Latest roof vent Tenders | Government roof vent Tenders

Central Government/Public Sector

CTN :45736563

01 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of 1. stainless steel roof ventilator to drg.no. (018) wlrrm-7-3-405, alt "k", col.i.- 1 no 2. locking strip to drg no lg16260 - 4 nos special condition : suitable packing to be done to prevent damage during transit, unloading and rust prevention during storage. [ warranty period: 30 months after the date of delivery ] ]

CTN :45291636

03 Jul, 2026 NA

Pithoragarh - Uttarakhand

Tender For corrigendum : supply of suppply of 05 x bathroom block as per rfp , cement , column , truss , main purlins , roof , ventilators , all elect items as per rfp , all items as per rfp

State Government

CTN :45688520

16 Jul, 2026 NA

Diglipur - Andaman And Nicobar Islands

Tender For supply of ordinary portland cement opc , natural river sand , pulverised stone dust , crushed stone aggregate , exterior grade acrylic weatherproof wall paint , oil based wood primer , cement primer , synthetic enamel paint , aluminium sliding door tower bolt , aluminium tower bolt , aluminium handle , mild steel pressed butt hinge , ceramic glazed floor tile , chequered terrazzo tile , hollow concrete cement block , clear float glass pane 5.5 mm thickness , mild steel casement stay straight peg type , cement fibre board 6 mm thickness , paint brush , pre-painted galvanized iron roofing sheet , mild steel wire nails , galvanized iron level adjusting hanger , self drilling screw , marine plywood 12 mm , mild steel flat , white portland cement , semi circular plain gs sheet gutter with gi nuts bolts and washer , plain ridge cap ppgi or galvanized steel sheet , tmt reinforcement steel bar , binding wire , mild steel l-angle , mild steel t-angle , industrial grade solvent thinner * /bid number : gem/2026/b/7712155 + /dated: 25-06-2026 ' ' / bid document 1 / 35

corporations/Associations/Others

CTN :45653686

07 Jul, 2026 NA

Thrissur - Kerala

Tender For auction sale of steel flashes and piercings,shot blast dust,steel turnings and borings with mud,steel turnings and borings without mud,titanium turnings and borings,titanium flashes,titanium rejected forgings,aluminum flashes,aluminum end cuts,miscellaneous scrap,scrapped ss roof ventilators,rejected forgings,rejected drive wheels,empty and broken 210 ltr metal drum,scrapped cast iron doors,scrapped carbide rotary burr cutter,scrapped carbide cnc inserts,used carton boxes,scrapped chain sling,broken and damaged brass shim/sheet,broken and damaged copper shim/sheet,scrapped brass sleeve

Central Government/Public Sector

CTN :45638279

26 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of one number of ss roof ventilator grill assembly to drg.no.329-4-4-069, alt-nil with powder coating in colour shall be ral 9003(signal white). [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45367498

27 Jun, 2026 NA

Delhi - Delhi

Tender For corrigendum : providing of custom bid for services - addition & alteration construction of bio-chemistry lab at second floor. - dismantaling and disposal work; (a) first floor roof existing fibre sheet removal and disposal (16x5)feet , (b)second floor(bio chemistry) existing brick wall 9" th. dismantling and disposal , ( c) existing window removal (6x4'-6") , (d) existing floor dismantling and disposal , " 6.4.1 brick work with common burnt clay f.p.s (non modular) bricks of class designetion 7.5 in superstructure above plint level in all shapes and sizes in cement mortar1:6(1cement 6 coarse sand) " , plaster inside 12mm with 1: 6 ratio with fine sand , external plaster 15mm 1 :4 ratio 18mm cement plaster in two coats under layer 12 mm thick cement plaster1:5 ( 1cement :5 coarse sand ) and a top layer 6mm thick plaster , providing and laying reinforcement work , providing and laying rienforce cement concrete in retaining walls including attatched pilasters, colmns,piers,abutments pillars,posts,struts,buttresses,string,or lacing courses,parapets,coping,bed blocks,anchor blocks window sills ,fillllets,sunken floor etc.up to floor five level ,excluding the cost of centering ,shuttering ,reinforcement and finishing (5.2.2) , floor and roof protection work ;(4.20a.2.2) concrete of m15grade with minimum cement content 240kg/cum , 11.49.2 floor tiles; providing and laying full body vitrifiedtile in floor of minimum thickness 15mm with water absorption less than 0.06% and confirming to is:15622,of approved make, brand and manufacturer.laid on 20 mm thick cement mortar 1:4 . including grouting the joints with white cement /matching grout size600x600 , skirting , structural steel work welded in built up sections /framed work including cutting ,hoisting ,fixing in position and applying a priming coat of approved steel primer using structural steel .(250x125) , "red stone for slab providing sand stone slab for roofing and laying them in cement mortar1:4 ( 1 cement : 4 coarse sand ) over wooden karris or rcc battens or structural steel section (karries or battens or or structural steel. " , providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: , counter slab stone work , 8.2.2 . providing and fixing 18mm thick gang saw cut mirror polished, premoulded and prepolished,machine cut for kitchen platforms ,vanity counters,window sills ,facias and similar locations of required size approved shade ,colour and texture laid over20 mmthick base cement mortar, joint treated with white cement mixed matching pigment,including rubbing curing ,moulding and polishing of edges excluding hosting and transportation , counterslab stone skirting , providing edge moulding to 18 mm thick marble/granite stone counter,vanities etc. , p\ fteak wood frame ,providing wood work in frames of doors windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasterners of requireddia and length( hold fastlugs or dash fastenershall be paid for separetely. , p\f flush door , providing and fixing is markedflush door shutters confirming to is ;22029 part 1) non decorative type core of construction with frame of first class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters (9.21.1) 35 mm thick including isi markedsteel but hinges with necessary screws , fixing of aluminium window with all necessary at site available at site , providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. , distempering with 1st quality acrylic distemper (ready mixed) having voc content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : , finishing walls with acrylic sm

CTN :45576480

22 Jun, 2026 NA

Bareli - Madhya Pradesh

Tender For supply of set of roof panels for 3-phase memu/tc coaches. coating type pu paint system to mdts-118,colour shade to ral-9001,matt finish gloss value 10-12 at 45degree,ventilator duct grill to ral ds 240 70 05 as per lno.md22151 dated 18.06.19 & 09.07.19. as per design office l.no. md21896 dated 03/10/2022 mdts-133 rev. 05 is applicable in lieu of icf/md/spec-167a mentioned in the drawings as per set list no-: mcfmprp3-phtc version 0. colour shade ral-9001 with matt finish gloss value 10-12 at 60 degree for frp ceiling panels however colour shade for roof ventilator shall be ral ds 240 70 05. packing instruction no.pi112 ver2.0. [ warranty period: 78 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45592866

23 Jun, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl no. 98090800 ferrous scrap consisting of condemned and unserviceable coach partitions, foot steps, vestibule foot plates ,dust shield springs, cut bits of angles / channels/ pipes/plates , partition weld meshes, plates cutups, beedings, t channel cutups, fully corroded under frame cutups with foot step attachments, pipe attached frame coach cutups, regulator frame cutups, battery box frames ,eft boxes, regulator frame cutups, door handles,angles/ channels/ flat less than 4 feet, shutters, pipes, body part pillars, tubes, panel sheets, trough floor sheets, gi sheets, rolling shutters ,roof ventilators, cut parts of vrla boxes, dust bins, fan guards,fl fittings, filters, battery box cutups, panel frame cutups, luggage frames without wood [wood removal permitted], seat frames without wood [wood removal permitted], coach fl fitting covers, tg covers, motor covers, loco air ducts, iron beading,corroded plates , flat angles,window grills,welded meshes, coach toilet drain tubes clamps, switch boxes, regulator boxes, hoop iron, spring cushions,cut binding wires, name boards, sign boards, earthen bonds full/broken, corroded reservoirs, fan covers, and similar items bazaar in nature.all the above items are with/without meger/negligible qty of non-ferrous attachments.

CTN :45550671

15 Jun, 2026 NA

Multi City - Multi State

Tender For supply of set of roof panels for 3-phase memu/tc coaches. coating type pu paint system to mdts-118,colour shade to ral-9001,matt finish gloss value 10-12 at 45degree,ventilator duct grill to ral ds 240 70 05 as per lno.md22151 dated 18.06.19 & 09.07.19. as per design office l.no. md21896 dated 03/10/2022 mdts-133 rev. 05 is applicable in lieu of icf/md/spec-167a mentioned in the drawings as per set list no-: mcfmprp3-phtc version 0. colour shade ral-9001 with matt finish gloss value 10-12 at 60 degree for frp ceiling panels however colour shade for roof ventilator shall be ral ds 240 70 05. packing instruction no.pi112 ver2.0. [ warranty period: 78 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45451264

19 Jun, 2026 NA

Budgam - Jammu And Kashmir

Tender For tender for supply of main column of rhs 122x61x3.6 mm (9.67 kgsperrm) , 3.0m length each conforming to is 4923.2017 , truss the principle rafter and the bottom chord shall be fabricated out of rectangular steel hollow sections of size 96mm x 48 mmx 3.6 mm (8.00 kg per rm) with 1 by 2 slopes. all other strut members will be fabricated out of rectangular steel hollow sections of size 66mm x 33 mm x 3.2 mm (4.07 kg per rm). conforming to is 4923.2017 , side runner made of shs 45x45x2.6mm thick having two pales at both ends 45x90x6mm with two holes of dia 12mm welded on either ends between column to column for fixing u chanel for pir panels , purlin will be fabricated out of rectangular steel hollow sections of size 80mm x 40 mm x 3.6 mm (6.40 kgperrm) with cleats welded at both the ends conforming to is 4923.2017 , extention purlin shall be of 450mm long fabricated out of rectangular steel hollow sections of size 80mm x 40 mm x 3.6 mm (6.40 kgperrm) with cleats welded at both the ends conforming to is 4923.2017 , sun shade frame with sheet- sunshades shall be made out of 0.50 mm thick camouflage pattern colour coated steel sheet conforming to is 14246-2024 (or is 277-2018 reaffirmed 2022 for base galvanized sheet) fixed with angle iron frame of isa 40 x 40 x 5 mm (3.0 kgperrm) conforming to is 808-2021. , roofing sheets - 0.50 mm thick ppgi camouflage pattern (is 14246-2013) of size 3000x1060mmx0.50mm zinc coating 120 gsm (is 277-2018). self-drilling hex washer head fasteners (hot-dip zinc). , false ceiling supporting angle - ms 65x65x5 mm for placing of puf 40mm thick length - 4180mm , false ceiling supporting l-section of 50 x 50 x 5mm thick (3.80 kgperrm) fixed appropriately to the truss for placing of puf 40mm thick length - 3000mm , wall puff panel of size (1000 (w) x 3000 (ht) , 40 mm 0.50 mm colour-coated gi both sides , camouflage ext per off white , tongue & groove interlocking , conforming to is 16203- 2016 , partition wall puff panel of size (1000 (w) x 3000 (ht) , 40 mm 0.50 mm colour-coated gi both sides , bothside off white colour (intperext) , tongue & groove interlocking , conforming to is 16203- 2016 , puff panel for ceiling portion of size (1000 (w) x 3000 (ht) , 40 mm 0.50 mm colour-coated gi both sides , bothside off white colour (intperext) , tongue & groove interlocking , conforming to is 16203- 2016 , main external door - size 1000x2100 mm (01 no) 2 mm thick aluminium frame (is 1948-2024). shutter- 40 mm puf (0.50 mm ppgi both sides , . fittings- 4 nos magnetic hinges (100 mm hd) , 2 al sliding bolts (300 mm) , al tower bolt (200 mm) , 2 d-handles , 1 helical door spring , door closer (is 208-1996) , padlock + 2 spare keys. canopy 1300x450 mm with isa 35x35x3 mm frame. , internal doors - size 750x2100 mm (06 nos) 2 mm thick aluminium frame (is 1948-2024). shutter- 40 mm puf (0.50 mm ppgi both sides. fittings per door- 4 magnetic hinges (100 mm hd) , 1 al sliding bolt (300 mm) , al tower bolt (200 mm) , 2 d-type handles (150 mm). , fixed upvc window - 1000x450 mm (01 no) installed at ht 2.1 m from ffl. upvc frame & shutter thick (is 17953-2023). double glazed- 5 mm + 10 mm air + 5 mm toughened safety glass (is 2553 pt 1-2018). fixed gi wire mesh 18-20 g , (is 4948-2002). anodised aluminium grill on outer side (is 733-1983). rubberperneoprene packing for weather tightness. , ventilators with exhaust fan - 250 mm sweep (06 nos) 4 nos in toilet cubicles + 2 nos in bathroom cubicles. upvc frame 2 mm thick (is 17953-2023). shutter- 4 mm frostedperpinhead dg upvc fibre glass , drop-flap type , opens internally. fittings- hinges , eye hooks , tower bolt 100 mm (is 15833-2009). fly-proofing- ss wire mesh aperture on upvc outer frame. exhaust fan 200 mm with louver pre-cut at factory. , inner corner flashing 50x50x3000mm , 0.5mm thick , bird cover flashing 50x250x3000mm , 0.5mm thick , outer corner 3100mm x 200mm x 200mm , ridge cover 2400mm x 300x300mm , top & bottom u flashing 40x40x65x1.5mm thi

Roof Vent Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

corporations/Associations/Others

Central Government/Public Sector

State Government

Central Government/Public Sector