Latest room blower Tenders | Government room blower Tenders

Central Government/Public Sector

CTN :42145415

27 Oct, 2025 NA

Delhi - Delhi

Tender For supply of machine room blower including motor and duct for wag-9 locomotives as per clw spec no- (i) clw/es/3/0020 alt-h or latest, (ii) rdso spec/e-10/3/09 (motor) with amendments nos. 01 to 06, or latest.

Central Government/Public Sector

CTN :42145914

13 Oct, 2025 NA

Ahmedabad - Gujarat

Tender For supply of single row deep groove ball bearing 6205 zz suitable for scavenging machine room blower.

corporations/Associations/Others

CTN :42063030

06 Oct, 2025 1.00 Crore

Kashipur - Uttarakhand

Tender For supply of electric slaughterhouse (for animals) - primary & secondary chamber primary chamber* single chmber furnace of size 4270 mm x 1980 mm x 1820 mm.* plate thickness- 5 to 8 mm.* lining of interior of furnace- 400 mm wall cermaic blanketk, high aluminia refractory brick is-8-1994 line with insulation brick is 2042-2006* operation temperature- 800o c to 1000o c.* top smoke discharge for secondary chamber.* ash removal doors to be provided for ash collection after combustion.* ingtion- automatic.* temperature control- automatic* material loading- front gate- automaticsecondary chamber* operating temperature - 1050o c to 1250o c.* material of construction- mild steel with high aluminia refractory brick is-8-1994 line with insulation brick is 2042-2006.* made from is 2062 grade mild steel materials (or better) duty lined with insulation bricks, refractory bricks, hysil boards.* burner mounting arrangement with refractory burner block.furnace door:furnace door charging & discharging side fabricated from 5mm to 6 mm thickness door opening & closing automatic.ash door:* ash door (with casted cement lining) to remove nonhazardous ash from the chamber.* top inlet bottom smoke discharge for longer gas residence time.* furnace door charging & discharging side fabricated from 5mm to 6 mm thickness.* door opening & closing automatic/manual.refractory:{complete set of refractory shaped bricks for construction electric cremation of i.s. 8 bricks (approx. 1007nos bricks,insulation 4000 nos. refractory slid for construction of flue duct , as required, refractory heat resistant fire clay , ceramic blanket hysil board, asbestos ropes etc. as required for outer side of the furnace shall be constructed by red bricks by sand and cement as mortars and construction of chimney from basement of roof level including painting i.e. bricks portion shall be painted by two coats of red oxide as primer and to coats of synthetic enamel. (a) complete lining & assembling of entire cremation chamber according to standard size with proper arrangement of accommodation of heating elements, resting of dead body with sufficient opening for falling of ashes to the ash chamber & sufficient ventilation for fresh air spraying. (b) complete lining and assembling of entire cremation chamber according to standard size with provision of drawing out aces from the rear side and sufficient ventilation for fresh air injection. complete lining and assembling of entire cremation chamber according to the standard size with provision of air inlet supplying by fresh air blower and arrangement of multi ventilation path for fresh air}. osspl make, thermocouple heat sensor supply & fixing the thermocouple of heat sensing range 0 - 1200 c (cr.-al) sensor housed in s.s 304 casing of dimension 1200 mm long 22 mm od complete encased to and fitted terminal on other and for connection of compensating of 2 cores 0.5 aq. mm cr- al for heat sensing from thermocouple to temperature controller covered with asbestos embedded rope about 50 m length as per direction of eic., f.d. fan/centrifugal air blower with electric motor * supply and delivery at site, installation, testing and commissioing.* of fresh air injection system forced draft fan mild steel.* type: centrifugal.* capacity:- 500 cmh.* pressure:- 220 mmwg.* motor rating:- 2hp (kirloskar/crompton), burner assembly * total 2 nos. of lpg/cng/png fired automatic burner required.* the burner should be provided with comprising diffuser plate/ burner plate, photo cell housing electrodes with holding brackets, solenoid valve, electrodes caps, flexible hose pipes, spary nozzles, oil filter, blower, etc. connected with electric motor (each burner) & in built air regulator.* burners will work on auto on/off as per the set temperature for the combustion chambers.* the in-built bolwer will provide continuous air flow to the burners to prevent demages due to high temperature., supply and fixing of manifold with a p

CTN :42140799

13 Oct, 2025 NA

Sonitpur - Assam

Tender For supply of hmpbca015601013 pedestal , hmpbca015601019 motor foundation belt , hmpfbfa015602031 pedestal bearing , hmpfbfa015602032 return roller , hmpfbfa015602036 tail pulley , hmpfbfa015602039 gathering gear box , hmpfbfa015602058 take up pedestal bearing , hmpsca015603061 tail roller , hmpsca015603063 pedestal , hmpsca015603065 carrying roller , hmpsca015603066 return roller , hmpsca015603072 v pulley , hmpsca015603077 vertical roller , hmpceao15605097 blower , hmpdmda015606115 exhaust blower , hmptrao15608141 trunnion roller , hmpdba015610163 nozzle rod , hmpdba015610167 impeller , hmppdca015611186 v belt , hmpppa015612198 valve , hmpppa015612202 hose pipe , hmpppa015612203 pump , hmpppa015612208 level gauge , hmpppa015612209 filter , hmpmfua015613213 pump flange , hmpmfua015613217 hydex coupling , hmpbtao15614240 hot oil pipe , hmpbtao15614241 hot oil pipe , hmplocao15616254 tail roller , hmplocao15616255 take up bearing , hmplocao15616256 pedestal , hmplocao15616259 return roller , hmplocao15616260 v belt , hmplocao15616262 motor , hmplocao15616263 reduction gear box , a0hmp001156307 bitumen blower cum burner , hmppcua015618293 pulley , hmppcua015618294 pulley , hmppcua015618296 pedestal , a0hmp00115618305 ldo pump ) /bid number : gem/2025/b/6720932 * /dated: 02-10-2025 & & / bid document 1 / 30

Central Government/Public Sector

CTN :42133579

04 Oct, 2025 NA

Multi City - Chhattisgarh

Tender For scope of work (sow) as mentioned in tender and schedule of work( 22 )items as given below ,[1] assy of slab rack & change 18.000 ea,[2] fabrication of inclined rail and change 20.000 ea,[3] chng of brker assy & g/box of 162 & 163 8.000 ea,[4] chng,lt wheel 8.000 ea,[5] streng,platform plate 2.000 ea,[6] fitg,fixg,strl,motor w/gear box 2.000 set,[7] alignment,hoist g/box 4.000 ea,[8] hoist,rope 10.000 set,[9] const,repair platforms 2.000 le,[10] fab,down comer 50.000 to,[11] ern,down comer 45.000 to,[12] disman,wind box,downcomer 50.000 to,[13] lvlg,furnace air blower,no:1,2 5.000 to,[14] replcg,booster fan casing&duct of sp-i 5.000 le,[15] assly & repl. of support roller of pmd 8.000 set,[16] assly& changing of gear box of smd 2.000 ea,[17] assly & changing of thrust roller of smd 4.000 set,[18] assly & repl. of support roller of smd 8.000 set,[19] making & changing of thrust roller of pm 4.000 set,[20] assly & repl of priimary gearbox of pmd 2.000 ea,[21] assly & repl of secondary gearbox of pmd 2.000 ea,[22] making & changing of keep plate & packer 4.000 ea

Central Government/Public Sector

CTN :42127408

15 Oct, 2025 NA

Kota - Rajasthan

Tender For supply of blower fan motor having double end extended shaft for rmpu of lhb type

Central Government/Public Sector

CTN :42127039

10 Oct, 2025 NA

Ahmedabad - Gujarat

Tender For supply of scavange blower to mr blower (scmrb) including motor

Central Government/Public Sector

CTN :42127203

29 Oct, 2025 NA

Bhusawal - Maharashtra

Tender For supply of blower for traction motor

Central Government/Public Sector

CTN :42127168

14 Oct, 2025 NA

Ludhiana - Punjab

Tender For supply of bearing 6208 zc3 for machine room blower motor (de side / nde side)

Central Government/Public Sector

CTN :42127795

03 Nov, 2025 NA

Ajmer - Rajasthan

Tender For supply of 16 amp, 415v ac, 3-phase contactor, coil voltage 110v ac, with 2 no + 2 nc contacts, suitable for condenser fan motor, heater, and blower motor of rmpu ac coaches, similar to bch make catalogue no. ce 15 dn 3a or equivalent. conforming to rdso specification no. elps/spec/ac/04 (rev-3) with amendment no. 1.accepted make: siemens, abb, schneider, and bch only, or any other rdso-approved make.

Room Blower Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors