Latest rotary joint Tenders | Government rotary joint Tenders

corporations/Associations/Others

CTN :45510344

15 Jun, 2026 NA

Hyderabad - Telangana

Tender For supply of 2ch rf rotary joint

CTN :45459805

15 Jun, 2026 NA

Bhaderwah - Jammu And Kashmir

Tender For fixing of rates for supply of workshop material for the fy 2026 27 - super enamel aluminium wire (13 to 22 swg) with scrap , super enamel aluminium wire (13 to 22 swg) with out scrap, , dpc aluminium wire (13 to 22 swg) with scrap, , dpc aluminium wire (13 to 22 swg) with out scrap, , super enamel copper wire (13 to22 swg) with scrap, , super enamel copper wire (13 to22 swg) with out scrap, , dpc copper wire (13 to 22 swg) with scrap, , dpc copper wire (13 to 22 swg) with out scrap, , lt bush rods (m-12), , lt bush rods (m-20), , lt bush rods (m-30), , ht bush rods, , lv bushing (12 mm), , lv bushing (20mm), , lv bushing (32/30 mm), , ht bushing, , butter paper (2 to 3 mil), , lethroide paper (2 to 6 mm), , press boards (5 to 10 mm), , gutties, , rubber washers of sizes, , ltiht washers, , cork sheet (3,5 & 8 mm), , bakelite tubes, , cotton tape, , bovin tape, , insulating varnish, , m.seal, , fevicol, , glass sleeves, , packing sheet, , craft paper, , gum shoes, , aluminium strip of sizes, , pg clamps for 25 kva to 250 kva, , oil seals, , cork sheet, , old sarees, , nut & bolts 2" (16 & 18 no), , bush clamp ht, , cork washers of sizes, , pallet trolley 2.5 mt capacity, , oil testing machine (automatic motorised), , multimeter (waco make), , meggar 2500 mega ohm (waco make), , meggar 5000 mega ohm (waco make), , turn ratin meter (conforming isi standardel

CTN :45434380

25 Jun, 2026 NA

Goa - Goa

Tender For providing of custom bid for services - preservation of bed frame with rotary joint part no zhg2 099 091 sl no m32549 and m16065

CTN :45370377

20 Jun, 2026 NA

Multi City - Multi State

Tender For supply of dash board , lv1 wzt-3 625-70-0060z-1a setting of the headlight , lv1 wzt-3 625-09-151-z rotary joint , lv1 wzt-3 pn-74 e-90161 braid plc 10 16 l 100mm , lv1 wzt-3 pn-74 e-90161 braid plc 6 10 l 3000mm , lv1 wzt- 3 625-70-2036z ammeter in housing , lv1 wzt-3 625- 70-2019z starting relay box , lv1 wzt-3 625-70-084z box with bracket , lv1 wzt-3 625-70-054z fuel level sensor , lv1 wzt-3 625-70-018z batteries and appartus assembly , lv1 wzt-3 625-70-056z positioning of driver s dashboard , lv1 wzt-3 pn-74 e-90161 braid plc 24 30 l 270mm , lv1 wzt-3 pn-85 m- 82105 bolt m 12x35-8.8-a-fe zn8c , lv1 wzt-3 pn-85 m- 82105 bolt m 5x12-5.6-a fe zn8c , lv1 wzt-3 pn-85 m- 82105 bolt m 8x40-5.8-b fe zn8c , lv1 wzt-3 pn-74 e- 90161 braid plc30 40 l 60mm , lv1 wzt-3 pn-85 m-82101 bolt m 10x70-5.8-b fe zn8c , lv1 wzt-3 pn-74 e-90161 braid plc 6 10 l 120mm , lv1 wzt-3 pn-74 e-90161 braid plc 10 16 l 1800mm , lv1 wzt-3 pn-80 h-93830 wire m1 er 0.5 l 2000mm , lv1 wzt-3 pn-74 e-90161 braid plc 10 16 l 7300mm , lv1 wzt-3 170-52-004sb block of 6th right wheel , lv1 wzt-3 pn-85 m-82105 bolt m 16x35- 8.8-b fe zn8c , lv1 wzt-3 pn-85 m-82105 bolt 10x1.25x45-5.6- fe zn8c , lv1 wzt-3 pn-85 82105 bolt m 8x1x25-8.8-a fe zn8c , lv1 wzt-3 pn-85 82241 bolt m 8x1x50-8.8-b fe zn8c , lv1 wzt-3 ee2-390-036 measurement desk b 1 , lv1 wzt-3 d45-32-2002z-y coupling bar , lv1 wzt-3 1172-51-1016 z suspension arm 3,4,5 rh side w sleeve , lv1 wzt-3 1172-51-1015 z suspension arm1,2,6 lh side with sleeve , lv1 wzt-3 1172-51-1008 z-a suspn of 6th left r wheel on torsn bars , lv1 wzt-3 ee2-323-000 sensor b2 , lv1 wzt-3 625-09-153z pipe in the set , lv1 wzt-3 625-09-2004z elect bundele no 7 max , lv1 wzt-3 170-60-030sb pipe , lv1 wzt-3 625-09-2011z boom angle sensor , lv1 wzt-3 625-09-151z-a rotary joint , lv1 wzt-3 170.105.087-1 socket , lv1 wzt-3 625-09-5040 boom extensi,inclination angler sensor , lv1 wzt-3 625- 09-5041 rotary joint , lv1 wzt-3 170.105.081.1 gasket , lv1 wzt-3 170-104-070-sb pipe , lv1 wzt-3 625-107- 018z-2 fuse board , lv1 wzt-3 170-104-071-2 drum , lv1 wzt-3 625-107-018z-1 fuse board , lv1 wzt-3 170- 33-031 sb-1 bracet with fuel gauges , lv1 wzt-3 625- 107-003z-b board , lv1 wzt-3 625-107-001z-1 control desk , lv1 wzt-3 625-107-001z control desk , lv1 wzt-3 170-105-021sb-1 pipe , lv1 wzt-3 170-31-001 sb 170-31 tank , lv1 wzt-3 170-33 sb-2 fuel system pipe connection , lv1 wzt-3 170-105-026sb-2 lower cover , lv1 wzt-3 pn-85 m-82242 bolt m 8x1x20-8.8-b fe zn8c , lv1 wzt-3 170-102-006sb lever , lv1 wzt-3 170-106- 149sb right pin , lv1 wzt-3 170-104-128 bolt , lv1 wzt-3 170-104-123 bolt , lv1 wzt-3 170-104-122 bolt , lv1 wzt-3 170-106-131sb filtering element , lv1 wzt- 3 170-106-150sb left pin , lv1 wzt-3 170-106-108sb-1 gate stub pipe , lv1 wzt-3 170-106-108sb gate stub pipe , lv1 wzt-3 170-106-103sb hyd articulated joint , lv1 wzt-3 170-100-52sb rope feeder , lv1 wzt-3 170- 106-151 sb hydraulic cylinder , lv1 wzt-3 170-105- 252-1 filter gauge , lv1 wzt-3 170.105.047sb-1 toothed wheel , lv1 wzt-3 170-105-022sb-2a pipe , lv1 wzt-3 170-104-068-sb pipe , lv1 wzt-3 b71-26-51-z-1 welding resistor , lv1 wzt-3 170-105-026sb-3 lower cover , lv1 wzt-3 170-105-026sb-3a lower cover , lv1 wzt-3 b70-60-210 bolt , lv1 wzt-3 170-126-002sb beach fasten , lv1 wzt-3 170-106-229sb-1 non return //bid details 2 / 140 valve , lv1 wzt-3 170-63-001 sb-1a gear change slotted lever , lv1 wzt-3 170-106-501zb 170-10 hydraulic cylinder , lv1 wzt-3 170-33-054 sb shield , lv1 wzt-3 170-106-505 manometer switch uopf1 10 , lv1 wzt-3 170-107-022sb-1 bulldozer control desk , lv1 wzt-3 170-107-047sb plate in the set , lv1 wzt-3 170-64-9 sb-2 tie bar , lv1 wzt-3 170-64-6 sb-3 brake and clutch control system , lv1 wzt-3 170-63-002 sb traverse lever rh side , lv1 wzt-3 170-60-031sb pipe , lv1 wzt-3 170-107-052sb relay box , lv1 wzt-3 170-60- 032sb pipe , lv1 wzt-3 170-107-050sb-a switch with bracket , lv1 wzt-3 170-107-049sb switch with bracket , lv1 wzt-3 170-70-057sb-1a assembly of si

CTN :45355740

04 Jun, 2026 NA

Jamalpur - Bihar

Tender For auction sale of others - scrap and condemned machine & plants consisting of m&p no. [1] 10661 power press, 200t [2] 9451 elect. hoist [3] 10649 w.b. furnace [4] 10648 elet. pit furnace [5] 10650 oil quenching tank [6] 10657 power press, 100t [7] 10163 oil furnace [8 ]306072 blower. location:-sl. no.1 to 6 at bwf and sl.no.7 & 8 at bss inside jamalpur workshop. conditions:-[1] as is where is basis [2] sl no. 1 to 7 minimum dismantle in 02 parts and sl no. 8 in 01 parts [3] all electrical fittings & electrical motor are included for sale.[4] purchasers are adviced to see the lot before bidding and satisfy themselve in all respect. no complaint/claim by the purchaser will be entertained after e-auction sale. [5] custodian may allow purchaser to bring crane if it is required and justified.

Central Government/Public Sector

CTN :45355764

05 Jun, 2026 NA

Kalka - Haryana

Tender For auction sale of depot ferrous scrap - m. s. turning & boring scrap. qty = 000010.000 mt loc:-material is lying in front of kalka workshop gate no. 03 in bin no. 2 in kalka. remarks:- [1] loading by purchaser. [2] material will be disposed of as is where is basis . [3].jcb machine may be allowed for loading purpose only.

CTN :45309008

30 May, 2026 NA

Panipat - Haryana

Tender For mecgale make ash handling spares from oem - ## mecgale make dome type valve assembly complete with pn. accessories but excluding pn. control panel. model no. 3/12/4##, 300 nb assembly, 300 nb assembly (w/c top plate & dome), * 300 nb dome type valve*, dome shaped head, dome shaped head (water cooled), inflatable seal (neoprene), inflatable seal (silicon), top plate, top plate (water cooled), insert ring, spigot piece, o ring for spigot piece, shaft, shaft (water cooled), shaft seal, shaft seal spacer, shaft bush, external lip seal, dowel pin inner, dowel pin outer, shaft boss with torque arm, shaft boss with striker arm, shaft boss with torque arm (w/c), shaft boss with striker arm (w/c), set of gasket, set of pneumatic fittings for valve assly., rotary joint for w/c inlet valve, neoprene rubber seal, * pneumatic panel *, single solenoid valve (rotex, 230vac), coil for single solenoid valve (230vac), seal kit for single sol.valve, 1/2 single solenoid valve , (rotex, 230vac), coil for 1/2" single solenoid valve , (230vac), seal kit for 1/2" single sol.valve, seal pressure gauge, warree, vessel pressure gauge, warree, pressure switch(seal pressure) rt116, indfos, pressure switch (vessel low pressure) rt112, pressure switch (vessel high pressure), * others *, air limit switch 1/4 (nucon), seal kit for air limit switch, air lubricator for pn. panel (1/2" / shavo norgen), air filter for pn. panel (1/2" (shavo norgen), air filter for vessel pressure (1/4" (shavo norgen), blow valve 50nb, seal kit for blow valve 50nb, repair kit for blow valve 50nb, pneumatic cylinder 6 x 12 , seal kit for 6" x 12" pneumatic cylinder, front clavish for 6" x 12" pneumatic cylinder, front clavish for 4" x 8" pneumatic cylinder, flexible hose 3/4" x 1000mm, flexible hose 1/2" x 1000mm, conveying nrv 50 nb, seal kit for conveying nrv 50 nb, repair kit for conveying nrv 50 nb, conveying nrv 20nb, seal kit for conveying nrv 20nb, repair kit for conveying nrv 20nb, pneumatic nrv 1/2" (schrader), pneumatic nrv 1/4" (schrader), quick exhaust valve 3/4", diaphragm for quick exhaust valve 3/4", quick exhaust valve 1/4", diaphragm for quick exhaust valve 1/4", bleed nipple 1/4" x 1.5mm (for inlet valve ), bleed nipple 1/4" x 0.5mm (for vessel pressure), * spares for reverse pulse jet bag filter *, filter bags 144 x 2000mm (pnf), cages 2m long, ventury 144, pulse valve (size 1"),230v ac, diaphragm fo pulse valve1", coil for pulse valve 1", 230v ac, * ash conditioner *, spray nozzle 1/2", adjustable paddles, fixed paddles

Central Government/Public Sector

CTN :45302386

28 May, 2026 NA

Bhavnagar - Gujarat

Tender For auction sale of others - scrap cond. m and p items old used and u.s electrically operated synchronized hyd. jack with power pack, capacity 15t, manufactured by navyug industries, new delhi & commissining on dt 18/06/2007. qty 01 set (in 1 set, power pack is included), m&p nos. m/c&w/ 93 ( a to e), 01 set = 05 nos + power pack, location bg workshop bhavnagar. "as is where is " basis. mode of delivery in set. custodian sse scrap bvp, delivery will be given after full payment. if required removal,dismantaling and transportation from place of installation to workshop main gate and there after shall be in the scope of purchase, the purchaser firm has to arrange necessary equipment/tools and dismantle the machine from its foundation without damaging railway property. loading by purchaser, fdp 50 days.

Central Government/Public Sector

CTN :45302387

28 May, 2026 NA

Multi City - Gujarat

Tender For auction sale of others - abandoned old buildings/sheds/structures of mg workshop- 04 units, unit no. 19 - small shed near dome, unit no. 22 - record room, unit no. 23 - dwm office, unit no. 24 - machine and generator room location - mg workshop bvp. this lot of abandoned condemned buildings consisting of released door with chokhat wooden u/s - 3 nos, released window with chokhat wooden u/s - 41 nos, released wood - 1.296 cum, released ac sheet approx. - 433 sqm, released steel door u/s - 60 kg, released manglore tiles approx. - 620 sqm, released rails from structures u/s [41.25.50r & other miscellaneous type of rail off sizes] - 896 kg, ms scrap. i.e tie bar, flat, angle, fish plate, nut, bolt, ms sheet door, steel bar, gi sheet, xpm jalli etc. off size approx - 6726.7 kg, released masonary /rubble approx - 290.9 cum. custodian - sse (w) bvp, mode of delivery by lot, loading by purchaser. note: 1. dismantling is permitted up to ground level only. digging below ground level is not permitted. due care is to be taken by the bidder/purchaser to avoid unwanted mishapes at work spots. they should ensure to keep a safety banner around the work spot till it is completed since the locations are surrounded with working offices. 2. after removing/ clearing the rcc/ brick machonary rubbish from the spot only, the delivery of wood/ iron material will be affected. 3. contractor should take care of any cable while dismantling and digging. damage to railways shall be recovered as per extent rules. 4. part delivery/ part handing over is not allowed. 5. any ng/mg/bg pway rail lines or pway scrap with or without attachments lying under or beneath the building/sheds/structures or surrounding area are not deliverable. 6. any non-ferrous material of high value if found from the lot, it needs to be submitted by the purchaser to the custodian. 7. power of attorney along with aadhar card/identity proof/address proof must be submitted to this office for verification of authorised person by bidder before handing over (if any.) fdp 50 days.

Central Government/Public Sector

CTN :45197164

03 Jun, 2026 NA

Rourkela - Odisha

Tender For supply of hydraulic cylinder & rotary union for ca(2items) comprising of following: - rotary joint,pn:84122920,mat:484316 , - hyd.cyl,size700/500x645,hainzl industrie ,

Rotary Joint Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector