Latest route locator scrap Tenders | Government route locator scrap Tenders

Central Government/Public Sector

CTN :45546548

22 Jun, 2026 NA

Mughalsarai - Uttar Pradesh

Tender For supply of intelligent universal programmer specification: (i) 48 pin dil/zif socket with respectable for 8 pin to 48 pin,300/600 mil devices.(ii) four dac for vcc,vpp1,vpp2 and vpp3 with 8 bit resolution. software controllable rise time and current limit protection (iii) logic driver supports pull-up/pull down or high impedance on all 48 pins with 2v-5 v level.(iv) memory: prom,eprom,eeprom, flash,serial prom,nvram (v) logic:pal,gal,cepal,cpld,epld (vi) others: otp/flash microcontrollers (vii) hex automatic detection andconversion (viii) accepts jedec test vectors upto 48 pins 2500v/micro second rise time(ix) working with windows 10(64 bit) and above. [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45546753

18 Jun, 2026 NA

Agartala - Tripura

Tender For industrial safety helmet and h/l voltage approach electric alarm. technical parameters: power supply: 2 nos. cr1632(140 mah) button cells included, alarm range: 1 kv-500 kv(high voltage alarm), working frequency: 50hz/60hz, electricity testing mode: non-contact mode, detection mode: automatic trigger, alarm distance error: +/- 10 cm (under base condition), dimension : 88mm x 32mm x3mm, alarm mode: indicator- led light visibility under 8000 lx visible, buzzer- above 60db(form 60 cms distance), protection level: ip54 similar to metravi model no- ht-500. make: metravi/bosch / fluke [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45414122

17 Jun, 2026 1.90 Crore

Jalandhar - Punjab

Tender For corrigendum : prov installing and drilling of 550 mm dia bore with reverse rotary rig up to 160 mtr. depth including cost of 20 mtr stainless strainer const of pump chamber pumping machinery di fitting rising main ohsr of 250 kl capacity complete in all respect. - augmentation of water supply scheme village padhiana block adampur distt. jalandhar (under head: nabard 31/4215) providing, installing & drilling of 550 mm dia bore with reverse rotary rig up to 160 mtr. depth including cost of 20 mtr stainless strainer, construction of pump chamber of size 3.05m × 3.70m with wc, providing & installing pumping machinery, di fitting, disinfections unit, rising main(10kg/cm2), household connections with water meter and distribution system, solar panel, bulk meter, environmental charges, development of water works, construction of 1 no. ohsr of 250 kl (2,50,000 ltrs) capacity with sill level not less than 23.50m height upto fsl 27.50 m from formation level complete including the cost of inlet, outlet, overflow & scour & vertical pipes, di duck foot bends, expansion joints, puddle collar, lightening conductor, earthing, aluminium ladder inside the ohsr stair case, scour/overflow sluice valves, d/f extension joints, automatic electronic water control device and construction of plinth protection around ohsr, all civil works as per site complete in all respects.

Central Government And Public Sector

CTN :45550893

19 Jun, 2026 NA

Bilaspur - Chhattisgarh

Tender For supply of single phase 2 hp submersible pump starter, having contactor 02 pole and thermal ol relay (make: havells, bch, lsis, l&t) with start and run capacitor, panel meter indicator and on off push button, panel should be automatic and no need to push extra push button to change capacitor, provision require for connecting externally minilec make water level controller or eapl/ l&t time switch to make it fully automatic. make: lsis, bch, l&t, kirloskar or equivalent [ warranty period: 30 months after the date of delivery ] ]

CTN :45540236

23 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For purchase of lab equipments for chemistry lab in basic engineering department - purchase, digital electronic balance /analytical balance load capacity: minimum 500 g readability: 0.01 g linearity: 0.02g display: lcd/led tare function: required top pan type power supply: 220 240 v ac, 50 hz, digital tds metermeasuring range: 0 9990 ppm resolution: 1 ppm display: lcd automatic temperature compensation (atc): required waterproof: minimum ip67 protection power source: battery operated (button cell/aaa battery), digital ph meter benchtop model ph type microprocessor/microcontroller ph range: 0 14 resolution: 0.01 ph accuracy: 0.05 ph or better combined ph electrode with temperature sensor two or three-point calibration facility temperature compensation type automatic display: lcd power supply: 220 240 v ac 50 hz warranty minimum 1 year, laboratory heating mantle (knitted glass yarn) capacity: 500ml temperature range: ambient to 350 c energy regulator/control knob: required power supply: 220-240 v ac 50 hz, electric bunsen burnerelectrically operated energy regulator/ control knob operating temperature 800 c body: stainless steel power supply source: corded electric, supplied with a heavy-duty, heat-resistant, earth-grounded, 3-pin power cord (minimum length 1.2 meters). power consumption: between 350 and 500w power supply: 220-240 v ac 50 hz, water distillation unitoutput capacity: 4 litres per hour (lph) ph value: 5.5 to 7.0 conductivity (raw water distillation):3.0 4.0 s/cm or less glassware material: borosilicate 3.3 glass (pyrex/duran equivalent) heating elements: silica- enclosed quartz heaters or chromium-plated element variants power supply: 220 240 v ac 50 hz / 60 hz, single phase automatic water level cut-off

Central Government/Public Sector

CTN :45513751

22 Jun, 2026 99.52 Lacs

Ahmedabad - Gujarat

Tender For supply of tirfor two pint five tor one point five t , tirfor 5t or 3 t , pull lift zero point seven five t or zero point eight t , ladder trolley suitable to move on railway track , earthing discharge rod complete , aluminium straight ladder extendable type , first aid box made of gi or al sheet , stretcher two fold type , set of 4 fire buckets of 10 l capacity , portable fire extinguisher dry chemical powder , portable fire extinguisher dry chemical powder type and suitably mounted on trolley , d shackeles set of alloy steel , set of steel slings with eye on each end , stainless steel digital micro meter , bench vice 6 inch suitably mounted on steel table , canvass tarpaulin 12m by 12m with ropes and spikes of adequate size , portable 5kva silent diesel gen set with battery push button start , binoculars , vernier calipers digital , digital multi-meter , high sensitivity digital multi-meter , aluminium self supporting stool type magjic pole ladder 8 feet long , drop out fuse pull rod made of fibre body extension type and suitable for use on 25 kv ohe , half inch square drive socket set containing 22 sockets with 5 attachments packed in power coated carrying case , transformer oil acidity testing kit with all accessories , portable arc welding machine 250 a capacity , clip on digital tong tester suitable for measuring ac current 600amp , digital breaker time interval meter , insulation megger with voltage selectable range of 250v and 500 v and 1000 v , supply of automatic transformer oil bdv testing kit , transformer oil filtration plant 125 litre per hour capacity , auto transformer which should be close type dimmer , load cell tester suitable for 40 ah and 200 ah battery , spanners set , 52 pieces socket set with storage case , insulation megger with voltage selectable range , supply of digital ground or earth tester , thermal imaging camera with software , fully automatic capacitance and tan delta test set , transformer oil as per is 12463 , ratchet lever hoist three point two ton , ratchet lever hoist one point six ton , universal come along clamp , extension ladder 2 by22 , pillar drill machine , bench grinder , portable welding generator set , industrial safety belts and harnesses , heavy duty contact wire cutter 36 inch suitable to cut copper contact wire 107 sq.mm , supply of dropper wire cutter size 12 inch. , single sheave pulley block wheel size three point five inch by half inch , single sleave pulley of fibre of size three point five by half , single sleave pulley blockof steel of size six by one , polyester slings with 1 tonne , double ply polyester webbing slings , ply polyesterwebbing slings with load capacity 3 tonne , polyester slings of 4 m and 10 m , supply of contact wire splicing jig suitable to splice 107 sqmm contact wire , angle cutter electric 355 , supply of 5 drill bits rotary hammer drill ndrf , fiber ladder of 11m and 8m , atd bearing removal tool , hydraulic crimping tool , spring loaded stabilizer auger type post hole digger , digital spirit level , single point laser class ii handheld digital infrared thermometer , hydraulic dyanamometer 10 ton capacity with steel carrying box , 4 stroke engine telescopic pole , digital camera , hand operated rotary barrel pump , chain pulley block 3 tonne capacity with standard lift 3 meter as per is 3832 , fibre body handheld electric blower , magic pole ladder 8 feet made out of aluminium side section , transformer oil sampling bottles, size 1500 millilitre in box. , contact resistance meters measuring range 100 milli ohm , digital lcr meter 3 one by two digit 1999 counts , supply //bid details 2 / 62 of magnetic drill machine with magnetic stand , rechargebale portable battery operated hand cutter

State Government

CTN :45521250

29 Jun, 2026 42.81 Lacs

Jaipur - Rajasthan

Tender For nit 21 work of replacement of submersible pump sets and accessories of tubewell at various locations under uwss chomu under jen section chomu (urban) under sub div chomu in jurisdiction of executive engineer, phed district division ii, jaipur - 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.2 up to 5.5 kw (7.5 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.4 7.5 kw (10 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.6 9.3 kw (12.5 hp) & head above 120 mtr., 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. the size of cc platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. the panel should have opening of suitable size in front of space for energy meter with glass for meter reading. the operation of panel should be suitable for on 440 volt ac supply.2.18.1 above 5 hp and up to 10 hp, 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. t

State Government

CTN :45502053

16 Jun, 2026 NA

Jalgaon - Maharashtra

Tender For supply, erection, testing, and commissioning of electrical equipment and fire extinguishers for the kurha pdn scheme.-oil conservator with filling hole with cap and plain oil level gauge. silica gel dehydrating breather charged with silica gel. ,,oil drain valve. ,oil filter valve. ,lifting eyes/hooks. ,two earthing terminals ,diagram and rating plate. ,air vent ,explosion vent. ,100 mm dia thermometer with thermometer pocket. ,four bi directional plain roller. bucholtz relay. , resistance temp. detector. ,marshalling box. , automatic voltage regulator (avr), 16)

CTN :45377781

13 Jun, 2026 NA

Allahabad - Uttar Pradesh

Tender For bid to ras supply of anti skid rubber hollow mat 22mm , submersible pump 3 hp , starter , 3 core copper flat cable size 2 point 5 sq mm , automatic water level controller , gi pipe 3 inch , gi on off cock 3 inch , gi elbow 3 inch , gi tee 3 inch

corporations/Associations/Others

CTN :45495363

23 Jun, 2026 3.60 Lacs

Villupuram - Tamil Nadu

Tender For supply and delivery of kitchen equipments for amma unavagam in villupuram municipality - supply and delivery of steam boiler with stand & burner water capacity 250 liters, operated by both lpg and fire wood, outer shells 8mm ms plate, inner shells 14 g (2.5mm thickness) 304 grade ss with 10 g (3mm thickness) 304 grade ss sheet, automatic float valve assembly, safety valve, pressure gauge meter, water level indicator, drainage valve, flame sensor, rubber gasket for inner vessel lid, ms stand 45x45x6mm angle, high pressure burner, ncv with fittings for lpg and chimney 10 feet.(to generate steam) , steam generator (m.s outer :28 dia x 45 h, s.s inner 17 dia x 35 h) , m.s.fire bar stand , 6 " dia ms smoke pipe (3feet) , supply and delivery of rice vessel 25 kgs capacity, operated on steam made out of 14 g (2.5mm thickness) 304 ss sheet, lid and tilting handle, side support ‘u’ clamp, unloadable by tilting the handle, mounted on a type tubular ss stand 6mm thickness, ss flat with lick rod.(rice cooking & mu ltipurpose vessel) , supply and delivery of dhal vessel 25 kgs capacity, double jacketed, made out of 14 g (2.5mm thickness) 304 grade ss sheet with lid, tilting handle, side support ‘u’ clamp safety valve, steam trap, unloadable by tilting handle, mounted in a type tubular ss stand 6mm thickness ss pipe, ss flat with lock rod.( size 16" dia x 16 h , 50 ltrs to make dhal without mixing steam in dhal) , supply and delivery of single burner cooking range size : 24”l x 24”b x 18”h, top : 304 grade 16 g ss sheet, frame : 32x32x6mm ms angle, covering : 20 gauge ss 304 grade sheet four sides, pan support : 1 no cast iron grid, burner : 1 no, t 35 high pressure burner lpg with fittings, ncv : 1 no, legs : 1 ½” 16 g ss 304 grade pipe legs with adjustable nylon bullet legs.(for cooking purpose) , supply and delivery of double burner cooking range size : 48”x27”x16”, top : 304 grade 16 g ss sheet, frame : 32x32x6mm ms angle, covering : 20 gauge ss 304 grade sheet four side, pan support : 2 nos cast iron grid, burner : 2 nos, t 35 high pressure burner lpg with fittings, ncv : 2 nos, legs : 1 ½” 16 g ss 304 grade pipe legs with adjustable nylon bullet legs. , supply and delivery of idly cooking unit, ss vessels, plastic materials, mixie, tilting grinder, pulvariser grinder and other equipments , ss rice karandi, big size , ss sambar karandi, big size , ss water drum 50 litres capacity , ss water jug , ss plates, round plain , ss tumblers, with curved edges, 300 ml capacity , mobbu , plastic tray , plastic pot , plastic mug , plastic drum, 50 litres , plastic container (10 litres , plastic muram , plastic stool medium , cloth mat , hot box , mixer heavy duty 1 hp, 3 jar , tilting grinder 15 litres capacity , wall clock , supply and delivery and fixing of r.o plant isi make, with control panel, sand filter vessel, carbon filter vessel, 10 micron filter, 4 membrane, 4 membrane housing, 10 filter housing, 2 pressure gauge, booster pump (cri), 2 vessel valve, pebbles as required , gst. 18% (cgst-9%, sgst-9%) , , , , , ,

Route Locator Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors