Latest rotary shaker Tenders | Government rotary shaker Tenders

corporations/Associations/Others

CTN :40974824

19 Jul, 2025 NA

Bokaro - Jharkhand

Tender For supply of inductive transducer with rtd head , mdbfp rpm indicator cum transmittermodel

State Government

CTN :40703342

07 Jul, 2025 NA

Aizawl - Mizoram

Tender For corrigendum : supply of laboratory equipment - fridge , hot air oven , digital water analyzer ph, conductivity, turbidity, temp., tds (for m. sc. practical) , rotary shaker , centrifuge , micro balance , lab balance , magnetic stirrer and heater , potentiometer , digital stop watch with alarm and batteries , ice flake machine , cylinder transporter , tool box , chemical rack , vernier calipers , scale (ruler) , multimeter (cat iii, true rms) with thermal sensor , surface tensiometer , vortex instrument , oil bath with heating block , step ladder ,

corporations/Associations/Others

CTN :40420978

18 Jul, 2025 3.27 Lacs

Kasimpur - Uttar Pradesh

Tender For corrigendum : procurement of lab instruments for chemical lab of ogcd, dtps, htps, kasimpur - sension5 portable conductivity meter specification range:#conductivity s/cm 0 to 19.99; 200 to 1999#conductivity ms/cm 2 to 19.99; 20 to 199.9#tds: 0 to 50,000 mg/l as nacl salinity: 0 to 42 g/l (ppt)#temperature: -10.0 to 105.0 c#resolution:#conductivity 0.01; 1.0#conductivity ms/cm 0.01; 0.1#tds: 0 .00-199.9 mg/l 0.1mg/l 2 00-1999 mg/l 1 mg/l 2 .00 -19.99 g/l 0.01 g/l 2 0-50 g/l 0.1g/l #salinity: 0.1 g/l (ppt)#temperature: 0.1 c#accuracy:#conductivity: 0.5% in the first 3 ranges, 1% at highest range #td of full scale #salinity: 0.1 ppt (-2 to 35 c) #temperature: 0.1 c# , make-hach, ph meter probe (ph meter sension ph3) cat no-lzw5010t.92.0002 make hachdetails in photograph enclosed in tender document, manual sieves shaker (with sieves set - mesh size-50,+100,+200) any standard make details in photograph enclosed in tender document, centrifugal machine for oil testing, any standard maketube capacity:no.12-24:size 15 mlshould have a digital timerbody should be made of strong fabricated & corrosion resistant steel.control panel- for start/stop switch, dynamic brakes, step less speed regulator with zero start switch & speed indicator with timer and protective fuses.door interlock.maintenance free brushless drive motor with exact speed preselection and display. speed range 100 to3000 rpm and above, accuracy 1 rpm. details in photograph enclosed in tender document, orset appratus (complete set), any standard make details in photograph enclosed in tender document, ph 2700 ph meter specification #ph range -2.000 to 20.000 ph #resolution 0.1 / 0.01 / 0.001 ph #accuracy 0.002 ph + 1 lsd #cal. points up to 6 preset or 5 custom #buffer sets usa, nist, din, user 1, user 2, custom #or range 2000.0 mv #rel. mv range 2000.0 mv on 0.1 mv# accuracy 0.2 mv #temperature,range (meter) 0.0 to 100.0 c / 32.0 to 212.0 f #resolution 0.1 c / 0.1 f #accuracy 0.3 c / 0.5 f #compensation atc / mtc #power requirements 9 v dc adapter, 1.3 a (100/240 vac, smps)# make- eutech

corporations/Associations/Others

CTN :40931047

25 Jul, 2025 NA

Ahmedabad - Gujarat

Tender For sell of non used ,obsolete spare parts of ashok leyland & tata c.n.g buses as per the apendix-1 & annexure-a ,b & c,as per terms & conditions of e-tender.no- 1 /2025 -26 -- , , front wind shield laminated glass, , rear wind screen toughen glass, , wiper motor 120w/24vdc, , tubular tandem wiipr linkage ass m10, , heavy duty wiper blade hd32, , spacing collar(tata), , insu.bush (ja), , bearing bush kit (ja), , brush assly kit (ja), , sealing assly kit (ja), , assly of fuse box and harness (ja), , press.transducer or gas lvl indlia, , gas level indica.3way solenoid24vw, , s/a of vertical dist.drive, , cogged v belt1325mm lngsvg.x0302350, , clips(ja), , distributor drive gear(ja)f-1661011, , electronic rpm meter (ja), , screw m10x30x1.5 cp plat (ja), , end speed governer 6e ltvs (ja), , buzzer low pressure (ja), , head lamp assly rhd rh 24v, , head lamp assly rhd lh 24v, , pilot lamp batt charge indicator (ja, , mtg plate for fog lamp switch (ja), , fuse link10a 152577 6.35dia2blungia, , washer 10 dia plat (ja), , temp sensor pricol (ja), , side x head lamp switch push pullia, , hazard warning switch pec type (ja), , inst. panel harness (ja), , fog lamp wiring (ja), , ignition wiring harness(ja)int conn, , speedo flex cable (ja), , switch for fog lamp front 24v (ja), , switch fog lamp rear 24v ret (ja), , l-tvs ignition coil (ja), , wiring harness (ja), , silencer dist.piece, , ring for oil seal, , distance piece, , bushing cam, , roller brk shoe, , brk.camshaft repair kit, , hilp brk.spring kit, , storage cyl valve f-8238200, , s/a of fan cooling, , ht cable, , bowl, , o ring water bypass area sp.vkg., , oil seal sp.vkg.5982800109, , plug for oil drain, , brake spring kit front, , cap assy,

Central Government And Public Sector

CTN :40134524

12 Jul, 2025 2.33 Lacs

Baramulla - Jammu And Kashmir

Tender For corrigendum : supply of microprocessor based rpm/speed indicator along with sensor

Central Government / Public Sector

CTN :40836286

18 Jul, 2025 NA

Rayagada - Odisha

Tender For supply of 2 hp/1.5kw single phase submersible pump set, overall efficiency-25.2, bee star rating-5 sta r, discharge capacity: 0.5 lps, discharge head: 100m, motor speed: 2900 rpm with control panel isi marke d mcb/main switch, ammeter, voltmeter, water level indicator with 100 mtr. flat cable 4 sq.mm 3 core (with each sm pump) make: jee or ksb or calama or worthington or cg or kirloskar [ warranty period: 30 mont hs after the date of delivery ]

corporations/Associations/Others

CTN :40901285

14 Jul, 2025 7.89 Crore

Jhansi - Uttar Pradesh

Tender For re- tender for supply, installation, testing and commissioning of lab equipments for organic lab i c maintenance of the lab at rlbcau, jhansi, u.p-, inductively coupled plasma mass spectrometry (icpms), lcms-ms, gas chromatography-mass spectrometry (gc-ms-ms), x-ray diffraction (xrd), microwave digestion unit, uv spectrophotometer, water purification system, laminar flow, double distillation assembly, microwave oven, micro centrifuge, refrigerator, deep freezer (-20 c), deep freezer (-80 c), ph meter (multi-parameter), hot plate, digital electronic balance, rotary shaker, spe vaccum manifold, nitrogen evaporator, rotary evaporator, muffle furnace, hot air oven, office equipments, computer with accessoires, multi function printer (black & white), multi function printer (colour), heavy duty copier machine, camera

CTN :40844558

16 Jul, 2025 NA

Firozpur - Punjab

Tender For supply of demand of store - stainless steel shelf rack (q3) , ptmt tap fitting (q3) , pvc grating 100 mm with hole dome type , pvc shelf size 450 x 124mm , pvc grating round 75mm without hole , led panel fitting 36w 2 feet x 2 feet ip 65 oblique 66 , lamp holder angular oblique batten bakelite , submersible tullu water pump 18w for desert cooler , mc4 y connector male and female for solar plant , ht insulation epr self amalgamating tape 38mm x 9 point 1 mtr , drop out ht fuse 20 amp , pvc copper cable 3 core 4 sqmm , cable pvc insulated flat aluminium conductor 3 core 10 sqmm , heating element 1500 watt for geyser , capacitor oblique condenser 50 mfd , capacitor oblique condenser 36 mfd , electric motor for water cooler 1365 rpm comma 150w 240v , mc 4 connector male and female for solar plant 1000v dc copper with silver platting , transformer oil dieelectric strength not less than 60kv , refrigeration gas chlorodifluora methane type cfm 22 r 22 size 1 kg cylinder , indicator bulb ac 220v neon type with wire for geyser red and green , pvc water tank triple layer cylindrical type of 1000 ltrs capacity , pvc water tank triple layer cylindrical type of 500 ltrs capacity , bracket for curtain rod , galvanised mild steel wire cloth comma 0 point 56mm nominal dia of wire and average width of aperture 1 point 18mm comma 15 mtr long x 4 feet width , cushion with cover for sofa set 100mm thick 40 density tapestry cloth 21 inch x 22 inch x 4 inch. rate of tapestry cloth shall not be less than 220 per mtr , plastic caned seat and back for chair tubular steel cba oblique cbb , prelaminated particle board exterior gde size 8 feet x 4 feet x 18mm , plywood 12mm thick bwp of size 7 feet x 3 feet , plywood bwp size 8 feet x 4 feet x 12mm , pvc cover for water storage tank 500 ltr , plywood bwp size 8 feet x 4 feet x 6mm , sliding bolt aluminum 250 mm with hasp and staple and fixing bolts and fized of length of bolt 250mm , sliding bolt aluminum 300 mm with hasp and staple and fixing bolts and fized of length of bolt 300mm , door handle aluminium 150mm , door handle aluminium 125mm , door handle aluminium 100mm , helical door spring closer ms 300 mm including roller and roller plate , floor door stopper of ai alloy body double leg and tongue anodised with hand down steel spring , half stall urinal size vitorous china , bitumen road patch pack of 25 kg , ss curtain rod cp 20 mm dia , french polish , touch wood , tarpentine oil , varnish gs , thinner , oil putty soft for window glass , polish melamine in one ltr container , fevicol sh , m seal 1 kg pack , cement white 1 kg pack , first class hard wood beading 4mm thick 0 point 75 inch w x 6 feet long , first class hard wood beading 4mm thick 1 inch w x 6 feet long , first class hard wood beading 4mm thick 1 point 5 inch w x 6 feet long , pvc bend 110mm , pvc socket 110mm , bend pvc 40 mm for l oblique l flushing cistern 10ltr , paint brush 3 inch , paint black rfu 1 ltr pack , paint olive green rfu 1 ltr pack , paint white rfu 1 ltr pack , paint smoke gray rfu 1 ltr pack , paint red rfu 1 ltr pack , nut and bolt with washer 75mm x 6mm

CTN :40830718

23 Jul, 2025 15.00 Lacs

Satna - Madhya Pradesh

Tender For providing of different electrical items in municipal corporation satna (m.p.) - providing of different electrical items in municipal corporation satna (m.p.), switch 6 amp, socket 6 amp, pandent switch 6 amp, switch 16 amp, socket 16 amp, copper wire 1.0 sqmm, copper wire 1.5 sqmm, copper wire 2.5 sqmm, 3 pin top 6 amp, 3 pin top 6 amp, step type electronic fan regulator 450 w, step type electronic fan regulator 650 w, step type electronic fan regulator 1000 w, step type electronic fan regulator single/double module 450 w, step type electronic fan regulator single/double module 650 w, step type electronic fan regulator single/double module 1000 w, celing fan - 1200 mm sweep, celing fan - 1400 mm sweep, wall fan - 300 mm sweep, wall fan - 400 mm sweep, exhaust fan - 300 mm sweep 900 rpm, exhaust fan - 380 mm sweep 900 rpm, exhaust fan - 450 mm sweep 900 rpm, pedestal fan ac 230-250 v 400 mm sweep, pedestal fan ac 230-250 v 450 mm sweep, pedestal fan ac 230-250 v 500 mm sweep, lt panel weight, led street light 40 w, bus bar 100 amp, led street light 120 w, indicator lamp red led type 250 volt ac, led street light driver 40 w, freqency meter, led street light driver 120 w, digital volt meter, led flood light 150 w, led flood light 250 w, led flood light 200 w, led flood light driver 150 w, led flood light driver 250 w, led flood light driver 450 w, digital amp meter, (modular) cassing caping ", cassing caping 1", pvc conduit pipe 20 mm, black screw " (1000 per pkt.), black screw 1" (500 per pkt.), black screw 1.5" (500 per pkt.), black screw 2.5" (100 per pkt.), ac box, mcb sp 10 amp, mcb sp 16 amp, mcb sp 20 amp, mcb sp 25 amp, mcb 2 pole 32 amp, mcb 2 pole 63 amp, mcb 4p 32 amp, mcb 4p 40 amp, mcb 4p 63 amp, mccb 100 amp, mccb 200 amp, mcb 3p 20 amp, mcb box 2 way, mcb box 4 way, mcb box 8 way, mcb box 16 way, pvc gitti (china nail), angle holder, hammer drill bit 6 mm, raul plug (guggi) (100 per pkt.), contactor 3p 85 amp, fan capacitor 2.5 mf, aluminium cable 4 core 16 sqr mm, pvc square box, halogen light 500 w, halogen rod 500 w, halogen rod 1000 w, mccb 250 amp, electronic choke 20 watt, aluminium cable 10 sqmm - 4c, steel nut bolt & washer, pvc insullation tape roll, drill bit 6 mm, aluminium lugs 35 sqmm, aluminium lugs 90 sqmm, tube led-20w, led bulb-9w, led bulb-12w, led bulb-15w, led bulb-18w, combined box complete 16amp, board modular-6way, board modular-12way, board modular-18way, isolator-200ampere, aluminium wire-6mm, 2 core, aluminium wire- 4mm, 2core, aluminium wire- 2.5mm-2core, aluminium wire-23 in two 76-2core, flexible cable 40x76, electrical board 16a

CTN :40387824

10 Jul, 2025 NA

Bangalore - Karnataka

Tender For corrigendum : supply of spare parts for prd 750 drilling unit - tower light amber as per specifications and part number in the annexure , breather as per specifications and part number in the annexure , air breather as per specifications and part number in the annexure , safe spiral for hose as per specifications and part number in the annexure , safe spiral for hose as per specifications and part number in the annexure , cylinder as per specifications and part number in the annexure , piston cup as per specifications and part number in the annexure , valve cover as per specifications and part number in the annexure , sansel rpm sensor without sensor as per specifications and part number in the annexure , sensor as per specifications and part number in the annexure , grease nipple m10 as per specifications and part number in the annexure , grease nipple m8 as per specifications and part number in the annexure , cam follwer bearing as per specifications and part number in the annexure , hose as per specifications and part number in the annexure , fuel display indicator as per specifications and part number in the annexure , fuel sensor as per specifications and part number in the annexure , digital temperature controller as per specifications and part number in the annexure , thermocouple as per specifications and part number in the annexure , hour meter as per specifications and part number in the annexure , magnetic pick up as per specifications and part number in the annexure , suction strainer as per specifications and part number in the annexure , filter element as per specifications and part number in the annexure , 6 mtr throttle lever assy as per specifications and part number in the annexure , bronze plate as per specifications and part number in the annexure , hyd piston pump_variable as per specifications and part number in the annexure , l nylon as per specifications and part number in the annexure , valve ball as per specifications and part number in the annexure , valve seat as per specifications and part number in the annexure

Rotary Shaker Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

corporations/Associations/Others

corporations/Associations/Others

Central Government And Public Sector

Central Government / Public Sector

corporations/Associations/Others