Latest rope net Tenders | Government rope net Tenders

CTN :45329379

16 Jun, 2026 NA

Bandipora - Jammu And Kashmir

Tender For stage contract for supply of workshop/line material as and when required during financial year 2026-27 or till next contract gets finalised - electrical store/workshop items/: as per is standards and kpdcl approved vendors only wherever applicable, bush rods 12mm(lt) of standard make, bush rods 19mm(lt) of standard make, bush rods 25mm(lt) of standard make, bush rods 30mm(lt) of standard make, ht bush for dts of standard make(33/11kv as per requirement and relevant is), lt bush set for 250kva dt of standard make, lt bush set for 63kva dt of standard make, lt bush set for 100kva of standard make, aluminum thimbles 95sqmm of standard make, aluminum thimbles 120sqmm of standard make, aluminum thimbles 185sqmm of standard make, aluminum thimbles 240sqmm of standard make, aluminum thimbles 300sqmm of standard make, soldress clamp for 630kva, soldress clamp for 400kva of standard make, soldress clamp for 250kva of standard make, soldress clamp for 100kva & 63kva, gi channel/angle/flat/clamps of sizes (as per requirement), gi v cross-arm with top bracket including clamp(2 nos), 11 kv gapless surge arrestor,9 kv ,10 ka ,la with polymer housing, stn. type, 11kv go, ab switch 3-phase, 3-pole, 200 amp, vertical type, 11 kv horn gap fuse set 3 phase 200a, 11 kv heavy duty link set (polymer) line type with 6mm copper blade and 02 no. 8ft. gi channel, clamps and nuts and bolts, 11 kv pin insulators (polymer/porcelain) with pins(5kn), 11kv polymeric composite disc insulator 12kv,min failing load 45kn, lighting impulse 75kv positive and 80kv negative, creepage distance 320mm, lt shackle with mukhi clamps including gi nuts & bolts, gi nuts & bolts of sizes with full thread, manilla rope, gi wire 8 swg, suspension/tension clamp with eye hook as per kpdcl standards, insulating piercing connector (10-95sqmm), straight through cable jointing kit for 35/50sqmm ltab, straight through cable jointing kit for 75/95/120sqmm ltab, heat shrinkable outdoor cable termination kit, 50sqmm lt ab cable (3x50+1x16+1x35) sqmm xlpe (1.1kv, 3+1c, al), 35 mm ab (ht) cable (3x35+1x35 mm ) xlpe, dpc aluminium of sizes 13/14/16/18swg of standard make, super enamelled(se) of sizes 13/14/16/18/21swg of standard make, lathoride paper 10 mil of standard make, exchange of 1kg fresh al dpc by scrap dpc, exchanege of 1 kg fresh bush rods by scrap bush rods, lathoride paper 20 mil of standard make, ht paper 3 mil of standard make, hard card board 1/1.5/2/3mm of standard make, fiber tubes of standard make, cotton tape/ nawar of standard make, cork washers (32x12)5mm, cork washers (50x28)5mm, cork washers (110x74)5mm, cork washers (45x20)5mm, cork washers (60x32)5mm, cork washers (70x45)5mm, cork washers (90x50)5mm, cork sheets(24x36) 3 mm, cork sheets(24x36) 4mm, cork sheets(24x36) 5mm, cork strip(40x3) mm, cork strip(40x5) mm, oil seals for 250kva of standard make, oil seals for 100kva & 63kva of standard make, m seal, cotton tap 1" size (length 35 meter), nawar tap 1 size 35 meter long, tape roll pvc, old saree/doti cloth, insulating gum of standard make, aluminum strip of sizes (3/6, 3/7, 4/8, 4/10 mm etc ) of standard make, rubberized cork sheet 4mm thick, 2 feet *3 feet, rubberized cork sheet 3mm thick, 2 feet *3 feet, ht brown paper 3.0/2.5 mil, packing sheet (1mm)press card board 1/2/3mm, synthetic enamel paint grey colour, varnish dr.beck/empire, glass wool sleeves of sizes, fevicol, backlite tubes 1/2 inch,(1mtr length), packing gutties, electrical grade kraft paper,4mil, rubber washers ( m-12 ht oil seal),, rubber washers ( m-12 lt oil seal),, rubber washers ( m-16 lt oil seal),, rubber washers ( m-20 lt oil seal),, rubber washers ( m-25 lt oil seal),, rubber washers ( m-30 lt oil seal),, fiber glass sleeves 2mm, fiber glass sleeves 3mm, fiber glass sleeves 4mm, fiber glass sleeves 5mm, fiber glass sleeves 6mm, fiber glass sleeves 8mm, fiber glass sleeves 10mm, fiber glass sleeves 12mm, fiber glass sleeves 15mm, oxygen cylinder for welding with water c

CTN :45321939

16 Jun, 2026 19.43 Lacs

Murshidabad - West Bengal

Tender For procurement of different spares for chinese make elevators under emiph-i, sgtpp. - procurement of different spares for chinese make elevators under emiph-i, sgtpp., limit switch,car door contact,type:ds131 for seec express elevator 1no, ue-230vac/110vdc, ie-2a/0.5a, ui/ith-500v/10a, ip20, transparent enclosure ( please follow additional data: model: s3-1370b: normal close make: beto or model: ndox 41k ), shoe liner car guide shoe liners # shoe liner(car guide shoe liners) 1set/4pcs e.c.e ( please follow additional data: guide shoe; moc: nylon; dimension: 150mm x 30mm x 30mm (as per sample) ), landing door shoe for ece make elevator acme make: fermatorrn ( please follow additional data: door chanel shoe, dimension: 56mm x 40mm; thickness: 2mm with both side rubber. (as per sample) ), v belt, a 1180 ( please follow additional data: belt, qxpz 1180 cogged raw edge epdm wedge belt, fenner ), belt, timing, 3600-s8m-15, htd for seec express elevator car door type- high torque drive (htd) timing belt, length-3600mm, width-15mm, belt thickness- 5.6mm, tooth height-3.4mm, tooth pitch-8mm, material-neoprene rubber withfiber glass core., reed switch ( please follow additional data: for elevator (as per sample), sichuan express elevator co. ltd. ), vfd for car door astar s2 20p4a2 power 0.4 kw,i/p 220vac,50/60 hz,5.3 a,o/p 220vac,0-50 hz,3a.0.6 kva, oil pot(at feeder on car top) ( as per sample ), hooter industrial 230v ( with power back-up for sichuan express elevator co. ltd. ), rotary blower fan for elevator # ( car roof fan, crossflow fan, model: zqf-330 200, 230v ac, 25w, 1270/1350 rpm, 340/360 m3/hr ; make: ningbo grand fans co. ltd. ), switch,red,1no,call push button dia-37mm for seec express elevator 24vdc, illuminated, colour- red, flush mount ( landing: up/down-25 nos., car: open-close-15 (each); 1-5: 10 (each); 6-9: 5(each) ), board, lop,intl 2000-dv/v1 for seec express elevator sichuan express elevator co. ltd., door sensor (lambada),model:ms720 ( make- t l jones or equivalent ), rope oil for elevator rope usha wrl-60 usha martin, brake coil for hoist,230v ac ( please follow additional data: brake coil for sichuan express elevator co. ltd., coil voltage: 110v dc (as per sample) ), dynamic braking unit,cdbr-4030b,400 v yaskawa vvvf drive cimr f7a4030,30 kwfor s/r vvvf drive, expansion pcb for elevator intl 2000-ex sichuan express elevator co. ltd.

CTN :45332729

12 Jun, 2026 5.00 Lacs

Saharanpur - Uttar Pradesh

Tender For supply of hardwar items - wooden hand wire brush 3 inch x 6 inch , teflon tape , rustolene pidilite make 500ml , holdite 500 gm pack , grinding wheel ag 4 inch carborandum universal make , grinding wheel ag 7 inch carborandum universal make , brasso liqued in tin of 100 ml , araldite in 1.80 kg pack , emery cloth in 500 sheet fine carborandum universal make , emery cloth in 500 sheet rough carborandum universal make , emery tape 50 mtr roll size 2 inch fine carborandum universal make , emery tape 50 mtr roll size 2 inch roughcarborandum universal make , cotton waste , m seal 1 kg pack , blue tube 15ml , piano wire , graphite powder fine , hacksaw blade , marken cloth , gulli grinder , grinding wheel 2inch , grinding wheel 4inch for ag 4 grinder , grinding wheel 7inch for ag 7 grinder , buffing wheel 4 inch for ag 4 grinder , buffing wheel 7 inch for ag 4 grinder , cutting wheel 4inch for ag 4 grinder , cutting wheel 7inch , cutting wheel 14inch , silicon brazing rod size 3mm , klinger make b-9 borocilicate gauge glass , stainless steel plate , anabond 112 thread locker , loctite 609 retaining compound in 50ml , loctite 641 retaining compound in 50 ml , emery paste rough , emery paste fine , brass rod , boiler gauge glass , solenoid valve with coil two way , solenoid valve with coil one way , stag jointing paste , galva coating gcs 73 , grinding wheel black for bench grinding machine , grinding wheel green for bench grinding machine , usha martin make steel wire rope , love joy coupling set l-70 , love joy coupling set l-75 , love joy coupling set l-90 , love joy coupling set l-100 , love joy coupling set l-110 , spring washer bbbb make , spring washer , split pin champion make , anabond 666 , leather hand gloves , rubber star for coupling set l-70 , rubber star for coupling set l-75 , rubber star for coupling set l-90 , rubber star for coupling set l-100 , rubber star for coupling set l-110 , ring spanner set 6mm to 32 mm taparia make , d spanner set 6mm to 32 mm taparia make , paint brush , red oxide primer british paint asian make , g p thinner , borex powder , graphite fire crucible 120 kg , ss flat grade 304 , silver brazing flux , gauge glass sleeve , gauge glass rubber cone , hardware item 1 , hardware item 2 , hardware item 3 , hardware item 4 , hardware item 5 , hardware item 6 , hardware item 7 , hardware item 8 , hardware item 9 , hardware item 10 , hardware item 11 , flexible hand grinder , rubber hose pipe 1 , rubber hose pipe 2 , rubber hose pipe 3 , rubber hose pipe 4 , rubber hose pipe clamp , wire rope clamp , high temperature putty , full link coupler , half link coupler , bearing 1 , bearing 2 , bearing 3 , bearing 4 , bearing 5

CTN :45314251

01 Jun, 2026 NA

Jind - Haryana

Tender For supply of general purpose items - anabond 666 (jbb220) 100gm each, angle grinding wheel 4" ag4 (jtt160) 6 100 (make- bosch (philippines), angle grinding wheel 7" (jnb289), bosch (philippines), angle grinding wheel ag-5 (jms277) , bosch( philippines), araldite[big size], (jms09),1 set = 1 kg + 0.8 kg, blue tube paste, (jgs171), 20gm each, break liner 75mmx10mm, (jms34), coconut rope 1/4, (jgs37), cotton waste, (jms339), milky white colour, emery cloth, (jnb272), fine, ajax, colour gray, universal carborundum, emery cloth rough, (jnb276), ajax, colour gray, universal carborundum, emery paste coarse (rough), (jms203), 400 gm each, universal carborundum, emery paste fine, (jnb341), 400 gm each, universal carborundum, flap disc 4", (jnb298), for buffing, gasket shellic compound, 50 ml each, graphite powder, gritless, 1 kg each packing, hacksaw blade 1/2"x12",(jtt197), hss hand hacksaw blade 24 tpi, miranda, holdite, (jnb275), 500 gm each, pidilite, lock tite 574, (jnb310), molykote d-32, (jnb311), namda, (jeos191), flat namda, size 1/2", old cycle tube,(jgs123), old dhoti, (jnb271), cotton stuff, full length- 5 mtrs, width - 1mtrs, rubber cord 8 mm, (jeos209), neoprin mixed rubber cord, stag b-red (jointing paste), (jnb326), 400 gm each, taplon tap [ bld ], (jbm228), champion, white lead zinc, (jnb340)

CTN :45321993

01 Jun, 2026 NA

Panipat - Haryana

Tender For rc/purchase of workshop tool / general consumables material part-2 > - flat/triangular/half round/round/sqaure file both rough and fine all sizes, make- jk, flat/triangular/half round/round/sqaure file both rough and fine all sizes, make- miranda, needle file set, make- jk, hss bolt tap set mm/bsf/bsw all sizes make- totem, hss tool bit all sizes, make- miranda, hss tapered shank drill/hss central drill/ hss die nut/hss bolt tap all sizes, make addidon, knurling tool, h.s.s end mill cutter, size- 10mm, h.s.s end mill cutter, size- 12mm, carbide insert turning holder left and right side v shape, size- 10 inch, carbide insert tool holder ( insert size-1/4 inch), carbide insert tool, v-shape, v nmg 160404 size-1/2 inch, carbide insert boring tool, holder size- 10 inch, stone cracker tool for roller tip cracker, carbide insert tool holder (insert size-1/4 inch), carbide insert tool, v-shape, v nmg 160404, size-1/2 inch, roller grooving tool with angular carbide tip 350angle, size- 40mm x 40mm x 12 , make- sandwik/precision, roller grooving tool with angular carbide tip 400angle, size- 40mm x 40mm x 12 , make- sandwik/precision, roller meshchart grooving tool with 8mm x 50mm sq carbide tip, size: 40mm x 40mm x 12 , make:sandwik/precision, roller meshchart grooving tool with 6mm x 50mm sq carbide tip, size: 40mm x 40mm x 12 , make:sandwik/precision, en-8 rod, size-32mm, length-6 mtr (m.t.c required), en-8 rod, size-38mm, length-6 mtr (m.t.c required), en-8 rod, size-45mm, length-6 mtr (m.t.c required), en-8 rod, size-50mm, length-6 mtr (m.t.c required), en-8 rod, size-60mm, length-6 mtr (m.t.c required), en-8 rod, size-65mm, length-6 mtr (m.t.c required), en-8 rod, size-70mm, length-6 mtr (m.t.c required), en-8 rod, size-80mm, length-6 mtr (m.t.c required), en-8 rod, size-100mm, length-6 mtr (m.t.c required), en-8 rod, size-120mm, length-6 mtr (m.t.c required), en-8 rod, size-125mm, length-6 mtr (m.t.c required), en-8 rod, size-150mm, length-6 mtr (m.t.c required), m.s round, size-12mm (per kg), m.s round- size 18mm (per kg), m.s round- size- 25mm (per kg), brass rod, od: 2 inch-6 inch, length- 3 mtr, (mtc required), en-45 flat (per kg) size- 10mm x 60 mm, m.s square bar (per kg) size- 10 mm x 10 mm, en-45 spring steel flat (per kg) size: 50 x 6mm, en-45 spring steel flat (per kg) size: 50 x 8mm, en-45, spring steel flat (per kg) size: 65 x 8 mm, en-45, spring steel flat (per kg) size: 75 x 8 mm, carbon flat 8 mm x 50mm, carbon flat 6 mm x 50mm, fencing wire netting width- 6 feet length-50 feet thk 3mm hole size- 2 inch x 2 inch, rubber tapper plug, size-42x45mm, union joint, size:1/4 , union joint m-30 (req for 30mm od tube), ferrule-30mm (req for 30mm od tube), rubber rope 3mm, rubber rope 5mm, scotch brite pad, g.i rivit: size- 8 x 25mm, kassi (good quality), belcha (good quality), shovel (good quality), suza, sutli (per kg), copper sheet, size: 1000 x1000x 3mm (28kg), m.s nipple both end threaded size- 1/2 x 9 , m.s nipple both end thread, size-3/4 x 12 c-class, m.s nipple both end threaded size- 1 x 8 , m.s nipple both end threaded size- 10mm x 8 , m.s nipple both end threaded size- 20mm x 8 , m.s nipple both end threaded size- 15mm x 8 , m.s nipple both end threaded size- 40mm x 8 , m.s nipple both end threaded size- 2 x 8 , m.s nipple both end threaded size- 2.1/2 x 8 , m.s nipple both end threaded size- 3 x 8 , pvc pipe 6mm (transparent) (per mtr), d-cycle, cap: 1 ton, heavy duty, make-usha martin, d-cycle, cap: 2 ton, heavy duty, make-usha martin, d-cycle, cap: 3 ton, heavy duty, make-usha martin, d-cycle, cap: 5 ton, heavy duty, make-usha martin, d-cycle, cap: 10 ton, heavy duty, make-usha martin, d-cycle, cap: 25 ton, heavy duty, make-usha martin, steel wire rope sling steel core size- 1 x 5 mtr x 9 eye size, steel wire rope sling steel core size- 3/8 x 5 mtr x 9 eye size, steel wire rope sling steel core, size- 32mm (6 core) x 6.6 mtr length x 28 soft eye with pressed sleeve, steel wire rope sling steel core, size- 32mm

CTN :45137525

28 May, 2026 80.0 Thousand

Pilibhit - Uttar Pradesh

Tender For corrigendum : supply of hard castable brand holdite compound in std packed 500 grams tin , braso 100 ml pack , thread locker 112 number in std pack tin 50 ml anbond make , araldite set in std packed 1800 g , mahindra and mahindra m seal , cotton waste colouerd , carborundum universal make emery cloth fine , carborundum universal make emery cloth rough , carborundum universal make emery tape roll in 50 meter length size 2inch fine , carborundum universal make emery tape roll in 50 meter length size 2inch rough , carborundum universal make emery paste packed in 400 grams tin rough , sap make hexa blade low alloy size 1by2inch by 12inch , grinding wheel ag 5 , grinding wheel ag 4 , grinding wheel ag 7 , anabond 666 , universal make split pin size 1by4inch by 2inch , pinano wire size half mm , namda size 12mm thick and 1 mtr width , rubber cord size 7 mm , rubber cord size 8 mm , coconut rope 10mm , bamboo 4inch thick by 24 ft long

CTN :45140769

02 Jun, 2026 NA

Siang - Arunachal Pradesh

Tender For corrigendum : supply of writing pens (q4) , pads for rubber stamps (v2) conforming to is 4747 (q4) , poker or awl as per is 10375 (q4) , electronic calculator (v2) (q4) , black lead pencils (v3) conforming to is 1375 (q4) , paper clips (v2) conforming to is 5650 (q4) , eraser (v2) (q4) , self adhesive flags (v3) (q4) , glue stick (v3) (q4) , markers and highlighters (q4) , coir rope (q4) , tags for files (v3) conforming to is 8499 (q4) , dak pad (v3) (q4) , file/folder (v3) (q4) , photography paper conforming to is 6139 (q4) , metric scale (v2) conforming to is 1480 (q4) , metric steel scales (v3) conforming to is 1481 (q4) , paper weights (v2) (q4) , correction fluid pen(v3) (q4) , binder clips (v3) conforming to is 8231 (q4) , paper punch machine(v2) (q4) , sketch pens (v3) (q4) , stationery scissors (v2) conforming to is 989 (q4) , manual pencil sharpener (v3) (q4) , staplers(v3) (q4) , staple pins/staples(v3) (q4) , carbon papers (v2) (q4) , paper pins (v2) conforming to is 5653 (q4) , stationery holder/pen stand(v3) (q4) , mechanical pencil (v3) (q4) , pen refill (v3) (q4) , colour pencil (v2) (q4) , register (v2) (q4)

Central Government/Public Sector

CTN :45325964

03 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap and unserviceable condemned mix m.s. coach cutting items & various types of similar items such as , body side door m.s., p.o.h. coaches realised corroded pieces,air brake,clamp,pipe pin,m.s. door of battery box ,m.s.ventilation door,foot plate,ice box,m.s. spring,m.s. angle,and m.s. lader with rubber coating,coach cuttings, coach doors , seat frames , bearth/seat frames, light head stock cuttings, train lighting fittings,, side lamps lamp hand signal, fittings, tail lamp fittings, cft/tl light fittings, ictp/ icfp empty swich boxes tail lamps, tube light fittings, tube light jali, fan blades, fan jali, fan guards fan ribs, fan rings, empty power pannels, signal platform, destination board, valley board, letter board,ms signal base, loc, inercooler, nut bolts and other hardwares, m s furniture.m s wheel stand,window grill, ms measuring cans, tins, racks, break pipes, silencer of tower wagon, dust bin, ms pipe and cut pcs. of ms pipes, rods, ms bars released from broken constructin, compressor spring, wire /coil springs, ms rope wire, pcs. of brake beam pipes, stands, m s ferrous light junk kachra related scrap i.e ms angles, chanels, flats pcs. of cable racks/laders ms brackets, dust bin stand, tin fuse box, fire extinguisher, empty glow sign boards, empty electrical pannel, ms stand, oven, earthing patti, empty cable tray, fly catcher, galvanized patra / sheet and their cut offs, cut pieces of ms cupboards, rack etc, plain/ corrugated / toughened sheets and its cut pcs. such as strips, patties, patties, patra, rings, coils, boxes, ms brake control cover, patra, angle, small springs, pins, wire, electric point, shunt signal unit and post. signal ladder , location box, earth electrode , signal post and base , signal unit, point roddings , junction route indicator and cut pieces in mijscellaneous, coil, collapsible doors and shutters and their parts/cut offs, grills , channel grills, compound /bridge jali with or without frame, ms fencing and their parts, fencing patties, angle pcs., frames,wire mesh, g.i./ms pipes and tubes , tubes and their cut pcs, damaged gi/ ms pipes/ rods/ tubes and their pcs. , ms/galvanised boxes, junction box, switch boxes, empty convertor, payary (steps), filters, rings, nut bolts, u clips, pipe pin, gate m/c dismentled, liquid container, damaged video boxes and their cut offs, crt cabinet, location boxes , jumper, jumper box,ground connections , basket steel, water cane/ material carring trolley,steel baskets, containers, trays, frames, stretchers, nets/ jali , released ground connection, halogen, panto pans, compressor spares, dust guard, air filters and filter covers, ms/gi duct and its parts,insulating armature of signal cable, hand lamps, side lamps, signal lamps petromax, hs lamp, clamps, signal post,signal platform, signal base, ms/ gi wire/ coil, funnels, wall protectors, boxes, iron bar pcs released from broken construction , desmantelled weighing machines parts/ covers etc. ms pipe with or without ci attachment, bins, plates, rings, spares/ parts /body of weighing machine , platform weighing machine and its parts, pressure switches and other switches , signal parts, location boxes,panel board,fuse box,mdb board,pedestial for lc gate and their cut parts and other ferrous miscellaneous scrap items with or without minor nf/ss/ wooden / rubber / rexine attachments of sorts and sizes, broken and damaged, u/s for rly. use, excluding items: rail and rail pcs., axles and axle pcs., wheel tyre and pcs., cam shafts, helical springs, bolster springs, buffer plungers, face plates, axle box housings/ casings, brake beams, fish plates, screw couplings/draw bar hooks, break beams, reservoir tanks, st sleepers and other various types of similar ms items etc. note: 1. hammering/ pressing/ cutting is permitted for easy loading only, 2. if found any non-ferrous item will not be delivered (qty approx)

State Government

CTN :45289932

29 May, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

CTN :45313370

02 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - lot no. m.mf-10. exmp.d.05.2026-27.04 description - scrap junk/ kuchra (any ferrous scrap disintegrated through rust or corrosion, tin & galvanized sheets strips & cuttings commode chutes, refuse receptacles), heavily corroded & disintegrated sleepers and pieces etc., all kinds of rusted corroded drums scrap expanded metal and wire mesh. (our offer) corrosion tin and galvanised sheets, strips and cutting rusted gi pipes, rusted and corrugated wire rope, packing strips, chair, revolving chair, fire extinguisher, drum, location box, almirah, expanded metal and all types of torque rod etc., chairs along with or without negligible nf, plastic, rubber & nylon attachment as in the lot. materials are lying in one place at "d-3" sector and one place at ?d-6? sector. before bidding, bidders are requested to inspect the lot. cutting & pressing allowed only the odd shape materials for loading purpose. loading will be done by purchaser own arrangements.

Rope Net Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government