of excavated earth), erection of 7.5m / 8.0m poles [rcc / psc], erection of 9.00m / 9.14m rcc / psc/rail pole, tubular pole and all metal poles, stay set, erection stay set complete, stay erection without rod and pit, replacement of stay rod only. (including stay pit excavation & refilling & erection), replacement of guy shackle only in existing stay, erection of line materials, fixing of lt 1 ph "x" arm, fixing of lt/ht ti fitting, fixing of lt 3 ph "x" arm, fixing of 3[1/2] v ` x arm, fixing of 4[1/2] v ` x arm, fixing of 5 v x arm, fixing of tapping channel / guarding "x" arm, providing of line spacers in lt lines 1 phase, providing of line spacers in lt lines 3 phase, erection of ab switch with pt insulator & jumpering complete, erection of centre rotating switch ab switch complete, fixing of ht pin insulator / strain disc, 11 kv pin insulator with pin, 11 kv strain disc / polymer disc with hardware, 22 kv pin insulator with pin, 22 kv strain disc / polymer disc with hardware, 33 kv pin insulator with pin, 33 kv pin strain disc/polymer disc with hardware, fixing of lt pin insulator with pin, lt shakle with hardware, fixing of aluminium knob, paving stringing and sagging of conductor including binding of pin and proper tight [including transport of condutor from road side to work spot] per run, upto 7/2.59 mm acsr, 7/2.50 aaac including pvc cable upto 25 sqmm, acsr 7/3.35mm & 7/ 3.15 aaac including pvc cable above 25 sqmm, acsr 7/4.09 mm, above 7/4.09 mm acsr & dog conductor, earthing wiring and connection including transporting of earth pipe and excavation of pit], transformer structure earthing 10ft depth - 3 nos of pipe through tubes, dp earthing including all works [double side earthing], erection of 4th earth pipe including earthing, earthing of poles, earth pit masonary work 3 nos earth pits or using 3 nos concrete tub., replacement of detoriated earth pipe per location, concreting with mixture 1:3:6 [including all materials]., mass concreting for centre support for 2 feet including all materials, mass concreting for pole0.6x0.6x1.25m.with coping, sleeve concreting for pole 0.6 m x 0.6m x 0.3 m with coping, sleeve concreting for stay set 0.3 m & 0.75 long, erection of distribution transformer structure complete, excavation of structure pole pits 0.9 x 0.9 x 1.83 mtr, transporting of pole to pit location 2 nos., erection of poles 2 nos, excavation of stay pit 4 nos, erection of stay set (4 sets), mass concreting (cement:sand:jelly supplied by the contractor) 2 nos., erection of 22 kv ab switch, ttransformer structure earthing 10ft depth - 3 nos of pipe through earth tubes, erection of top channel, bed channel [2 nos channel] erection, cross with stud for bed channel erection, erection of belting angle / hg fuse angle, erection of hg fuse set, erection of ht las with jumpering and earthing, erection of lt las with jumbering and earthing, erection of jumpering [ht side], transformer wiring in lt side including jumpering bus bar etc., erection lt open type fuse unit arrangement single, erection lt open type fuse unit arrangement double, painting of stru. complete excluding dt [two coat of red oxide] all metal parts(excluding cost of paint)., painting of stru. complete excluding dt [one coat alu paint, excluding cost of paint), colour washing of 2 numbers structure pole [excluding

corporations/Associations/Others

CTN :45263455

02 Jun, 2026 2.97 Lacs

Kanyakumari - Tamil Nadu

Tender For works contract for execution of 1) thiru.r.rajkumar , nirappuvilai, thumbali ss1/100kva by providing 1no additional 63kva distribution transformer under puthukadai section,2)natural calamity estimate for the replacement of 2nos damaged 9 mtr psc pole at loc fi/3 orupilavilai ss and loc fi/1 in pilavilai ss and 1 no dt structure at thonadananvilai 25 kva, damaged due to falling of tree on 23.05.2025 and 26.05.2025 by new pole under puthukadai section,3)eos to one no new industrial service connection tf-iiib in the name of thiru. rajan v, r r engineering works, kunnamparai at abiya cashew ss/100kva area by providing 1 no distribution transformer 11kv/433/63kva under palliyadi section.

corporations/Associations/Others

CTN :45271860

03 Jun, 2026 1.19 Lacs

Kanyakumari - Tamil Nadu

Tender For works contract for execution of estimate for repainting of 11kv switch yard side channels and angles with aluminium paint in 110/11kv ss, marthandam 2.estimate for repainting of 11kv switch yard side rsj poles including 7 nos take off fabricated poles and 2nos rsj poles in station transformer structure with aluminium paint in 110/11kv ss, marthandam 3.estimate for repainting of 21 nos 11kv switch yard side rsj poles inside the substation with aluminium paint in 110/11kv ss, marthandam in kuzhithurai division

Roof Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors