Get complete information related to latest Rubber Bag Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Rubber Bag Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Rubber Bag Tenders.
Tender For supply of set of rubber gasket for fuel tank 1540 liter capacity for lhb power car as per drawing no. g oc/d/sk-2-16066 (annexure c) confirming to rcf spec mdts 100, rev 2. item 1 to 6, each set consist of 6 i tem (item 1 to 6 of the drawing) & quantity as per drawing i.e. item 1- 02 nos, item 2- 04 nos, item 3- 04 n os, item 5- 8 nos, item 6- 4 nos (01 set consist of 6 items & 26 quantity). note: as per drg. item no. 5 requi red outer dia od is 180 mm in place of 160mm. [ warranty period: 30 months after the date of delivery ]
Tender For door seal (sealing rubber for cab door) as per clw drg no.1209-09-433-070, (4.5 meters long). note: 1. one sample to be got approved before effecting bulk supply. 2.supply should be staggered in two spells. (i.e ist spell to be supplie d within 1 month from the date of issue of purchase order. iind spell to be supplied after 6 month from ist spell supply. each spell q ualty:100 nos. manufacturing date of item should be within one month before the date of supply each spell.3. supply by sources as per clw item id: 2101221 in ireps vendor directory [ warranty period: 30 months after the date of delivery ]
Tender For tender for supply of photometric field testing of agl fixtures at kushinagar - carrying out /making in-field measurement/testing of intensity , beam spread/coverage , orientation , chromaticity , luminous factor , setting of field alignment , toeing angle , elevation angle as per the requirement of site & icao/civil aviation requirement (car) section-4 aerodrome standard & licensing series b part-i for inset/ elevated type approach , runway edge , runway end , threshold , taxiway , papi airfields ground lights , by using vehicle mounted mobile testing equipment system / frame reader , submission of test reports etc. complete as required as per tender scc and technical specification. if chromaticity , luminous factor found satisfactory for more than or equal to 75 percentage of fixture in the test then agency has to do again above testing as per item description for balance number of fixtures (less than or equal to 25 percentage fixtures) after rectification of fittings (rectification/ cleaning shall be done by aai pvt. staff) without any extra charge/cost. note - please refer detailed glf inventory of kushinagar international airport as mentioned in attached annexure - i before quoting the price. , supply of following components of airfield ground lighting (agl) fixtures as per site requirements. filter (amber) runway edge light - inset fittings of ocem make , supply of following components of airfield ground lighting (agl) fixtures as per site requirements. filter (green) for threshold light - inset fittings of ocem make , supply of following components of airfield ground lighting (agl) fixtures as per site requirements. filter (green) for threshold light - inset fittings of you yang make , supply of following components of airfield ground lighting (agl) fixtures as per site requirements. filter (red) for end light - inset fittings of ocem make , supply of following components of airfield ground lighting (agl) fixtures as per site requirements. filter (red) for end light - inset fittings of you yang make , supply of following components of airfield ground lighting (agl) fixtures as per site requirements. prism for inset light fitting (rwy edge , end & threshold) - ocem make , supply of following components of airfield ground lighting (agl) fixtures as per site requirements. prism for inset light fitting (rwy edge , end & threshold) - you yang make , supply of following components of airfield ground lighting (agl) fixtures as per site requirements. innerlens (clear) 360 degree for rwy edge lights , supply of following components of airfield ground lighting (agl) fixtures as per site requirements. reflector for ama make uni-directional elevated type approach lights , supply of following components of airfield ground lighting (agl) fixtures as per site requirements. clear spreader lens for ama make uni-directional elevated type approach lights , supply of following components of airfield ground lighting (agl) fixtures as per site requirements. 1 w led driver along with blue lamp for elevated taxiway/isolation bay lights , supply of following components of airfield ground lighting (agl) fixtures as per site requirements. led lamp (blue) for omni directional inset apron lights - you yang make , supply of following components of airfield ground lighting (agl) fixtures as per site requirements. electronic driver for omni directional inset apron lights - you yang make , supply of following components of airfield ground lighting (agl) fixtures as per site requirements. rubber gasket for papi boxes , ama make , again carrying out /making in-field measurement/testing of intensity , beam spread/coverage , orientation , chromaticity , luminous factor , setting of field alignment , toeing angle , elevation angle as per the requirement of site & icao/civil aviation requirement (car) section-4 aerodrome standard & licensing series b part-i for balance fixtures(chargebale basis qty) inset/ elevated type approach , runw
Tender For supply of rubber stopper pad with bearing plate on axle box crown to rdso drg. no. sk - 97068 alt.3, item- 1. matl. & specn. for item a of item 1 is is:2062/2011 with amndt. no. 1 of nov. 2012, gra d e e250cu quality-c remaining item-b of item-1 is as per drg. [ warranty period: 30 months after t he date of delivery ]
Tender For supply of silicon rubber compound (ke45 rtv-r of shin-etsu or anabond 685 of anabond) colour clear confirming to spec no. ao 113, alt-a (shelf life 12 month) specn: spec no. ao 113, alt-a [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ]
Tender For supply of abrasion resistant rubber sheet one side nylon fabric finish , specific gravity 1.3, hardness 45 (+/-2) off white in color, size -1000 x 2500 x 3 mm thick, item code-02330284 or similar to suit airless c entrifugal shot blasting machine rotary table type, model t/t-2400 spl [ warranty period: 30 months aft er the date of delivery ]
Tender For supply of " set of nitrile rubber gasket for three phase loco main transformer one set consisting of -(i) 06 items in 38 nos. material and sources of procurement should be as per rdso t.c. no.- elrs/tc/0 076 (rev.-2) dt.- 1.10.2019 & item details as per sketch no.- elw/bsl/3-ph/sk no 304 (alt.-3). (ii) 06 i tems in 62 nos. material and sources of procurement should be as per rdso t.c. no.- elrs/tc/0076 (r ev.-2) dt.- 1.10.2019. item details as per enclosed annexure no.- nitrile-hnbr-1 .(make-abb,bhel,cg l,emco, high volt, stesalit, bombay oil seal, nu-cork, cortica, talbros, bharat corrub, indian cork)". [ warranty period: 30 months after the date of delivery ]
Tender For supply of set of different types of rubber hoses for mr-300 series ac rakes of kolkat a metro. each set consists of the following items. 1) 3/8" id hose as per en853-1sn for pi ston valve as per drg.no.mr/poh-3-5-0119 alt. c (item no.1) with connector/nipple as per drg. no. mr/poh-3-5-0120 alt. b - 16 nos. 2) 1/4" id hose (b16) as per en853-1sn for service & parking brake (bogie to body) as per drg.no.mr/poh-3-5-0119 alt. c (item no.2) with con nector/nipple as per drg.no.mr/poh-3-5-0120 alt. b - 16 nos. 3) 1/2" id hose (c04) as per en 854-2te for service brake tbu as per drg.no.mr/poh-3-5-0119 alt. c (item no.3) with conne ctor/nipple as per drg.no.mr/poh-3-5-0122 alt. b - 64 nos. 4) 1/2" id hose as per en853-1sn for 20ltrs reservoir & air bellow as per drg.no.mr/poh-3-5-0119 alt. c (item no.4) with c onnector/nipple as per drg.no.mr/poh-3-5-0122 alt. b - 80 nos. 5) 1/4" id hose (c05) as per en854-2te for service & parking brake tbu as per drg.no.mr/poh-3-5-0119 alt. c (item no.5 ) with connector/nipple as per drg.no.mr/poh-3-5-0120 alt. b- 32 nos. 6) 3/4" id hose as per en853-1sn for ass incoming hose as per drg.no.mr/poh-3-5-0119 alt. c (item no.6) with co nnector/nipple as per drg. no. mr/poh-3-5-0121 alt. a - 16 nos. 7) 5/8" id hose (b13) as per en854-2te for bogie to body bc pipe line as per drg.no.mr/poh-3-5-0119 alt. c (item no.7) with connector/nipple as per drg.no.mr/poh-3-5-0121 alt. a - 16 nos. 8) 3/8" id hose as per en853-1sn for pressure gauges (mr/bp & ar/bc) with connector/nipple as per drg.no.mr/p oh/ac-3-5-013 alt. a - 12 nos. 9) 1" id hose (a02) sae 100r7 for vv-120 motor compressor wi th connector/nipple as per drg.no.mr/poh/ac-3-5-014 alt. c - 4 nos. 10) hose and hose cla mp for vv-120 compressor as per drg.no.mr/poh/ac-3-5-016 [01packet consists of hose l- 60(item-1 of drg)-01no, hose l-40(item-2 of drg)-1no and hose clamp(item-3 of drg)-4nos ]
Tender For supply of rubber goods insugar mill. - rubber bush id x od x length 50/55 x 90 x 80 mm. , 55 x 100 x 80 mm., 58 x 115 x 30/28 mm., 55 x 110 x 35/20 mm., 5/8 x 1 x 1 , neoprine rubber bush ordinary 30 x 48 x 50 mm. , 20 x 35 x 35 mm., 30 x 62 x 14/16 mm., x 1,3/4 x 2 , 5/16 x 1 x 1 , x 1 x 2 , 7/8 x 1 7/8 x 1 7/8 , 1 1/4 x 2 x 2 , 5/8 x 1 1/4 x 2 , 3/4 x 1 x 2 , 1 2 x 2 x 2 , x 2 x 2 , 3/4 x 1 x 2 , 5/8 x 1 x 2 , 5/8 x 1 x 2 , x 1 x 2 , x x 1 , x 1 x 1 , 3/8 x 1 x 1 , 7/8 x 1 x 1 , 1 x 2 x 2 , neoprine rubber bush ordinary 55 x 110 x 25/35, 45 x 90 x 18/20, 55 x 95 x 100, 55 x 90 x 100, 50 x 75 x 85, rubber buffer for d.c.-10, c/f machine. hardness-90 bhn, as per sample., gland ring for plough cylinder size- 35 x 22 as per sample big., - do - small., rubber bush taper washer, size: id-50 mm., od-70 mm.,l-82 mm., - do - size: id-35 mm., od-80 mm.,l-80 mm., wire breaded rubber hose pipe with both end nut., size: x 6 ., rubber coupler for bma mill hydraulic pump coupling. size: od-85 mm., id-65 mm., l-60 mm., rubber buffer for bw c/f. machine as per sample. (one ton) drawing no. 990813., rubber seat for butter fly valve as per sample for ng-700 c/f machine for 12 valve., v cut rubber seat for nk-1300 big., - do - medium., - do - small., rubber bucket 2 for separator cylinder as per sample for ng-700 c/f. machine., - do 3 for plough cylinder - do -, rubber bucket for pneumatic valve as per sample, rubber taper plug for 42 x 45 tube as per drawing., - do - for 39 x 42 mm. do -, - do - for 47 x 50 mm. do -, rubber seat for juice heater vapour exhaust valve suitable for 200 c, as per drawing no.200030616 item no. 1, od-570 mm., id-400 mm., sid-445mm., thickness: 30 mm. as per drawing. , item no. 2, od-500 mm., id-335 mm., sid-400 mm., thickness: 25 mm. as per drawing., item no.3, od-400 mm., id-265 mm., thickness: 30 mm. as per drawing., u coupling for nk-1300 c/f. machine as per sample., butyl rubber seat for nrv size- 465 x 365 x 30 mm., neoprine rubber seat as per thickness thickness dia (a) x 3 , (b) x 4 , (c) x 5 , (d) x 6 , (e) x 7 , (f) x 9 , synthetic rubber seat od-20 , wire thick. 1 butyle rubber., rubber bucket 2 cylinder, - do 3 cylinder., - do - 4 cylinder, urethene star for ng-700 c/f. machine 8 arm.,, - do - 10 arm., - do - 1 ton - do -, neoprine rubber seet for angle valve bore-20 mm.thick-25, od-125 mm., neoprine rubber seat different size., (a) neoprine rubber seat for juice heater double beat valve as per drawing no. 20020724. item no.1., od-240 mm., id-30 mm., thick-12.7 mm. as per drawing., (b) item no. 2- vapour line j.h. double beat valve. od-240 mm., id-30 mm., thick-25.4 mm. as per drg. , rubber seat for semikestnor exhaust valve as per drawing no. bcsf/20020727., rubber seat for vapour cell exhaust valve as per drawing no. bcsf/20020726, rubber strip for juice heater as per drg. no. 2002082/c.l. item no.2. size: 15 x 17 x 18 mm., mud seal - do - as per drg. no. 2002082/c.l. item no.1, rubber seat as per drg. no. bcsf/20020810. item no.1- for semikestner vapour outlet valve. size:od-965 mm. id-735 mm., thick-35 mm. as per drg. , item no.2- kiw 1st body exhaust valve. seze: od-890 mm. id-700 mm. thick-30 mm. as per drawing. , item no.3- kiw 1st body vapour valve. size: od-970., id-710 mm., thick-30 mm. as per drawing. , item no.4- semikestner vapour valve to pan. size: od-1050 mm., id-980 mm., thick-35 mm. as per drg., item no.5- vapour cell vapour valve to pan. size: od-1050 mm. id-790 mm. thick-30 mm. as per drg. , item no.6- wil & bma quad 1st body vapour valve. size: od-910, id-690 mm., thick-30 mm. as per drg. , item no.7- wil 1st body exhaust valve . size: od-650 mm. id-450 mm. thick-25 mm., as per drawing. `, item no.8- kiw 2nd body vapour bleeding valve. size: 670 mm. id-550 mm., thick-35 mm. as per drawing. , item no.9- kiw quad man hole top. size: od-530 mm., id-450 mm., thick-25 mm., as pe drawing., item no.11- wil quad man hole top. size: od-585 mm., id-475 mm., thick-20 mm. as per drawing. , it