Latest rotating assembly Tenders | Government rotating assembly Tenders

Central Government/Public Sector

CTN :45318486

22 Jun, 2026 3.13 Crore

Dipka - Chhattisgarh

Tender For corrigendum : supply of pump shaft 40 c8 part no f59751 or equivalent f59751 or equivalent , key pump half coup. part no f59752 or equivalent , oil seal for bearing cover at d.e. part no f59753 or equivalent , hx hd cap screw part no f59754 or equivalent , bearing cover d.e. part no f59755 or equivalent , bearing housing d.e. part no f59757 or equivalent , stuffing box cover d.e. and n.d.e. part no f59759 or equivalent , water seal tube part no f597511 or equivalent , key for impeller 1st stage part no f597514 or equivalent , clinch fitiing part no f597513 or equivalent , impeller 1st stage f597515 or equivalent , wearing ring casing part no f597516 or equivalent , inter stage bush part no f597517 or equivalent , dowel pin int stage bush part no f597518 or equivalent , inter stage sleeve part no f597519 or equivalent , key for impeller 2nd stage part no f597520 or equivalent , impeller 2nd stage part no f597521 or equivalent , shaft sleeve part no f597522 or equivalent , stuffing box bush part no f597523 or equivalent , water seal ring part no f597525 or equivalent , o ring shaft to shaft sleeve part no f597526 or equivalent , split gland assy. part no f597527or equivalent , water thrower part no f597529 or equivalent , oil seal for bearing housing part no f597530 or equivalent , grease nipple bearing housing part no f597531 or equivalent , pipe plug for vib and temp at brg. hsg. part no f597532 or equivalent , bearing housing n.d.e. part no f597533 or equivalent , bearing cover n.d.e. part no f597535 or equivalent , lock nut for brg. part no f597536 or equivalent , lock washer for brg part no f597537 or equivalent , grease relief fitting for brg hsg part no f597538 or equivalent , shaft collar part no f597539 or equivalent , sleeve nut n.d.e. part no f597540 or equivalent , pipe nipple gland drain part no f597541 or equivalent , sleeve nut d.e. part no f597550 or equivalent , spr dowel sleeve part no f597553 or equivalent , pipe plug gauge and air vent part no f597555 or equivalent , eye bolt part no f597556 or equivalent , priming plug part no f597557 or equivalent , clinch fitting part no f597559 or equivalent , fourway adoptor part no f597560 or equivalent , stud bolt nut and washer stfng box cshng part no f597510 or equivalent , stud bolt with nut part no f597528 or equivalent , rotating assembly part no flrauf5975ds or equivalent //bid details 2 / 44

corporations/Associations/Others

CTN :45532876

27 Jun, 2026 NA

Kolkata - West Bengal

Tender For renovation and replacement of damaged and worn out spare parts with new ones for sludge pump-1 with ancillary works at wtp-iv, garden reach water works.- manufacturing, supply & delivery of pump - shaft made off ss-316 for 647 cum/hr., 15 mtrs head sludge , pump with necessary keys etc, as per sample at garden reach water treatment plant., , manufacturing, supply & delivery of shaft -sleeve, , made of ss-316 for 647 cum/hr., 15 mtrs head sludge, , pump as per sample at garden reach water, , manufacturing, supply &delivery of casing ring made of nici for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , manufacturing, supply &delivery of split gland made of nici for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant, , manufactering, supply delivery of baaring housing made of nici for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , manufactering, supply delivery of lock nut of impeller made of ss for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , manufactering, supply & delivery of lock nut of bearing made of ss for 647 cum/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant., , balancing of rotating assembly of 647 cum/hr., 15 mtrs head sludge pump including loading, unloading and transportation from and to at garden reach water treatment plant, , total rotating assembly & keep it at a suotable place after opening the top cover of pump unit. dismantling the bearing housing at both end & as per direction of eic., , manufacturing, supply & delivery of impeller made of nici for 647 m?/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant, , manufacturing.. supply delivery of bearing housing cover (d.e side) made of nici for 647 m?/hr., 15 mtrs head sludge pump as per sample at garden reach water treatment plant, , manufacturing, supply &delivery of bearing housing cover (n.d.e side) made of nici for 647 m?/hr., 15 mtrs head sludge pump as per sample at tp-1, grww. garden reach water treatment plant, , manufacturing, supply &delivery of supporting foot made of nici for 647 m?/hr., 15 mt head sludge pump as per sample at garden reach water treatment plant., , m.s plate as per is: 2062-2011/latest revision, make: sailitataijindal (b) above 2 mm upto 10 mm thickness, , fabricating m.s. specials of different diameter in shop out of 8 mm to 12 mm thick m.s plates supplied depart-mentally, cutting the plates to exact size & shape by gas cutting device and/or by adopting any other approved type of mechanical means, bending the same in true curvature by template and rolling machine of approved design including proper marking, levelling joints followed by electric arc welding - longitudinal and circumferential, as necessary, using standard electrodes as per i.s.specification including edge preparation, electricity charges and hydraulic testing of the fabricatedpiece all complete as per specification and direction of the engineer-in-charge. [the engineer-in-charge shall approve the electrodes for are welding before use. fabrication of m.s. flange to form m.s flanged tail piece shall not be considered as m.s. special], , cutting to requisite length or shape departmental r.s. joists, channels, angles, tees, plates etc. (payment to be made on area of cut surface), , welding in m.s. structural work with gas or electric: (a) tack weld, , welding in m.s. structural work with gas or electric: (b) continuous weld., , supply of m.s. flange (slipper type) as per is-6392 table 17 thickness 12mm nb diameter in mm 350, , flange joint to c.i./d.i/ms. pipes and specials including supply of rubber gasket, nuts, bolts, washers etc. of best quality to make the joint watertight at required hydraulic pressure all complete as per specification & direction of the engineer-in-charge. di

State Government

CTN :45474430

12 Jun, 2026 13.75 Lacs

Jaipur - Rajasthan

Tender For procurement of 1 set of rotating assembly for wilo (mather platt) make 14/12 cme type pump with duty condition of 1650 m3/hr discharge and 61 mtr head at mansarovar pumping station under clause 14.5 of agreement of o&m of bjwsp (transfer part).

Central Government/Public Sector

CTN :45354351

18 Jun, 2026 8.58 Lacs

Wani - Maharashtra

Tender For supply of rotating assembly, wilo make gst 100/125 model pump

CTN :45332612

16 Jun, 2026 33.06 Lacs

Bardhaman - West Bengal

Tender For supply of kbl mla impeller 100x125 , oil ring bearing with oil ring for kbl make mla 100x125 model pump , shaft sleeve ds mla 100x125 , shaft sleeve nds mla 100x125 , split bush lantern ring impeller for kbl make 100x125 model pump , split gland bush lt br for kbl make mla pump model 100x 125 , casing ring for kbl make pump mla 100x125 model , interstage bush for kbl make pump mla 100x125 model , balancing ring, bronze , balancing disc , pump shaft for 3 stage for kirlosker make mla 100x125 pump , pump shaft for 4 stage for kirlosker make mla 100x125 pump , pump shaft for 5 stage for kirlosker make mla 100x125 pump , pump shaft for 6 stage for kirlosker make mla 100x125 pump , rotatingassembly 3 stage kbl make mla 100 x 125 pumps , rotating element 4 stage 100 x 125 kbl mla 4 , rotating element 5 stage 100 x 125 kbl mla 5 , rotating assembly 6 stage kbl make mla 100 x 125 pumps , rotating element 6 stage for mnp make pl ii model pump , rotating element 5 stage formnp make pl ii model pump , rotating element 4 stage for mnp make pl ii model pump , rotating element 3 stage for mnp make pl ii model pump , rotating element 6 stage for mnp make pl i model pump , rotating element 4 stage for mnp make pl i model pump

Central Government/Public Sector

CTN :45332764

05 Jun, 2026 NA

Chandrapur - Maharashtra

Tender For supply of rotating assembly 13moc part no sct20058213mocsubrua2 , casing wear ring moc cf8m part no 190cf8m , neck ring ss part no sct20058219201232 , interstage ring part no sct200582cf8m204 , gland ss part no sct20058222300232 , interstage bush ss part no sct20058231300232 , spacer bush ss part no sct20058220100232 , split lantern bush ss part no sct20058222700112 , water defelctor steel part no sct20058223600251 , vent valve ss part no sct2005824500011 , bearing housing unit part no sct200582sssubbhusct582 , flexible piping for sealing aisi 316 part no sct200582aisi316560

CTN :45346308

17 Jun, 2026 12.76 Lacs

Bardhaman - West Bengal

Tender For supply of impeller, lg-2 for pl-i stage pump , neck ring with screw, lb-2 for pl-i stage pump , neck bush with screw, lb-2 for pl-i stage pump , balance valve, pb-1 for pl-i stage pump , setting and bush with screw, lb-2 for pl-i stage pump , pair of sleeve, lg-2 for pl-i stage pump , set of two gland, brass for pl-i stage pump , set of two bearing bushes, lb-2 for pl-i stage pump , shaft with keys and sleeve nut for 4 stage for pl-i stage pump , impeller, lg-2 for pl-ii stage pump , neck ring with screw, lb-2 for pl-ii stage pump , neck bush with screw, lb-2 for pl-ii stage pump , balance valve, pb-1 for pl-ii stage pump , setting and bush with screw, lb-2 for pl-ii stage pump , pair of sleeve, lg-2 for pl-ii stage pump , set of two gland, brass for pl-ii stage pump , set of two bearing bushes, lb-2 for pl-ii stage pump , shaft with keys and sleeve nut for 3 stage for pl-ii stage pump , shaft with keys and sleeve nut for 4 stage for pl-ii stage pump , shaft with keys and sleeve nut for 5 stage for pl-ii stage pump , rotating assembly 5 stage for mla 100 x125 , rotating assembly 6 stage for mla 100x125 , shaft sleeve ds for mla 100x125 steel , pump shaft for 3 stage mla 100x125 , pump shaft 4 stage mla 100x125

Central Government/Public Sector

CTN :45320615

01 Jun, 2026 NA

Multi City - Multi State

Tender For various mechanical maintenance jobs during capital repair of sinter machine no.1 of sinter plant-2.

Central Government/Public Sector

CTN :45320620

30 May, 2026 NA

Multi City - Multi State

Tender For capital repair of sinter cooler , dip bunker, sinter screen & its various chutes of machine-2,sp-3.

Central Government/Public Sector

CTN :45320621

30 May, 2026 NA

Multi City - Multi State

Tender For capital repair of pump house , its pipelines , gas pipeline circuit, chutes of bwf - 1061 & installation of whrs in noduliser of sinter machine-2 ,sp-3.

Rotating Assembly Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors