Latest route indicator scrap Tenders | Government route indicator scrap Tenders

State Government

CTN :41391974

23 Aug, 2025 13.00 Lacs

Wardha - Maharashtra

Tender For corrigendum : supply of construction material and equipment for construction of cement concrete road at manikwada taluka ashti district wardha

CTN :41540574

02 Sep, 2025 NA

Kargil - Jammu And Kashmir

Tender For supply of ips oblique ilcb intelligent paver system , precast concrete kerbs stone 300x300x100mm , marking stripes using a thermoplastic compound with 2mm thick 100 mm wide as per ts , plywood 4 ft x 8ft x 12 mm thick , plywood 4 ft x 8 ft x 8 mm thick , wet mix macadam as pe ts , portable fire extinguisher 25 kg , wind sock with stand , ms angle iron 65x65x6mm , ms flat iron 60x8mm , construction tools oblique testing equipment as per ts specification , welding rod pkt 4x 450mm

CTN :41426022

28 Aug, 2025 NA

Delhi - Delhi

Tender For corrigendum : supply of dewatering pump up to 5 hp special case detailed specification as per rfp , concrete vibrator detailed specification as per rfp , water treatment plant upto 2000 lph storage upto 5000 detailed specification as per rfp , soil laboratory equipment detailed specification as per rfp , survey equipment including total station detailed specification as per rfp , survey equipment theodolite type detailed specification as per rfp , water pump detailed specification as per rfp , water storage tank 10000 to 12000 ltr detailed specification as per rfp , water storage tank 12001 to 20000 ltr detailed specification as per rfp , water storage tank 5000 to 7000 ltr detailed specification as per rfp , water storage tank more than 20000 ltr detailed specification as per rfp , compactor plate detailed specification as per rfp

Central Government/Public Sector

CTN :41489566

06 Oct, 2025 1.00 Crore

Noida - Uttar Pradesh

Tender For open tender document for e-procurement of laboratory equipment (soil, aggregates, cement, reinforcing bar, concrete test equipment, water, geo-textile and geogrid) for material testing laboratory of iahe

CTN :41136440

18 Aug, 2025 NA

Kangra - Himachal Pradesh

Tender For bid to ras supply of rock craft wall with slithering trg module - earth work excavation by mechanical means hydraulic excavator manual means in foundation trenches or drains , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering , providing and laying in position specified grade of reinforced cement excluding the cost of centering shuttering finishing and reinforced , sand pit wall sand pit wall with filling loose sand filling loose sand , steel reinforced of r c c work , supplying of m s bolts round holding , supplying of m s bolts round holding down of anchor bolts with nuts and washer plates complete , providing and fixing ms plate 5mm thick. , rain shed shhet , designing providing and fixing of polyester resin fiber reinforced 3d 2d panel , providing and fi providing and fixing one set of zigzag stairs to climb the top of tower at 10 mtr heightxing one set of zigzag stairs to climb the top of tower at 10 mtr height , ss fixe imported ss fixe imported chain anchors chain anchors , movable climbing holds providing and fixing wall climbing wall equipment , climbing rope 12mm , harness , screw carabineers , quick draws , belay gloves

CTN :41227369

23 Aug, 2025 NA

Rafiganj - Bihar

Tender For corrigendum : supply of civil equipment lab - compaction factor apparatus, vee bee consisto meter, beam moulds 500mm, beam moulds 600mm., beam moulds 700mm, advanced half cell potential system, cement autoclave, sieves (fa) 20cm dia brass, flexure strength testing machine, concrete mixing tray, double wheel harrow steel trolls, concrete maturity testing equipment (imported), rebar locators, diameter and cover meters with software, (imported), cod vials, cod vials stand, pipette, digital pipette with elongated tip, conical flask, volumetric flask, measuring cylinde, funnel, funnel, beaker, reagent bottles, spatula, durhams tube, filtration assembly with oi free vacume pump, vertical autoclave, drawing software-, staad pro, open flow, printer, video camera

State Government

CTN :41333626

29 Aug, 2025 2.18 Crore

Udaipur - Rajasthan

Tender For corrigendum : purchase of various testing major apparatus (lab equipment) in quality control labs under zone ajmer, bikaner,udaipur-i and udaipur-ii - fully automatic servo controlled compression testing machine (ctm)-3000 kn capacity with additional load frame of 500 kn capacity & flexure frame of 100 kn capacity:- supplying, fixing and commissioning of fully automatic servo controlled compression testing machine (ctm) of 3000 kn capacity which should be capable of conducting compression test on concrete & mortar specimens and allied products as per is : 516 & is :4031 (part-6). the machine should be power operated with servo controlled motor capable to apply the load continuous by without shock and there shall be large enough space provided for test specimen to accommodate in a readable position. machine shall have good load control and capable of applying the load at the specified rate, uniformly with automatic control with percentage of error for load shall not exceed + 1.0% of the indicated load. the system shall have an arrangement for automatic placing system, which achieved by the combination of advance hydraulic and electronic system. the systems can be loaded in load, displacement or strain control basis. complete machine unit shall conform to is: 14858-2000 and is: 9399-1979 and as per direction of engineer in charge. the salient features and technical specification of the machine shall be as under :- i) ctm-3000 kn machine loading frame - four column high stiffness welded from with enough stabiility . - heavy duty mechanical platens with spherical seated block (vicker hardness > 550), bottom bearing, blocks, auxiliary plates (vh > 550) shall have flatness tolerance within 0.03 mm and squareness and parallelism tolerance within 0.06 mm wide.- base shall have fine finished servo controlled hydraulic cylinder with hardened and finest abraded piston. - frame with safety guard door and transparent fragment guard (both front & rear) (ii) hydraulic pumping system, it should be compact in design and suitable for the supply of required flow and pressure for the movement of the actuactor. it shall have oil tank of adequate capcity vane type pump powered by three phase motor. anti vibration mounting shall provided as standard along with the hps.iii) micro-processed (plc & hmi) based touch panel display & control system user friendly interface control system with application software shall provide the digital servo control, precise operation, ramp generation for the machine, data acquisition, storage, processing, analyzing and reporting etc for the continuous operation of the system.iv) technical specification of ctm (3000 kn) capacity -3000 kn, platen size 320 mm dia, ram dia 260 mm, ram travel 50 mm, vertical daylight clearance 350 mm, horizontal daylight clearance 370 mm, least count - 0.1 kn, pace rate controlling -1%, rate of loading 1.3 mm/min (when running idle), 0.14 to 032 mpa/sec (with specimen), motor capacity 3 hp (min), power supply (240v, 50-60hg, three phase.), capacity of oil tank 20 litre, max. operating pressure 210- 600 bars, flow of pump 2 & 4 lpm (duel speed) , auto stop & release of pressure when specimen failure, multi operation compression test up to 3000kn, up to 500 kn range and flexure test, accessories spacers- 4nos, controller unit auto pid operation with closed loop update rate of 10 khz to control pace rate automatically as programmed. start, stop & hold test system, load control 01kn/sec to 50 kn/sec., displacement control 0.01 mm/sec to 1mm/sec. load indication & control coloured touch screen display of suitable size, test report facility to print test report, export data to ms excel. auto internal calibration without proving ring, short circling protection overload safety cut off, piston over travel safety cut off- shall be made in addition to 3 kva 3 ph servo control stabilizer, technical specification of ctm (500 kn) load frame- capacity 500 kn, platen

State Government

CTN :41333627

29 Aug, 2025 1.47 Crore

Udaipur - Rajasthan

Tender For corrigendum : purchase of various testing advanced apparatus (lab equipment) in quality control labs under zone ajmer, bikaner,udaipur-i and udaipur-ii - ultra sonic pulse velocity testing instrument :-supplying ultra sonic pulse velocity testing instrument for non destructive testing (ndt) of hardened concrete to asses the quality of concrete in term of dense, homogeneity and uniformity. instrument shall also be capable of crack & void detection and elastic properties measurment of concrete. the apparatus for ultra sonic pulse velocity measurment shall consist electrical pulse generator, transducers in one pair, standard calibrator bar, amplifier, electronic timing device. performance requirement of apparatus shall be as under :-- transit time accuracy within - 1 % range- range of time - 20 s to 10 ms- referance specimen - two no. usually steel bars having pulse transit time 25 s to 100 ms with accuracy 0.2 s- transducer - one pair - piezo electric and magneto strictime type frequencies in between 10khz to 200 khz, contact type ultra sonic concrete tester range - upto 5 mtr. & 5 mtr. and aboveaccuracy - 100 nano second- power - 7.2 v (dc), rechargable bettary - oper. temperature - 0 to 500 c - resolution - 0.1 s- display - 128x64 graphic lcd - display response time - instantaneousstandard accessories :-1- 1 set of 7.2 v nicd cell2- probe cable 2 no. (4m each)3- transduces - 2 no. (50 mm dia, 60 khz)4- calibration block alongwith verification block with nabl traceability certificate5- cover /bag instrument shall meet requirements of is: 516(part-5/sec.-i) 2018, en 12504-1 & astm c 597. standards.the complete item shall be supplied as per direction of engineer in charge . rates are inlusive of all taxes ., rotational viscometer : supplying & installation of rotational viscometer of spring torque model for higher viscosities that specially designed for conducting high-temperature testing of ashphalt binders in compliance with astmd 4402/d4402m-23 and is: 73-2013,is :15462-2019 & is:17079-2019 .standards . it should be capable to determine viscosities of liquids. like oil, ashphalt & solvent etc.key feature of apparatus shall be as under :-precise temperatures control unit to ensure precise temp control and maintaining content & accurate testing temperatures.user friendly inter face to easy to use and display of accurate result.level indicators surface level indictors should be our both the temp control unit and the main unit to ensure equipment remain level.versatile spindle options capable of with standing the demanding condition of ashphalt testing., builtin micro printer for convenient result printing., automatic range calculation capable of automatic full scale range (fsr) calculation for 100 % viscosity with specific spindle and speed combination., window based software shall include window based software for creating viscometer vs temperatures course with test data continently stored ms excel., high-visibility lcb the lcb display features a white backlight for enhanced visibility and clarity.technical specifications of apparatus shall be as under :-rotation speed 0.1- 250 rpm, viscosity measurement range 100 cp to 64m cp, torque range high up to 57496 dyne.cm ( 5.749 mn.m) ,spindles set of large spindles as required, torque range 10%- 100% full -scale torque, measurement error: 1% (f s), temperature controlling range: up to 200 c, temperature controlling accuracy: 0.1 c, cubage of sample cylinder: 20ml, serial interface: rs232, working environment: ambient temperature: 15 c to 35 c, 85%, operating voltage: ac (220v 10%)v, 50hz, single phase, total power consumption: 200w, components included of apparatus shall be as under :- -head of viscometer -auxiliary controlling case (containing a temperature controller and a micro-printer), - thermo-electric heater, -spindles made of aisi 316l as per requirment with adaptor, -pen drive for pc software setupstand, external power supply connection cable, ins

CTN :41314340

16 Aug, 2025 NA

Delhi - Delhi

Tender For supply of dewatering pump up to 5 hp special case detailed specification as per rfp , concrete vibrator detailed specification as per rfp , water treatment plant upto 2000 lph storage upto 5000 detailed specification as per rfp , soil laboratory equipment detailed specification as per rfp , survey equipment including total station detailed specification as per rfp , survey equipment theodolite type detailed specification as per rfp , water pump detailed specification as per rfp , water storage tank 10000 to 12000 ltr detailed specification as per rfp , water storage tank 12001 to 20000 ltr detailed specification as per rfp , water storage tank 5000 to 7000 ltr detailed specification as per rfp , water storage tank more than 20000 ltr detailed specification as per rfp , compactor plate detailed specification as per rfp

corporations/Associations/Others

CTN :41318522

19 Aug, 2025 NA

Trichy - Tamil Nadu

Tender For construction of control room building ,cable duct, providing foundation concrete structure , equipment plinth , road work and other related civil works for the proposed 110 kv ss at kattusellur .

Route Indicator Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

State Government

corporations/Associations/Others