Latest roughness tester Tenders | Government roughness tester Tenders

CTN :45742608

15 Jul, 2026 2.08 Lacs

Chennai - Tamil Nadu

Tender For supply of portable surface roughness tester (q3)

Central Government/Public Sector

CTN :45718586

09 Jul, 2026 NA

Hyderabad-T - Telangana

Tender For supply of portable surface roughness tester

Central Government/Public Sector

CTN :45708596

31 Jul, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of set of surface roughness tester with standard detector/drive unit for testing on flat & curved surfaces conforming to astm d4417. technical specifications & quantity as per attached annexure- 1. make:- mitutoyo, insize, samsonic or similar. [ warranty period: 12 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45712936

13 Jul, 2026 19.20 Lacs

Sonbhadra - Uttar Pradesh

Tender For running maintenance of plc system - running preventive and breakdown maintenance of plc control system with electrical drives all control and instrumentation system of ash handling , replacement new erection of impulse line , replacement new erection of instrument fitting adopter nut tails elbow connector etc , overhauling b 501 and b 601 ss cock valve , overhauling repairing of junction boxes , servicing recalibration erection of fuzi yokogava rosemount etc transmitters , overhauling and recalibration new erection of digital indicators , overhauling and recalibration erection of flow meter conductivity meter , complete overhauling erection of level switches , replacement of pressure switch gauge vibration switch , removal testing erection commissioning calibration of temp gauges switches thermocouple , replacement erection overhauling cleaning of union isolating valveforged body valve , blowing of tapping points of different pressure transmitters switches , fabrication repairing of instruments plateform , laying patrolling of instrumentation cable , servicing and maintenance of air conditioner , cleaning of control room plc system , repairing of ups , service replacement of faulty butterfly valves along with act , servicing replacement of faulty diaphragm type valves , changing spindle gland of root valves , cleaning blowing by air of impulse lines , attend leakage from steam water air line , replace gauges switches of pressure temp , testing caliberation of pressure gauges , testing calibration of pressure switches , testing calibration of temp gauges , testing calibration of temp switches , replacement of thermocouples , cleaning servicing of terminal block in compressor house swas system , changing of ss root valves , servicing of 10mm hp lp 3way manifold valves , replace of 10mm hp lp 3way mfold valves , removal choking replace of impulse line , erection replacement of pvc armored compensate cable , replacement of universal digital indicator , servicing replacement of faulty 4way valve with actuator , replacement remounting of smps 24 v dc , dismantling replacement of combination timerof compressor , servicing of sampling cooler dhx18 sco2 , servicing of sampling cooler dhx12 sco2 , servicing of sampling cooler dhx06 sco1 , miscellaneous mechanical febrication , maintenance of actuator of butterfly valve , maintenance and upkeep of terminal box of motor of actuators in cw pump , maintenance re erection of butterfly valve actuator motor , revisioning and upkeep of marp dcs panel , revisioning testing of various type of switches of local control panel , maintenance revisioning upkeep and testing of 415 v power supply module , maintenance upkeep and repair of junction box of butterfly valve , servicing of mov motors actuators and limit switch assembly , checking cleaning and cable dressing mov motor , overhauling cleaning reconditioning of various size batteries , load test once in six months for various size battery of ups installed for 5x200mw , replacement of damaged switches mcb in acdb panel , cleaning painting of the wooden battery stands , maintenance of window type split type ac , gas charging of ac , rewinding of burnt fan motor

Central Government And Public Sector

CTN :45714649

18 Jul, 2026 NA

Multi City - Multi State

Tender For supply of portable surface roughness tester

CTN :45671759

01 Jul, 2026 55.80 Lacs

Bhiwandi - Maharashtra

Tender For providing and supplying spare parts for all type of borewell as per requirement in b.n.c.m.c. area 2026-2027 - providing and supplying spare parts for all type of borewell as per requirment in bncmc area 2026-2027, :item no. 1 : providing and laying in trenches following mm dia. medium grade having embossed as isi mark galvanised iron pipes ?of kilogram/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats including removing existing pipe line if necessary and conveying and stacking the same in pwd chowky or as directed etc. complete. pwd ssr 2022-2023 pg no 268 41.20,41.21 25 mm dia, 32mm dia, item no. 2 : providing and supplying blue mdpe pipes conforming to iso 4427:1996 manufactured from virgin resin pe 80 food grade compounded raw material having blue colour only with quality assurance certificate from quality agencies like wrc / cipet (india) / dvgm / kiwa / spgn etc. for usage in drinking water system. the cost shall include testing of all materials, inspection charges, transportation up to store, transit insurance, loading, as specified and directed, unloading,stacking excluding gst levied by goi & gom in all respect, etc. complete as specified and directed.mjp dsr 2023-24 pg no 128/1/b 25 mm dia, 50 mm dia, item no 3 providing, erecting and giving test of centrifugal monoblock pump set conforming to is 9079 operating at 2900 rpm with ci impeller, priming funnel, cock, suitable flanges at suction and delivery side. pump shall have common shaft for pump and motor. motor shall be suitable for working on 415 v 10%, 3 ph, 50 hz a.c. supply. motor shall be tefc type. pump set shall be suitable for working at various discharge and head requirements. pump shall be erected on provided c.c. foundation block with suitable foundation bolts grouted in c.c. foundation block.centrifugal monoblock pump set (single stage) mjp mech.csr 2023-24 pg no 5 pm 2-1-5] 10 hp, item no 4 : supplying and erecting submersible pump 150 mm dia (with bronze / stainless steel (cf8m) impeller) up to 8 stages mjp mech.csr 2023-24 pg no 01 pm 1-2-1,pm 1-2-2] 1.5 hp, 2.0 hp, item no 5 supplying & erecting pressure booster pump, single phase, 50c/s, a.c.supply of 0.75 kw/ 1 h.p., with discharge of 480 to 13 lpm for 10 to 50 mtrhead & 25 mm suction/ 25 mm delivery pipe, for domestic pressure boosting applications pwd ele csr 2022-2023 pg no 206 12-6-2, item no 6 supplying & erecting pressure booster pump, single phase, 50c/s, a.c.supply of 0.375 kw/ 0.5 h.p., with discharge of 120 to 12 lpm for 10 to 40mtr head & 25 mm suction/ 25 mm delivery pipe, for domestic pressure boosting applications. pwd ele csr 2022-2023 pg no 206 12-6-1, item no. 7 supplying & erecting automatic control panel for 1 ph, 230 volt, a.c. submersible/centrifugal pump set up to 3 hp consisting of dol starter of suitable relay range s.p.p., combined ammeter/ voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip 54 protection. pwd ele csr 2022-2023 pg no 220 12-4-20, item no.8 supplying & erecting automatic control panel for 3 phase , 415 volt, a.c, submersible/centrifugal pump set up to 7.5 hp consisting of dol starter having relay range 9-14 amp,s.p.p., combined ammeter/ voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip 54 protection. control panel should offer single phasing, phase reversal, phase imbalance etc .pwd ele csr 2022-2023 pg no 204 12-4-17, item no. 9 supplying and erecting d.o.l. starter 400v. 3 phase, 50cycles with no volt coil and overload element with necessarymaterials and connected to supply for 10 h.p., item no 10 supplying & erecting flat flexible 3 core 2.5 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.pwd ele csr 2022-2023 pg no 220 12-4-8, item no. 11 supplying, erecting & terminatin

CTN :45681541

15 Jul, 2026 NA

Liluah - West Bengal

Tender For supply of portable surface roughness tester range: 360 micron (-200 micron to +160 micron).detail specification & feature as per attached technical specification . calibration certificate from nabl accreditedlaboratory with one year validity to be provided along with the material. [ warranty period: 30 months after the date of delivery ] ]

CTN :45038451

29 Jun, 2026 NA

Meerut - Uttar Pradesh

Tender For bid to ras supply of portable surface roughness tester (q3)

CTN :45658304

06 Jul, 2026 NA

Hyderabad-T - Telangana

Tender For supply of portable surface roughness tester (q3)

CTN :45363423

29 Jun, 2026 NA

Krishnagiri - Tamil Nadu

Tender For corrigendum : supply of metrology lab items - "ultrasonic flaw detector specification ● test range: 2.5 mm to 10 meter in steel● velocity range: 1000–15000 m/s● gain: minimum 100 db with calibrated steps● frequency range: 0.5–15 mhz● display: a-scan display (lcd)● modes: pulse echo and transmit/receive● linearity:● vertical: ±3%● horizontal: ±0.5%● probes: minimum 2 (straight and angle)● connectors: standard (size 00 or equivalent)● power: rechargeable battery+ ac supply ", "optical digital microscope specification magnification: 40x to 400x● digital camera: minimum 5 mp resolution● display: pc/monitor via usb/hdmi or built-in display● illumination: adjustable led illumination● focus: coarse and fine focusing mechanism● optics: coated lenses with wide field view● stage: mechanical stage with slide holder● software: image capture, measurement, and analysis software included● connectivity: usb / hdmi/ethernet", "portable surface roughness testerspecification:● parameters: ra, rz, rq, rt● measuring range:ra: 0.005–16 µmrz: 0.02–200 µm● resolution: ≤ 0.01 µm● accuracy: ±5% or better● stylus: diamond tip (≈5 µm radius)● cut-off lengths: 0.25 mm, 0.8 mm, 2.5 mm● display: digital lcd● output: usb interface for pc connection no 50000 ● standards: iso 4287 / din /ansi compliant● power: rechargeable battery", "digital height gage with driving wheel (300)specification:● measuring range: 0–300 mm● resolution: 0.01 mm● accuracy: ±0.03 mm● construction: hardenedstainless steel column● base: ground and lappedbase suitable for surface plate● measuring tip: carbidetipped scriber● movement: smooth sliderwith fine adjustment wheel● display: digital lcd● power: battery operated"

Roughness Tester Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government And Public Sector