Latest roof element Tenders | Government roof element Tenders

Central Government/Public Sector

CTN :45732098

02 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of one coach set of roof, sidewall and wall for lwlrrm pp2.2 shells to drawing number 1)roof assembly 83116001, col-1, alt 'nil' - 1 no 2) final roof element 83416016, col-1, alt 'b' - 1 no 3) final roof element 83416017, col-1, alt 'b' - 1 no 4) end roof assembly 58116066, col-1, alt 'h' - 1 no5) ss trough arrangement 83116015, col-1, alt 'nil' - 1 no 6) location of sidewall 83114001, col-1, alt'nil' - 1 no 7) end wall complete 83115001, col-1, alt 'b' - 1 no 8) end wall complete 83115002, col-1, alt 'nil' - 1 no for roof & side wall: firm shall fulfil the manufacturing facility as per icf/md/specn. 200, issue status 01, rev 04 with amendment no 01 for end wall:firm shall fulfil themanufacturing facility as per icf/md/spec315,issue status-01, rev.00 amendment no 01. . sidewall to be supplied without applying etch primer. special condition : packing as per icf/j&t/misc-2201, alt 'f'. safety instruction as per icf/j&t/sk-1867, alt. 'nil' packing for end wall as per drg. icf/j&t/sk-1809,alt 'a'[safety item] [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45706012

07 Jul, 2026 6.86 Lacs

Chandrapur - Maharashtra

Tender For providing and fixing 200 gsm hdpe tarpaulin covering over asbestos cement sheet/slab roofing of old type quarters of indira nagar colony and service buildings under ghugus sub area.

CTN :45697891

06 Jul, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of suppy and construction of ug amn bunker , steel roofing trough srt of sizes 1800mm , steel roofing trough srt of sizes 2400mm , indian standard medium beam , entrance canopy , isa 25mm x 25mm x 4mm , ms sheet 1 point 6 mm , nut and washer 8mm dia 25mm , ventilator , prefabricated steel door , round tor steel tmt steel bar 12mm , round tor steel tmt steel bar 8mm dia , ms binding wire , prefabricated gel earthing electrode , synthetic enamel paint og colour , synthetic enamel paint dark brown colour , taurpentine oil , red oxide primer , painting brush 100mm dia , oil bound distemper , weather coat exterior paint og , weather coat exterior paint brown , weather coat exterior paint yellow , ldpe film , hdpe sand bags , wpc , cement of 43 grade opc , river sand , aggregate 20mm graded , aggregate 40mm graded , hard core broken boulder , pcc solid bricks

CTN :45391321

02 Jul, 2026 NA

Bareli - Madhya Pradesh

Tender For corrigendum : supply of one coach set of roof assembly for lwaccn amrit bharat coaches ( without primer) as per drawing number: roof complete to drawing number: 829-1-6-001, col.-i alt. nil : 1 no alongwith final roof elements to drawing number: 827-1-6-010, col.-1 alt. nil: 2 nos., 827-1-6-011, col.-1 alt. nil: 2 nos & flat roof assembly to drawing number: 827-1-6-005, col.-1 alt. nil: 2 nos. note: drawing number: aaa51072 to be read as mvmc15013 alt. nil. the firm shall fulfill the requirement as per icf/md/specn.200, issue status-01, rev. 04 with amendment no.-01 & revised appended note for stainlesssteel roof assembly dated: 17.03.2025. special condition: a) packing instruction: mcf p1030-d ver. 0 b) dpt (dye penetration test) of roof complete to be performed at firm's premise by tpi. [ warranty period: 84 months after the date of delivery ] ]

State Government

CTN :45411968

29 Jun, 2026 35.00 Lacs

Doda - Jammu And Kashmir

Tender For corrigendum : construction of engineering workshop and testing lab including procurement of lab instruments at dam site of bhep. - earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed ordinary rock, 1 meter from cutting edge, providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1 :3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20 mm nominal size), steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level thermo-mechanically treated bars of grade fe-500d or more., filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m., centering and shuttering including strutting, propping etc. and removal of form work., lintel, beams, plinth beams, girders, bressumers and cantilevers., columns, pillars, piers, abutments, posts and struts., structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. welded, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, providing ridges or hips of width 60cm overall width plain g.s. sheets fixed with polymer coated j. or l hooks, bolts and nuts 8mm dia g.i. limpet and bitumen washers complete. 12.4.3 0.50 mm thick with zinc coating not less than 275 gram/m2, painting on g.s sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on new work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution., brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :cement mortar 1:6 ( 1 cement : 6 coarse sand), extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level, 15mm cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand), providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. with galvanized m.s. wire gauge with wire of dia 0.63 mm with 12 mm mild steel u beading, p/f in existing frames 30mm th

State Government

CTN :45688520

16 Jul, 2026 NA

Diglipur - Andaman And Nicobar Islands

Tender For supply of ordinary portland cement opc , natural river sand , pulverised stone dust , crushed stone aggregate , exterior grade acrylic weatherproof wall paint , oil based wood primer , cement primer , synthetic enamel paint , aluminium sliding door tower bolt , aluminium tower bolt , aluminium handle , mild steel pressed butt hinge , ceramic glazed floor tile , chequered terrazzo tile , hollow concrete cement block , clear float glass pane 5.5 mm thickness , mild steel casement stay straight peg type , cement fibre board 6 mm thickness , paint brush , pre-painted galvanized iron roofing sheet , mild steel wire nails , galvanized iron level adjusting hanger , self drilling screw , marine plywood 12 mm , mild steel flat , white portland cement , semi circular plain gs sheet gutter with gi nuts bolts and washer , plain ridge cap ppgi or galvanized steel sheet , tmt reinforcement steel bar , binding wire , mild steel l-angle , mild steel t-angle , industrial grade solvent thinner * /bid number : gem/2026/b/7712155 + /dated: 25-06-2026 ' ' / bid document 1 / 35

Central Government/Public Sector

CTN :45675451

30 Jun, 2026 NA

Multi City - Punjab

Tender For auction sale of depot ferrous scrap - scrap of stainless steel (ferritic) consisting of set of roof elements for lhb coaches. pl no-98051404

State Government

CTN :45645027

01 Jul, 2026 21.18 Lacs

Malappuram - Kerala

Tender For this building is a column framed structure with asbestos cement sheet roofing with pvc ceiling . this roof is damaged at many portions and leaks are appeared in the innerside of the building . ceiling is also falling down

State Government

CTN :45641709

29 Jun, 2026 4.99 Lacs

Jaipur - Rajasthan

Tender For supply of various ornammental items at designer kitchen of rajbhawan jaipur - supply of heritage look cast iron vertical column to support the shade structure. the complete column must be in cast iron with internal steel pipe of od76mm in 4mm thickness going through for strength. the pillar consists of bottom base of height 1170mm having base plate diameter 360mm with a spiral part of height 470mm and crown shape model on top of height 250mm. making overall height 2450mm. overall weight not less than 140 kgs. all the parts are grinded, primered and designed as per approved sample by engineer incharge, supply of ornamental cast iron spandrel (l-bracket) having length 460mm & height 400mm suitable to the coloumn pillars. all the parts are grinded, primered. all the designs & sample will be approved by engineer-in-charge, supply of the frieze (top panel) having the dimensions 320mmx210mm is mounted on steel pipe frame of size 40mmx25mm and all welding joints and gaps grinded and filled properly for smooth surface finish. all the parts are grinded, primered and approved by engineer in charge (length 7.50 feet = 1 frieze.., supply of floral design ms sheets in 3mm thickness. the design is cut out on fiber laser cutting machine using laser beam. the sheet is then properly grinded to give smooth surface finish. 6mm holes along with countering must be provided at every 2ft gapin the sheet for installation purpose., 81.5 x 5 , 81.5 x 4.5 , 80 x 5 , 96 x 5 , 95 x 5 , supply of traditional clay oven made of natural clay mixed with sand, hay and cow dung with smooth exterior in barrel or roundedcylinder shape. size 31" height & 25 " dia., supply of fire brick stone of size 600mmx300mm x75mm used for furnace lining, cement & lime kilns etc. it should have heal resistance > 1300 c & weight 25 kg to40 kg., supply of single groove roofing tile of clay material kelu of size 15"x9" thickness 15- 18mm & weight per kelu approx 2100 kg, colour red/brown/orange as per required by raj bhawan authority & approval by engineercharge, supply of land scaping colourfull natureal stone different colout red blue black white. as per requirement of site 5 to 15 mm in roudn oval shape and whitout sythetic coating

Central Government/Public Sector

CTN :45638113

20 Jul, 2026 NA

Kapurthala - Punjab

Tender For set of final roof element for ac 3 tier amrit bharat 3.0 with flat roof coaches, as per drawing: mp26freab3tf version 0, packing instruction: 1. the supplier shall pack the final roof element in a suitably designed returnable fixture in such a way thatfinal roof element shall not get scratched, damaged, twisted during transportation, storage and lifting and to avoid scratches on outer surface. it should be wrapped with enviroment friendly material and it should have standard clamping /fastening mechanism so that it can be opened easily. it should have firm's identification mark. 2. first returanable fixture along with final roof element be retained by rcf & this fixture shall be exchanged in the second lot supply and so on. at the end of the contact, the firm shall collect the remaining returnable packing fixture from rcf. 3. the packing fixture/frame to be fabricated having sufficient strenght to bear approximate 1 tonne load in static & moving condition of five coach set of final roof element. 4. the fixture /frame/pallet should be designed so that the packed final roof element preferably remain in horizontal position to minimize surface area. 5. it should also be suitable for storage of final roof element under open sky. [ warranty period: 30 months after the date of delivery ]]

Roof Element Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors