Latest ropes Tenders | Government ropes Tenders

State Government

CTN :45327429

30 May, 2026 2.98 Lacs

Jodhpur - Rajasthan

Tender For providing and fixing of various electrical accessories at district and session court metro jodhpur - sitc of ip20 smd mid power led batten type integrated light fixture made from powder coated extruded aluminium housing with in built driver , system lumen efficacy 110 lm/watt output only at cw (5700k to 6500k) , internal surge protection of 4.0 kv with short & open circuit protection ,thd 10% , p. f. 0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000 k / 4000 k / 5700 k /6000 k/6500 k (as per ansi bin) as required., 1170mm(+/-10%) led batten with min. lumen output 2200 lm, sitc of ip-20 led recessed / surface mounted, round / square backlit & smd mid power led downlight with power coated die-cast aluminum housing with uv stabilized non yellowish diffuser with bis compliance 4.0 kv surge protected isolated driver, with short & open circuit protection input 320vac-48 hr protection, input 350vac-2 hr protection), having efficiency > 85% . system lumen efficacy of 110 lm / watt,at cw (5700k to 6500k) , thd 10 % , pf. 0.95, cri >80, life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000 k / 4000 k/ 5700 k /6000 k/6500 k (as per ansi bin) as required., recessed mounting, minimum lumen output 1950 lm, sitc of ip20, 2x2 led surface/ recessed mounting backlit & smd mid power type led light fixture not less than 35 mm housing depth made from crca sheet steel housing, high purity / transmissivity uv stabilized non -yellowish diffuser for uniform light distribution. operating voltage range 140-285 v, hv cutoff - lv cutoff should be 300-100v . high efficiency with 4 kv internal surge protection bis certified isolated driver having efficiency > 85% , with short & open circuit protection ( input 320vac-48 hoursprotection,input 350vac-2 hours protection) (integral with light fixture). system lumen efficacy of 120 lm/watt ,thd 10 % , p.f. 0.95,cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000 k / 4000 k / 5700 k /6000 k/6500 k (as per ansi bin) as required., recessed mounting, minimum lumen output 4320 lm, providing & fixing of bee star rated copper wounded with class of insulation f, double ball bearing capacitor start, aluminium body & aluminium blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 with down rod up to 30 cm with secondary support safety cable ( steel rope) , cotter pin, shackle kit with 3 x 1.5 sq.mm pvc insulated flexible copper conductor and making connection testing etc. as required., 1200 mm sweep bee 1 star rated (service value >=4.0 to 4.5 ), providing & fixing of ventilating fans capacitor start, copper wounded, single phase with pvc impeller, abs body, automatic openable louver shutter in existing opening including making connection, testing etc. as required., 200 mm sweep minimum air delivery 450 cum / hour, providing & fixing of 450 mm sweep oscillating type wall mounting / pedestal type fans with three speed, on and off position, sintered iron bush oil impregnated, with metal front and back 120 or more ribs guard; three no. aluminium blades, minimum air delivery 100 cum. / minute , minimum service value 1.11 cum./min/watt, noise level should be = 75 db, power consumption = 120 watts, motor protection through thermal overload protection device, including fixing with anchor bolts, making connection testing etc. as required., wall mounting type with adjustable vertical angle, supplying and laying fr pvc insulated & unsheathed flexible copper conductor of following nominal sizes with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from copper, stranding in acc. to is:8130/iec 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation pvc type a/c/d , flame retardant as per is 10810-53, better amperage rat

Central Government/Public Sector

CTN :45099968

03 Jun, 2026 NA

Jaduguda - Jharkhand

Tender For corrigendum : supply of balance ropes for cage, dia- 41 mm, wire finish- galvanized

Central Government/Public Sector

CTN :45167820

01 Jun, 2026 NA

Kavaratti - Kerala

Tender For corrigendum : supply of various sizes of poly propylene ropes at kochi

Central Government/Public Sector

CTN :45332755

05 Jun, 2026 1.99 Lacs

South Andaman - Andaman And Nicobar Islands

Tender For tender for supply of anti cockroach gel , clip jubilee 3 point 5 to 4 by 8 x 7 by 8 , clip jubilee 2 inch 2 point 750 , clip jubilee 2 inch , clip jubilee 0 point 65 colon 0 point 875 , bucket plastic 20 ltr capacity , bucket plastic 15 ltr capacity , brush scrubbing large , boric powder , bleaching powder stabilized , lint free baniyan cloth , dry chemical powder 05 kg pack , oil and grease remover , emery cloth abrasive 11x 9 grit 36 , cloth terry flex cotton 36 width , petroleum jelly , paint brush 3 inch , paint brush 1 inch , linseed oil boiled , gloves leather a , thinner , call boat swains , rope polypropylene 6 mm isi mark , rope polypropylene 4 mm isi mark , rope polypropylene 20 mm isi mark , white spirit , turpentine oil , tape roll seal teflon thread of 12 mtr length 0.1 mm x 1.25 cm , tape transparent water proof self adhesive cellulose film 38 mm wd , soap hard yellow , cleaner white toilet , cable electric 3 core 15 amps pvc insulated cable conductor copper gra , battery charging cable , chain ni silver for call boatswain , cloth sponge 18 cm x 20 cm , feather broom , broom country , super mop , tray paint roller , foam liquid afff 20 ltrs plastic container , glass cleaner 500 ml , rags cotton colored , cotton waste , duster cloths a , disinfectant fluid white or black phenoil , cleaning liquid for utensils , cleaning bar for utensils vim 500 gm pack , brush sweeping hand soft broom , super mop refils , polish metal brass , room freshener , dust bin with cover combined , ncml soluction oxalic acid , ncml soluction thiouric , napthalene balls , plastic mugs , detergent powder in 1 kg pack isi mark , soap liquid toilet , hand wash liquid , pest seal , refill for automatic air freshner 250 ml pack , rat sticking gel , paint roller 4 inch , paint roller 7 inch , distemper white isi mark , paint brush 4 inch , paint brush 2 inch , spray hand liquid insecticide , ncml solution teepol , ncml solution phosphoric acid , photocopier paper 215 x 342 mm , tape transparent 2 inch , wonder tape 2 , candle wax dia 19 mm , anti rust spray , tape transparent 1 inch , toilet paper , brown sheet laminated , tape insulation 25 mm steel grip isi mark , photocopier paper sizes 210 x 297 mm a4 80 gsm , alkaline battery aa 1.5 v lr 6 , fender coir turk head , varnish , bag gunny 27 x 21 , wet surface putty , m seal , battery dry 1.5v size small pencil r6 dura cell 1.5v

CTN :45328523

15 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For procurement of gland packing ropes

CTN :45333762

10 Jun, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of manila ropes (v5) isi marked to is 1084 (q2)

CTN :45329379

16 Jun, 2026 NA

Bandipora - Jammu And Kashmir

Tender For stage contract for supply of workshop/line material as and when required during financial year 2026-27 or till next contract gets finalised - electrical store/workshop items/: as per is standards and kpdcl approved vendors only wherever applicable, bush rods 12mm(lt) of standard make, bush rods 19mm(lt) of standard make, bush rods 25mm(lt) of standard make, bush rods 30mm(lt) of standard make, ht bush for dts of standard make(33/11kv as per requirement and relevant is), lt bush set for 250kva dt of standard make, lt bush set for 63kva dt of standard make, lt bush set for 100kva of standard make, aluminum thimbles 95sqmm of standard make, aluminum thimbles 120sqmm of standard make, aluminum thimbles 185sqmm of standard make, aluminum thimbles 240sqmm of standard make, aluminum thimbles 300sqmm of standard make, soldress clamp for 630kva, soldress clamp for 400kva of standard make, soldress clamp for 250kva of standard make, soldress clamp for 100kva & 63kva, gi channel/angle/flat/clamps of sizes (as per requirement), gi v cross-arm with top bracket including clamp(2 nos), 11 kv gapless surge arrestor,9 kv ,10 ka ,la with polymer housing, stn. type, 11kv go, ab switch 3-phase, 3-pole, 200 amp, vertical type, 11 kv horn gap fuse set 3 phase 200a, 11 kv heavy duty link set (polymer) line type with 6mm copper blade and 02 no. 8ft. gi channel, clamps and nuts and bolts, 11 kv pin insulators (polymer/porcelain) with pins(5kn), 11kv polymeric composite disc insulator 12kv,min failing load 45kn, lighting impulse 75kv positive and 80kv negative, creepage distance 320mm, lt shackle with mukhi clamps including gi nuts & bolts, gi nuts & bolts of sizes with full thread, manilla rope, gi wire 8 swg, suspension/tension clamp with eye hook as per kpdcl standards, insulating piercing connector (10-95sqmm), straight through cable jointing kit for 35/50sqmm ltab, straight through cable jointing kit for 75/95/120sqmm ltab, heat shrinkable outdoor cable termination kit, 50sqmm lt ab cable (3x50+1x16+1x35) sqmm xlpe (1.1kv, 3+1c, al), 35 mm ab (ht) cable (3x35+1x35 mm ) xlpe, dpc aluminium of sizes 13/14/16/18swg of standard make, super enamelled(se) of sizes 13/14/16/18/21swg of standard make, lathoride paper 10 mil of standard make, exchange of 1kg fresh al dpc by scrap dpc, exchanege of 1 kg fresh bush rods by scrap bush rods, lathoride paper 20 mil of standard make, ht paper 3 mil of standard make, hard card board 1/1.5/2/3mm of standard make, fiber tubes of standard make, cotton tape/ nawar of standard make, cork washers (32x12)5mm, cork washers (50x28)5mm, cork washers (110x74)5mm, cork washers (45x20)5mm, cork washers (60x32)5mm, cork washers (70x45)5mm, cork washers (90x50)5mm, cork sheets(24x36) 3 mm, cork sheets(24x36) 4mm, cork sheets(24x36) 5mm, cork strip(40x3) mm, cork strip(40x5) mm, oil seals for 250kva of standard make, oil seals for 100kva & 63kva of standard make, m seal, cotton tap 1" size (length 35 meter), nawar tap 1 size 35 meter long, tape roll pvc, old saree/doti cloth, insulating gum of standard make, aluminum strip of sizes (3/6, 3/7, 4/8, 4/10 mm etc ) of standard make, rubberized cork sheet 4mm thick, 2 feet *3 feet, rubberized cork sheet 3mm thick, 2 feet *3 feet, ht brown paper 3.0/2.5 mil, packing sheet (1mm)press card board 1/2/3mm, synthetic enamel paint grey colour, varnish dr.beck/empire, glass wool sleeves of sizes, fevicol, backlite tubes 1/2 inch,(1mtr length), packing gutties, electrical grade kraft paper,4mil, rubber washers ( m-12 ht oil seal),, rubber washers ( m-12 lt oil seal),, rubber washers ( m-16 lt oil seal),, rubber washers ( m-20 lt oil seal),, rubber washers ( m-25 lt oil seal),, rubber washers ( m-30 lt oil seal),, fiber glass sleeves 2mm, fiber glass sleeves 3mm, fiber glass sleeves 4mm, fiber glass sleeves 5mm, fiber glass sleeves 6mm, fiber glass sleeves 8mm, fiber glass sleeves 10mm, fiber glass sleeves 12mm, fiber glass sleeves 15mm, oxygen cylinder for welding with water c

CTN :45327260

10 Jun, 2026 4.36 Crore

Thiruvananthapuram - Kerala

Tender For dismantling, supply, installation, testing, and commissioning of 5 nos. passenger lifts and 5 nos. goods lifts in it buildings at technopark phase i campus, trivandrum - dismantling of existing lifts on buy-back basis and design, manufacturing, supply, installation, testing & commissioning (dmsitc) of machine room type passenger lifts for nila building, gearless ac vvvf type, suitable for operation on 3-phase, 415v, 50 hz ac supply, having rated capacity of 1360 kg, rated speed 2.0 m/s, serving g+7 floors with 8 stops/openings, complete with machine, controller, guide rails, ropes, counterweights, car enclosure, landing doors, operating/control/safety accessories, ard, dcs control, iot and bms integration, ip-based cctv provision, statutory approvals including lift license, dismantling of existing lifts, buy-back of dismantled materials and all associated works complete as per technical specifications, relevant is standards and tender conditions., dismantling of existing lift on buy-back basis and design, manufacturing, supply, installation, testing & commissioning (dmsitc) of machine room type passenger lift for chandragiri building, gearless ac vvvf type, suitable for operation on 3-phase, 415v, 50 hz ac supply, having rated capacity of 680 kg, rated speed 1.5 m/s, serving g+3 floors with 5 stops/openings, complete with machine, controller, guide rails, ropes, counterweights, car enclosure, landing doors, operating/control/safety accessories, ard, fireman operation, iot and bms integration, ip-based cctv provision, statutory approvals including lift license, dismantling of existing lift, buy-back of dismantled materials and all associated works complete as per technical specifications, relevant is standards and tender conditions., dismantling of existing lifts on buy-back basis and design, manufacturing, supply, installation, testing & commissioning (dmsitc) of machine room type goods / service lifts for gayatri building, gearless ac vvvf type, suitable for operation on 3-phase, 415v, 50 hz ac supply, having rated capacity of 1500 kg, rated speed 1.0 m/s, serving 4 stops/openings, complete with machine, controller, guide rails, ropes, counterweights, heavy-duty car enclosure, chequered plate flooring, operating/control/safety accessories, ard, fire recall, iot and bms integration, ip-based cctv provision, statutory approvals including lift license, dismantling of existing lifts, buy-back of dismantled materials and all associated works complete as per technical specifications, relevant is standards and tender conditions., dismantling of existing lifts on buy-back basis and design, manufacturing, supply, installation, testing & commissioning (dmsitc) of machine room type goods / service lifts for bhavani building, gearless ac vvvf type, suitable for operation on 3-phase, 415v, 50 hz ac supply, having rated capacity of 2500 kg, rated speed 1.0 m/s, serving 8 stops/openings, complete with machine, controller, guide rails, ropes, counterweights, heavy-duty car enclosure, chequered plate flooring, operating/control/safety accessories, ard, fire recall, iot and bms integration, ip-based cctv provision, statutory approvals including lift license, dismantling of existing lifts, buy-back of dismantled materials and all associated works complete as per technical specifications, relevant is standards and tender conditions., dismantling of existing lift on buy-back basis and design, manufacturing, supply, installation, testing & commissioning (dmsitc) of machine room type goods / service lift for chandragiri building, gearless ac vvvf type, suitable for operation on 3-phase, 415v, 50 hz ac supply, having rated capacity of 1000 kg, rated speed 1.0 m/s, serving 5 stops/openings, complete with machine, controller, guide rails, ropes, counterweights, heavy-duty car enclosure, chequered plate flooring, operating/control/safety accessories, ard, fire recall, iot and bms integration, ip-based cctv provision, statutory appro

CTN :45324481

04 Jun, 2026 4.70 Lacs

Bardhaman - West Bengal

Tender For replacement of six numbers of guide ropes of pit no. 01 and 02 winders of patmohana colliery under sodepur area.

CTN :45321993

01 Jun, 2026 NA

Panipat - Haryana

Tender For rc/purchase of workshop tool / general consumables material part-2 > - flat/triangular/half round/round/sqaure file both rough and fine all sizes, make- jk, flat/triangular/half round/round/sqaure file both rough and fine all sizes, make- miranda, needle file set, make- jk, hss bolt tap set mm/bsf/bsw all sizes make- totem, hss tool bit all sizes, make- miranda, hss tapered shank drill/hss central drill/ hss die nut/hss bolt tap all sizes, make addidon, knurling tool, h.s.s end mill cutter, size- 10mm, h.s.s end mill cutter, size- 12mm, carbide insert turning holder left and right side v shape, size- 10 inch, carbide insert tool holder ( insert size-1/4 inch), carbide insert tool, v-shape, v nmg 160404 size-1/2 inch, carbide insert boring tool, holder size- 10 inch, stone cracker tool for roller tip cracker, carbide insert tool holder (insert size-1/4 inch), carbide insert tool, v-shape, v nmg 160404, size-1/2 inch, roller grooving tool with angular carbide tip 350angle, size- 40mm x 40mm x 12 , make- sandwik/precision, roller grooving tool with angular carbide tip 400angle, size- 40mm x 40mm x 12 , make- sandwik/precision, roller meshchart grooving tool with 8mm x 50mm sq carbide tip, size: 40mm x 40mm x 12 , make:sandwik/precision, roller meshchart grooving tool with 6mm x 50mm sq carbide tip, size: 40mm x 40mm x 12 , make:sandwik/precision, en-8 rod, size-32mm, length-6 mtr (m.t.c required), en-8 rod, size-38mm, length-6 mtr (m.t.c required), en-8 rod, size-45mm, length-6 mtr (m.t.c required), en-8 rod, size-50mm, length-6 mtr (m.t.c required), en-8 rod, size-60mm, length-6 mtr (m.t.c required), en-8 rod, size-65mm, length-6 mtr (m.t.c required), en-8 rod, size-70mm, length-6 mtr (m.t.c required), en-8 rod, size-80mm, length-6 mtr (m.t.c required), en-8 rod, size-100mm, length-6 mtr (m.t.c required), en-8 rod, size-120mm, length-6 mtr (m.t.c required), en-8 rod, size-125mm, length-6 mtr (m.t.c required), en-8 rod, size-150mm, length-6 mtr (m.t.c required), m.s round, size-12mm (per kg), m.s round- size 18mm (per kg), m.s round- size- 25mm (per kg), brass rod, od: 2 inch-6 inch, length- 3 mtr, (mtc required), en-45 flat (per kg) size- 10mm x 60 mm, m.s square bar (per kg) size- 10 mm x 10 mm, en-45 spring steel flat (per kg) size: 50 x 6mm, en-45 spring steel flat (per kg) size: 50 x 8mm, en-45, spring steel flat (per kg) size: 65 x 8 mm, en-45, spring steel flat (per kg) size: 75 x 8 mm, carbon flat 8 mm x 50mm, carbon flat 6 mm x 50mm, fencing wire netting width- 6 feet length-50 feet thk 3mm hole size- 2 inch x 2 inch, rubber tapper plug, size-42x45mm, union joint, size:1/4 , union joint m-30 (req for 30mm od tube), ferrule-30mm (req for 30mm od tube), rubber rope 3mm, rubber rope 5mm, scotch brite pad, g.i rivit: size- 8 x 25mm, kassi (good quality), belcha (good quality), shovel (good quality), suza, sutli (per kg), copper sheet, size: 1000 x1000x 3mm (28kg), m.s nipple both end threaded size- 1/2 x 9 , m.s nipple both end thread, size-3/4 x 12 c-class, m.s nipple both end threaded size- 1 x 8 , m.s nipple both end threaded size- 10mm x 8 , m.s nipple both end threaded size- 20mm x 8 , m.s nipple both end threaded size- 15mm x 8 , m.s nipple both end threaded size- 40mm x 8 , m.s nipple both end threaded size- 2 x 8 , m.s nipple both end threaded size- 2.1/2 x 8 , m.s nipple both end threaded size- 3 x 8 , pvc pipe 6mm (transparent) (per mtr), d-cycle, cap: 1 ton, heavy duty, make-usha martin, d-cycle, cap: 2 ton, heavy duty, make-usha martin, d-cycle, cap: 3 ton, heavy duty, make-usha martin, d-cycle, cap: 5 ton, heavy duty, make-usha martin, d-cycle, cap: 10 ton, heavy duty, make-usha martin, d-cycle, cap: 25 ton, heavy duty, make-usha martin, steel wire rope sling steel core size- 1 x 5 mtr x 9 eye size, steel wire rope sling steel core size- 3/8 x 5 mtr x 9 eye size, steel wire rope sling steel core, size- 32mm (6 core) x 6.6 mtr length x 28 soft eye with pressed sleeve, steel wire rope sling steel core, size- 32mm

Ropes Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector