Latest rotating equipment Tenders | Government rotating equipment Tenders

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

Central Government And Public Sector

CTN :45703055

13 Jul, 2026 NA

West Champaran - Bihar

Tender For services for ultrasonic flow detection of shafts and dynamic balancing of rotating equipment at hbl plant sugauli, east champaran and lauriya, west champaran, bihar

State Government

CTN :45676642

07 Jul, 2026 NA

Manaparai - Tamil Nadu

Tender For condition monitoring of rotating equipments in pulp and soda recovery plant at tnpl unit - ii trichy

CTN :45505858

25 Jun, 2026 NA

Koderma - Jharkhand

Tender For supply of pcb fabrication lab , pcb prototyping machine , safety devices on haulage road , shot hole pattern in a sinking shaft , plumbing or shaft centring arrangements for a sinking shaft , shot hole patterns , types of roof support by timber , chock with four corner props , chock release device , tapered props , side and roof support in a roadway , roof bolting , magnetic unlocker for flame safety lamp hand held type permanent magnet , tool kit for servicing and maintenance of flame safety lamp , flame proof lamp fitting for dark room of gas testing , drill rod and drill bit , air leg , lubricator , exploder dgms approved twenty five shot capacity max resistance one hunderd fifty nine ohms, one and half a firing current, non volt battery, dc output five hunderd volt , scraper cum brake detector , stemming rod , metric chain size twenty meter , metric chain size thirty meter , engineering chain , revenue chain , gunter chain , steel tape fifteen meter , steel tape thirty meter , metallic tape,

State Government

CTN :45417586

09 Jun, 2026 NA

Manaparai - Tamil Nadu

Tender For corrigendum : condition monitoring for rotating equipments in board machine at tnpl unit - ii trichy

State Government

CTN :45417588

10 Jun, 2026 NA

Manaparai - Tamil Nadu

Tender For corrigendum : condition monitoring of rotating equipments in tissue machine at tnpl unit - ii, trichy.

Central Government And Public Sector

CTN :45448818

26 Jun, 2026 NA

Kaiga - Karnataka

Tender For providing of custom bid for services - comprehensive two years running contract for on-site condition monitoring of rotating equipment at kgs 3and4

Central Government/Public Sector

CTN :45123739

02 Jun, 2026 NA

Korba - Chhattisgarh

Tender For corrigendum : name of job: package - a : erection, testing, commissioning, trial operation & handing over of boiler and its auxiliaries including pressure part, non-pressure parts, duct dampers and its support structure, rotating equipment’s, air pre-heaters, id/fd/pa fans, mills, refractory, fdps piping and system in boiler & bunker area from nearest fire water line header, handling of materials at bhel / clients stores / storage yard and transportation to site, preparation of foundation, fixing of hangers & supports, application of lining, insulation, supply & painting, stenciling & labelling and common system of unit#1 at 2x660 mw cspgcl korba west tps, district korba, chhattisgarh.

corporations/Associations/Others

CTN :45282680

11 Jun, 2026 NA

Cuddalore - Tamil Nadu

Tender For providing of operation and maintenance of other machines and plants - biennial maintenance works of boiler pressure parts and auxiliaries including all rotating equipment in nntps

State Government

CTN :45111591

14 May, 2026 NA

Manaparai - Tamil Nadu

Tender For condition monitoring of rotating equipments in tissue machine at tnpl unit - ii, trichy.

Rotating Equipment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors