Latest rotation motor Tenders | Government rotation motor Tenders

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

CTN :45250549

11 Jun, 2026 NA

Angul - Odisha

Tender For supply of 3 phase, 415v, squirrel cage induction motor and its spares as per uploaded annexure

State Government

CTN :44362185

30 Apr, 2026 17.46 Lacs

Bengaluru - Karnataka

Tender For corrigendum : supply of accessories/ consumables/ spares for air conditioners/ laundry equipment/ boiler equipment/ medical gas/ furnitures etc. - wheels for ventitator trolleys as per sjicr sample, hepa filters box type with flange 395 x 395 x 50 mm(forspecifications refer tech bid), hepa filters box type with flange 400 x400 x110 mm box flange type (forspecifications refer tech bid), hepa filters box type with flange 490 x 490 x 300 mm (forspecifications refer tech bid), hepa filters box type with flange 650 x 242 x 100 mm (for specifications refer tech bid), hepa filters box type with flange 650 x605 x100 mm-(refer tecbid forspecifications), nozzle for burner unit, mobrey level control magnetic rod (1.5ton capacity boiler) -1 set, max green 3399ph correction chemical- 1kg, main pressure gauge 3/4 inches siphon, leather hand glouse -1 pair, spirax float steam trap size 1 inches, softener plant with pump 200 ltrs, softener plant strainer, softener plant resin -1 bag (50 kg), softener plant resin -1 ltr, softener plant chemical-ab 270 -1 kg, salt for softener plant regeneration -50 kg, s.s vertical nrv for feed water pump, r o plant chemical wextret genesol 9002, r o plant chemical- lf-60 -1 kg, r o plant chemical genesol 703 1 kg, r o plant chemical genesol 38 1 kg, r o plant cartridge filter, pump mechanical seal size 35 mm, ph value finding meter, peso licence renewal of 15 kl 1 hsd tank class b (mysore) ( per year )., peso licence renewal of 15 kl 1 hsd tank class b & c (banglore)( per year )., peso licence renewal of 15 kg 1 hsd tank class b (kalburgi per year), panel board programmable feathertouch display -1 set, painting brush -2 nos, ss presure gauge with glycerin 21 kg/cm2, ss female adapter (63 mm size), ss 63mmx19mm short branch pipe (nozzle )newage make, single delivery ss hydrant valve (80 mm flange & 63 mm coupling) -newage make, rubber lined rrl fire hose with couplings 15 mtr length 63mm dia, pvc blank cap with chain(63 mm size), lip washer (63mm size), hose box key, fire hose box made with 18 gauge ms sheet with shutters , glass , key ,breathing & powder coating with stand, fbi gm couplings (fire brigade inlet )1, coupling washer (63mm size), butterfly valve 80 mm pn 16 - audco make, eighty mm pn16 butterfly valve with gi pipe,flange,nut bolt & washer audco make, eighty mm plate type nrv with gi pipe,flange,nut bolt & washer intervalve or crystal make, fifty mm pn 16 butterfly valve with gi pipe,flange,nut bolt & washer audco make, two hundred mm cl flange end foot valve with nut washer normax make, one hundred and fifty mm pn16 butterfly valve with gi pipe,flange,nut bolt & washer audco make, one hundred and fifty mm plate type nrv with gi pipe,flange,nut bolt & washer intervalve or crystal make, one hundred mm pn16 butterfly valve with gi pipe,flange,nut bolt & washer audco make, one hundred mm cl flange end foot valve normal make, supply & installation, testing and commissioning of addressable two zone fire alarm control panel, supply & installation, testing and commissioning of addressable sounder with accessories, supply & installation, testing and commissioning of addressable break glass manual call point, supply & installation, testing and commissioning of addressable smoke sensor base for mounting, supply & installation, testing and commissioning of addressable isolators loop isolation module, volt meter 440volt for pump house spair parts and frabrications- 3 phase pannal boare and starter for 10hp , 20hp , 30hp , 50 hp, skf bearing - 6313 for 50 hp 1440 rpm induction motor, skf bearing - 6312 for 30 / 40 hp 1440 rpm induction motor, skf bearing - 6310 for 20 hp 1440 rpm induction motor, skf bearing - 6210 for 50 hp 1440 rpm induction motor, wall mounted fan 400 mm sweep., supplying & installation testing and wiring for 2.5sqmm fire alarm cable & using pvc conduit pipe 19mm dia 2mm thick with suitable size bends, junction box adhesive pas

Central Government/Public Sector

CTN :45008846

18 May, 2026 NA

Sivasagar - Assam

Tender For procurement of lhp make spares for 100hp 3-phase induction motor for drilling rigs of assam asset.

CTN :44993745

04 May, 2026 NA

Ranchi - Jharkhand

Tender For supply of (i) hscf pump model 6wln16b of capacity 50000 gph/227 m3/hr, head-50 meters, suction/delivery-200/150 mm, casing of pump-2% nici, impeller- cf8m, shaft-ss316, sleeve-ss316 and gland packing. make-wpil or similar, along with (ii) squirrel cage induction motor rating 75 hp, 4 pole. 3-phase, tefc, ie3, ip65, make- marathon/abb/bbl or similar. (iii) fully automatic star delta motor starter panel 75 hp, 415 volt. make- l&k (formerly l & t)/abb or similar. panel-electrocon make. (iv) mandatory spares: impeller(cf8m)-01 no, split gland bush (bronze)-01 set, split gland-01 set, tyre coupling-01 no, neck ring (bronze)-01 set, bearing (de & nde) of pump-01 set, gland packing-01 set motor bearing (de & nde)-01 set, (v) foot valve-01 no, sluice valve ( suc & del)-02 nos, nrv-01 no, pressure guage-01 no, vacuum guage-01 no, tool set. as per cee / grcs spec no. cee/s/185/hscf pump/9/98/revised july 2022. [ warranty period: 30 months after the date of delivery ]

CTN :44452117

06 Apr, 2026 NA

Mumbai - Maharashtra

Tender For supply of crystal rotation motor spare of cz puller integrated with adc software

Rotation Motor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector