Latest roof frames Tenders | Government roof frames Tenders

corporations/Associations/Others

CTN :42063030

06 Oct, 2025 1.00 Crore

Kashipur - Uttarakhand

Tender For supply of electric slaughterhouse (for animals) - primary & secondary chamber primary chamber* single chmber furnace of size 4270 mm x 1980 mm x 1820 mm.* plate thickness- 5 to 8 mm.* lining of interior of furnace- 400 mm wall cermaic blanketk, high aluminia refractory brick is-8-1994 line with insulation brick is 2042-2006* operation temperature- 800o c to 1000o c.* top smoke discharge for secondary chamber.* ash removal doors to be provided for ash collection after combustion.* ingtion- automatic.* temperature control- automatic* material loading- front gate- automaticsecondary chamber* operating temperature - 1050o c to 1250o c.* material of construction- mild steel with high aluminia refractory brick is-8-1994 line with insulation brick is 2042-2006.* made from is 2062 grade mild steel materials (or better) duty lined with insulation bricks, refractory bricks, hysil boards.* burner mounting arrangement with refractory burner block.furnace door:furnace door charging & discharging side fabricated from 5mm to 6 mm thickness door opening & closing automatic.ash door:* ash door (with casted cement lining) to remove nonhazardous ash from the chamber.* top inlet bottom smoke discharge for longer gas residence time.* furnace door charging & discharging side fabricated from 5mm to 6 mm thickness.* door opening & closing automatic/manual.refractory:{complete set of refractory shaped bricks for construction electric cremation of i.s. 8 bricks (approx. 1007nos bricks,insulation 4000 nos. refractory slid for construction of flue duct , as required, refractory heat resistant fire clay , ceramic blanket hysil board, asbestos ropes etc. as required for outer side of the furnace shall be constructed by red bricks by sand and cement as mortars and construction of chimney from basement of roof level including painting i.e. bricks portion shall be painted by two coats of red oxide as primer and to coats of synthetic enamel. (a) complete lining & assembling of entire cremation chamber according to standard size with proper arrangement of accommodation of heating elements, resting of dead body with sufficient opening for falling of ashes to the ash chamber & sufficient ventilation for fresh air spraying. (b) complete lining and assembling of entire cremation chamber according to standard size with provision of drawing out aces from the rear side and sufficient ventilation for fresh air injection. complete lining and assembling of entire cremation chamber according to the standard size with provision of air inlet supplying by fresh air blower and arrangement of multi ventilation path for fresh air}. osspl make, thermocouple heat sensor supply & fixing the thermocouple of heat sensing range 0 - 1200 c (cr.-al) sensor housed in s.s 304 casing of dimension 1200 mm long 22 mm od complete encased to and fitted terminal on other and for connection of compensating of 2 cores 0.5 aq. mm cr- al for heat sensing from thermocouple to temperature controller covered with asbestos embedded rope about 50 m length as per direction of eic., f.d. fan/centrifugal air blower with electric motor * supply and delivery at site, installation, testing and commissioing.* of fresh air injection system forced draft fan mild steel.* type: centrifugal.* capacity:- 500 cmh.* pressure:- 220 mmwg.* motor rating:- 2hp (kirloskar/crompton), burner assembly * total 2 nos. of lpg/cng/png fired automatic burner required.* the burner should be provided with comprising diffuser plate/ burner plate, photo cell housing electrodes with holding brackets, solenoid valve, electrodes caps, flexible hose pipes, spary nozzles, oil filter, blower, etc. connected with electric motor (each burner) & in built air regulator.* burners will work on auto on/off as per the set temperature for the combustion chambers.* the in-built bolwer will provide continuous air flow to the burners to prevent demages due to high temperature., supply and fixing of manifold with a p

State Government

CTN :42134671

09 Oct, 2025 5.97 Lacs

Delhi - Delhi

Tender For replacing of damaged rcc tank by pvc water storage tank on roof of flat no. f-1, f-2, f-3, f-4, f-5, f-6 and f-7 i/c making steel structure plateform at dhaka complex, university of delhi

CTN :42141047

13 Oct, 2025 NA

Porbandar - Gujarat

Tender For -custom bid for services - shifting of khukri ship model , custom bid for services - foundation of ships with tiles , custom bid for services - 12 mm glass with steel channel , custom bid for services - steel structure of glass cabin , custom bid for services - roof and back side of cabin acp (588 sqft) , custom bid for services - refurbishment of khukri ship (paints and fabrication with stand) , custom bid for services - electric light and wiring and exhaust fan

CTN :42125180

22 Oct, 2025 17.81 Lacs

Multi City - Multi State

Tender For procurement of cat b stores - wire brush 8" x 3", coir brush size 8" x 3" wood base consisting of 3 long coir strands placed in brush arranged in 8 column and 4 rows, mason thread, ms wire nails, size: 1/1.5", as per 15-723, specification rust free, ms wire nails, size: 2/2.5", as per is-723, specification rust free, ms wire nails, size: 3", as per is-723, specification rust free, ms wire nails, size: 4", as per is-723-specification rust free, ms wire nails, size. 5", as per is-723 specification rust free, ms wire nails, size: 6", as per is-723 specification rust free, pbs roll 1mtr width x 1mm thick x 20 mtz roll, make: superior quality, rope manila 20mm dia, rope manila, 30mm dia, rope manila, 40mm dia, bow handle 6", bow handle 4, glass pane 6'x3x4mm,, make: saint govain/si certification marked, glass pane 6'x4'x5mm,, make: saint govain/si certification marked, glass pane 2 x 1 x 3mm, make: saint govain/is! certification marked, frosted glass panes 30 cmx30cmx4mm, frosted pin headed glass sheet 4mm 91 x 1 mir, glass putty, make: jk/birla, pvc mosquito proofing mesh 15 mir roll, wire mesh 3mm roll of 15mir, wire mesh 6mm roll of 15mir, wire mesh 10mm roll of 15m, wire mesh 12mm roll of 15m, wire mesh 20mm roll of 15m (welded mesh), hessian cloth 54" width, hinges 4", with screw, make:bita/golden/girson/diamond/isi, hinges 2" with screw, make bita/golden/girson/diamond/isi, hinges 3" with screw, make bita/golden/girson/diamond/isi, ms bolt hinges/ butt hinges (100mm long), ms bolt hinges/ butt hinges (75mm long), m seal 100gm, ms screw size: 20mm (3/4") (100 nos/pkt), ms screw, size: 25mm (1") (100 nos/pkt), ms screw, size: 50mm (2") (100 nos/pkt), ms screw, size: 75mm (2") (100 nos/pkt), ms screw, size: 100mm (4") (100 nos/pkt), green cloth, curtain ring, wall putty (20 kgs pack), make: jk/berger, weather coat exterior primer 20 ltr drum, sunmica top wooden finish, size: ext, sliding ball with screw size: 10inch, sliding bolt with screw size: 8inch, sliding bolt with screw size 12inch, door stopper, size: 140mm, item discription: aluminium alloy body and toungh, anodised with hard drawn steel spring fixed in floor, tower bolt size: 8, tower bolt size: 6, brass tower bolt barrel type 150mm, brass lower bolt barrel type 100mm, door window handle 100mm, door window handle 150mm, hydraulic door closer make: godrej, sand paper 80no, sand paper 120no, sand paper 60no, wood primer make: shalimar, varnish 1 lir pack make: asian/pidilite berger, looking mirror 450x800mm, make gold plus/saint gobin/modiguard, while cement (1kg pkt) make jk/birla, floor tiles 1'x1'x 10/12mm (ceramic/vitrified), make somany/jhonson/kajaria/nitco/orient, floor tiles 2 x2 x 10/12mm (ceramic/vitrified), make somany/jhonson/kajaria/nitco/orient, wall tiles 8" x 12' make, somany/jhonson/kajaria/nitco/orient, wall tiles 1' x 1' cerarnic/vitrified), make somany/jhonson/kajaria/orient, pvc false ceiling panels,, colour : white, size: 10x10 long 6-8mm thick, with gi channel and concealed fixing arrangement to roof truss and top side of panels all fitment complete., make: sarah/raunaq/equivalent, drill bit 20mm, drill bit 18mm., drill bit 12mm, drill bit 5mm, plastic rope size: 10mm, gi wire 4mm, cornfirming to is-280: 2006, gypsum screw size 1 (100 nos/pkt) pvc door (out to out size 0.85 x 1.90 mtr), frame 50 x 47 mm made out of 5 mm plan colour pvc sheet reinforce with ms square tube incl pvc shuller 30 mm thickconssting of frame made out of ms tube for top and bottom rail with pvc sheet strip 20 mm width suitable pvc steel bedding complete indis 100 mm ss hinge-30 nos a/u handle 125 mm-02 nos a/u tower bolt 150 mm -02 nos, stainless steel hasp and staple 100mm, door stopper (brass/ordinary type), magnate catch, (make:, amar/mahamaya/crown), gas sparker (gas lighter), gas pipe (lpg), hinges 1" width 3" length, stainless steel curtain rod 20mm dia 1.5mtr length, stainless steel bracket (for 20mm dia curtain rod), stainless steel nobe (for dia curtain 20mm dia),

corporations/Associations/Others

CTN :41508588

14 Oct, 2025 9.77 Crore

Pune - Maharashtra

Tender For corrigendum : request for bids for supply, installation and commissioning of slaughter house plant as per apeda standard - a: civil work items, dismantling the reinforcement cement concrete (r.c.c.) work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete., dismantling brick masonry in lime or cement mortar and stacking the material as directed with all leads, lifts etc., removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete., removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete., removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete, removing purlins from roof including stacking as directed with all leads , lifts etc. complete., removing rafters from roof including the materials as directed with all leads , lifts etc. complete., removing queen post truss from roof and stacking the materials as directed with allleads and lifts etc. complete, removing galvanized iron (g.i.) or asbestos cement (a.c.) sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete., excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.5 m.) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the excavated material upto distance of 50 meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.50 m) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the cubic meter (cu.m) excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift from 1.5 to 3.0m.) by mechanical means, excavation for foundation in soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (lift from 1.5m to 3.0 m.) by mechanical means, lift upto 3.0 m, excavation for foundation in hard-rock by blasting including cubic meter (cu.m) trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum watering, ramming etc. complete. (lift from 1.5m to 3.0 m) by mechanical means, filling in plinth and floors with approved excavated materials available at site in 30 cm layers include- ing watering and compaction with plate compactor to required proctor density etc complete., filling in plinth and floors with contractors material/brought from outside and approved by engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc. complete., providing dry trap / granite / quartzite gneiss 200 mm thick hard core metal spread in two layers each of 125mm thick crushed to 100 mm c

Central Government/Public Sector

CTN :41800462

15 Oct, 2025 1.44 Crore

Delhi - Delhi

Tender For corrigendum : repair of guniting work incl ceiling repair, joinery work of steel and aluminium, hardstanding sanitary and plumbing work incl roof and sunken treatment in the aor of age bandr kashmir house under ge new delhi

Central Government/Public Sector

CTN :41734940

08 Oct, 2025 40.00 Lacs

Bangalore - Karnataka

Tender For corrigendum : periodical services to internal and external surfaces along with certain repair works chajja repairs sainatry fittings floor wall tiles false ceiling roof sheets structural steel frame work and repair replacement of aluminium doors windows partition

Central Government/Public Sector

CTN :42058946

17 Oct, 2025 49.00 Lacs

Lucknow - Uttar Pradesh

Tender For repair / maint to wooden / steel / aluminium joinery, ceiling, roof treatment, plastering, plumbing works including internal wiring and other connected works at ch (cc) under ge e/m lucknow

Central Government/Public Sector

CTN :42078891

18 Oct, 2025 50.00 Lacs

Saharanpur - Uttar Pradesh

Tender For 8125/sar-t-59/2025-26 repair/ maint of plastering, tiling, plumbing, joinery, steel work, sheeting, roof treatment and certain miscellaneous items at restricted area at sg and pts (vikas) sarsawa under ge (af) sarsawa

Central Government/Public Sector

CTN :42116712

13 Oct, 2025 10.16 Lacs

Sohagpur - Madhya Pradesh

Tender For construction of 02 no. rcc wall for provide permanent side support and stabilization of the gallery walls in widen portion of side blasted gallery. for strengthening of roof dismantling of old rusty girder and fixing of new steel girders damini ug

Roof Frames Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors