Latest roof scrap Tenders | Government roof scrap Tenders

corporations/Associations/Others

CTN :45723624

02 Jul, 2026 6.00 Lacs

Salem - Tamil Nadu

Tender For supply delivery and fixing of motor and accessories at ward-1 selliyampalayam oht in narasingapuram municipality - supply and delivery of kirloskar make 15hp/11kw/2900rpm three phase/415v/50hz/ac/tefc horizontal centrifugal monoblock pump impeller-mechanical seal (head-20mtr,flow rate-2154lpm) size:100x100mm (local quotation) 15hp horizontal centrifugal monoblock pump, labour charges for erection of horizontal shaft, centrifugal pumpset (coupled/monoblock) in bore well/open well including fixing of suction pipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves,pressure gauges upto the exterior wall of pump room and erection of panel board consisting of tpic switches starter, voltmeter, ammeter, capacitor single phasing preventor and laying and jointing the cables and twinearthing as per ie rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports as required by eb authorities., three phase panel board star- delta with two level guard and auto start supply and delivery of star-delta starter confirming to is 13947, iec60947-1 and as amended thereafter with suitable kw rating for operation in ac/ three phase/50hz (+/- 5%) and 415v (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., ct operated ammeter (65 mm dia) with suppressed scale,voltmeter (65mm dia),voltmeter selector switch,miniature circuit breaker, thermal overload relay, air break contactors suitable for next standard higher kw rating, single phasing preventor, dry running preventor and on/off push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capa citor is to be taken separately). three phase panel board for 15hp, supply,delivery and fixing of the following materials are listed below etc..,as directed by the departmental ofiicers.for service4 core 16sq.mm pvc copper ug cable, for motor3 core 6sq.mm pvc insulated and sheathed flat type copper cable, 150mm di pipe, 100mm gi pipe , 100mm gi flange set, rubber sheet for flange set, ms bolt and nut20mm dia and above x 90mm to120mm length fully threaded bolts andwith nuts 2 nos. , manhole cover 60 x 60cm (heavy duty) with frame, supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary ms flange of table e , gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the departmental officers. 150mm sluice valve, 100amps 4pole mcb, 100amps porcelain fuse unit (500v), 32mm pipe

State Government

CTN :45706667

10 Jul, 2026 7.06 Lacs

Bhavnagar - Gujarat

Tender For installation of various instruments at lakhanka and hamirpara irrigation scheme - providing, supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anticorrosion finish. complete in all respects as directed by the engineer-in-charge. (1) 90° v-notch-20 x 40 secticin 15 lit/sec , providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in- charge. , providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc. c) concrete grade 1:2:4 and msa-40mm(graded)

State Government

CTN :45675162

01 Jul, 2026 NA

Nashik - Maharashtra

Tender For procurement of quick erect ms cup-lock type scaffolding for boiler at sinnar thermal power ltd, sinnar

CTN :45696784

06 Jul, 2026 10.00 Lacs

Kuchaman - Rajasthan

Tender For digital library in shree kuchaman pustakalay. kuchaman city - computer system setup (includes cpu, monitor, keyboard, mouse and accessories) cpuintel core i5- 08th gen processor with activated windows having 8 gb ram, 512 gb ssd, 450w power supplymonitor18" led 45 htz display having hdmi and vga portmouse and keyboardwired optical mouse and wired full numerical pyhysical keyboard(made of dell/lenovo/hp/asus), furniture counter (including table and chair) per personcounter: comfortable size for 20 persons having 32" heightchair: adjustable height wheel movable chair, air conditioners, split acs 1.5 tonwith installation and stabilizer(made of voltas/lg/samsung/lloyd), wi-fi router and internet connectionmulti network wi-fi router having high internet speed minimum 300 mbps, providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections power pressed from m.s. sheet and galvanised in accordance with zinc coating of grade 350 as per is : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to g.i. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to g.i. channel with connecting clips made out of 2.64mm diax230mm long g.i. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cut-outs made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the engineer in-charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum board conforming to is: 2095-part i,, brick work with modular fly ash lime bricks (falg bricks) conforming to is:12894-2002, class designation 100 average compressive strength in super structure above plinth level upto two stories in : cement mortar 1:6 (1 cement : 6 coarse sand), cement plastering including t&p, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 1:6 (1 cement : 6 fine/ coarse sand), distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and including priming coat with cement primer., providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete, p & f 1st quality heavy duty vitrified polished digital tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absorption less than or equal 0.08% and conforming to is 15622 of approved make in all colour and shade, laid with 20 mm thick cm 1: 4 including grouting the joints with white cement and matching pigment etc complete. size 600 mm x 1200 mm, providing and fixing fully panelled /partly panelled double leaf shutters frame for windows and ventilators as per approved design and drawings with approved steel fittings as per annexure a and width of styles, bottom and top rails 75mm including intermediate rails 50mm wide

State Government

CTN :45669079

08 Jul, 2026 7.24 Lacs

Amreli - Gujarat

Tender For installation of various instruments and monitoring system at vadi irrigation scheme - supplying, installing, testing, and commissioning of a v-notch weir mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge.with different sizes mentioned below: (1) 90° vnotch- 20 x 40 secticin 15 lit/sec, providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge., providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc (c) concrete grade 1:2:4 and msa-40mm(graded))

State Government

CTN :45669080

08 Jul, 2026 5.38 Lacs

Amreli - Gujarat

Tender For installation of various instruments and monitoring system at thebi irrigation scheme - supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss-304 / ss-316 plate with thickness of 3–5 mm, and be suitable for measurement ranges of approximately 0–50 l/s depending on notch angle. the weir shall have ±1% full-scale reading accuracy, operate under 5–100% humidity, temperature −20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge.with different sizes mentioned below: (1) 90° vnotch- 20 x 40 secticin 15 lit/sec, providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge., providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks ,centering ,scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc (c) concrete grade 1:2:4 and msa-40mm(graded))

State Government

CTN :45675246

07 Jul, 2026 5.87 Lacs

Amreli - Gujarat

Tender For installation of various instruments at raidy & dhataravdi-1 irrigation scheme - item no.1:- providing, supplying, installing, testing, and commissioning of a v-notch weir (mechanical flow measuring device) for measuring low flow seepage in dams. the device shall have a notch angle of 22.5°, 45°, 60°, or 90° depending on discharge range, a stainless steel ss- 304/ss-316 plate with thickness of 3-5 mm, and be suitable for measurement ranges of approximately 0-50 l/s depending on notch angle. the weir shall have ±1% fullscale reading accuracy, operate under 5-100% humidity, temperature -20°c to +60°c, and provide corrosion protection through anti-corrosion finish. complete in all respects as directed by the engineer-in-charge. (1) 90° v-notch-20 x 40 secticin 15 lit/sec , item no.2:- providing, installing and commissioning permanent ground control point (gcp) settlemnt marker comprising ms base plate (250×250×5 mm conforming to is 2062), gi riser pipe 25 mm dia (medium class as per is 1239), sand filling (clean river sand, loose), optional pvc/gi outer casing (min 100 mm dia), precast concrete cover (m20, 500×500×50 mm with central hole), ms/gi reference cap, and painting in black & white checkerboard pattern using weather-resistant enamel paint, complete with excavation, installation, alignment, and all materials, labour, tools, and accessories, suitable for survey works using total station / drone survey, complete as per specifications and direction of engineer-in-charge. , item no.3:- providing & laying in position 'nominal mix' cement concrete using cement sand and crushed aggregate by machine mix incl. necessary formworks, centering, scaffolding compaction by mechanical vibrator curing as directed with all lead & lift etc. (c ) concrete grade 1:2:4 and msa-40 mm(graded)

Central Government/Public Sector

CTN :44949096

27 Jun, 2026 48.17 Lacs

Jaduguda - Jharkhand

Tender For bid to ras tender for supply of internal external painting including repair works of 28 nos a type blocks at nwp : : - white washing with lime to give an even shade old work two or more coats , painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade one or more coats on old work , removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete , repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground all complete as per direction of engineer in charge with cement mortar 1 ratio 4 1 cement 4 fine sand , finishing walls with acrylic smooth exterior paint of required shade old work two or more coat applied at the rate 1.67 ltr per 10 sqm on existing cement paint surface , demolishing r.c.c. work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of engineer in charge. , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1 2 4 1 cement 2 coarse sand zone iii 4 graded stone aggregate 20 mm nominal size , steel reinforcement for r.c.c. work including straightening , cutting , bending , placing in position and binding all complete above plinth level. thermo-mechanically treated bars of grade fe 500d or more. , centering and shuttering including strutting , propping etc. and removal of form for lintels , beams , plinth beams , girders , bressumers and canti , providing and fixing double scaffolding system cup lock type on the exterior side of building structure , upto 25 metre height , above ground level , including additional rows of scaffolding in stepped manner as per requirement of site , made with 40mm dia m.s. tube

Corporations/Associations/Others

CTN :45662707

02 Jul, 2026 4.05 Lacs

Multi City - Karnataka

Tender For supply and maintenance of necessary materials for 7 pure drinking water units in bilagi town - item description: painting steel work with deluxe multi surface paint to give an even shade. two coat applied @ 0.90l/10 m² over an under coat of primer applied @ 0.80 l/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of engineer-in-charge.. (pwd sr v-2, 2023-24, item no-8.33.3, page no-46), item description: providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of engineer-in-charge..:(pwd sr 2023-24 / volumme ii / i.no-8.3.2 /p.no-41), item description: supplying and fixing rolling shutters of approved make, made of required size m.s. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to is: 4454 - part 1 and m.s. top cover of required thickness for rolling shutters. 80x1.25 mm m.s. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the engineer-in-charge.(csr 2023-24 v-2 itm no.11.6.1 pg 78), item description: dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of engineer-in-charge. for thickness of tiles 10 mm to 25 mm (pwd sr 2023-24 / volumme ii /i.no-19.22.1 /p.no-189), item description: providing and laying cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 ce ment : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size, including finishing complete as per engineer incharge (pwd sr 2023-24 / volumme ii / i.no-9.4 /p.no-59), item description: flooring with 25mm thick polished shahabad slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications.(pwd sr 2023-24 / volumme ii / i.no- 9.35 /p.no-64), item description: providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered upvc (matching to ral-9016) sections and with minimum tio2 (titanium dioxide) at 6phr with tpe(thermo plastic elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with galvanized iron profile through-out the window frame. the outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and sash with overall size of 39mm x 75mm with gi reinforcement of 2mm and mesh sash of size 37mm x 58mm. coextruded glazing bead for fixing of glass shall be of size 20mm x 24 mm. windows shall be provided with 6mm plain float glass, standard hardware& multi point locking system with touch lock. wall thickness of frame & sash shall be of 2mm-2.5mm. maximum possible size 2419mm x 2200mm (the cost is inclusive of all fixtures and separate charges for minor t&p s shall not be made) (pwd sr 2023-24/volumme ii/i.no-12.90 /p.no-110), item description: providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel prime

CTN :44925811

18 Jun, 2026 NA

Nagpur - Maharashtra

Tender For bid to ras corrigendum : supply of lpg work e e - sitc of lpg cylinder adaptors , sitc of gi lpg pipeline installation , sitc of suraksha lpg hose , sitc of gas pressure gauge , sitc of non return valve , sitc of gi ball valves , sitc of three burner stove , sitc of lpg regulator , sitc of cylinder manifold cage , sitc of flexible ss pigtails , sitc of sitc of manifold header pipe , sitc of sitc of cylinder connecting nipples , sitc of pilot line with isolation valve , sitc of gas flow meter optional , sitc of exhaust fan , sitc of auto-clean chimney , sitc of inline duct fan , sitc of exhaust fan louver , sitc of gi ducting , scaffolding , four number ms steel table top finished by granite stone ) /bid number : gem/2026/b/7447123 * /dated: 17-04-2026 & & / bid document 1 / 24

Roof Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors