Latest roof slab Tenders | Government roof slab Tenders

State Government

CTN :40222357

12 May, 2025 2.11 Lacs

Alappuzha - Kerala

Tender For general-w and c hospital alappuzha pump house repair -demolishing of existing roof slab of pump house and construction of new light roof -general civil work

Central Government/Public Sector

CTN :40214288

21 May, 2025 NA

Thanjavur - Tamil Nadu

Tender For provn of pol store at afs thanjavur - surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and as directed. excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth; for foundation etc or for shafts, wells, cesspits, manhole, pier holes, etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed. description all as per srl item no 3 here-in-before but depth exc 1.50m but not exc 3.0m complete all as specified and as directed. m&l pcc 1:4:8 type d-2 (using 40mm graded stone agg) as in foundation, filling and mass concrete complete all as specified and as directed. m& l brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cm 1:6 complete all as specified and as directed. m&l mild steel tmt bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. description all as per srl item no 7 here-in-before but for 6mm to 8mm dia complete all as specified and as directed. description all as per srl item no 7 here-in-before but for 5mm dia and over and including 10mm dia in stirrups spacers and binders complete all as specified and as directed. m&l rcc m-25 (using 20 mm size graded stone aggregate) as in foundation, including rafts, footings, foundation beams; plinth beams; bases for coloumns, etc basement slabs under reamed piles and mass concrete complete all as specified and as directed. m&l rcc m-25 (using 20 mm size graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed. m&l rcc m-25 (using 20 mm size graded stone aggregate) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. m&l rcc m-25 (20 mm graded stone aggregate) as in chajjas complete all as specified and as directed. m&l rcc m-25 (20 mm graded stone aggregate) as in beams, cantilvers, bressummers, lintels over 1.5m span complete all as specified and as directed. use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished complete all as specified and as directed. use and waste of formwork to sides of pillars posts, struts, piers, columns and stanchions finished the suface rough complete all as specified and as directed., use and waste of formwork to sides and soffits of floors or roof beams, beams haunchings, girders,bressummers lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams etc rough finished complete all as specified and as directed. use and waste of formwork to chajjas, troughts and similar items including edges rough finished complete all as specified and as directed. m&l form work with fair finished surfaces to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work nexc 200mm thick (horizontal or sloping) complete all as specified and as directed. supply only water proofing compound complete all as specified and as directed. s&f framed work as in door or gates of angle or other section with gusset plate, rails, braces, etc complete drilled for fixing of steel sheeting or other covering. doors to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) and hanging also fastening and fixing confirming to fe-410-w (gde e-250) quality "a" complete all as specified and as directed. s&f framed wor

Central Government/Public Sector

CTN :40217578

02 Jun, 2025 NA

Kothagudem - Telangana

Tender For supply of bricks , 10mm stone aggregates , 20mm stone aggregates , 40mm stone aggregates , coarse sand , fine sand , moorum filling material , portland cement , vitrified floor tile 60x60 cm , white cement , paint primer , distemper paint , acrylic smooth exterior paint , synthetic enamel paint , cement base wall care putty , roller brush , 100mm brush , tmt bar 12 mm 880 kg and 08 mm 250kg , binding wire , rectangular hallow section , gi plan sheet barge board upto 300 mm and gutter 600 mm over all girth , cgi precoated galvanised iron sheet , self screw , welding rod , 4 inch cutting blade , iron angle frame for door angle size 40x40x6 mm , wooden door 35 mm thick shutters , iron angle window with grill bar and glass panes fix with silicon complete all fitting accessories , tower bolt , handle , aldrop , calcium silicate reinforced with fibre and natural filler false ceiling tiles of size 595x595 mm , 4 mm dia steel wire rope lock u clamp set pu coated , aluminium with stainless steel ss coating 4 ftx 3 mtr mosquito net wire and meshs , 1.5 sqmm single core wire , 2 .5 sqmm single core wire , 6 amp switch , 6 amp socket 5-pin , 16 amp switch , 16 amp socket , ceiling rose , 1200mm ceiling fan , modular fan regulator , led tube light 20 watt , 16 amp single pole mcb , 32 amp double pole mcb , mcb box 8 way , pvc board size 9x8 inch , 25 mm casing capping , 25 mm casing capping clip , screw 1.5 inch , 6 mm pvc gatti , pvc 6 way board , insulation tap , contractor mason labour and electrician charges for construction of barrack size 20 feet x 60 feet and 5 feet veranda with brick wall plastering floor tiling false ceiling work etc bid number/ & ( * ) : gem/2025/b/6195629 dated/ + : 03-05-2025 bid document/ 2 2 1 / 43

Central Government/Public Sector

CTN :40211722

28 May, 2025 NA

Kothagudem - Telangana

Tender For supply of bricks , 10mm stone aggregates , 20mm stone aggregates , 40mm stone aggregates , coarse sand , fine sand , moorum filling material , portland cement , vitrified floor tile 60x60 cm , white cement , paint primer , distemper paint , acrylic smooth exterior paint , synthetic enamel paint , cement base wall care putty , roller brush , 100mm brush , tmt bar 12 mm 880 kg and 08 mm 250kg , binding wire , rectangular hallow section , gi plan sheet barge board upto 300 mm and gutter 600 mm over all girth , cgi precoated galvanised iron sheet , self screw , welding rod , 4 inch cutting blade , iron angle frame for door angle size 40x40x6 mm , wooden door 35 mm thick shutters , iron angle window with grill bar and glass panes fix with silicon complete all fitting accessories , tower bolt , handle , aldrop , calcium silicate reinforced with fibre and natural filler false ceiling tiles of size 595x595 mm , 4 mm dia steel wire rope lock u clamp set pu coated , aluminium with stainless steel ss coating 4 ftx 3 mtr mosquito net wire and meshs , 1.5 sqmm single core wire , 2 .5 sqmm single core wire , 6 amp switch , 6 amp socket 5-pin , 16 amp switch , 16 amp socket , ceiling rose , 1200mm ceiling fan , modular fan regulator , led tube light 20 watt , 16 amp single pole mcb , 32 amp double pole mcb , mcb box 8 way , pvc board size 9x8 inch , 25 mm casing capping , 25 mm casing capping clip , screw 1.5 inch , 6 mm pvc gatti , pvc 6 way board , insulation tap , contractor mason labour and electrician charges for construction of barrack size 20 feet x 60 feet and 5 feet veranda with brick wall plastering floor tiling false ceiling work etc bid number/ & ( * ) : gem/2025/b/6191353 dated/ + : 02-05-2025 bid document/ 1 1 1 / 43

State Government

CTN :40222545

12 May, 2025 36.40 Lacs

Alappuzha - Kerala

Tender For this work consists of concrete columns for foundation, solid block work for walls, rcc roof slab, electrification, plumbing, furniture ,computer networking and demolishing of existing village office building.

CTN :40217330

24 May, 2025 2.40 Lacs

Baramulla - Jammu And Kashmir

Tender For supply of natural sand confirming to is 383 1970 specifications for coarse and fine aggregates. , aggregate 5mm mm stone aggregate to be crushed rock or gravel 5mm , add mix , m sand , aggregate 10 12.5 mm mm stone aggregate to be crushed rock or gravel 10 12.5mm

State Government

CTN :40206508

12 May, 2025 36.40 Lacs

Alappuzha - Kerala

Tender For this work consists of concrete columns for foundation, solid block work for walls, rcc roof slab, electrification, plumbing, furniture ,computer networking and demolishing of existing village office building.

Corporations And Associations And Others

CTN :40200555

13 May, 2025 48.62 Lacs

Delhi - Delhi

Tender For supply and installation of open gym equipments under mplads funds for various locations of parks in municipal corporation of delhi - supply & installation of open gym equipments under mplads funds for various locations of parks in municipal corporation of delhi, seated puller /pull chair made from c class g.i pipe. dimensions: - 1900mm (length) x 740mm (width) x 1920mm. (height). safe area:- 1.2mtr x 3mtr. seated puller equipment made up of c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the center pipe is of 100nb made from c class g.i. pipe. bottom support is of m.s. round plate of dia 250 mm & 10mm thickness welded. all linkages are made up of 25nb c class g.i. pipe. the handle frame is of 32nb c class g.i. pipe. the seat frame is of 32nb c class g.i. pipe. to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush used. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class. welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. foundation cover closing cap is made from injection moulded plastic lldpe / hdpe. the seats and back rests are fitted on the outer frames are made up of m.s. sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.closing caps are made up of from injection moulded plastic lldpe / hdpe.pins used of diameter 25mm and 17mm are made up from sae 8620 bright material. the bearings used are of 6205 2rs1 and 6203 2rs1 permanent lubricated sealed bearing of reputed brand.high tensile steel with galvanized nuts & bolts are used for assembly.thecirclips used for assembly are of a16. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel / berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size), seated puller /pull chair made from c class g.i pipe. dimensions: - 1900mm (length) x 740mm (width) x 1920mm. (height). safe area:- 1.2mtr x 3mtr. seated puller equipment made up of c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the center pipe is of 100nb made from c class g.i. pipe. bottom support is of m.s. round plate of dia 250 mm & 10mm thickness welded. all linkages are made up of 25nb c class g.i. pipe. the handle frame is of 32nb c class g.i. pipe. the seat frame is of 32nb c class g.i. pipe. to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush used. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class. welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. foundation cover closing cap is made from injection moulded plastic lldpe / hdpe. the seats and back rests are fitted on the outer frames are made up of m.s. sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.closing caps are made up of from injection moulded plastic lldpe / hdpe.pins used of diameter 25mm and 17mm are made up from sae 8620 bright material. the bearings used are of 6205 2rs1 and 6203 2rs1 permanent lubricated sealed bearing of reputed brand.high tensile steel with galvanized nuts & bolts are used for assembly.thecirclips used for a

State Government

CTN :40212743

14 May, 2025 12.14 Lacs

Rourkela - Odisha

Tender For improvement to utkalamani homeopathic medical college and hospital at rourkela such as grading plaster to roof slab with provision of tar-felting

State Government

CTN :40195872

15 May, 2025 1.00 Crore

Chhota Udaipur - Gujarat

Tender For supplying and stacking various type of building, road & other construction materials, at various places of taluka kawant under taluka panchayat, kawant under mgnrega (annual unit rate) 2 of 2025- 2026 - supplying and stacking cement (i.s.i.53 grade opc), white cement, coarse sand, coarse sand 5.0 k.m., coarse sand 05 k.m. - 10 k.m., coarse sand 10 k.m. - 15 k.m., coarse sand 15 k.m. - 25 k.m., coarse sand 25 k.m. - 50 k.m., coarse sand 50 k.m. - 100 k.m., fine sand, fine sand 5.0 k.m., fine sand 05 k.m. - 10 k.m., fine sand 10 k.m. - 15 k.m., fine sand 15 k.m. - 25 k.m., fine sand 25 k.m. - 50 k.m., fine sand 50 k.m. - 100 k.m., supplying and stacking brick aggregate 40mm size, supplying and stacking brick aggregate 40mm size 5.0 k.m. lead, supplying and stacking brick aggregate 40mm size 05 k.m. - 10 k.m., supplying and stacking brick bats 20mm, supplying and stacking brick bats 20mm 5.0 k.m. lead, supplying and stacking brick bats 20mm 05 k.m. - 10 k.m., supplying and stacking common burnt clay bricks conventional size, supplying and stacking common burnt clay bricks conventional size 5.0 k.m. lead, supplying and stacking common burnt clay bricks conventional size 05 k.m. - 10 k.m., supplying and stacking fly ash brick, hand broken stone aggregate 25mm size to 90mm size, hand broken stone aggregate 25mm size to 90mm size 5.0 k.m., hand broken stone aggregate 25mm size to 90mm size 05 k.m. - 10 k.m., hand broken stone aggregate 25mm size to 90mm size 10 k.m. - 15 k.m., hand broken stone aggregate 25mm size to 90mm size 15 k.m. - 25 k.m., hand broken stone aggregate 25mm size to 90mm size 25 k.m. - 50 k.m., hand broken stone aggregate 25mm size to 90mm size 50 k.m. - 100 k.m., hand broken stone agg. 40mm size to 63mm size, hand broken stone agg. 40mm size to 63mm size 5.0 k.m., hand broken stone agg. 40mm size to 63mm size 05 k.m. - 10 k.m., hand broken stone agg. 40mm size to 63mm size 10 k.m. - 15 k.m., hand broken stone agg. 40mm size to 63mm size 15 k.m. - 25 k.m., hand broken stone agg. 40mm size to 63mm size 25 k.m. - 50 k.m., hand broken stone agg. 40mm size to 63mm size 50 k.m. - 100 k.m., crushed stone agg. for hard quality 10 to 20mm size, crushed stone agg. for hard quality 10 to 20mm size 5.0 k.m., crushed stone agg. for hard quality 10 to 20mm size05 k.m. - 10 k.m., crushed stone agg. for hard quality 10 to 20mm size 10 k.m. - 15 k.m., crushed stone agg. for hard quality 10 to 20mm size 15 k.m. - 25 k.m., crushed stone agg. for hard quality 10 to 20mm size 25 k.m. - 50 k.m., crushed stone agg. for hard quality 10 to 20mm size 50 k.m. - 100 k.m., crushed stone agg. for hard quality 40mm size, crushed stone agg. for hard quality 40mm size 5.0 k.m., crushed stone agg. for hard quality 40mm size 05 k.m. - 10 k.m.

Roof Slab Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors