Latest rotary kiln scrap Tenders | Government rotary kiln scrap Tenders

CTN :40941334

14 Jul, 2025 NA

Aurangabad-Mh - Maharashtra

Tender For supply, expansion, erection and commissioning of 180 ml and 200 ml p.p. bottles with filling, capping, sleeving machinery situated at our gandheli dairy plant dist. chh sambhajinagar

State Government

CTN :40899567

07 Jul, 2025 5.00 Lacs

Banswara - Rajasthan

Tender For urgent work at kagdi pickup weir during flood season for the year 2025 - unskilled beldar/ coolie / chowkidar / water man / earth- dresser - unskilled beldar/ coolie / chowkidar / water man / earth- dresser, providing and filling/ replacing hydraulic oil of approved quality up to the required gauge level including cost of all materials, machinery, labour etc. complete., supplying of well stitched earth filled bags of capacity, weigh not less than 40 kg per bag at site etc. complete. plastic bag, empty bag of 50 kg capacity in good condition plastic / polythene, cost of diesel, painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work, hydraulic excavator/ loader like jcb/ poclain, hitachi etc. with all accessories (for actual site working, idle period) having bucket capacity above 0.40 & upto 0.75 cum without gst/ profit, p/laying isi marked p.v.c. insulated submersible cable confirming to(is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.90 % purity copper, stranding in acc. to is:8130/iec 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation pvc type a/c/d , flame retardant as per is 10810-53, better amperage rating as per is:3961 part 5, existing pipe / open trench / cable tray / on surface including making connection etc. as required. for additional technical parameters of product / work refer annexure a attached with this bsr - 6.0 sq.mm 3 core flat / round, p & f of direct on line (dol) / star - delta starter as per iec type-2 co-ordination chart of oem in existing panel with circuit breaker having inbuilt overload protection or separate thermal overload relay , short circuit, phase loss protection, suitable contactors, including wiring between switchgears, indicating lamps for r,y,b,on,off, push button for on, off, volt meter, ammeter, selector switch for local/remote, auto/manual/off operation. cast resin cts, provision for potential free contacts making connection, testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . direct on line (dol) starter with following motor rating - motor rating 4.0 kw

State Government

CTN :40853694

07 Jul, 2025 93.71 Lacs

Limbdi - Gujarat

Tender For third-party inspection/project management agency for the services of project management, construction, supervision and design review insite/offsite inspection & testing of materials, machinery, equipments, review of qap for providing irrigation water for filling of various ponds (38+6 villages) of muli, sayla &wadhwan taluka, district- surendranagar through pipeline by lifting water from botad branch canal escape near limbdi bhogavo-ii reservoir including supplying and laying m.s, d.i. and h.d.p.e. pipeline of different dia. with all allied works etc. (5th attempt)

CTN :40855452

17 Jul, 2025 NA

Belgaum - Karnataka

Tender For construction of basketball court - site preparation include cleaning, excavation leveling, soil base, watering etc, including cost of all materials and labour complete as per specifications , providing and laying boulder filling placing, ramming, watering etc. including cost of all materials and labour complete as specifications , providing and laying in position pcc concrete base of grade m20 and size 38 mtr x 28 mtr and 4 inch thickness. including cost of all materials and labour complete as per specifications , providing and applying in position allweather proof acrylic synthetic eight layers flooring system. filler course, cushion course, texture color coat, finish color coat, gale line marking , supply and installation pof moveable basketball pole as per standard made of heavy duty 6 inch round ms pipe with 2 point 2 meter extension with 20mm transparent acrylic board with dunking ring , providing and fixing basketball court lighting with 6 poles with 7000 watts , providing and fixing iron fencing around the basketball ground around 420 sq mtr , providing and fixing entry and exit door of basketball court , providing basketball , providing basketball net , providing and laying water drainage system , providing led score board weather proof of size length 3 feet and height 4 feet scoring control interface inbuilt counter switch , providing and laying in position in position cement pavers around the court area including cost of all materials labour hom of machinery work

Central Government / Public Sector

CTN :40685457

03 Jul, 2025 24.49 Lacs

Panipat - Haryana

Tender For corrigendum : custom bid for services - rpnc252027 support service for swing extruder vfd installation-shifting, foundation and installation of power transformer- 1. the power transformer is to be installed by construction of new transformer foundation, dismantling/modification of surface, providing chain link fencing on all other 4 sides, cleaning and refurbishment of bay area is in the scope of contractor only. all necessary manpower, tools & tackles, shifting machinery like hydra/crane etc shall be in the scope of contractor only. 2. shifting of power transformer of 7.2 mva onan from store to site, loading-unloading, erection, site storage are in scope of contractor. 3. the basic data sheet and ga drawing of the proposed transformer is attached in scope only. 4. the bidder if required must construct bay width, height and fire walls as per relevant is/iec/oisd standards and site conditions such that adequate clearances for maintenance shall be maintained. bidder to submit the plot plan of equipment layout of transformer layout along with the bid. the bidder shall carryout the site visit for assessment of the available installation space. the total length of the transformer bay should be such that the radiator can be accommodated on either side of transformer tank in the specified bay width. 5. all necessary earth pit provisions, & fire barriers/wall modifications, provision of new hvws water sprinklerbased firefighting system having suitable capacity for protection against the fire & explosion as per the design of supplied transformer and applicable standards & direction of eic. provision of all necessary fire protection system for transformers shall be in the scope of lstk contractor. 6. construction of oil drain facility of transformer as per is standard and hookup with existing burn oil pit. 7. the erection to be certified by contractor as per its recommended procedures which is to be submitted prior to erection. qap for erection and site commissioning shall also to be endorsed by contractor. 8. all kind of lifting, rigging work for loading-unloading, erection work including supply of hydra/ cranes, lifting rigging materials, manpower, tools and tackles as required are in scope of contractor. 9. all kind of skilled, semi-skilled, unskilled manpower as per itc of transformer requirement will be in the scope of contractor. 10. erection includes entire vacuum by proper capacity of vacuum pump, for not less than 48 hours, or more if required as per the instruction of engineer in charge. 11. first filling up of the transformer oil at site, its filtration, site testing oil sample, any refiltration required during final commissioning shall be in the scope of contractor including all tools, tackles and including oil filtration machines. oil may be supplied in drums, which should be properly sealed during transportation and storage. seal shall be verified and opened in front of iocl representative before filling in transformer. contractor should have enough storage capacity for handling oil. filling the oil from drums to the transformer through suitable capacity of high-quality filter machine and filtration of the same to get desired bdv &ppm as specified by engineer in charge and transformer manual. 12. contractor must replace all the gaskets by new ones if required by engineer in charge. 13. the contractor shall arrange nitrogen cylinder required at site for above work. 14. contractor must repaint the transformer tank with two coats of anti-rusting good finish ltbs grey shade 631 of is:5 by spray painting if required and as per the direction of engineer in charge..

CTN :40780580

04 Jul, 2025 5.92 Lacs

Vapi - Gujarat

Tender For work for interception & diversion of water from natural drain near maa kali mandir dungra colony to filling ghanchiyu talav. work including construction of storage pit, supply, installation, testing and commissioning of pumping machinery and providing, laying and lowering of pvc pipeline from suction pit to ghanchiyu talav for vapi, vapi municipal corporation. (2nd attempt)

CTN :40565905

02 Jul, 2025 311.97 Crore

Kadur - Karnataka

Tender For survey, investigations, design, supply, erection, testing and commissioning of 1) lift-3 from thangali tank to feed ayyanakere and belawadi tank series (total 38 nos) 2) auxiliary lift -4 from belavadi tank to feed 12 tanks and 3) auxiliary lift -5 from udharakatte kere to feed 27 tanks in kadur, chikamagalur and arasikere taluks under stage-iii of tarikere-kadur-chikmagaluru tank filling scheme including construction of jack well cum pump house, pumping machinery, pump house electrical works, electrical substation, power line and terminal bay, rising main, ms/hdpe pressure distribution network, necessary valves and surge protection works, necessary approach roads, supply of spares & tools including o&m for 5 years after successful commissioning of the entire system on turn-key basis

Rotary Kiln Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government / Public Sector