Latest rotor bar Tenders | Government rotor bar Tenders

State Government

CTN :45286409

06 Jun, 2026 NA

Mandala - Madhya Pradesh

Tender For construction material like cement tiles iron bar paver block etc - opc 53 mpa cement (50 kg bag) — reputed brand, bis certified; ppc cement (50 kg bag) — reputed brand, bis certified; tmt steel rebars — isi certified (from a reputed company), available in various diameters: 8, 10, 12, 14, 16 mm; vitrified double-charged floor tiles — 600 x 600 x 9-10 mm; vitrified double-charged floor tiles — 1200 x 600 x 10-12 mm; vitrified double-charged floor tiles — 300 x 300 x 8-10 mm; vitrified double-charged wall tiles — 300 x 450 x 8-10 mm; concrete interlocking paver blocks — treated with permanent floor paint.

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

State Government

CTN :45290539

08 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For hand pump spares parts isi mark and conforming to is 15500 2021 (part 1 to 8) (with up to date amendment) - prevailing torque type steel hexagonal nutm10x1.5 is:7002, ball bearing 20 bc02pp is:6455, bolts for cover m 12x20 is:1363, washer for axle to suit m-12 is:2062, high tensile bolt m-10x40mm is:1364 part-i, hexagonal bolt m12x1.75x40 is:1363 part-i, hexagonal nut m12x1.75 is:1364 part-3, hexagonal coupler m12x1.75x50 is:15500 part-4, long bolt m12x1.75x20 for extra deep well is:1363 part-i, reducer cap painted for mark ii & extra deep well hand pump i.s.i. mark - 0.880 kgs approx., cylinder body with brass liner for deep well pump isi mark. - 2.50kgs approx., cylinder body with brass liner for extra deep well and vlom pump isi mark. - 3.20 kgs approx., plunger yoke body for all types of pumps i.s.i. mark. -0.260 kgs approx., spacer for nitrile rubber pump bucket for all types of pumps i.s.i. mark.-0.210kgsapprox., follower for mark-ii deep well i.s.i.mark.- 0.280kgs approx., follower for extra deep pump i.s.i.mark.- 0.370kgs approx., check valve seat for mark ii & extra deep well i.s.i. mark.- 0.210 kgs approx., check valve for mark ii & extra deep well i.s.i. mark, rubber seat retainer for mark ii & extra deep well 0.080 kgs approx., lowerspacerforextradeepi.s.i.mark.-0.200kgs approx., chain with coupling for all types of pumps i.s.i. mark.-0.550kgsapprox., front cover hot dip galvanized for all types of pumps i.s.i. mark.-1.230 kgs approx., bearing spacer for axle for all types of pumps i.s.i. mark, third plate galvanized for all types of pump i.s.i. mark. -1.400kgs approx., connecting rod for all types of pumps i.s.i.mark.-2.7kgsapprox., washer electro - galvanized i.s.i. mark, stand galvanized normal isi mark ii & vlom i.s.i. mark.-17.900 kgs approx., stand galvanized telescopic for marks & vlom i.s.i. mark.-19.750 kgs approx., stand galvanized normal for extra deep well i.s.i. mark.-18.700 kgs approx., stand galvanized telescopic for extra deep well i.s.i.mark.-20.500kgsapprox., handle comprising handle bar, bearing housing & chain guide for mark ii & vlom i.s.i. mark, handle comprising handle bar, bearing housing & chain guide for extra deep i.s.i. mark, t bar for extra deep well i.s.i. mark, counter weight for extra deep i.s.i. mark. -12.00 kgs approx., water tank complete for mark ii deep well & extra deep well hand pump i.s.i. mark. - 7.80 kgs approx., head complete for mark ii & vlom i.s.i. mark.-10.220 kgs approx., head complete for extra deep well i.s.i. mark.-10.150 kgs approx., s.s. handle axle for all types of pumps i.s.i. mark.-0.350 kgs approx., s.splungerrodformarkiii.s.i.mark.-0.430kgs approx., s.s. plunger rod for vlom & extra deep well i.s.i. mark.- 0.470 kgs approx., rubber seating for upper valve for all types of pumps i.s.i. mark, pump bucket of nitrile rubber for all types of pumps i.s.i. mark, rubber seating for lower valve for mark ii & extra deep i.s.i. mark, sealing ring for mark-ii & extra deep well i.s.i. mark, head assembly complete with handle assembly, for mark ii & vlom isi mark., head assembly complete with handle assembly for extra deep isi mark, handle assembly complete for mark ii deep well & vlom pumps isi mark.-10.250 kgs approx., handle assembly complete for extra deep well hand pump isi mark. -15.350kgsapprox., cylinder assembly complete for mark ii deep well hand pumps isi mark.-6.10kgs approx., cylinder assembly complete for extra deep hand pump isi mark.-7.00kgsapprox., plunger valve assembly suitable for nitrile bucket comprising of plunger yoke body, upper valve, spacer follower pump bucket & upper value seating for mark ii deep well hand pump consisting of isi mark spares., plunger valve assembly suitable for nitrile bucket comprising of plunger yoke body, upper valve both spacers, follower pump bucket & upper value seating for extra deep well hand pump consisting of isi mark spares., check valve assemb

Central Government/Public Sector

CTN :45302387

28 May, 2026 NA

Multi City - Gujarat

Tender For auction sale of others - abandoned old buildings/sheds/structures of mg workshop- 04 units, unit no. 19 - small shed near dome, unit no. 22 - record room, unit no. 23 - dwm office, unit no. 24 - machine and generator room location - mg workshop bvp. this lot of abandoned condemned buildings consisting of released door with chokhat wooden u/s - 3 nos, released window with chokhat wooden u/s - 41 nos, released wood - 1.296 cum, released ac sheet approx. - 433 sqm, released steel door u/s - 60 kg, released manglore tiles approx. - 620 sqm, released rails from structures u/s [41.25.50r & other miscellaneous type of rail off sizes] - 896 kg, ms scrap. i.e tie bar, flat, angle, fish plate, nut, bolt, ms sheet door, steel bar, gi sheet, xpm jalli etc. off size approx - 6726.7 kg, released masonary /rubble approx - 290.9 cum. custodian - sse (w) bvp, mode of delivery by lot, loading by purchaser. note: 1. dismantling is permitted up to ground level only. digging below ground level is not permitted. due care is to be taken by the bidder/purchaser to avoid unwanted mishapes at work spots. they should ensure to keep a safety banner around the work spot till it is completed since the locations are surrounded with working offices. 2. after removing/ clearing the rcc/ brick machonary rubbish from the spot only, the delivery of wood/ iron material will be affected. 3. contractor should take care of any cable while dismantling and digging. damage to railways shall be recovered as per extent rules. 4. part delivery/ part handing over is not allowed. 5. any ng/mg/bg pway rail lines or pway scrap with or without attachments lying under or beneath the building/sheds/structures or surrounding area are not deliverable. 6. any non-ferrous material of high value if found from the lot, it needs to be submitted by the purchaser to the custodian. 7. power of attorney along with aadhar card/identity proof/address proof must be submitted to this office for verification of authorised person by bidder before handing over (if any.) fdp 50 days.

Central Government/Public Sector

CTN :45289245

02 Jun, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1. nr-094966 accnh/rcf 2. wc-081342 accnh/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 32 mt approx.) s.b. lot no. bpl/crws/26-27/cond. coach/10/0037. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

Central Government/Public Sector

CTN :45289246

02 Jun, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1-nr-081086/ accnh /rcf 2-wc -081488 accnh/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 32 mt approx.) s.b. lot no. bpl/ crws/26-27/cond. coach/10/0038. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

State Government

CTN :45290543

12 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For rate contract for stationery and office supply items - stationary items, photocopy paper a4 size (xerox), photocopy paper a3 size (xerox), file pad, top secret file pad, l- shape folder (transparent), twin pocket pp presentation folder, box file, ring binder file (student/small), ring binder file (medium), photo copy paper colour a4, tag, lace, u pin, register 2q, register 4q, punching machine small dp 52, punching machine big dp 500, stapler machine small, stapler machine big, stapler pin small no-10, stapler pin big no-24/6, white envelope superior (11x5), white envelope superior (9x4), white envelope (fs), yellow envelope (a4), yellow envelope (a3), post it (2x3), post it (3x3), self adhesive cello tape 1", self adhesive cello tape 2", self adhesive tape colour 1", self adhesive tape colour 2", cd marker ohp, v-7 pen, v-5 pen, add gel pen, uniball pen, ordinary pen, spiral diary, program stand, add gel pen refill, t-pin, u pin steel, gum tube, gum bottle big, gum bottle small, glue stick, pad ink bottle, pentonic ball pen, highlighter, board marker, scissors (small), scissors (medium), scissors (big), white fluid pen, dak pad, pencil pkt., sealing wax packet, sketch pen set, pocket card, ink pad plastic, document button folder, document strip folder, pokar (steel handle), pokar (plastic handle), paper cutter, officer diary, plastic flag, steno diary, sticky note pad, fevicol, cobra spring file, white board small, white board big, dot matrix printer computer paper, eraser, sharpeners, calculator big, calculator small, parker pen ink, do letter paper a4, file tray, scale steel, binder clip 19mm, binder clip 32mm, wipro spiral diary, magnetic white board duster, room freshner, air wick refill, black hit, all out machine with refill, all out refill, hand wash pouch, phenyl (01 ltr.), harpic, phool jhadu, seenk jhadu, pocha dande wala, wiper, naphthalene balls (phenyl goli), knife (coconut cutter), duracell aa, duracell aaa, wall clock cell aa, battery 9v, electric cattle, small squat glasses (borosil), glass medium (borosil), borosil radius cup and saucer set, air tight jar (borosil) 1000ml, air tight jar (borosil) 500ml, quarter plate, towel, napkin towel, dusting cloth, bowl, spoon packet, service tray (full size), bone chaina cup set, steel tea stainer, induction cook top, odonil, tissue paper normal, air wick spray machine, file bag, doormat (joot), doormat (plastic), lizol floor cleaner, bathroom fragrance (aer power pocket), plastic bucket, dustbin, plastic mug, umbrella small (pocket), umbrella big, wireless bell, ac top, 2 pin top, electric tape, micro lithium cell, micro lithium cell duracell, alkaline battery, rin bar detergent cake, dettol soap, bulb normal, led bulb 5 watt, led halogen light, led surface panel light, led pannel light (2x2), mosquito racket, spike, waste pipe, circle cable clip, led batten (complete tube rode), led bulb (9 watt), led bulb (9 watt) warm white, house electric wire 2.5 mm, house electric wire 1.5 mm, house electric wire 1.0 mm, flexible wire, siingle pole mcb 32 a, double pole mcb 32 a, t n p mcb, gang box(3x3), gang box (2x2), electric switch, electric socket 6 amp, electric socket 16 amp, modular switch 6a, modularswitch 16a, modular socket 6a, modular socket 16a, 3 pin plug 6 amp, 3 pin plug 16 amp, ss combined with box, capacitor 3.15 mfd, capacitor 4.0 mfd, colin, curtain rod steel, bracket for curtain, curtain rod stand, door closer, keyboard channel, screw 1", screw 1.5", lock 50 mm, lock 65 mm, cat 6 cable make d-link, rj 45 connecter, 5 port switch make d-link, usb printer cable (1.5mtr), usb printer cable (3mtr), usb printer cable (5mtr), vga cable (1.5 mtr), vga cable (3mtr), vga cable (5mtr), power cable, mouse pad, ups battery, crimping tool, lan cable stripper, cat 6 cable jointer, wi-fi dongle, ethernet lan port switch, keyboard make dell/hp, mouse make dell/hp, antivirus make quick heal (3 user), ms office professional license key 2024, mobile charger adapter for apple,

corporations/Associations/Others

CTN :45285849

01 Jun, 2026 NA

Deoghar - Jharkhand

Tender For providing building material like reinforcement steel bar, stone aggregate, sand, stone dust and cement

State Government

CTN :44927486

10 Jun, 2026 1.51 Crore

East Nimar - Madhya Pradesh

Tender For corrigendum : procurement of spare parts of ring granulator of l and t make for chp-i, 2x600mw, sstpp, mppgcl, dongalia. - suspension bar, moc- astm-a322 grade aisi 4140 suspension arm (01 set. = 25 nos. for one no. rg), moc-astm-a108/aisi 1045 end disc drive side, moc- astm-a108/aisi 1045 end disc non side, moc- astm-a108/aisi 1045 cage frame (without screen plates & adjusting mechanism), moc-is:2062 breaker plate, 1set=2nos for 1no rg with fixing bolts, moc-mn steel is:276, gr.iii 45mm thk. upper screen plate, 1set=2nos for 1no rg with fixing bolts, moc-mn steel is:276, gr.iii 45mm thk. lower screen plate, 1set=2nos for 1no rg with fixing bolts, moc-mn steel is:276, gr.iii 45mm thk. kick off plate, 1set=2nos for no rg with fixing bolts, moc-mn steel is:276, gr.iii 40mm thk.

Central Government/Public Sector

CTN :44728322

27 May, 2026 7.85 Lacs

Nicobar Island - Andaman And Nicobar Islands

Tender For bid to ras supply of naval store items - dry chemical powder 05 kg pack , anti cockroach gel , emery cloth abrasive 11 x 9 is grit 36279 mm x 227 mm , cloth coated pvc 102 cm wide , bucket plastic 20 ltrs capacity , bucket plastic 15 ltrs capacity , brush scrubbing large , boric powder , bleaching powder stablised , lugs brass , oil and grease remover , rope polypropylene 08 mm isi mark , rope polypropylene 6 mm isi mark , rope polypropylene 04 mm isi mark , petroleum jelly , paint brush 3 inch , paint brush 1 by 2 inch 13 mm , paint brush 1 inch , gloves leather a , emery cloth abrasive cloth is grit 36 , twine sewing fine , thinner , chain ni silver for call boatswain , call boat swains , tape measuring steel 15 meter in metallic case , white spirit , turpentine oil , tape roll seal teflon thread of 12 mtrlength 0 point 1 mm x 1 point 25 cm , tape transparent water proof self adhesive cellulose film 38 mm wd , soap hard yellow , tape transparent 2 inch , dvd , envelope cloth coated 12 inch x 16 inch , envelopecloth coated 10 inch x 14 inch , envelope cloth coated 9 inch x 12 inch , envelope size 10 inch x 14 inch , envelope size 6 inch x 12 inch , envelope size 4 inch x 10 inch , tape transparent 1 inch , brown sheet laminated , cleaner white toilet , duster cloth a , cloth sponge 18 cm x 20 cm , brush sweeping hand soft broom , super mop refils , polish metal brass , feather broom , broom country , super mop , tray paint roller , glass cleaner 500 ml , red oxide iron geru pigment powder iron oxide natural red , rags cotton coloured , cotton waste , hand wash liquid , disinfectant fluid white or black phenoil , cleaning liquid for utensils , lime slacked , cleaning bar for utening vim 500 gm pack , blue laundry isi mark ) /bid number : gem/2026/b/7388328 * /dated: 02-04-2026 & & / bid document 1 / 47

Rotor Bar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors