Latest rotameter Tenders | Government rotameter Tenders

State Government

CTN :45294833

17 Jun, 2026 NA

Puruliya - West Bengal

Tender For supply and installation of boosting pump and rotameter for gaseous chlorination system and miscellaneous works under sutaboi w/s scheme under pmd, phe dte. in the district of purulia.

Central Government And Public Sector

CTN :44971251

29 May, 2026 NA

Karimnagar - Telangana

Tender For corrigendum : supply of rotameter : : - tvf pg 19 m , ssvf pg 16 m , bpc tl 150 pg 4 , bpf csss 80 pg 3 , bpf cs ss 100 pg 3 , bpf cs ss 80 pg 3 , tvf pg 2 m , tvf pg 9 m , bpf cs ss 250 pg 3 , bpc tl 200 pg 4 , ssvf pg 6 m , bpf csss 300 pg 3 , tvf mge

Central Government/Public Sector

CTN :45033741

27 May, 2026 3.10 Lacs

Ranga Reddy-T - Telangana

Tender For corrigendum : providing of calibration services - calibration of rotameter , air (10-100cfm) quantity:25 numbers; as per scope of work; as per scope of work; as per scope of work,calibration services - calibration of rotameter , air (10-100cfm) quantity:25 numbers; as per scope of work; as per scope of work; as per scope of work,calibration services - calibration of rotameter , air (10-100cfm) quantity:25 numbers; as per scope of work; as per scope of work; as per scope of work,calibration services - calibration of rotameter , air (10-100cfm) quantity:25 numbers; as per scope of work; as per scope of work; as per scope of work,calibration services - calibration of rotameter , air (10-100cfm) quantity:25 numbers; as per scope of work; as per scope of work; as per scope of work,calibration services - calibration of rotameter , air (10-100cfm) quantity:25 numbers; as per scope of work; as per scope of work; as per scope of work,calibration services - calibration of rotameter , air (10-100cfm) quantity:25 numbers; as per scope of work; as

Central Government/Public Sector

CTN :45013547

28 May, 2026 NA

Golaghat - Assam

Tender For corrigendum : design, engineering, procurement, fabrication, inspection, testing, transportation, an supply of rotameter with and without transmitters as per mr

Central Government/Public Sector

CTN :45215706

23 May, 2026 NA

Aurangabad(Bh) - Bihar

Tender For corrigendum : procurement of spare rotameter for tg vacuum pump make nash model at3006 for ntpc nabinagar.

CTN :45211502

06 Jun, 2026 NA

Kalpakkam - Tamil Nadu

Tender For supply of liquid in glass tube rotameter as technical specification annexure attached

corporations/Associations/Others

CTN :44991561

08 Jun, 2026 NA

Hyderabad-T - Telangana

Tender For corrigendum : supply of rotameter for lot-1 , rotameter for lot-2 , rotameter for spares

Co-operative

CTN :45096131

20 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of instrument spare and annual maintenance contract - circular charts:- i) cc-200 (fc-261)range 0-100, ii) 9/d/179/fc-241, range 0-600, iii) 9/d/147/s-8963, range 0-150, iv) 9/d/112/s-3452, range 0-30, disposable pen (red), temperature gauge dial size 6" (h guru) heavy duty with test certificate (mercury filed) :- i) range 0-150 c streight steam 6", ii) range- 0-150 c capillary type (3 meter) bulb length 10" copper/pvc, iii)range 0-300 c streight steam 6", iv) range 0-500 c streight steam 6", vacuum gauge dial size 6" range- 0-30 inch of hg/760 mm bottom feed connection 3/8" bsp, h guru heavy duty with test certificate., pressure gauge dial size 6" bottom feed connection size 3/8" or 1/2" bsp, h guru heavy duty with test certificate :- i) range 0-15 psi 01 kg/cm , ii) range 0-30 psi 02 kg/cm , iii) range 0-60 psi 04 kg/cm , iv) range 0-150 psi 10 kg/cm , v) range 0-300 psi 21 kg/cm , vi) range 0-1030 psi 42 kg/cm /70 kg/cm , pressure gauge, dial size 10" bottom feed connection size 1/2" bsp heavy duty with test certificate:- i) range 0-60 kg/cm h. guru with test certificate, ii) range 0-2 kg/cm2 h. guru with test certificate, pressure gauge for turbines heavy duty with test certificate:- i) 4" dial size side back connection %" bsp range 0-2 kg/cm , ii) 4" dial size side back connection %" bsp range 0-4 kg/cm , iii) 4" dial size side back connection %" bsp range 0-7 kg/cm , iv) 4" dial size side back connection %" bsp range 0-10 kg/cm , teflon coated compensating cable 2 core j type, compensating cable fg/ss 2-core k type, 4 digit digital temperature indicator j & k typ , thermocouple sensor heavy duty:- i. 12" x 8 mm j/k type, ii. 8" x 8 mm j/ k type, iii. 6" x 6 mm j/k type, oil pocket ss 12", 6 digit digital event counter, proximity switch (magnetic sensor) pnp-nc sensing 8 mm,voltage 5-35 vdc, max load 300 ma, on/off pneumatic control valve flange type size- 1" to operate at air pressure 60-80 psi suitable for 20 kg/cm line pressure, on/off solenoid valve for pneumatic valve:- a) air filter " line size female thread, b) air filter with air regulator size 4", digital temperature controller (pid) j & k type, digital tachometer range 0-10000 rpm, 96 x 96 with magnetic sensor., steam flow indicator cum totalizer, drum level controller 4-20 ma input/output model no. 5296at (massibus make), dp transmitter 4-20 ma for boiler drum level, honybell make, positioner for drum level control valve, stroke counter for molasses tank, jumbo digital display with sensor, for juice and water tank, current and previous display size 4" x 4"., ma & mv source meter for temp. indicator calibration, pressure transmiter model tsc 01, range 0 to 40 bar, output 04-20 ma, accuracy 0.25% fs, pressure transmiter model ks-e-e-e b02u-m-v, range 0 to 2 bar, output 04-20 ma, supply 9-32 vdc, port g1/4e, syphon pipe s.s. 304 :- (i) u type, (ii) q type, pressure gauge, model en837-1, ss-316, dail size 6", bottom feed connection size 1/2" bsp, heavy duty with test certificate (tempsens make) :- i) range 0-6 kg/cm , ii) range 0-10 kg/cm , iii) range 0-21 kg/cm , iv) range 0-42 kg/cm , pid controller, size 96 96, model no. dc 1040, make honey bell, pressure recorder range, h-guru make, with test certificate (heany duty) with pipe stand mounted ", socket- ", size 10" :- (i) 0-1 kg./cm2, (ii) 0-2 kg./cm2, (iii) 0-10 kg./cm2, orifice with assembly (nipple), inlet pressure 21 kg/cm , outlet pressure 21 kg/cm , inlet temp. 350 c, outlet temp. 350 c, line size 4", drum level transmitter, range 400 to 400 in h2o, (make- honey bell), steam pressure transmitter, range 14.7 to 3000 psi, (make- honey bell), hade mounted thermocouple, length 450 mm, k-type duplex type, with test certificate (heany duty), signal isolator singal input 4-20ma, double output 4-20ma, repair & calibration work with amc super-heated wash water temp. controlling system- 01 no., d-super heated exhaust steam temp. controlling system- 01 no., temperature control system of transit

CTN :45178245

03 Jun, 2026 NA

Pune - Maharashtra

Tender For supply of sand media such as pebble and gravel and sand , activated carbon 900 iv , pressure gauge 0 to 7 kg , pressure gauge 0 to 20 kg , cartridge filter 4 inch x 10 inch , rotameter panel mount 500 lph , ro membrane 4 inch x 40 inch , conductivity sensor , cation resin , anion resin , float sensor , mix bed , ferrule 1 by 2 x 6 mm female thread , ferrule 1 by 2 x 6 mm male thread , pu tube 100 mtr , ferrule 12 mm x 6 mm male thread , upvc union 1inch , upvc union 1 by 2 inch , teflon tape , sintex tank 2 mtr x 1 mtr x 1 by 2 mtr tank capacity 1000 ltr , upvc pipe and fitting

CTN :45121917

01 Jun, 2026 NA

Doiwala - Uttarakhand

Tender For supply of guages and recorder and electronic instruments - h.guru make pressure gauge with s.s.mechanism complete, high accuracy, heavy duty:-, range 0-60 kg/cm dial size 10 fitting bsp( direct), range 0-200 psig, dial 10 fitting ( direct mount) bsp, range, 0-200 psig dial size 6 fitting bsp (direct mount), range 0- -10 kg/cm dial size 4 fitting bsp (direct mount), range, 0-20 psig dial size 6 fitting 3/8 bsp ( direct mount), p.g range 0-150 psi, dial 3 fitting 3/8 dsp direct, range, 0-4 kg. /cm dial size 2 , fitting bsp (panel mount)) centrie, range, 0-2 kg. /cm dial size 2 , fitting 1/8 bsp (panel mount)) centrie, range, 0-2 kg. /cm dial size 2 , fitting bsp (panel mount)) centrie, range, 0-2 kg. /cm dial size 1.1/2 , fitting 1/8 bsp (panel mount)) centrie, range, 0-210 kg. /cm dial size , fitting 2 bsp (panel mount)) centrie, h.guru make vacuum gauge with s.s.mechanism complete, high accuracy, heavy duty:-, range 0-760 mm hg, dial size 10 fitting bsp direct mount, range 0-760 mm hg, dial size 6 fitting 3/8 bsp (male) direct mount, h.guru make temperature gauge with s.s.mechanism complete, high accuracy, heavy duty:-, t.g range 0-150 c, dial size 6 , bulb dia 10 mmtotal immersion length 300 mm(with 2 mtr capillary extra)fitting bsp (m) direct mount, t.g range 0-100 c, dial size 6 , bulb dia 10 mmtotal immersion length 130 mmfitting bsp (m) direct mount, t.g range 0-150 c, dial size 6 , bulb dia 12 mmtotal immersion length 130 mmfitting bsp (m) direct mount, t.g range 0-150 c, dial size 6 , bulb dia 12 mmtotal immersion length 250 mmfitting bsp (m) horizental mount(back side centre), t.g range 0-200 c, dial size 6 , bulb dia 12 mmtotal immersion length 300 mmfitting bsp ( direct mount), t.g range 0-120 c, dial size 6 , bulb dia 12 mm length 300 mm, fitting bsp(m), t.g range 0-150 c, dial size 6 , length 300 mmbulb dia 12 mm, fitting bsp(m) (back side centre), beacon make instruments spares., megnatic pickup model mp-265, line amplefier cum signal conditioner model lasc-5input magnetic pick up, output 2 nos. 5vp to p square pulse, digital techometer indicator, model ldm-5004range 100-19990 rpm, electrical speed indicator model at-6, range- 0-6000 rpmbl 5000 rpm attg 104 rpm, electrical speed indicator model at-6, range- 0-2000 rpmbl 1500 rpm at tg 1500 rpm, electrical speed indicator model at-6, range- 0-8000 rpmbl 6000 rpm attg, tachogenerator, model - tg.fncbl 3vac attg 100 rpm, tachogenerator, model - tg.fncbl 1vac attg 100 rpm, cable same in use in megnatic pickupmp 265, 2.1/2 core copper sheilleded tefflon, multepoint digital tempature indicator model mdi-15, power supply 230 v 50 hz series po/004/05/89, range 0-600 cinput from thermocouple type j , raising power supply (rps) power supply 230v/50hzoutput 24v dc, complete cable type j (iron constant)(conductor standard size), r.t.d. pt-100 complete size 300 mm, thermo couple element type j standard size conductor, 1000 mm, 500 mm, 300 mm, 200 mm, syphon size , air prussure regulator (janatic/shano make)input pressure - 150 psi output pressure 30 psi, digital temprature indicator controllarrange 0-600 c type j (iron constant), digital temprature indicator input fe-k, cr ,alrange 0-600 c - 0-1200 c power supply 230v, 50hz, vacuum gauge tester ravika make (deed wight type), h.guru.south (s.s. machanisum) make, pressure gauge range 0 40 kg/cm , size 4 dial,connection bsp, panel mounting ( back connection), pressure gauge range 0 40 kg/cm , size 4 dial,connection 3/8 bsp, panel mounting ( back connection), pressure gauge - 0 7 kg/cm , size 4 dial,connection 3/8 bsp, panel mounting ( back connection), pressure gauge - range 0 4 kg/cm , size 4 dial,connection bsp, panel mounting ( back connection), pressure gauge - 0 2.5 kg/cm , size 4 dial,connection 3/8 bsp, panel mounting ( back connection), pressure gauge - 0 30 psi/lb/in , size 6 dial,connection 3/8 bsp, direct mounting, range 0 15 psi, size 4 dial, connection 3/8 bsp, direct mounting, steam flow meter with totelizer for boi

Rotameter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Co-operative