Latest rough machining Tenders | Government rough machining Tenders

Central Government/Public Sector

CTN :45313461

28 May, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For spindle rough machining for qcnrv valve assy,stvqn5017.

State Government

CTN :45249557

29 May, 2026 50.00 Lacs

Balotara - Rajasthan

Tender For annual rate contract for providing new water service connection with material under division balotra - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement

State Government

CTN :45228145

03 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of ci cs casted items - c.i. casted items on new basis, c i door of boiler as per drawing no ksc/blr/door/35tph approx weight 50 kg suitable for working apto 800 degree centigrate, c.i. tool post of plainer machine approx weight 18 kg each, c i bagasse chuite of boiler as per drawing no ksc/blr/chuite/35tph approx weight 160 kg suitable for working apto 800 degree centigrate (duly machined), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling different size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, c.i. casted items (on conversion basis), c i door of boiler as per drawing no ksc/blr/door/35tph approx weight 50 kg suitable for working apto 800 degree centigrate, c.i. tool post of plainer machine approx weight 18 kg each, c i bagasse chuite of boiler as per drawing no ksc/blr/chuite/35tph approx weight 160 kg suitable for working apto 800 degree centigrate (duly machined), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling difrent size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, cast steel spur gear & pinion new basis, c.s. trash beam for mill size 33"x66" as per drawing approc weight 1 mt, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.s.sproket-36 teeth for duplex chain 2 1/2" pitch material 2708 drg no ksc/boiler-163, c.s. sprocket 17 teeth for duplex chain 2 1/2" pitch material 2708 drg no-ksc/mill/4887, opertuinity device of trash turner beam material-ss drg no. mills-8488, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-10, fw-110mm od-260mm bore-50mm, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-8, fw-120mm od-208 mm bore-50mm, c.s.worm shaft ( as per sample) for mill, c.s. mill coupling (weight 700kg approx) as per drawing, c.s. mill crown pinion 16 teeth (weight 1500 kg.) as per drawing, cast steel spur gear & pinion on conversion basis, c.s. trash beam for mill size 33"x66" as per drawing approc weight 1 mt, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sproc

Central Government/Public Sector

CTN :45205411

25 May, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For various types of spindle rough machining for qcnrv valve assy, favqn4957.

Central Government/Public Sector

CTN :45094166

20 May, 2026 NA

Medak-T - Telangana

Tender For corrigendum : framework agreement (rate contract) for rough machining (vtl and hb) operation of bfp pump casing mdg series for a period of 2 year.

CTN :43466188

13 May, 2026 NA

Parganas - West Bengal

Tender For bid to ras rough machining and parting of ssb-27 as per diameter 163(+ 2) mm x length 413 (+ 5) mm as per scope o

Central Government/Public Sector

CTN :45083412

06 May, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For stvof4981-ofe-gate-4772 rough machining

Central Government/Public Sector

CTN :45019429

30 Apr, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For envof4971 ofe fbv body-4769 rough machining

Central Government/Public Sector

CTN :44993148

04 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of carbide insert c c - carbide inserts snmm 120408 cvd- pvd-coated , carbide insert snmm 190616 cvd-pvd coated , carbide insert snmm 190612 cvd-pvd-coated , carbide insert cnmg 120408 cvd-pvd-coated , carbide insert cnmg 120412 cvd-pvd-coated , carbide insert cnmg 190616 cvd-pvd - coated , carbide insert cnmg 190612 cvd-pvd- coated , carbide insert snmg 190612 cvd-pvd- coated , carbide insert cnmm 190612 cvd-pvd -coated , carbide insert tpan- tpkn 2204 pdr cvd-pvd -coated , carbide insert tpan - tpkn 22t3 aer cvd-pvd -coated , carbide insert dnmg 150608 cvd-pvd -coated with chip breaking geometry , carbide insert span - spkn 1203 edr cvd-pvd - coated for medium machining of stainless steel material. , carbide insert cnmm 190616 cvd-pvd -coated with chip breaking geometry , carbide insert dnmg-150604 cvd-pvd- coated with chip breaking geometry , cardide insert snmm 190616 cvd-pvd-coated for rough machining operation , carbide insert cnmg 190612 cvd-pvd-coated for medium machining of cast iron material , carbide insert snmm 250724 cvd-pvd - coated with chip breaking geometry , carbide insert vcmt 110304 cvd-pvd -coated with chip breaking geometry , carbide insert vcmt 160408 cvd-pvd -coated with chip breaking geometry , carbide insert rcmx1003 mo- rcmt 1003mo cvd-pvd coated with chip breaking geometry , carbide insert cnmm 250924 cvd-pvd -coated with chip breaking geometry , carbide insert rcmx1204 mo- rcmt 1204mo cvd-pvd coated with chip breaking geometry , carbide insert span- spkn 1504 edr cvd- pvd -coated for rough machining of stainless steel material , carbide insert apmt 1604 pder-pdr cvd- pvd - coated to suit the existing cutter bap400- 063a06r of mitsubishi make

CTN :44940101

24 Apr, 2026 8.00 Lacs

Barmer - Rajasthan

Tender For guarding system, cleaning system, highly skilled worker (computer operator) all work related to e-nam project, electrical system maintenance, water system, water supply (water tanker supply), kisan kaleva system, canteen jeera mandi, cleaning grading machine operation

Rough Machining Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors